四元体系Li2O-MgO-B2O3-H2O在40℃时溶解度的研究

我国柴达木盐湖近期研究表明:新类型盐湖卤水可以近似地的看作是天然的(Li)、Na~ 、K~ 、Mg~(2 )Cl~-、SO_4~(2-)、B_4O_7~(2-)-H_2O的多元水盐体系。新类型硼酸盐卤水经日晒蒸发析盐后,得到的氯化镁饱和卤水中钠和钾的含量甚少,可以被看作是Li~ 、Mg~(2 )Cl~-、SO_4~(2 )、B_4O_7~(2-)-H_2O五元水盐体系。研究它,不仅可以丰富水盐溶液化学、锂盐化学和硼酸盐化     

Pseudo Jahn-Teller origin of cis-trans and other conformational changes. The role of double bonds

Based on the pseudo Jahn-Teller effect (PJTE) theory, an approach is developed to rationalize and predict the conformations and conformational changes in molecular systems with a common pattern, a double bond. It is shown that starting with the high-symmetry geometry of the environment (in many cases D(2d)), the double bond descends from an e(2) electronic configuration (e is a twofold degenerate MO) which produces a variety of PJT distortions, the main of which is the rotational (b(1)) transformation D(2d) → D(2h) accompanied by the formation of the double bond. Further PJT interactions with higher energy E-states may trigger additional distortions which in D(2h) symmetry are classified as in-plane (e(i)) cis and trans, and out-of-plane (e(o)) chair and boat. The realization of these conformations depends on the positions of the excited E-states and the PJTE parameter values. The two emerging PJTE problems, ((3)A(2) + (3)E(1) + (3)E(2)) ? (e(i) + e(o)) and ((1)A(1) + (1)B(1) + (1)B(2) + (1)E(1) + (1)E(2)) ? (b(1) + e(i) + e(o)), are formulated in the matrix form and provide a general picture of the ground and excited adiabatic potential energy surfaces. Following this scheme in combination with ab initio calculations, the possible conformations and conformational transitions are analyzed for several specific systems including (in increasing complexity) N(2)H(2), C(2)H(4), N(2)(NH(2))(2) and N(2)(C(6)H(5))(2) (azobenzene). The family of molecular systems with a double bond is vast, but the importance of the PJT approach developed here is also in its general validity as it can be applied to any other systems.     

Selected Reactions of Diethyl (E)‐1‐(bromomethyl)‐2‐cyanovinylphosphonate with Secondary and Tertiary Amines

An easy regio‐ and stereoselective synthesis of new nitrogenous molecules 2a–e was successfully realized via an effective coupling reaction of diethyl (E)‐1‐(bromomethyl)‐2‐cyanovinylphosphonate 1 with various secondary amines in methanol. Hence, the use of less and more bulky secondary amines gives rise, respectively, to the successive (S_N2′) substitution–isomerization and (S_N2) substitution derivatives 2a–c and 2d–e . Moreover, the addition of tertiary amines to 1 in the same reaction conditions, leads exclusively to the rearranged vinyl ether 3 in good yields.     

Silver mediated acetylenic oxy cope rearrangement

Electrophile initiated acetylenic oxy Cope rearrangement of diversely substituted 5-Hexen-1-yn-3-ols leads to the corresponding α,δ-diethylenic aldehydes or ketones in good yields with mainly the E configuration for both double bonds.Silver nitrate and Silver trifluoromethanesulfonate appear to be the most suitable electrophiles for this purpose and can be used either stoichiometrically (AgTf) or catalytically (AgN0₃).     

Oxidation of ethyne and But-2-yne. 2. Master equation simulations

The aim of this study is to improve understanding of the tropospheric oxidation of ethyne (acetylene, C2H2) and but-2-yne, which takes place in the presence of HO and O2. The details of the potential energy hypersurface have been discussed in a previous article [Maranzana et al., J. Phys. Chem. A 2008, 112, XXXX]. For both molecules, the initial addition of HO radical to the triple bond is followed by addition of O2 to form peroxyl radicals. In both reaction systems, the peroxyl radicals take two isomeric forms, E1 and E2 for ethyne and e1 and e2 for but-2-yne. Energy transfer parameters (alpha = 250 cm-1) for the ethyne system were obtained by simulating laboratory data for N2 buffer gas, where O2 was not present. In simulations of C2H2 + HO when O2 is present, E1 reacts completely and E2 reacts almost completely, before thermalization. Radical E1 produces formic acid ( approximately 44%) and E2 gives glyoxal ( approximately 53%), in quite good agreement with experiments. For but-2-yne, pressure-dependent laboratory data are too scarce to obtain energy transfer parameters directly, so simulations were carried out for a range of values: alpha = 200-900 cm-1. Excellent agreement with the available experimental yields at atmospheric pressure was obtained with alpha = 900 cm-1. Two reaction channels are responsible for acetic acid formation, but one is clearly dominant. Biacetyl is produced by reactions of e1 and, to a minor extent, e2. The peroxyl radical e2 leads to less than 8% of all products. Vinoxyl radical (which has been reported in experiments involving C2H2 + HO) and products of its reactions are predicted to be negligible under atmospheric conditions.     

A Simple Synthesis of (E) 5-Arylidene 5,6-Dihydro Uracils and (E) 5-Arylidene 2-Thioxo 5,6-Dihydro Uracils

The reaction of (E) methyl 3-aryl 2-isopropyl aminomethyl 2 propenoates with phenylisocyanate or phenyl isothiocyanate followed by a treatment with sodium hydroxide under phase transfer conditions leads to (E) 5-arylidene 5,6-dihydrouracils or (E) 5-arylidene 2-thioxo 5,6-dihydro uracils. No isomerisation of the double bond occurs during the reactions.     

Dissociative double ionization of 1-bromo-2-chloroethane irradiated by an intense femtosecond laser field

The dissociative double ionization and multi-photon ionization of 1-bromo-2-chloroethane (BCE) irradiated by the 800 nm femtosecond laser field have been investigated by dc-slice imaging technology. The charged parent ion ratio [BCE(2+)]/[BCE(+)] was measured, and the corresponding ionization process including non-sequential double ionization and sequential double ionization was analyzed. The sliced images of different photo-dissociated ions were detected, and the corresponding kinetic energy release (KER) distributions were calculated and extracted. Furthermore, the dissociative double ionization channels, attributed to the cleavage of the C-C, C-Br, and C-Cl bonds by the Coulombic repulsive forces, were discussed, and the revised equilibrium distance R(e)*, the energy ratio E(exp)/E(coul), and the value a=√(R(e)*)/(E(exp)/E(coul)) were calculated.     

去甲肾上腺素电极过程的圆二色谱电化学研究

现场圆二色薄层光谱电化学研究去甲肾上腺素的电化学氧化还原过程 .研究表明去甲肾上腺素 ( pH =7.0磷酸缓冲溶液中 )在玻碳电极上经历了不可逆的电化学氧化 ,且遵从后行化学反应 (EC)机理 ,去甲肾上腺素醌和去甲肾上腺素红的再还原遵从简单电子转移 (E)机理 .由双对数法获得去甲肾上腺素电化学氧化的式电位为E10’=0 .2 0V ,电子转移系数和电子转移数之积为αn =0 .38,标准复相电极反应常数k10 =1 .2× 1 0 -4 cm·s-1.去甲肾上腺素醌和去甲肾上腺素红的电化学还原反应参数分别为E2 0’=0 .2 5V ,αn =0 .37,k2 0 =4.4× 1 0 -5 cm·s-1和E3 0’=- 0 .2 5V ,αn =0 .33,k3 0 =1 .1× 1 0 -4 cm·s-1.     

Cycloaddition of benzothiete and electron-deficient nitriles

The o-quinoid 8π electron system 2 , generated by thermal ring opening of benzothiete ( 1 ), enters regio-specific [8π + 2π] cycloaddition reactions with electron-deficient nitriles 3a-d , yielding the 4H-1,3-benzothiazines 4a-d. A competitive dimerization of 1 leads to 1,5-dibenzo[b,f]dithiocin (5). Depending on the nitrile further competitive or subsequent reactions (2 + 3b → 7b, 2 + 3d → 4d → 8d) can occur. The cycloadducts 10e and 11e gained from 3e anticipate a primary cleavage of 3e to methylisothiocyanate 9e which reacts at the C?N double bond as well as at the C?S double bond.     

Synthese stereoselective de dienes conjugues a partir d'alcools α-alleniques

The reaction of a Grignard reagent with an α-allenic phosphate leads exclusively in every studied case to 1,3-dienes. An high stereoselectivity is observed for the formation of both double bonds ; particularly, the organometallic species attacks preferentially in a trans direction from a groupe located on the terminal allenic carbon. In the case of the esters of secondary alcohols, it is more difficult to determine the factors which govern the stereochemistry of the other double bond. The Z configuration is then favored in the reaction phosphate + RMgX but the E configuration is predominant in the reaction acetate + R₂CuLi.     

Tributylphosphine Catalyzed O -Vinylation of 3-Hydroxy-2-methyl-4 H -pyran-4-one

Protonation of the highly reactive 1:1 intermediates produced in the reaction between tributylphosphine and dimethyl acetylenedicarboxylate by 3-hydroxy-2-methyl-4 H -pyran-4-one leads to vinyltributylphosphonium salts, which undergo an addition-elimination reaction in CH 2 Cl 2 at room temperature to produce dimethyl 2-[(2-methyl-4-oxo-4 H -pyran-3-yl)oxy]-2-butenedioate (1:1 mixtures of E and Z isomers) in fairly good yields.     

Variation of the capacity characteristics of a composite material consisting of acetylene black and polytetrafluoroethylene and of its wettability with an aqueous solution under the action of anodic current

The effect exerted by treatment with cyclic anodic current in 1 M H₂SO₄ in the interval 0.0–2.0 V on electrodes made of a porous (55 vol %) composite material consisting of A-437E acetylene black and polytetrafluoroethylene (60 wt %) was studied. The cyclic volt–ampere curves were recorded in 3 M KOH and 1 M H₂SO₄ to determine the double layer capacity. The anodic treatment leads to an increase in the volume of pores filled with the electrolyte and in the electrical capacity of the electrode due both to an increase in the area of the surface wetted with the electrolyte and to the pseudocapacity caused by oxidation of the carbon black surface.     

PdI2-catalyzed coupling-cyclization reactions involving two different 2,3-allenols: an efficient synthesis of 4-(1',3'-dien-2'-yl)-2,5-dihydrofuran derivatives

Transition-metal-catalyzed dimeric coupling-cyclization reactions of two different 2,3-allenols afforded 4-(1',3'-dien-2'-yl)-2,5-dihydrofuran derivatives 3. 2-Substituted 2,3-allenols 1 cyclized to form the 2,5-dihydrofuran ring, whereas the 2-unsubstituted 2,3-allenols 2 provided the 1,3-diene unit at the 4-position. The reaction is proposed to proceed through an oxypalladation, insertion, and beta-hydroxide elimination process. The C=C double bond was formed with high E stereoselectivity by beta-hydroxide elimination.     

Reactions of 16e CpCo half-sandwich complexes containing a chelating 1,2-dicarba-closo-dodecaborane-1,2-dichalcogenolate ligand with ethynylferrocene and dimethyl acetylenedicarboxylate

The reaction of the 16e half-sandwich complex [CpCo(S2C2B10H10)] (1S; Cp: cyclopentadienyl) with ethynylferrocene in CH2Cl2 at ambient temperature leads to [CpCo(S2C2B10H9)-(CH2CFc)] (2S; Fc: ferrocenyl) and 1,2,4-triferrocenylbenzene. In 2S, B substitution occurs at the carborane cage in the position B3/B6 with the formation of a C-B bond. In the presence of the protic solvent MeOH, 2S loses a CpCo fragment to generate [(CH2CFc)(S2C2B10H9)] (3S). On the other hand, 2S can take a free CpCo fragment to form [(CpCo)2(S2C2B9H8)-(CHCFc)] (4S) containing a nido-C2B9 unit. In sharp contrast, [CpCo-(Se2C2B10H10)] (1Se) does not react with the alkyne in CH2Cl2, but in MeOH [(CHCFc)(Se2C2B10H10)] (5Se) is generated without the presence of a CpCo unit. The reaction of 1 with dimethyl acetylenedicarboxylate at ambient temperature leads to insertion compounds [CpCo(E2C2B10H10){(MeO2C)-C=C(CO2Me)}] (6S, E=S; 6 Se, E=Se). Upon heating, 6S rearranges to two geometrical isomers [CpCo(S2C2B10H9){(MeO2C)C=CH(CO2Me)}] (7S) and [CpCo(S2C2B10H9){(MeO2C)-CHC(CO2Me)}] (8S). In both, B-H functionalization takes place at the carborane cage in the position B3/B6, but 7S is a 16e complex with an olefinic unit in a Z configuration, and 8S is an 18e complex containing an alkyl B-CH group. Further treatment of 7 S with dimethyl acetylenedicarboxylate at ambient temperature affords two B-disubstituted complexes at the carborane cage in the positions of the B3 and B6 sites, that is, [CpCo(S2C2-B10H8){(MeO2C)C=CH(CO2Me)}2] (9S) and [CpCo(S2C2B10H8){(MeO2C)-CHC(CO2Me)}{(MeO2C)C=CH-(CO2Me)}] (10S). Compound 9S is a 16e complex with two olefinic units in E/E configurations, whereas 10S is an 18e species containing both an olefinic substituent and an alkyl B--CH unit. The reaction of 7S with methyl acetylenemonocarboxylate at ambient temperature leads to the sole 16e compound [CpCo(S2C2B10H8){CH=CH(CO2Me)}-{(MeO2C)C=CH(CO2Me)}] (11S). In contrast, 6Se does not rearrange. All new complexes 2S-4S, 5Se, 6Se, and 7S-11S were characterized by NMR spectroscopy (1H, 11B, 13C) and X-ray structural analyses were performed for 2S-4S, 5Se, 6Se, and 7S-9S.     

Efficient pi-facial control in the ene reaction of nitrosoarene,triazolinedione, and singlet oxygen with tiglic amides of the bornane-derived sultam as chiral auxiliary: an economical synthesis of enantiomerically pure nitrogen- and oxygen-functionalized acrylic acid derivatives

The ene reaction of 4-nitronitrosobenzene (ArNO), N-phenyl-1,2,4-triazoline-3,5-dione (PTAD), and singlet oxygen (1O2) with the optically active tiglic-acid derivatives of Oppolzer's bornane-derived sultam affords the respective ene products regioselectively in excellent diastereoselectivity (de up to 99%) and in good yield (55-90%). The enophiles ArNO and PTAD give with the methyl-substituted substrate exclusively the like-configured ene adduct, while 1O2 leads to an 83:17 diastereomeric mixture. With the sterically more demanding isopropyl-substituted derivative even the smallest enophile 1O2 forms exclusively the like diastereomer. The high diastereoselectivity is rationalized in terms of the proper conformational alignment of the substrate and a preferred enophilic attack from the C(beta)-re face of the double bond. This concept offers an efficient synthetic route to enantiomerically pure nitrogen- and oxygen-functionalized acrylic acid derivatives.     

Fluorescent penta- and hexaene fatty acids by a Wittig-Horner/elimination strategy

Molecular fluorescent probes have revolutionized biochemical and biophysical studies in the last decades, but with regard to lipids there has been a lack of combining the slim shape of saturated acyl chains with fluorescent properties. Our strategy to pentaene and hexaene fatty acids builds upon commercially available 4-(E)-decenal, which is subjected to a Wittig-Horner reaction after chlorination in α-position. DBU-mediated β-elimination of HCl proceeding the olefination establishes a highly conjugated system to which a salt-free Wittig reaction adds a final double bond leading to a good (Z)-selectivity of 83-86%. The double bond geometry can be optionally isomerized with I(2) to furnish the all-(E)-species. The five conjugated alkene moieties result in a longest-wavelength absorption maximum of about 350 nm. A red-shift to 380 nm was realized by addition of another double bond employing a common Wittig-Horner prolongation sequence. Stokes shifts of about 7300 and 7800 cm(-1), respectively, were observed.     

Intramolecular Pd-catalyzed carboetherification and carboamination. Influence of catalyst structure on reaction mechanism and product stereochemistry

The intramolecular Pd-catalyzed carboetherification of alkenes affords 2-indan-1-yltetrahydrofuran products in moderate to good yield with good to excellent levels of diastereoselectivity. The stereochemical outcome of these reactions is dependent on the structure of the Pd catalyst. Use of PCy(3) or P[(4-MeO)C(6)H(4)](3) as the ligand for Pd leads to syn-addition of the arene and the oxygen atom across the double bond, whereas use of (+/-)-BINAP or DPP-benzene affords products that result from anti-addition. The catalyst-induced change in stereochemistry is likely due to a change in reaction mechanism. Evidence is presented that suggests the syn-addition products derive from an unprecedented transannular alkene insertion of an 11-membered Pd(Ar)(OR) complex. In contrast, the anti-addition products appear to arise from Wacker-type anti-oxypalladation. Studies on analogous Pd-catalyzed intramolecular carboamination reactions, which afford 2-indan-1-ylpyrrolidines that result from syn-addition, are also described.     

The structure of the lowest electronic Rydberg state of CdAr complex determined by laser double resonance method in a supersonic jet-expansion beam

The lowest E1(3Sigma(+)) Rydberg state of the CdAr van der Waals (vdW) complex was investigated by means of an optical-optical double resonance (OODR) method of laser spectroscopy in conjunction with a free jet-expansion molecular beam. Two dye lasers were employed for the two-step excitation. The A0(+)(3Pi(+)) and B1(3Sigma(+)) states were used as intermediates in the excitation process from the X0(+)(1Sigma(+)) ground state. Two types of bound-bound excitation spectra of the E1<--A0(+) and E1<--B1 transitions were recorded indicating the existence of two, well defined minima in the E1-state potential energy (PE) curve. First, considerably deep, with the well depth of D(e)'(E1(2))=1309.0 cm(-1) and second, separated by a positive PE barrier, with D(e)'(E1(2))=24.2 cm(-1). Combination of bound-bound and first-time observed bound-free excitation spectra enabled a complete determination of the spectroscopical parameters of the PE curve of the E1-Rydberg state, the height of the PE barrier and its approximate location. In the excitation spectra of the E1<--B1 transition, a nodal structure of the bound-free transitions was observed and elucidated by a projection of the B1-state vibrational wave-functions onto the E1-state potential barrier and/or onto the repulsive part of the E1-state PE curve. The experimental results of our investigation coincides well with recently published results of ab initio calculation of Czuchaj and co-workers [Chem. Phys. 248 (1999) 1; Chem Phys. 263 (2001) 7; Theor. Chem Acc. 105 (2001) 219].     

Unexpected formation of (E)-4-alkene 1,3-diketones from the three-component reaction of lithium selenolates with 1-(1-alkynyl)cyclopropyl ketones and aldehydes

A novel three-component stereoselective synthesis of (E)-4-alkene 1,3-diketones from lithium selenolates, 1-(1-alkynyl)cyclopropyl ketones, and aldehydes is reported. This reaction afforded the products in moderate to good yields with the formation of a new C-Se single bond, a new C-C double bond, and a new C-O double bond.     

Chameleon reactivity of the allene bond of 4-vinylidene-2-oxazolidinone: novel through-space conjugative nucleophilic addition of electron-rich alkenes and hetero-nucleophiles

The Calpha==Cbeta double bond of allene carbamates 1 serves as an electron acceptor similar to the double bond of conjugated enones by means of a through-space interaction with the N--SO2 bond; the carbamate double bond is thus subject to nucleophilic addition for a wide variety of nucleophiles, which proceeds under mild conditions by heating at 70-100 degrees C. Depending on the kind of nucleophiles, 1 displays three different reaction modes: 1) Typically enol ethers and allylsilanes promote 1,3-sulfonyl migration of 1 and undergo the inverse electron demand Diels-Alder reaction with the 1-aza-1,3-butadiene intermediates II thus formed to furnish bicyclic 2-alkoxy-5-sulfonyltetrahydropyridines 2 and 2-silylmethyl-5-sulfonyltetrahydropyridines 3, respectively, with high regio- and stereoselectivity and retention of configuration of the double bonds of these electron-rich alkenes; 2) silanes (RnSiH4-n, n=1-3) and thiols deliver the hydride and the thiolate at the Cbeta carbon and promote the 1,3-sulfonyl migration, followed by protonation of the thus-formed carbamate anion (Z)-III to provide, for example, (Z)-4 a and (Z)-4 j, respectively; 3) alcohols simply add to the Calpha==Cbeta double bond and provide (E)-6. Usually, the reaction with alcohols is accompanied by the second pathway, giving rise to, for example, (Z)-4 b in addition to (E)-6 b. Phenol engages in the third pathway and provides (E)-6 g exclusively. Heteroaromatics, such as furans and benzofurans follow the first pathway, however, in a different regioselectivity from enol ethers and allylsilanes, delivering the oxygen atom at the 3-position of 5-sulfonyltetrahydropyridines (2 g and 2 h). Indoles, on the other hand, show a dichotomy, equally enjoying the first and the third pathways and provide mixtures of (E)-7 and (E)-8, respectively.