The non-halogen flame retardant epoxy resin based on a novel compound with phosphaphenanthrene and cyclotriphosphazene double functional groups

A novel flame retardant additive hexa-(phosphaphenanthrene -hydroxyl-methyl-phenoxyl)-cyclotriphosphazene (HAP-DOPO) with phosphazene and phosphaphenanthrene double functional groups has been synthesized from hexa-chloro-cyclotriphosphazene, 4-hydroxy-benzaldehyde and 9,10-dihydro-9-oxa-10- phosphaphenanthrene 10-oxide(DOPO). The structure of HAP-DOPO was characterized by Fourier transformed infrared (FT-IR) spectroscopy and ¹H nuclear magnetic resonance (¹H NMR) and ³¹P nuclear magnetic resonance (³¹P NMR). The additive HAP-DOPO was blended into diglycidyl ether of bisphenol-A (DGEBA) to prepare flame retardant epoxy resins. The flame retardant properties and thermal properties of the epoxy resins cured by 4, 4′-Diamino-diphenyl sulfone (DDS) were investigated from the differential scanning calorimeter (DSC), the thermogravimetric analysis (TGA), UL94 test, the limiting oxygen index (LOI) test and Cone calorimeter. Compared to traditional DOPO-DGEBA and ODOPB-DGEBA thermosets, the HAP-DOPO/DGEBA thermosets have higher T_gs at the same UL94 V-0 flammability rating for their higher crosslinking density and have higher char yield and lower pk-HRR at same 1.2 wt.% phosphorus content which confirm that HAP-DOPO has higher flame retardant efficiency on thermosets. The scanning electron microscopy (SEM) results shows that HAP-DOPO in DGEBA/DDS system obviously accelerate formation of the sealing, stronger and phosphorus-rich char layer to improve flame retardant properties of matrix during combustion.     

Synthesis, characterization, thermal properties and flame retardancy of a novel nonflammable phosphazene-based epoxy resin

Hexakis(4-hydroxyphenoxy)-cyclotriphosphazene (PN-OH) was synthesized through nucleophilic substitution of the chloride atoms of hexachlorocyclotriphosphazene and reduction of the aldehyde groups, and its chemical structure was characterized by elemental analysis, ¹H and ³¹P NMR, and Fourier transform infrared (FTIR) spectroscopy. A new phosphazene-based epoxy resin (PN-EP) was successfully synthesized through the reaction between diglycidyl ether of bisphenol-A (DGEBA) and PN-OH, and its chemical structure was confirmed by FTIR and gel permeation chromatography. Four PN-EP thermosets were obtained by curing with 4,4′-diaminodiphenylmethane (DDM), dicyandiamide (DICY), novolak and pyromellitic dianhydride (PMDA). The reactivity of PN-EP with the four curing agents presents an increase in the order of DDM, PMDA, novolak and DICY. An investigation on their thermal properties shows that the PN-EP thermosets achieve higher glass-transition and decomposition temperatures in comparison with the corresponding DGEBA ones while their char yields increase significantly. The PN-EP thermosets also exhibit excellent flame retardancy. The thermosets with novolak, DICY and PMDA achieve the LOI values above 30 and flammability rating of UL94 V-0, whereas the one with DDM reaches the V-1 rating. The nonflammable halogen-free epoxy resin synthesized in this study has potential applications in electric and electronic fields in consideration of the environment and human health.     

A flame-retardant epoxy resin based on a reactive phosphorus-containing monomer of DODPP and its thermal and flame-retardant properties

A flame-retardant epoxy resin (EP) was synthesized based on a novel reactive phosphorus-containing monomer, 4-[(5,5-dimethyl-2-oxide-1,3,2-dioxaphosphorinan-4-yl)oxy]-phenol (DODPP), and its structures were characterized by FTIR, ¹H NMR and ³¹P NMR spectra. The DODPP-EP₃/LWPA (low molecular weight polyamide), which contains 2.5% phosphorus, can reach UL-94 V-0 rating and a limiting oxygen index (LOI) value of 30.2%. The thermal properties and burning behaviours of cured epoxy resins were investigated by differential scanning calorimeter (DSC), thermogravimetry (TG), LOI, UL-94 tests and cone calorimetry. The morphologies of residues of cured epoxy resins were investigated by scanning electron microscopy (SEM). DSC shows that the glass-transition temperatures of cured epoxy resins decrease with increasing phosphorus content. TGA shows that the onset decomposition temperatures and the maximum-rate decomposition temperatures decrease, while char yields increase, with the increase of phosphorus content. The data from the cone calorimeter tests give the evidence that heat release rate (HRR), peak heat release rate (PHRR), average heat release rate (Av-HRR), average mass loss rate (Av-MLR) and the fire growth rate index (FIGRA) decrease significantly for DODPP-EP₃/LWPA. SEM shows that the DODPP-EP₃/LWPA forms lacunaris and compact charred layers which inhibit the transmission of heat during combustion.     

Thermal degradation mechanism of flame retarded epoxy resins with a DOPO-substitued organophosphorus oligomer by TG-FTIR and DP-MS

A novel phosphorus-containing oligomeric flame retardant, poly(DOPO substituted hydroxyphenyl methanol pentaerythritol diphosphonate) (PDPDP) was synthesized and applied to flame retarded epoxy resins. The thermal degradation behaviors of flame retarded epoxy composites with PDPDP were investigated by thermogravimetric analysis (TGA), thermogravimetric analysis/infrared spectrometry (TG-FTIR) and direct pyrolysis-mass spectrometry (DP-MS) techniques. The identification of pyrolysis fragment ions provided insight into the flame retardant mechanism. The results showed that the mass loss rate of the EP/PDPDP composites was clearly lower than pure EP when the temperature was higher than 300 °C in air or nitrogen atmosphere. The results also suggested that the main decomposition fragment ions of the EP/PDPDP composite were H₂O, CO₂, CO, benzene, and phenol. The incorporation of PDPDP can reduce the release of combustible gas and induce the formation of char layer, hence the fire potential hazard was reduced.     

Intrinsically flame retardant epoxy resin - Fire performance and background - Part I

The flame retardant effect of newly synthesized phosphorus-containing reactive amine, which can be used both as crosslinking agent in epoxy resins and as a flame retardant, was investigated. The effect of montmorillonite and sepiolite additives on the fire induced degradation was compared to pristine epoxy resin. The effect of combining the organophosphorous amine with clay minerals was also studied. It could be concluded that the synthesized phosphorus-containing amine, TEDAP can substitute the traditional epoxy resin curing agents providing additionally excellent flame retardancy: the epoxy resins flame retarded this way reach 960 °C GWFI value, 33 LOI value and V-0 UL-94 rating - compared to the 550 °C GWFI value, 21 LOI value and “no rate” UL-94 classification of the reference epoxy resin. The peak of heat release was reduced to 1/10 compared to non-flame retarded resin, furthermore a shift in time was observed, which increases the time to escape in case of fire. The flame retardant performance can be further improved by incorporating clay additives: the LOI and the HRR results showed that the optimum of flame retardant effect of clay additives is around 1 mass% filler level in AH-16-TEDAP system. Applying a complex method for mechanical and structural characterization of the intumescent char it was determined that the flame retarded system forms significantly more and stronger char of better uniformity with smaller average bubble size. Incorporation of clay additives (owing to their bubble nucleating activity) results in further decrease in average bubble diameter.     

The effect of a novel phosphorus-nitrogen reactive flame retardant curing agent on the performance of epoxy resin

A phosphorus-nitrogen reactive flame retardant curing agent poly-(isophorondiamine spirocyclic pentaerythritol bisphosphonate) (PIPSPB) was synthesized. The chemical structure of the obtained compound was identified by FTIR, ¹HNMR, and mass spectroscopies. Different proportions of DDS and PIPSPB were compounded as the curing agents to prepare a series of flame retardant epoxy resins with different phosphorus contents. The curing behavior of E-44/PIPSPB?+?DDS system was studied by DSC. A series of tests were conducted to characterize E-44/PIPSPB?+?DDS thermosetting system’s performance. The result demonstrates that the residual carbon content of EP/PIPSPB?+?DDS system is obviously higher than that of EP/DDS system after 500?°C with the increase of phosphorus content in the system, and the heat release rate of the system during combustion is significantly reduced. The generated phosphorus-containing carbon layer is obviously foamed, which shows that the flame retardancy of the system is the result of the combined action of condensed phase and gas phase. When the phosphorus content is 1.77wt%, EP-3 successfully passed UL94 V-0 flammability rating, the LOI value was as high as 29%, the impact strength and tensile strength of it were 6.08KJ/m² and 49.10MPa respectively, the adhesive strength could reach 13.89?MPa, the system presents a good overall performance.     

Synthesis of phosphorus-based flame retardant systems and their use in an epoxy resin

Methods are proposed to synthesize efficient organophosphorous compounds and combine them with montmorillonite nanoparticles. The chemical-physical structure and mechanism of action of the new systems were studied in epoxy resin. Best results were achieved using the fully phosphorylated calixresorcinarene derivative: the heat release rate peak could be decreased by 61% and the LOI value was increased from 21 to 28. The salt form of additives in case of phosphorylated phloroglucine derivatives was not advantageous in epoxy resin, because the additives could not participate in the crosslinking process effectively due to their inhomogenous distribution in the matrix. The incorporation of the nanoparticles did not create the desired flame retardant effect which can be explained by the increased heat conductivity and lower mobility of the nanoparticles due to the crosslinked structure.     

Flame retardant epoxy polymers based on all phosphorus-containing components

A phosphorus-containing epoxy resin, bis(3-t-butyl-4-glycidyloxyphenyl-2,4-di-t-butylphenyl)resorcinol diphosphate, was synthesized and subsequently cured with non-phosphorus containing amines, and/or novel phosphorus-containing aromatic or polyoxyalkylene amines. Chemical structures of these materials were characterized with FTIR, NMR, elemental analysis, and amine titration. The introduction of soft -P-O- linkage, polyoxyalkyene, or hard aromatic group into the backbones of the synthesized phosphorus-containing amines provides epoxy polymers with high phosphorus contents and tailored flexibility. Thermal analysis of differential scanning calorimeter and thermal gravimetric analysis (TGA) reveals that these resulted epoxy polymers possess moderate T_gs and thermal stability. Furthermore, high char yields in TGA analysis and high limited oxygen index values indicate that these phosphorus-containing epoxy polymers possess excellent flame retardant properties.     

Vegetable oil-based flame retardant epoxy/clay nanocomposites

Flammability of epoxy appears to be one of the greatest threats and hence limits its advanced applications. The present investigation, therefore, reports on vegetable oil-based self-extinguishing epoxy/clay nanocomposites for the first time. These nanocomposites were prepared by the ex-situ technique using mechanical shearing and ultrasonication at different loadings (1, 2.5 and 5 wt%) of nano-clay. Monoglyceride of Mesua ferrea L. seed oil, bisphenol-A and tetrabromobisphenol-A based epoxy resin was used as the matrix. XRD, TEM, SEM, FTIR and rheological studies confirmed partially exfoliated nanocomposites formation. The study demonstrates two fold improvements of tensile strength and scratch hardness, three-fold increase in adhesive strength and 20 units increase in gloss value without any change in impact resistance through nanocomposite formation. TG studied confirmed the enhancement of thermal stability of the nanocomposite by 25 °C. The limiting oxygen index values and UL 94 test indicated the self-extinguishing characteristic of the nanocomposites.     

Kinetics study of thermal decomposition of epoxy resins containing flame retardant components

Hyperbranched polyphosphate ester (HPPE) and phenolic melamine (PM) were blended in different ratios with a commercial epoxy resin to obtain a series of flame retardant resins. The thermal decomposition mechanism of their cured products in air was studied by thermogravimetric analysis and in situ Fourier-transform infrared spectroscopy. The degradation behaviours of epoxy resins containing various flame retardant components were found to be greatly changed. The incorporation of phosphorus and nitrogen compounds improved the thermal stability at elevated temperature. The kinetics of thermal decomposition was evaluated by Kissinger method, Flynn-Wall-Ozawa method and Horowitz-Metzger method. The results showed that the activation energy at lower degree of the degradation decreased by the incorporation of flame retardant components, while increased at higher degree of the degradation.     

六苯氧基环三磷腈的热解及其对环氧树脂的阻燃机理

采用极限氧指数仪和锥形量热仪测试了以六苯氧基环三磷腈(HPCP)阻燃环氧树脂的燃烧性能,结果显示,与纯环氧树脂相比,阻燃环氧树脂的极限氧指数值(LOI)明显提高、热释放速率峰值(pk-HRR)和总热释放量(THR)明显下降、环氧树脂的点燃时间提前以及分解速度加快.采用热失重(TGA)、热重红外联用(TGA-FTIR)、X射线光电子能谱(XPS)和热裂解气相色谱质谱联用(Py-GC/MS)研究了HPCP及其阻燃环氧树脂的热解路线和阻燃机理.结果表明,在阻燃环氧树脂过程中,一方面,HPCP分子中的苯氧基团首先解离并发生歧化反应,由此产生的苯氧基及其歧化产物的焠灭效应在环氧树脂中发挥气相阻燃作用,剩余的磷腈环和苯环基团会进一步裂解产生小分子碎片;另一方面,环氧树脂基体在HPCP的作用下提前分解,产生了基于双酚A结构的大分子碎片并在HPCP裂解产物作用下加速炭化,从而使更多的基体组分以残炭的形式被固定在凝聚相中,提高了阻燃环氧树脂的残炭产率,发挥了凝聚相阻燃作用.     

Intrinsically flame retardant epoxy resin - Fire performance and background - Part II

The flame retardant mechanism of a newly synthesized phosphorus-containing reactive amine, which can be used both as crosslinking agent in epoxy resins and as flame retardant, was investigated. The mode of action and degradation pathway were investigated by in situ analysis of the gases evolved during the degradation by thermogravimetric measurements coupled online with infrared (TG-EGA-FTIR) and mass spectroscopy (TG/DTA-EGA-MS) and by solid residue analysis by infrared (ATR) spectroscopic methods and X-ray photoelectron spectroscopy (XPS). It was observed that the main difference in the degradation of the reference and the flame retardant system is that the degradation of the latter begins at lower temperature mainly with the emission of degradation products of the phosphorus amine, which act as flame retardants in the gas phase slowing down the further degradation steps. At the high temperature degradation stage the solid phase effect of the phosphorus prevails: the formation of phosphorocarbonaceous intumescent char results in a mass residue of 23.4%. The ratio of phosphorus acting in gas phase and solid phase, respectively, was determined on the basis of thermogravimetric and XPS measurements.     

Silicon-containing flame retardant epoxy resins: Synthesis, characterization and properties

Epoxy resins with different silicon contents were prepared from silicon-containing epoxides or silicon-containing prepolymers by curing with 4,4′-diaminodiphenylmethane. The reactivity of the silicon-based compounds toward amine curing agents was higher than that of the conventional epoxy resins. The T_g of the resulting thermosets was moderate and decreased when the silicon content increased. The onset decomposition temperatures decreased and the char yields increased when the silicon content increased. Epoxy resins had a high LOI value, according to the efficiency of silicon in improving flame retardance.     

Thermal degradation and flame retardancy of epoxy resins containing intumescent flame retardant

Pentaerythritol diphosphonate melamine-urea-formaldehyde resin salt, a novel cheap macromolecular intumescent flame retardants (IFR), was synthesized, and its structure was a caged bicyclic macromolecule containing phosphorus characterized by IR. Epoxy resins (EP) were modified with IFR to get the flame retardant EP, whose flammability and burning behavior were characterized by UL 94 and limiting oxygen index (LOI). 25 mass% of IFR were doped into EP to get 27.2 of LOI and UL 94 V-0. The thermal properties of epoxy resins containing IFR were investigated with thermogravimetry (TG) and differential thermogravimetry (DTG). Activation energy for the decomposition of samples was obtained using Kissinger equation. The resultant data show that for EP containing IFR, compared with EP, IFR decreased mass loss, thermal stability and R _max, increased the char yield. The activation energy for the decomposition of EP is 230.4 kJ mol⁻¹ while it becomes 193.8 kJ mol⁻¹ for EP containing IFR, decreased by 36.6 kJ mol⁻¹, which shows that IFR can catalyze decomposition and carbonization of EP.     

Thermal degradation characteristics of a novel flame retardant coating using TG-IR technique

A novel phosphate acrylate monomer (TGMAP) has been synthesized by allowing phosphoric acid to react with glycidyl methacrylate. Its structure was characterized by Fourier transformed infrared spectroscopy (FTIR) and ¹H nuclear magnetic resonance spectroscopy (¹H NMR). The thermal degradation mechanism was characterized using thermogravimetric analysis/infrared spectrometry (TG-IR). The char yield was 36.3% at 600 °C. TG data indicate that the material undergoes degradation in three characteristic temperature stages, which can be attributed to the decomposition of the phosphate, thermal pyrolysis of aliphatic chains, and degradation of an unstable structure in char, respectively. The volatilized products formed on thermal degradation of TGMAP indicated that the volatilized products are CO, CO₂, carboxylic acid, acid anhydride, water, alkane, and aromatic compounds according to the temperature of onset formation.     

A vanillin-derived flame retardant based on 2-aminopyrimidine for enhanced flame retardancy and mechanical properties of epoxy resin

In order to give epoxy resin good flame retardance, a novel bio-based flame retardant based on 2-aminopyrimidine (referred to as VAD) was synthesized from renewable vanillin as one of the starting materials. Its structure was confirmed by NMR and mass spectra. The epoxy resins containing VAD were prepared by utilizing 4,4-diaminodiphenylmethane (DDM) as a co-curing agent, and their flame-retardant, mechanical and thermal properties and corresponding mechanisms were studied. VAD accelerated the cross-linking reaction of DDM and E51 (diglycidyl ether of bisphenol A). 12.5 wt% VAD made the epoxy resin achieve UL-94 V-0 rating and its limited oxygen index (LOI) value increase from 22.4% to 32.3%. The cone calorimetric testing results revealed the decline in the values of total heat release (THR) and peak of heat release rate (pk-HRR) and the obvious enhancement of residue yield. A certain amount of VAD enhanced the flame inhibition, charring and barrier effects, resulting in good flame retardance of the epoxy resin. Furthermore, the tensile strength, flexural strength and flexural modulus of the epoxy resin with 12.5 wt% loading of VAD were 6.5%, 14.9%, 15.2% higher than those of EP, indicating the strengthening effect of VAD. This work guarantees VAD to be a promising flame retardant for enhancing the fire retardancy of epoxy resin without compromising its mechanical properties.     

Preparation of phosphorus‐containing phenolic resin and its application in epoxy resin as a curing agent and flame retardant

For the sake of improving the flame retardancy of epoxy resin (EP), a novel phosphorus‐containing phenolic resin (PPR) synthesized in our group instead of conventional phenolic resin (PR) was used to cure EP in the present research. The curing processes and the corresponding crosslinking structure and mechanical performance were investigated by differential scanning calorimeter and dynamic mechanical thermal analysis. Because of the introduction of flame‐retarding elements including P and Si, PPR exhibited higher charring capacity in the condensed phase, which is helpful to construct a char layer of higher quality. Correspondingly, PPR‐cured EP displayed remarkably improved flame retardance as compared to conventional PR‐cured EP through the related evaluations including limiting oxygen index, vertical burning test, and microscale combustion colorimeter. As a multifunction agent, it is believable that PPR possesses potential commercial value to prepare flame‐retardant EP with high performance.     

Synthesis of novel epoxy-group modified phosphazene-containing nanotube and its reinforcing effect in epoxy resin

In this work, novel epoxy-group modified phosphazene-containing nanotubes (EPPZTs) were successfully synthesized through the reaction between epichlorohydrin and phosphazene-containing nanotubes with active hydroxyl groups. The structure was characterized by Fourier transform infrared spectroscopy (FTIR) and the morphology was investigated by scanning electron microscopy (SEM). EPPZTs/epoxy resin composites were prepared by introducing EPPZTs into epoxy resin matrix (EP618). Impact strength and tensile strength of the composites with different content of EPPZTs were tested and SEM was used to study the dispersion of EPPZTs in polymer matrix. The best effect in reinforcing the matrix was observed when the content of EPPZTs was 0.1%. The thermal stability of the composites was studied by thermo gravimetric analysis (TGA) and it was found that the addition of EPPZTs effectively increased the residue and decreased the weight loss rate.     

Studies on the effect of different levels of toughener and flame retardants on thermal stability of epoxy resin

A thermoplastic toughener, polyether sulphone (PES) and a number of different types of flame retardants were blended in different ratios with a commercial epoxy resin triglycidyl-p-aminophenol (TGAP) and 4,4-diamino diphenyl sulphone (DDS) a curing agent. The effect of type and levels of flame retardants (FR) and the toughening agent on the curing, thermal decomposition and char oxidation behaviour of the epoxy resin was studied by the simultaneous differential thermal analysis and thermogravimetric techniques. It was observed that the toughener slightly increases the curing temperature (by up to 20 °C) but had minimal effect on the decomposition temperature of the resin. Flame retardants, however affected all stages depending upon the type of flame retardant used. The curing peak for samples containing tougher and flame retardants although slightly changed depending upon the type of FR, was not more than ± 20 °C compared to that of samples containing toughener only. All flame retardants lowered the decomposition temperature of the epoxy resin. Phosphorus- and nitrogen-containing flame retardants reduced the char oxidation leading to more residual char, whereas halogen- containing flame retardants had less effect on this stage.