Molecular Gold Wire from Mixed‐Valent AuI/III Complexes

Crystals of mixed‐valent Au complexes have been grown from solutions of cyclohexanecarbonitrile and a stoichiometric amount of gold(I) and gold(III) chloride. The purely obtained compound was characterized as bis(cyclohexanecarbonitrile)gold(I) tetrachloridoaurate(III). The crystal packing of the mixed valent Au(I/III) compound demonstrates a columnar arrangement of the gold(I) and gold(III) atoms. The new structure displays the shortest unsupported gold(I)–gold(III) interactions with the sub‐van der Waals distance of 324–325 pm, which is assumed as an aurophilic bonding interaction.     

Gold(I)-coordination triggered multistep and multiple photochromic reactions in multi-dithienylethene (DTE) systems

The preparation, characterization, and photochromic properties of a mononuclear gold(I) complex (1oo) with two identical DTE-acetylides and a dinuclear gold(I) complex (2ooo) with both DTE-acetylide and DTE-diphosphine are described. Both gold(I) complexes exhibit multistep and multiple photocyclization/cycloreversion reactions. Particularly, four-state and four-color photochromic switch is successfully achieved for the dinuclear gold(I) complex upon irradiation with appropriate wavelengths of light. In contrast, fully ring-closed form is unattained through multiple photocyclization for the two corresponding model organic compounds coupling with the same DTE units as gold(I) complexes but without gold(I)-participation. It is demonstrated that coordination of gold(I) ion to DTE-acetylides exerts indeed a crucial role in achieving stepwise and selective photocyclization and cycloreversion reactions for both gold(I) complexes, in which the coordinated gold(I) atom acts as an effective "barrier" to prohibit intramolecular energy transfer between multi-DTE moieties.     

Reactions and structural characterization of gold(III) complexes with amino acids, peptides and proteins

The present review article highlights recent findings in the field of gold(III) complexes with amino acids, peptides and proteins. The first section of this article provides an overview of the gold(III) reactions with amino acids, such as glycine, alanine, histidine, cysteine and methionine. The second part of the review is mainly focused on the results achieved in the mechanistic studies of the reactions between gold(III) and different peptides and structural characterization of gold(III)-peptide complexes as the final products in these reactions. The last section of this article deals with the reactions of gold(III) complexes with proteins as primary targets for cytotoxic gold compounds. Systematic summaries of these results contribute to the future development of gold(III) complexes as potential antitumor agents and also have importance in relation to the severe toxicity of gold-based drugs.     

DFT and in situ EXAFS investigation of gold/ceria-zirconia low-temperature water gas shift catalysts: identification of the nature of the active form of gold

A combined experimental and theoretical investigation of the nature of the active form of gold in oxide-supported gold catalysts for the water gas shift reaction has been performed. In situ extended X-ray absorption fine structure (EXAFS) and X-ray absorption near-edge structure (XANES) experiments have shown that in the fresh catalysts the gold is in the form of highly dispersed gold ions. However, under water gas shift reaction conditions, even at temperatures as low as 100 degrees C, the evidence from EXAFS and XANES is only consistent with rapid, and essentially complete, reduction of the gold to form metallic clusters containing about 50 atoms. The presence of Au-Ce distances in the EXAFS spectra, and the fact that about 15% of the gold atoms can be reoxidized after exposure to air at 150 degrees C, is indicative of a close interaction between a fraction (ca. 15%) of the gold atoms and the oxide support. Density functional theory (DFT) calculations are entirely consistent with this model and suggest that an important aspect of the active and stable form of gold under water gas shift reaction conditions is the location of a partially oxidized gold (Audelta+) species at a cerium cation vacancy in the surface of the oxide support. It is found that even with a low loading gold catalysts (0.2%) the fraction of ionic gold under water gas shift conditions is below the limit of detection by XANES (<5%). It is concluded that under water gas shift reaction conditions the active form of gold comprises small metallic gold clusters in intimate contact with the oxide support.     

The Quest for Mononuclear Gold(II) and Its Potential Role in Photocatalysis and Drug Action

The chemistry of gold strongly focuses on the ubiquitous oxidation states +I and +III. The intermediate oxidation state +II is generally avoided in mononuclear gold species. In recent years, gold(II) has been increasingly suggested as a key intermediate in artificial photosynthesis systems, with gold(III) moieties acting as electron acceptors, as well as in gold‐catalyzed photoredox catalysis and radical chemistry. This Minireview provides a concise summary of confirmed and characterized mononuclear open‐shell gold(II) complexes. Recent findings on structural motifs and reactivity patterns will be discussed. Exciting developments in the fields of photosynthesis, photocatalysis, and potential roles in medicinal chemistry will be outlined.     

Micrometer-sized gold nanoplates: starch-mediated photochemical reduction synthesis and possibility of application to tip-enhanced Raman scattering (TERS)

In this report, we propose a novel starch-mediated photochemical reduction method for synthesizing micrometer-sized gold nanoplates and the possibility of using them as a tip-enhanced Raman scattering (TERS) substrate. To reduce gold ions, a starch chain firstly forms a complex with AuCl(4)(-), and the gold ion is subsequently reduced by receiving an electron from a chloride ion and generating a chloride radical when the [AuCl(4)(-)-starch] complex is irradiated by sunlight. Due to the slow reaction rate and the capability of starch as a template, gold structure can thermodynamically grow along the (111) facet which is the lowest energy facet of the gold face-centered cubic (fcc) crystal. This method can provide various shapes of gold plates such as triangle, truncated triangle, hexagon, polygon, etc. The plate size can be controlled in the range from a few micrometers to more than one hundred micrometers by increasing the acidity of solution while the plate thickness is less than 100 nm. Potential application of the gold plates as TERS substrates is demonstrated by collecting Raman signals while approaching a silver-coated tungsten tip to the surface of the micrometer-sized gold nanoplate covered by crystal violet (CV) molecules. The results show that less than one hundred CV molecules can be detected in our study.     

A study on the sizes and concentrations of gold nanoparticles by spectra of absorption, resonance Rayleigh scattering and resonance non-linear scattering

Liquid phase gold nanoparticles with different diameters and colors can be prepared using sodium citrate reduction method by controlling the amounts of sodium citrate. The mean diameters of gold nanoparticles are measured by transmission electron microscope (TEM). Gold nanoparticles with different sizes have specific absorption spectra. When the diameters of nanoparticles is between 12 and 41 nm, the maximum absorption peaks locate at 520-530 nm and there are red shifts gradually with the increase of diameters of gold nanoparticles. And when the size of gold nanoparticle is constant, the absorbance is proportional to the concentration of gold. Obvious resonance Rayleigh scattering (RRS) and the resonance non-linear scattering such as second-order scattering (SOS) and frequency-doubling scattering (FDS) appear at the same time as well, and the maximum scattering peaks are located at 286 nm (RRS), 480 nm (SOS) and 310 nm (FDS), respectively. When the concentration of gold is constant, absorbance and the intensities of RRS, SOS and FDS (I(RRS), I(SOS) and I(FDS)) have linear relationships with the diameters of gold nanoparticles. When the diameter of gold nanoparticle is constant, the absorbance and I(RRS), I(SOS), I(FDS) are directly proportional to the concentrations of gold nanoparticles. Therefore, it is very useful for studying the liquid phase gold nanoparticles by investigating the absorption, RRS, SOS and FDS spectra.     

Au/Al2O3催化剂的制备及其在CH4/CO2重整反应中的催化活性

采用浸渍法和沉积－沉淀法制备了四种不同的Au/Al2O3催化剂，测定了它们在氢气还原前后及催化反应后的金含量及比表面积，结果表明，制备方法明显影响催化剂的金含量，应用X－光粉末衍射技术研究了这些催化剂经还原处理及反应后的物相变化，金以Au^0物相存在，没有发现氧化态的金物相，考察了该催化剂在CH4／CO2重整反应中的催化活性，发现金催化剂的活性取决于金粒子的大小，浸渍法制备的金催化剂具有较大的金晶粒尺寸，催化活性低，沉积－沉淀法制备的金催化剂金晶粒尺寸较小，催化活性较高，以尿素为沉淀剂制备的催化剂给出1073K时的CH4和CO2转化率分别为8．1％和17．6％，高温反应不仅导致金晶粒的聚集，而且存在明显的金流失现象。     

Kinetic and mechanistic investigations of the light induced formation of gold nanoparticles on the surface of TiO2

The kinetics of the formation of gold nanoparticles on the surface of pre-illuminated TiO(2) have been investigated using stopped-flow technique and steady state UV/Vis spectroscopy. Excess electrons were loaded on the employed nanosized titanium dioxide particles by UV-A photolysis in the presence of methanol serving as hole scavenger, stored on them in the absence of oxygen and subsequently used for the reduction of Au(III) ions. The formation of gold nanoparticles with an average diameter of 5 nm was confirmed after mixing of the TiO(2) nanoparticles loaded with electrons with aqueous solution of tetrachloroaureate (HAuCl(4)) by their surface plasmon absorbance band at 530 nm, as well as by XRD and HRTEM measurements. The rate of formation of the gold nanoparticles was found to be a function of the concentration of the gold ions and the concentration of the stored electrons, respectively. The effect of PVA as a stabilizer of the gold nanoclusters was also studied. The observed kinetic behavior suggests that the formation of the gold nanoparticles on the TiO(2) surface is an autocatalytic process comprising of two main steps: 1) Reduction of the gold ions by the stored electrons on TiO(2) forming gold atoms that turn into gold nuclei. 2) Growth of the metal nuclei on the surface of TiO(2) forming the gold particles. Interestingly, at higher TiO(2) electron loading the excess electrons are subsequently transferred to the deposited gold metal particles resulting in "bleaching" of their surface plasmon band. This bleaching in the surface plasmon band is explained by the Fermi level equilibration of the Au/TiO(2) nanocomposites. Finally, the reduction of water resulting in the evolution of molecular hydrogen initiated by the excess electrons that have been transferred to the previously formed gold particles has also been observed. The mechanism of the underlying multistep electron-transfer process has been discussed in detail.     

油基-金纳米流体的制备及热稳定性

分别采用N-十六烷基-N-(羟乙基)-N,N-二甲基溴化铵(CHDAB)和丁烷-1,4-二(N-十六烷基-N,N-二甲基溴化铵)(G16-4-16)2种阳离子表面活性剂作为金属表面修饰剂, 在石油醚/正丁醇/水混合体系中用KBH₄ 还原HAuCl₄制备出亲油性纳米金. 其中, 双子表面活性剂G16-4-16显示出更好的包裹分散作用, 其包裹的纳米金粒径分布范围较窄, 平均粒径为5.2 nm. 将该纳米金颗粒分散在液态烷烃、 甲苯和长链烷基醇等溶剂中可制成稳定的油基纳米流体. 采用紫外-可见光谱法跟踪热稳定性随时间的变化, 结果表明, 该纳米流体显示了较好的热稳定性, 在130 ℃稳定时间达20 h. 采用点热源法测定了该纳米流体的导热系数, 结果表明, 50 ℃时添加质量分数1.5%的纳米金可以使其导热系数增大约17%.     

X-ray-induced production of gold nanoparticles on a SiO(2)/Si system and in a poly(methyl methacrylate) matrix

Prolonged exposure to X-rays of HAuCl(4) deposited from an aqueous solution onto a SiO(2)/Si substrate or into a poly(methyl methacrylate) (PMMA) matrix induces reduction of the Au(3+) ions to Au(0) and subsequent nucleation to gold nanoclusters as recorded by X-ray photoelectron spectroscopy. The corresponding major oxidation product is determined as chlorine {HAuCl(4)(ads) + X-rays --> Au(ads) + (3/2)Cl(2)(ads) + HCl(ads)}, which is initially adsorbed onto the surface but eventually diffuses out of the system into the vacuum. The reduced gold atoms aggregate (three-dimensionally) into gold nanoclusters as evidenced by the variation in the binding energy during X-ray exposure, which starts as 1.3 eV but approaches a value that is 0.5 eV higher than that of the bulk gold. The disappearance of the oxidation product (Cl2p signal) and the growth of the nanoclusters (related to the measured binding energy difference between the Si2p of the oxide and Au4f of the reduced gold) exhibit first-order kinetics which is approximately 3 times slower than the reduction of Au(3+), indicating that both of the former processes are diffusion controlled. Similarly, gold ions incorporated into PMMA can also be reduced and aggregated to gold nanoclusters using 254 nm deep UV irradiation in air evidenced by UV-vis-NIR absorption spectrocopy.     

Gold nanoparticles with different capping systems: an electronic and structural XAS analysis

Gold nanoparticles (NPs) have been prepared with three different capping systems: a tetralkylammonium salt, an alkanethiol, and a thiol-derivatized neoglycoconjugate. Also gold NPs supported on a porous TiO(2) substrate have been investigated. X-ray absorption spectroscopy (XAS) has been used to determine the electronic behavior of the different capped/supported systems regarding the electron/hole density of d states. Surface and size effects, as well as the role of the microstructure, have been also studied through an exhaustive analysis of the EXAFS (extended X-ray absorption fine structure) data. Very small gold NPs functionalized with thiol-derivatized molecules show an increase in d-hole density at the gold site due to Au-S charge transfer. This effect is overcoming size effects (which lead to a slightly increase of the d-electron density) for high S:Au atomic ratios and core-shell microstructures where an atomically abrupt Au-S interface likely does not exist. It has been also shown that thiol functionalization of very small gold NPs is introducing a strong distortion as compared to fcc order. To the contrary, electron transfer from reduced support oxides to gold NPs can produce a higher increase in d-electron density at the gold site, as compared to naked gold clusters.     

Surface plasmon resonance spectroscopy study of electrostatically adsorbed layers

The use of 4-(dimethylamino)pyridine to form an adhesion layer for the adsorption of anionic polyelectrolytes on gold surfaces is investigated. In situ surface plasmon resonance spectroscopy is used to monitor the changes in thickness of the adsorbed layers as a function of pH changes. Weak (poly(acrylate)) and strong (poly(styrenesulfonate)) polyelectrolytes have been studied. Although 4-(dimethylamino)pyridine is weakly bound to gold, it is not displaced by these polyelectrolytes and acts as an adhesion layer. The relationship of the interaction of anionic polyelectrolytes with 4-(dimethylamino)pyridine-modified planar gold and gold nanoparticles is discussed.     

Chiral Gold(III) Complexes: Synthesis,Structure, and Potential Applications

Since the beginning of the 2000’s, homogeneous gold catalysis has emerged as a powerful tool to promote the cyclization of unsaturated substrates with excellent regioselectivity allowing the synthesis of elaborated organic scaffolds. An important goal to achieve in gold catalysis is the possibility to induce enantioselective transformations by the assistance of chiral complexes. Unfortunately, the linear geometry of coordination for gold usually encountered in complexes at the +1 oxidation states renders this goal very challenging. In consequence, the interest toward the synthesis of chiral gold(III) complexes is steadily growing. Indeed, the square planar geometry of the gold(III) cation appears more suitable to promote chiral induction. Beside catalysis, gold(III) complexes have also shown promising potential in the field of pharmacology. Herein, syntheses and applications of well-defined gold(III) complexes reported over the last fifteen years are summarized.     

Electroanalytical sensing of chromium(III) and (VI) utilising gold screen printed macro electrodes

We report the fabrication of gold screen printed macro electrodes which are electrochemically characterised and contrasted to polycrystalline gold macroelectrodes with their potential analytical application towards the sensing of chromium(III) and (VI) critically explored. It is found that while these gold screen printed macro electrodes have electrode kinetics typically one order of magnitude lower than polycrystalline gold macroelectrodes as is measured via a standard redox probe, in terms of analytical sensing, these gold screen printed macro electrodes mimic polycrystalline gold in terms of their analytical performance towards the sensing of chromium(III) and (VI), whilst boasting additional advantages over the macro electrode due to their disposable one-shot nature and the ease of mass production. An additional advantage of these gold screen printed macro electrodes compared to polycrystalline gold is the alleviation of the requirement to potential cycle the latter to form the required gold oxide which aids in the simplification of the analytical protocol. We demonstrate that gold screen printed macro electrodes allow the low micro-molar sensing of chromium(VI) in aqueous solutions over the range 10 to 1600 μM with a limit of detection (3σ) of 4.4 μM. The feasibility of the analytical protocol is also tested through chromium(VI) detection in environmental samples.     

Gold nanoparticles prepared using polyethylenimine adsorbed onto montmorillonite

Polyethylenimine-modified montmorillonite (N-MMT) was used to prepare gold nanoparticles, where the montmorillonite (MMT) acted as a solid support to retain the conformation of polyethylenimine (PEI), and the amino groups of PEI were used simultaneously to both complex and reduce the gold ions. From the results of X-ray diffraction, it is apparent that the reduction of gold ions occurs primarily on the MMT surface. In the presence of MMT, the formation of a flattened configuration on the clay instead of stretched-out ethylenimine segments of PEI results in the formation of smaller gold particles. With a higher acidification ratio, the recharging of the MMT surface with positive ammonium ionic sites of PEI is likely to prevent the flocculation of clay and thus facilitate the reduction of gold. The rate of gold reduction with N-MMT is faster at low pH values, this being in contrast to the usual trend observed for the reduction of gold ions. The use of PEI adsorbed onto MMT has been shown to be able to act simultaneously as both a protective template and as a reducing agent, thereby greatly simplifying the process for preparing gold nanoparticles.     

A luminescent supermolecule with gold(I) quinoline-8-thiolate: crystal structure,spectroscopic and photophysical properties

The trinuclear complex [(8-QNS)(2)Au(AuPPh(3))(2)].BF(4) (8-QNS = quinoline-8-thiolate), with intramolecular gold(I)...gold(I) distances of 3.0952(4) and 3.0526(3) A, is aggregated to form a novel hexanuclear supermolecule, ([(8-QNS)2(Au(AuPPh3)2])2.(BF4)2, via a close intermolecular gold(I)...gold(I) contact of 3.1135(3) A. The beautiful hexanuclear supermolecule has an inversion center, and the six metal centers can be viewed as roughly coplanar. Six gold(I) ions are embedded in an ellipse and surrounded by 4 quinoline and 12 phenyl rings. The title compound shows interesting spectroscopic and luminescence properties dependent on the solvent polarity; i.e., it emits at ca. 440 and 636 nm in CH(2)Cl(2) and only at ca. 450 nm in CH(3)CN. The long-lived emission at ca. 636 nm (16.2 micros) in CH(2)Cl(2) is quenched by polar solvents such as CH(3)CN and CH(3)OH with quenching constants as 1.00 x 10(5) and 3.03 x 10(4) s(-1) M(-1), respectively, which is suggested to be related to the presence or absence of gold(I)...gold(I) interactions due to scrambling of the [AuPPh(3)]+ units, isolobal to H+.     

氮杂环卡宾双核金络合物催化的胺芳基化反应

联萘胺出发合成了氮杂环卡宾双核和单核金络合物, 通过X射线的单晶衍射确定了它们的结构, 并将其应用于催化胺芳基化反应中, 以高达95%的收率得到吡咯烷类化合物. 综合上述实验结果, 发现氮杂环卡宾双核金络合物4b中存在着Au(I)-Au(I)间相互弱作用力, 而且这种弱相互作用可能对该催化反应起重要的作用, 以高收率得到吡咯烷类化合物.     

Modification of the size of supported clusters by coadsorption of an organic compound: gold and L-cysteine on rutile TiO2(110)

Using X-ray photoelectron spectroscopy we studied the coadsorption of the amino acid L-cysteine and gold on a rutile TiO(2)(110) surface under ultrahigh vacuum conditions. Irrespective of the deposition order, i.e., irrespective of whether L-cysteine or gold is deposited first, the primary interaction between L-cysteine and the gold clusters formed at the surface takes place through the deprotonated thiol group of the molecule. The deposition order, however, has a profound influence on the size of the gold clusters as well as their location on the surface. If L-cysteine is deposited first the clusters are smaller by a factor two to three compared to gold deposited onto the pristine TiO(2)(110) surface and then covered by L-cysteine. Further, in the former case the clusters cover the molecules and thus form the outermost layer of the sample. We also find that above a minimum gold cluster size the gold cluster/L-cysteine bond is stronger than the L-cysteine/surface bridging oxygen vacancy bond, which, in turn, is stronger than the gold cluster/vacancy bond.     

Solution-based direct readout surface enhanced Raman spectroscopic (SERS) detection of ultra-low levels of thiram with dogbone shaped gold nanoparticles

We report the use of two different sizes of dogbone shaped gold nanoparticles as colloidal substrates for surface enhanced Raman spectroscopy (SERS) based detection of ultra-low levels of thiram, a dithiocarbamate fungicide. We demonstrate the ability to use a solution based, direct readout SERS method as a quantitative tool for the detection of ultra-low levels of thiram. The two different sizes of dogbone shaped gold nanoparticles are synthesized by using the seed-mediated growth method and characterized by using UV-visible spectroscopy and transmission electron microscopy (TEM). The smaller dogbone shaped nanoparticles have an average size of 43 ± 13 nm. The larger dogbone shaped gold nanoparticles have an average size of 65 ± 15 nm. The nanoparticle concentration is 1.25 × 10(11) nanoparticles per mL for the smaller dogbone shaped gold nanoparticles and is 1.13 × 10(11) nanoparticles per mL for the larger dogbone shaped gold nanoparticles. Different concentrations of thiram are allowed to bind to the two different sizes of dogbone shaped gold nanoparticles and the SERS spectra are obtained. From the calibration curve, the limit of detection for thiram is 43.9 ± 6.2 nM when the smaller dogbone shaped gold nanoparticles are used as colloidal SERS substrates In the case of the larger dogbone shaped gold nanoparticles, the limit of detection for thiram is 11.8 ± 3.2 nM. The lower limit of detection obtained by using the larger dogbone shaped gold nanoparticles as colloidal substrates is due to the lightning rod effect, higher contributions from the electromagnetic enhancement effect, and larger number of surface sites for thiram to bind.