Rapid Determination of HAAs Formation Potential of the Reaction of Humic Acid with Chlorine or Chlorine Dioxide

On the basis of gas chromatography(GC) coupled with a short capillary column and an electron capture detector(ECD), a simple and rapid method for the determination of five haloacetic acids(HAAs) in drinking water was developed by the optimization of derivation conditions and the modification of gas chromatographic program. HAAs formation potential(HAAFP) of the reaction of humic acid with chlorine was determined via this method. The major advantages of the method are the simplicity of chromatographic temperature program and the short run time of GC. Dichloroacetic acid(DCAA) and Trichloroacetic acid(TCAA), which were detected in the determination of HAAFP, were rapidly formed in the first 72 h of the reaction of humic acid with chlorine. HAAFP of the reaction of humic acid with chlorine increased with the increase in the concentrations of humic acid and chlorine. The average HAAFP of the reaction of humic acid with chlorine was 39.9 μg/mg TOC under the experimental conditions. When the concentration of humic acid was 4 mg/L, the concentration of HAAs, which were produced in the reaction of humic acid with chorine, may exceed MCL of 60 μg/L HAAs as the water quality standards for urban water supply of China and the first stage of US EPA disinfection/disinfection by-products(D/DBP) rule; when the concentration of humic acid was 2 mg/L, the concentration of HAAs may exceed MCL of 30 μg/L HAAs for the second stage of US EPA D/DBP rule. When humic acid was reacted with chlorine dioxide, only DCAA was detected with a maximum concentration of 3.3 μg/L at a humic acid content of 6 mg/L. It was demonstrated that the substitution of chlorine dioxide for chorine may entirely or partly control the formation of HAAs and effectively reduce the health risk associated with disinfected drinking water.     

Synthesis and characterization of hydroxypropyl cellulose from bacterial cellulose

Bacterial cellulose produced by Acetobacter xylinum has been reacted with propyleneoxide to synthesize hydroxypropyl cellulose(HPC) under different reaction conditions while diluted by toluene. The effects of mass ratio of bacterial cellulose to propyleneoxide, dilutability of toluene, reaction temperature(T) and time(t) were investigated by series of experiments. The degree of substitution(DS), hydroxypropyl content(A) and yield(η) were compared. The optimized product exhibited cold-water solubility and hot-water gelatinization in aqueous medium. Further study was carried out with FTIR, TGA, XRD, SEM and 13C-NMR for characterization. The water/air contact angle measurement reveals that it is a good hydrophobic material with good mechanical properties.     

Synthesis,isolation and characterization of methyl levulinate from cellulose catalyzed by extremely low concentration acid

A direct synthesis of methyl levulinate from cellulose alcoholysis in methanol medium under mild condition(180 210 C)catalyzed by extremely low concentration sulfuric acid(0.01 mol/L)and the product isolation were developed in this study.Effects of different process variables towards the catalytic performance were performed as a function of reaction time.The results indicated that sulfuric acid concentration,temperature and initial cellulose concentration had significant effects on the synthesis of methyl levulinate.An optimized yield of around 50%was achieved at 210 C for 120 min with sulfuric acid concentration of 0.01 mol/L and initial cellulose concentration below 100 g/L.The resulting product mixture was isolated by a distillation technique that combines an atmospheric distillation with a vacuum distillation where n-dodecane was added to help distill the heavy fraction.The light fraction including mainly methanol could be reused as the reaction medium without any substantial change in the yield of methyl levulinate.The chemical composition and structural of lower heavy fraction were characterized by GC/MS,FTIR,1H-NMR and13C-NMR techniques.Methyl levulinate was found to be a major ingredient of lower heavy fraction with the content over 96%.This pathway is efficient,environmentally benign and economical for the production of pure levulinate esters from cellulose.     

Synthesis of azo derivatives of 4-aminosalicylic acid

For searching a better 4-aminosalicylic acid derivative with higher activity and less side effects against the inflammatory bowel disease, 4-aminosalicylic acid (4-ASA) was protected by benzyloxycarbonyl and acetyl, respectively. The resultant was hydrogenized to remove protective group of amino group, then the product was reacted with NaNO2 to give diazonium salt, which was conjugated with salicylic acid, hydroxybenzene, TV-salicyloyl glycine acid to get azo derivatives of 4-ASA. The azo derivatives were hydrolyzed under the alkaline condition to get the target products. All compounds were characterized by FT-IR, 1H NMR, 13C NMR spectra in details. New derivatives of 4-ASA were characterized. The synthetic route was reasonable and feasible.     

Synthesis of ethylidene diacetate from dimethyl ether, CO and H2

Ethylidene diacetate was prepared by reacting dimethyl ether, acetic acid and syngas in the presence of a catalytic system comprising RhI3, PPh3 and CH3I. The effects of reaction temperature, pressure, time and the CO/H2 molar ratio on the conversion of dimethyl ether and the product selectivity were investigated under the same catalyst formulation. Results showed that a maximum conversion of dimethyl ether was obtained when a mixture consisting of 0.3 mol dimethyl ether and 120 ml acetic acid was reacted at 180 ℃ and 3.0 MPa for 10 h at a stirring speed of 600 rpm under a syngas flow with a CO/H2 molar ratio of 2.5, which was catalyzed by a catalyst mixture comprising 0.3 g RhI3, 6 g PPh3 and 1.3 g CH3I. The selectivity of ethylidene diacetate increased with temperature, decreased with the CO/H2 molar ratio and exhibited a maximum with pressure.     

Synthesis of ethylidene diacetate from dimethyl ether,CO and H_2

Ethylidene diacetate was prepared by reacting dimethyl ether,acetic acid and syngas in the presence of a catalytic system comprising RhI3,PPh3 and CH3I.The effects of reaction temperature,pressure,time and the CO/H2 molar ratio on the conversion of dimethyl ether and the product selectivity were investigated under the same catalyst formulation.Results showed that a maximum conversion of dimethyl ether was obtained when a mixture consisting of 0.3 mol dimethyl ether and 120 ml acetic acid was reacted at 180 ℃ and 3.0 MPa for 10 h at a stirring speed of 600 rpm under a syngas flow with a CO/H2 molar ratio of 2.5,which was catalyzed by a catalyst mixture comprising 0.3 g RhI3,6 g PPh3 and 1.3 g CH3I.The selectivity of ethylidene diacetate increased with temperature,decreased with the CO/H2 molar ratio and exhibited a maximum with pressure.     

A NOVEL COPOLYMER-BOUND CIS-DICARBONYLRHODIUM COMPLEX FOR THE CARBONYLATION OF METHANOL TO ACETIC ACID AND ACETIC ANHYDRIDE

A series of porous microspheres of linear and ethylene diacrylate (M') cross-linked copolymers of 2-vinylpyridine (V) and methyl acrylate (M) reacted with tetracarbonyldichlorodirhodium to form a series of cis-dicarbonylrhodium chelate complex (MVRh and MVM 'Rh). They are thermally stable yet very reactive in the carbonylation of methanol to acetic acid, and of methanol-acetic acid mixture to acetic acid and acetic anhydride with a selectivity of 100% under relatively mild and anhydrous conditions.     

Reductive Cleavage of the Te—Te Bond in Diphenyl Ditelluride by the Sm—CrCl3（cat.）System： Preparation of Telluroesters and Unsymmetrical Phenyltellurides

The reduction of diphenyl ditelluride by the Sm/CrCl3(cat.) system led to a telluride anion.This species reacted with acid chlorides,alkyl halides,and α，β-unsaturated enoates or α，β-unsaturated ene nitriles to afford telluroesters and unsymmetrical phenyltellurides,respectively,in moderate to good yields under mild and neutral conditions.     

NEW FLUOROSILOXANE AS A COATING MATERIAL FOR NERVE AGENT SENSORS

Polymer coated quartz crystal microbalance （QCM） sensor based on the frequency shifts due to the adsorption of compounds at the surface of modified quartz crystal electrode is an effective method for detection of sarin （GB） which is a highly toxic nerve warfare agent. A new fluorosiloxane polymer has been synthesized through 6 steps from trifluoromethyl benzene. The synthesis was achieved from trifluoromethyl benzene through nitration, hydrogenation. The obtained m-nitrotrifluoromethyl aniline was treated with NANO2, and then hydrolyzed to m-nitrotrifluoromethyl phenol, m-nitrotrifluoromethyl phenol was reacted with allyl bromide to the ether product. The product was rearranged by Claisen rearrangement, and then reacted with polymethylhydrosiloxane under catalyst of Pt/DVTMS. The fluorosiloxane polymer can be obtained. The polymer has been successfully used as QCM coating material     

Copper methanesulfonate-acetic acid as a novel catalytic system for tetrahydropyranylation of alcohols and phenols

A synergistic catalytic effect between copper methanesulfonate and acetic acid in tetrahydropyranylation of alcohols and phenol at room temperature under solvent free condition has been described. Both alcohols (primary, secondary and tertiary) and phenols reacted with 3,4-dihydro-2H-pyran smoothly to afford the corresponding tetrahydropyranyl ethers in good yields.     

Synthesis and Characterization of a Novel Podophyllotoxin Derivative Containing a Cyclohexadienone Group

4β-Azido-4-demethyl-4'-O-demethyl-epipodophyllotoxin reacted with phenyliodonium diacetate in MeOH at room temperature to synthesize a novel podophyllotoxin derivative containing a cyclohexadienone group with the original configurations of C2 and C4,which are required for the antitumor activities.The component and structure of the pro-duct were confirmed using elemental analysis,high-resolution mass spectrum,1H and 13C NMR spectra,and infrared spectrum.Furthermore,the fragmentation routes of the product were fully assigned with electron-impact time-of-flight mass spectrometry(EI-TOF MS),which can also be used for the structural elucidation based on the molecular ion at m/z 455(16%)and three novel characteristic fragment ions at m/z 183(37%),425(7%),and 199(5%).The cyclohexadienone product is sensitive to acidic media.When it is treated with a trace of acid,another novel derivative containing an orthoquinone moiety is formed,which links with the metabolism of the cancer inhibitors.     

SULFATION OF PACHYMAN WITH CHLOROSULFONIC ACID USING THE IMPROVED WOLFROM METHOD

High purity polysaccharide of pachyman was isolated from the powder of Poria cocos sclerotium with an yield of 77.8%. The intrinsic viscosity of polysaccharide was found to be 78.95 mL/g in DMSO solution at 25℃. The isolated polysaccharide was reacted with chlorosulfonic acid to obtain pachyman sulfate using the improved Wolfrom method. The results of the orthogonality experiment on the sulfation reaction identified that the effectiveness of the reaction conditions on the degree of sulfation and the value of intrinsic viscosity is in the following order: molar ratio of chlorosulfonic acid to glucoside (3-5) ＞ reaction temperature (60-80℃) ＞ reaction time (1-2 h). The kinetic studies of the pachyman sulfationindicated that the hydrolysis is accompanied with the sulfation process. The decrease in intrinsic viscosity of the sulfated pachyman is proportional to the increase in the degree of sulfation under the mild reaction conditions of ＜ 80℃,chlorosulfonic acid/glucoside mole ratio ＜ 5, and reaction time ＜ 2 h. Beyond the above reaction conditions, excessive loss of -OH group occurs during hydrolysis. The NMR results indicated a complete sulfation on C-6 and a partial sulfation on the C-2 and C-4 of glucoside.     

A MALDI-MS sensing chip prepared by non-covalent assembly for quantitation of acid phosphatase

A novel sensing chip was designed for MALDI-MS quantitation of acid phosphatase(ACP).The ACP sensing chip was constructed through non-covalent interaction of streptavidin and biotin for the assembly of biotinylated peptide substrate on biotinylated polyethylene-glycol(PEG)modified indium-tin oxide(ITO)slide.In the presence of ACP,the peptide substrate was dephosphorylated under acidic condition to generate a new mass signal.The quantitative assay of ACP was achieved with the mass signal ratio of product to the sum of product and left peptide substrate.Under optimal detection conditions,the ratio was linearly correlated with the concentration of ACP in the range of 0.05–12 g/L with a detection limit(LOD)of 0.04 g/L.The designed ACP sensing chip has been used to analyze ACP in complex clinical samples,which exhibited high selectivity,good repeatability,and admirably anti-interference ability.This work further demonstrates the concept of MS sensing and the application of MALDI-MS in quantitative analysis,and provides a convenient method for the quantitation of proteases in clinical diagnosis.     

STUDIES ON BIO-ANTIOXIDANTS——PROOXIDATION OF VITAMIN E ON THE AUTOXIDATION OF LINOLEIC ACID IN SODIUM DODECYL SULFATE MICELLES

The reaction of vitamin E (α-tocopherol) with linoleic acid containing peroxidized linoleic acid has been studied. No significant reaction was found in ethanol solution, whereas in sodium dodecyl sulfate micelles vitamin E reacted rapidly with peroxidized linoleic acid, and thereby induced the peroxidation of linoleic acid, leading to oxygen absorption. The reaction kinetics was studied in detail by u. v. spectroscopy, HPLC and ESR spectroscopy. It was found that the main product was α-tocopherone with α-tocopheroxy radical as the reaction intermediate. A mechanism involving two consecutive bimolecular reactions between peroxidized linoleic acid and a-tocopherol and between peroxidized linoleic acid and a-tocopheroxy radical, with rate constant 2.93 and 6.21 mol/L-1s-1 respectively is proposed. The micellar effect on the reaction is discussed.     

SYNTHESES OF POLYMER-BOUND RHODIUM COMPLEXES AND THEIR APPLICATION AS CATALYSTS FOR THE HYDROFORMYLATION OF DIISOBUTYLENE (Ⅰ)

Copolymer of styrene-divinylbenzene in bead form (with DVB 8%, average pore radius 3.0×10~2, specific surface area 25m~2/g, particle size 0.2—0.4mm) was made by the suspension polymerization. After chloromethylation, the beads were then reacted with lithium diphenyl phosphine and various amines separately. Two types of polymeric ligands, i.e. polyvinylbenzyl diphenyl phosphine and eight kinds of polyvinylbenzyl amines were thus obtained. In order to prepare the polymer-bound rhodium complexes, the ligands were then reacted with [Rh(CO)_2CI]_2. The initial composition and structure of the polymeric complexes were verified by IR spectra. The complexes synthesized above were used to catalyze the hydroformylation of diisobutylene under conditions of 110℃, 100(120) kg/cm~2 and H_2/CO=1:1. The effects of the donor atoms (N, P) on the activity of the two types of catalysts and the N-substituted groups on the activity 'of polymeric amine-rhodium complexes were examined.     

Catalytic transformations of cellulose and its derived carbohydrates into 5-hydroxymethylfurfural,levulinic acid,and lactic acid

The catalytic transformation of cellulose into key building-block or platform chemicals such as 5-hydoxymethylfurfural(HMF),levulinic acid,and lactic acid under mild conditions,has attracted much attention in recent years,as these conversions can be operated without consumption of hydrogen or oxygen and thus are more economical compared to the hydrogenolysis or oxidation of cellulose.This review article highlights recent advances in the development of novel catalysts or catalytic processes for the conversion of cellulose and its derived carbohydrates into HMF,levulinic acid,and lactic acid or their esters under inert atmosphere.We also analyze efficient catalytic systems for HMF production,in particular Lewis acids combined with ionic liquid or biphasic systems.For the formations of levulinic and lactic acids or their esters,we focus on the reactions in aqueous and alcohol media catalyzed by multifunctional catalysts that combine the functions of hydrolysis,isomerization,and dehydration-rehydration or retro-aldol reactions.The reaction mechanism for each process will also be discussed to gain insights into the activation of C–O and C–C bonds in the absence of hydrogen or oxygen.     

Overwhelming decomposition of 4-bromo-4''''-cyanomethylbiphenylyl radical anion without electron transfer to 4,4''''-dibromobiphenyl

Dibromobiphenyl reacted with cynomethyl anion in ammonia under irradiation to form nucleophilic bis-substituted product in high yield without substantial monosubstituted product. Quantum yields for the formations of bis- and monosubstituted products were found to be 85.6 and 2.3×10-6 respectively, while the corresponding pseudo-first-order rates were 6.9×10-3 and 5.2×10-10 mol.L-1.S-1. Block up the possible electron transfer of 4-brome-4'-cyanomethylbiphenylyl radical anion to 4-cyanometbyl-biphenylyl radical and bromine ion.     

Synthesis and DNA Cleavage Studies of 2,6-Dimethoxyhydroquinone-3-Mercaptoacetic Acid Conjugates

In previous paper and work, we reported the synthesis and cytotoxicity studies of a novel series of short chain peptide conjugates of the cytotoxic agent 2, 6-dimethoxyhydro -quinone-3-mercaptoacetic acid1 (DMQ-MA). The DMQ-MA is a derivative of 2,6-dimethoxybenzoquinone, which is a natural product of fermented wheat germ and found to have a wide spectrum of cytotoxicity against various tumor cell lines under the synergistic activation of L-ascorbic acid (AH2)2,3. Compared with DMQ, DMQ…     

Carboxyl-functionalized Nanocellulose Reinforced Nanocomposite Proton Exchange Membrane

Nanocellulose(NCC) was prepared through the acid hydrolysis of microcellulose(MCC) and was reacted with maleic anliydride to obtain carboxyl-functionized nanocellulose(MA-NCCs). The presence of .OH and .SO3H on the surface of rod-like MA-NCC was confirmed by Fourier transfonn infrared spectrometry(FTIR). Sulfonated poly(aryl ether ether ketone ketone)(Ph-SPEEKK) was synthesized with bis(4-fluorophenyl-methanone) and 2-phenylhydroquinone as monomer. MA-NCC/Ph-SPEEKK nanocomposite membranes with different MA-NCCs content were prepared, and their properties were characterized. Compared with Ph-SPEEKK, MA-NCC/Ph-SPEEKK nanocomposite membrane showed better mechanical and thermal properties and higher proton conductivity. The proton conductivity of the composite membrane with 4%(mass fraction) MA-NCCs under 80℃ was 0.095 S/cm. And its tensile strength reached 30.3 MPa, which was 21.2% higher than that of Ph-SPEEKK pure polymer membrane.     

A preliminary experimental study of the boron concentration in vapor and the isotopic fractionation of boron between seawater and vapor during evaporation of seawater

A laboratory experiment was undertaken to investigate the behaviour of boron at the seawater-air interface under air flow conditions. Dried air at 25 and 35℃ was passed over or bubbled through seawater at the same temperature. A combination of ice-chilled condensers and KOH impregnated cellulose fibre filters was used to collect boron from the reacted air. When air stripped of boron was passed over the seawater, boron was found in the reacted air, and its concentration was higher in the higher temperature test. In the tests where air was bubbled through seawater the concentration of boron in the reacted air was directly proportional to the air flow rate. In this situation the boron in the reacted air was mainly introduced as a spray of microdroplets. Isotopic analysis of the collected boron in the non-bubbled tests yields fractionation factors which demonstrate that the lighter isotope, 10B, is enriched in the reacted air. The size of the fractionation changes with temperature, ruling out a purely kinetic e