Helical pitch of m-phenylene ethynylene foldamers by double spin labeling

To investigate the helical conformation of oligo(m-phenylene ethynylene)s, a pair of TEMPO spin labels were appended to the backbone. The two TEMPO radicals were separated by the four, five, and six repeating units. ESR spectra of the labeled oligomers were measured in chloroform and in ethyl acetate solvents in which the oligomers are disordered and folded, respectively. The measurement and analysis of ESR spectra revealed that six repeating units make one helical turn.     

Vibronic structures in the electronic spectra of oligo(phenylene ethynylene): effect of m-phenylene to the optical properties of poly(m-phenylene ethynylene)

At the low temperature, hidden vibronic structures are successfully resolved in the absorption and emission spectra of oligo(phenylene ethynylene)s 3-5. Identification of the hidden bands allows estimation of the vibrational energy gaps in these molecules, which appears to increase with the oligomer conjugation length. The remarkable similarity between the absorption profiles of diphenylacetylene (3) and 1,3-bis(phenylethynyl)benzene (5), especially at -198 degrees C, confirms the effectiveness of conjugation interruption at m-phenylene. The function of precise conjugation length control via m-phenylene is further demonstrated from poly(m-phenylene ethynylene) (PmPE) (6). Even though the number of recurring unit (phenylene ethynylene) increases from 2 (for 5) to 12 (for 6), the absorption and emission spectra of the latter are nearly identical to that of the former.     

Sequence-specific binding of m-phenylene ethynylene foldamers to a piperazinium dihydrochloride salt

[reaction: see text] Binding properties of a series of isomeric m-phenylene ethynylene oligomers containing short amide sequences to a piperazinium dihydrochloride salt were investigated by using circular dichroism (CD) measurements. Although these isomeric oligomers exhibited similar helical conformations, high affinity was observed only for one oligomer. This behavior is presumably controlled by the orientation of amino groups of the amide sequence and the folded conformation of the oligomer.     

Backbone-rigidified oligo(m-phenylene ethynylenes)

Oligo(m-phenylene ethynylenes) (oligo(m-PE)) with backbones rigidified by intramolecular hydrogen bonds were found to fold into well-defined conformations. The localized intramolecular hydrogen bond involves a donor and an acceptor from two adjacent benzene rings, respectively, which enforces globally folded conformations on these oligomers. Oligomers with two to seven residues have been synthesized and characterized. The persistence of the intramolecular hydrogen bonds and the corresponding curved conformations were established by ab initio and molecular mechanics calculations, 1D and 2D (1)H NMR spectroscopy, and UV spectroscopy. Pentamer 5, hexamer 6, and heptamer 7 adopt well-defined helical conformations. Such a backbone-based conformational programming should lead to molecules whose conformations are resilient toward structural variation of the side groups. These m-PE oligomers have provided a new approach for achieving folded unnatural oligomers under conditions that are otherwise unfavorable for previously described, solvent-driven folding of m-PE foldamers. Stably folded structures based on the design principle described here can be developed and may find important applications.     

Solid-phase synthesis of oligo(p-benzamide) foldamers

[reaction: see text] A coupling protocol has been developed which allows the synthesis of oligo(p-benzamide)s on solid support. Aromatic carboxylic acids are activated in situ with thionyl chloride and used to acylate secondary aromatic amines. N-p-Methoxy benzyl (PMB) as well as N-hexyl protected monomers were investigated. Heterosequences of both monomers were synthesized. Such nanoscale objects are important building blocks for supramolecular chemistry.     

Molecular junctions based on SAMs of cruciform oligo(phenylene ethynylene)s

Cruciform oligo(phenylene ethynylene)s (OPEs) with an extended tetrathiafulvalene (TTF) donor moiety (OPE5-TTF and OPE3-TTF) and their simple analogues (OPE5-S and OPE3) without conjugated substituents were used to form high-quality self-assembled monolayers (SAMs) on ultraflat gold substrates. Molecular junctions based on these SAMs were investigated using conducting-probe atomic force microscopy (CP-AFM). The TTF substituent changes the molecular orbital energy levels and decreases the HOMO-LUMO energy gap, resulting in a 9-fold increase in conductance for both TTF cruciform OPEs compared to the unsubstituted analogues. The difference in electrical transport properties of the SAMs was reproduced by the theoretical transport calculations for the single molecules.     

Combinatorial synthesis of oligo(phenylene ethynylene)s

The combinatorial synthesis of oligo(phenylene ethynylene) tetramers, both in solution and on solid support, is described. These products are of interest for molecular electronics applications. An iterative sequence, coupling of aryl halides to alkynes under Sonogashira conditions, was used. Five monomers functionalized with electron-donating or electron-withdrawing groups were synthesized, and used to generate a library of 25 trimers in a solution-phase based process. A library of 24 tetramers was prepared by subsequent protodesilylation and coupling with the alligator clip 4-iodo-1-thioacetylbenzene. The solution-phase based sequence was successfully adapted to a higher yielding directed split-and-pool solid-phase process, with average yields of 78–86% for each step over seven steps. A triazene linker group was used to attach the starting monomer to the polymer beads. At the completion of the solid-phase-based process, traceless cleavage of trimers from the resin was achieved by sonication of the resin in 10% HCl/THF solution. The released products were then poised for the final step in the sequence, attachment of the alligator clip.     

Towards photocontrol over the helix-coil transition in foldamers: synthesis and photoresponsive behavior of azobenzene-core amphiphilic oligo(meta-phenylene ethynylene)s

Introduction of photochromic azobenzene units into amphiphilic oligo(meta-phenylene ethynylene)s allowed photocontrol over the helix-coil transition in this important class of foldamers. Two design principles were followed in efforts to accommodate cis- and trans-azobenzene moieties within the helical structure to selectively turn the helical state on and off, respectively. Several oligomer series with varying connectivities to the central azobenzene chromophore were synthesized and these photochromic oligomers were investigated with regard to their folding behavior in both dark and irradiated states. Both the foldamers' chain lengths and the electronic structures of the azobenzene moieties had to be optimized to ensure folding differences and selective excitation of the photochrome. The design of such stimuli-responsive macromolecules, displaying large structural changes upon irradiation, should guide the design of future materials in, for example, "smart" delivery applications.     

A new strategy for folding oligo(m-phenylene ethynylenes)

Backbone-rigidified oligo(m-phenylene ethynylenes) fold into crescent or helical conformations in non-polar organic solvents.     

Solid-phase synthesis of m-phenylene ethynylene heterosequence oligomers

Both homo- and heterosequence m-phenylene ethynylene oligomers are synthesized using a conceptually simple iterative solid-phase strategy. Oligomers are attached to Merrifield's resin through a known triazene-type linkage. The phenylene ethynylene molecular backbone is constructed through a series of palladium-mediated cross-coupling reactions. The strategy employs two types of monomers that bear orthogonal reactivity, one being a monoprotected bisethynyl arene and the other being a 3-bromo-5-iodo arene. The catalyst conditions are tailored to the requirements of each monomer type. The monoprotected bisethynyl arene is coupled to the growing chain in 2 h at room temperature using a Pd(I) dimer precatalyst ((t)Bu3P(Pd(mu-Cl)(mu-2-methyl allyl)Pd)P(t)Bu3) in conjunction with ZnBr2 and diisopropylamine. In alternate steps, the resin is deprotected in situ with TBAF and coupled to the 3-bromo-5-iodo arene using the iodo selective Pd(tri-2-furylphosphine)4 catalyst in conjunction with CuI and piperidine; this reaction is also completed in 2 h at room temperature. These cross-coupling events are alternated until an oligomer of the desired length is achieved. The oligomer is then cleaved from the resin using CH(2)I(2)/I(2) at 110 degrees C and purified using preparatory GPC. Using this method, a series of homo- and heterosequence oligomers up to 12 units in length in excellent yield and purity were synthesized on the 100 mg scale. Longer oligomers were attempted; however, deletion sequences were found in oligomers longer than 12 units.     

Electrochemical gate-controlled conductance of single oligo(phenylene ethynylene)s

We have studied electron transport properties of unsubstituted oligo(phenylene ethynylene) (OPE) (1) and nitro-substituted OPE (2) covalently bound to two gold electrodes. The conductance values of single 1 and 2 are approximately 13 and approximately 6 nS, respectively. In addition to a decrease in the conductance, the presence of the nitro moiety leads to asymmetric I-V characteristics and a negative differential resistance-like (NDR-like) behavior. We have altered the nitro-substituted OPE by electrochemically reducing the nitro group and by varying the pH of the electrolyte. The conductance decreases linearly with the electron-withdrawing capability (i.e., Hammett substituent values) of the corresponding reduced species. In contrast, the conductance of 1 is independent of the pH and the electrode potential.     

Diamine anchored molecular junctions of oligo(phenylene ethynylene) cruciform

Using diamine as anchoring group, the self-assembled monolayers (SAMs) based on oligo(phenylene ethynylene)s (OPEs) and cruciform OPEs with an extended tetrathiafulvalene (TTF) (OPE3 and OPE3-TTF) were successfully formed on the Au substrate and then utilized in molecular junctions by conductingprobe atomic force microscopy (CP-AFM).     

Synthesis and self-association of an imine-containing m-phenylene ethynylene macrocycle

The purpose of this study was to test the suitability of the imine bond as a structural unit within the backbone of phenylene ethynylene macrocycles and oligomers by determining the ability of m-phenylene ethynylene macrocycle 1 to form pi-stacked aggregates in both solution and the solid state. Macrocycle 1, with two imine bonds, was synthesized in high yield from diamine 4 and dialdehyde 5. The imine-forming macrocyclization step was carried out under a variety of conditions, with the best yield obtained simply by refluxing the reactants in methanol. The self-association behavior of 1 in various solvents was probed by (1)H NMR. The association constants (K(E)) in acetone-d(6) and tetrahydrofuran-d(8) were determined by fitting the concentration-dependent chemical shifts with indefinite self-association models. The results showed that solvophobically driven intermolecular pi-pi stacking could be preserved in the imine-containing m-phenylene ethynylene macrocycles. Interestingly, in acetone macrocycle 1 exhibited a stronger tendency to form a dimer rather than higher aggregates. We postulate that this behavior may be due to electrostatic attraction between dipolar imine groups. The solid-state packing of 1 was studied by wide- and small-angle X-ray powder diffraction (WAXD and SAXD). Bragg reflections of 1 were consistent with a hexagonal packing motif similar to our previous studies on m-phenylene ethynylene macrocycles that formed columnar liquid crystal phases.     

Synthesis and characterization of X-shaped oligo(para-phenylene)derivatives functionalized with fluorene ethynylene

<正>A series of linear and X-shaped oligo(para-phenylene) derivatives functionalized with fluorene ethynylenes 1,3 and 4 were synthesized through sequent Sonogashira coupling and Suzuki-Miyaura reaction in high yield.The electron-donating group-OCH_3 and electron-withdrawing counterparts-CF_3 were introduced to tune the spectra properties of compounds 3 and 4.The detail investigation of their photophysical properties in solution and film indicated that the introduction of both -OCH_3 and -CF_3 makes maximum emission distinct red-shift in comparison with parent compound 1,but the latter more prominently.     

Hydrogen bond-stabilized helix formation of a m-phenylene ethynylene oligomer

[reaction: see text] Incorporation of a single hydrogen bonded beta-turn mimic in the backbone of a m-phenylene ethynylene oligomer is shown to affect the thermodynamic properties of the folding reaction. Oligomers 1 and 2 both undergo solvophobic helix formation, but hydrogen bonded oligomer 1 was found to form a more stable helix with a higher tolerance to solvent denaturation than isomeric, non-hydrogen bonded oligomer 2.     

Conformational ordering of apolar, chiral m-phenylene ethynylene oligomers

A series of m-phenylene ethynylene oligomers containing nonpolar, (S)-3,7-dimethyl-1-octanoxy side chains have been synthesized and studied. In apolar alkane solvents, oligomers of sufficient length (n > 10) were found to adopt a helical conformation with a large twist sense bias. In contrast, in chloroform the oligomers adopt a random coil conformation. Surprisingly, the strong twist sense bias was determined to be highly time dependent and is partially attributed to intermolecular aggregation.     

Halide-guided oligo(aryl-triazole-amide)s foldamers: receptors for multiple halide ions

We synthesized and characterized a series of oligo(phenyl-amide-triazole)s that can fold into a helical conformation guided by halide ions. Their binding models and affinities are highly dependent on the length of the foldamer, media and the inducing capability of halide ions. The short foldamer with one helical turn shows a 1:1 binding stoichiometry to all halides, while the longer foldamer with two or three helical turns in principle can form 1:2 complexes with chloride anions even bromide anions with an enhancement on binding affinities. A result of quantitative NOE calculations imply that the longer foldamer should increase its helical pitch so as to release the electrostatic repulsion between halide ions.     

Self-assembly of folded m-phenylene ethynylene oligomers into helical columns

Circular dichroism spectroscopy has been used to study the self-assembly of two series of m-phenylene ethynylene oligomers in highly polar solvents. The helical conformation of shorter oligomer lengths was found to be stabilized in aqueous acetonitrile solutions, while longer oligomers began to interact intermolecularly. The intermolecular aggregation of the oligomers in aqueous solutions revealed a chain length dependent association that required the presence of a stable helical conformation. Evidence for intermolecular interactions is provided by Sergeants and Soldiers experiments in which the twist sense bias of a chiral oligomer is transferred to an achiral oligomer.