Solid-state nitrogen-15 NMR and quantum chemical study of N,N-dimethylaniline derivatives

In this study the components of the nitrogen chemical shift (CS) tensor are examined for a series of para substituted N,N-dimethylaniline derivatives. This is done through measurement of the 15N NMR spectra of powder samples and through quantum chemical calculations on the isolated molecules. Experiments and calculations show that the isotropic CS, delta(iso), decreases with increasing electron donating ability of the para substituent, in agreement with previous solution studies. More importantly, this study shows that this decrease in the isotropic (solution) CS is due to decreasing values of the CS tensor component delta(11) and component delta(33). The component delta(22) is essentially invariant to the electron donating/withdrawing ability of the para substituent. Through Ramsey's theory of nuclear magnetic shielding, it can be seen that the variation in delta(11) and delta(33), and hence delta(iso), is due to changes in the n-pi* and the sigma-pi* energy gaps in N,N-dimethylaniline. This, in turn, is a result of the change in the energy of the pi* molecular orbital with change in the pi-electron donating ability of the para substituent. The effects of nitrogen inversion on the components of the nitrogen CS tensor components are also discussed. This study also shows the feasibility of performing 15N cross-polarization experiments on nonspinning powder samples at natural isotopic abundance.     

Experimental and computational characterization of the 17O quadrupole coupling and magnetic shielding tensors for p-nitrobenzaldehyde and formaldehyde

We have used solid-state 17O NMR experiments to determine the 17O quadrupole coupling (QC) tensor and chemical shift (CS) tensor for the carbonyl oxygen in p-nitro-[1-(17)O]benzaldehyde. Analyses of solid-state 17O NMR spectra obtained at 11.75 and 21.15 T under both magic-angle spinning (MAS) and stationary conditions yield the magnitude and relative orientation of these two tensors: CQ = 10.7 +/- 0.2 MHz, etaQ = 0.45 +/- 0.10, delta11 = 1050 +/- 10, delta22 = 620 +/- 10, delta33 = -35 +/- 10, alpha = 90 +/- 10, beta = 90 +/- 2, gamma = 90 +/- 10 degrees. The principal component of the 17O CS tensor with the most shielding, delta33, is perpendicular to the H-C=O plane, and the tensor component with the least shielding, delta11, lies along the C=O bond. For the 17O QC tensor, the largest (chi(zz)) and smallest (chi(xx)) components are both in the H-C=O plane being perpendicular and parallel to the C=O bond, respectively. This study represents the first time that these two fundamental 17O NMR tensors have been simultaneously determined for the carbonyl oxygen of an aldehyde functional group by solid-state 17O NMR. The reported experimental solid-state 17O NMR results provide the first set of reliable data to allow evaluation of the effect of electron correlation on individual CS tensor components. We found that the electron correlation effect exhibits significant influence on 17O chemical shielding in directions within the H-C=O plane. We have also carefully re-examined the existing experimental data on the 17O spin-rotation tensor for formaldehyde and proposed a new set of best "experimental" 17O chemical shielding tensor components: sigma11 = -1139 +/- 80, sigma22 = -533 +/- 80, sigma33 = 431 +/- 5, and sigma(iso) = -414 +/- 60 ppm. Using this new set of data, we have evaluated the accuracy of quantum chemical calculations of the 17O CS tensors for formaldehyde at the Hartree-Fock (HF), density-functional theory (DFT), M?ller-Plesset second-order perturbation (MP2), and coupled-cluster singles and doubles (CCSD) levels of theory. The conclusion is that, while results from HF and DFT tend to underestimate the electron correlation effect, the MP2 method overestimates its contribution. The CCSD results are in good agreement with the experimental data.     

Grand canonical Monte Carlo simulations of the 129Xe NMR line shapes of xenon adsorbed in (+/-)-[Co(en)3]Cl3

The 129Xe NMR line shapes of xenon adsorbed in the nanochannels of the (+/-)-[Co(en)3]Cl3 ionic crystal have been calculated by grand canonical Monte Carlo (GCMC) simulations. The results of our GCMC simulations illustrate their utility in predicting 129Xe NMR chemical shifts in systems containing a transition metal. In particular, the nanochannels of (+/-)-[Co(en)3]Cl3 provide a simple, yet interesting, model system that serves as a building block toward understanding xenon chemical shifts in more complex porous materials containing transition metals. Using only the Xe-C and Xe-H potentials and shielding response functions derived from the Xe@CH4 van der Waals complex to model the interior of the channel, the GCMC simulations correctly predict the 129Xe NMR line shapes observed experimentally (Ueda, T.; Eguchi, T.; Nakamura, N.; Wasylishen, R. E. J. Phys. Chem. B 2003, 107, 180-185). At low xenon loading, the simulated 129Xe NMR line shape is axially symmetric with chemical-shift tensor components delta(parallel) = 379 ppm and delta(perpendicular) = 274 ppm. Although the simulated isotropic chemical shift, delta(iso) = 309 ppm, is overestimated, the anisotropy of the chemical-shift tensor is correctly predicted. The simulations provide an explanation for the observed trend in the 129Xe NMR line shapes as a function of the overhead xenon pressure: delta(perpendicular) increased from 274 to 292 ppm, while delta(parallel) changed by only 3 ppm over the entire xenon loading range. The overestimation of the isotropic chemical shifts is explained based upon the results of quantum mechanical 129Xe shielding calculations of xenon interacting with an isolated (+/-)-[Co(en)3]Cl3 molecule. The xenon chemical shift is shown to be reduced by about 12% going from the Xe@[Co(en)3]Cl3 van der Waals complex to the Xe@C2H6 fragment.     

Solid-state NMR spectra and long intradimer bonds in the pi-[TCNE]22- dianion

The principal (13)C chemical-shift values for the pi-[TCNE](2)(2-) dimer anion within an array of counterions have been measured to understand better the electronic structure of these atypical chemical species in several related TCNE-based structures. The structure of pi-[TCNE](2)(2-) is unusual as it contains two very long C-C bond lengths (ca. 2.9 Angstroms) between the two monomeric units and has been found to exist as a singlet state, suggestive of a (1)A(1g) (b(2u)(2)b(1g)(0)) electronic configuration. A systematic study of several oxidation states of [TCNE](n) (n = 0, 1-, 2-) was conducted to determine how the NMR chemical-shift tensor values change as a function of electronic structure and to understand the interactions that lead to spin-pairing of the monomer units. The density functional theory (DFT) calculated nuclear shielding tensors are correlated with the experimentally determined principal chemical-shift values. Such theoretical methods provide information on the tensor magnitudes and orientations of their principal tensor components with respect to the molecular frame. Both theoretical and experimental ethylenic chemical-shielding tensors reveal high sensitivity in the component, delta(perpendicular), lying in the monomer molecular plane and perpendicular to the pi-electron plane. This largest shift dependence on charge density is observed to be about -111 ppm/e(-) for delta(perpendicular). The component in the molecular plane but parallel to the central C=C bond, delta(parallel), exhibits a sensitivity of approximately -43 ppm/e(-). However, the out-of-plane component delta'(perpendicular) shows a minimal dependence of -2.6 ppm/e(-) on the oxidation state (n) of [TCNE](n). These relative values support the claim that it is changes within the ethylenic pi-electrons and not the sigma-electrons that best account for the dramatic variations in bonding and shift tensors in this series of compounds. Concerning the intraion bonding, relatively weak Wiberg bond orders between the two monomeric components of the dimer correlate with the long bonds linking the two [TCNE(*)](-) monomers. The chemical-shift tensors for the cyano group, compared to the ethylene shifts, exhibit a reduced sensitivity on the TCNE oxidation state. The experimental principal chemical-shift components agree (within typical errors) with the calculated quantum mechanical shieldings used to correlate the bonding. The embedded ion model (EIM) was used to investigate the typically large electrostatic lattice potential in these ionic materials. Chemical-shielding principal values calculated with the EIM model differ from experiment by +/-3.82 ppm on average, whereas in the absence of an electrostatic field model, the experimental and theoretical results agree by +/-4.42 ppm, which is only a modest increase in error considering the overall ionic magnitudes associated with the tensor variations. Apparently, the effects of the sizable long-range electrostatic fields cancel when the shifts are computed because of lattice symmetry.     

Ring current effects in crystals. Evidence from 13C chemical shift tensors for intermolecular shielding in 4,7-di-t-butylacenaphthene versus 4,7-di-t-butylacenaphthylene

13C chemical shift tensor data from 2D FIREMAT spectra are reported for 4,7-di-t-butylacenaphthene and 4,7-di-t-butylacenaphthylene. In addition, calculations of the chemical shielding tensors were completed at the B3LYP/6-311G** level of theory. While the experimental tensor data on 4,7-di-t-butylacenaphthylene are in agreement with theory and with previous data on polycyclic aromatic hydrocarbons, the experimental and theoretical data on 4,7-di-t-butylacenaphthene lack agreement. Instead, larger than usual differences are observed between the experimental chemical shift components and the chemical shielding tensor components calculated on a single molecule of 4,7-di-t-butylacenaphthene, with a root mean square (rms) error of +/-7.0 ppm. The greatest deviation is concentrated in the component perpendicular to the aromatic plane, with the largest value being a 23 ppm difference between experiment and theory for the 13CH2 carbon delta11 component. These differences are attributed to an intermolecular chemical shift that arises from the graphitelike, stacked arrangement of molecules found in the crystal structure of 4,7-di-t-butylacenaphthene. This conclusion is supported by a calculation on a trimer of molecules, which improves the agreement between experiment and theory for this component by 14 ppm and reduces the overall rms error between experiment and theory to 4.0 ppm. This intermolecular effect may be modeled with the use of nuclei independent chemical shieldings (NICS) calculations and is also observed in the isotropic 1H chemical shift of the CH2 protons as a 4.2 ppm difference between the solution value and the solid-state chemical shift measured via a 13C-1H heteronuclear correlation experiment.     

GIAO/DFT evaluation of 13C NMR chemical shifts of selected acetals based on DFT optimized geometries

DFT/B3LYP calculations of the ground-state conformation of eight cyclic and acyclic acetals are presented and compared with experimental data. Results of single-point GIAO/DFT calculations at five different levels of theory show that isotropic shieldings need to be empirically scaled to achieve agreement with experimental chemical shifts. Statistical evaluation of data indicates that the most accurate prediction of 13C chemical shifts is achieved at the MPW1PW91/6-311G** level of theory. An empirical equation describing the relationship between delta values and shielding constants is postulated. This equation has been applied to the non-chair ground-state conformation of the six-membered acetonide and to the conformationally flexible benzodioxonine derivative. The agreement observed between the experimental and predicted chemical shifts shows that calculations at the MPW1PW91/6-311G** level of theory are adequate for addressing questions of conformation.     

Carbon-13 NMR shielding in the twenty common amino acids: comparisons with experimental results in proteins

We have used ab initio quantum chemical techniques to compute the (13)C(alpha) and (13)C(beta) shielding surfaces for the 14 amino acids not previously investigated (R. H. Havlin et al., J. Am. Chem. Soc. 1997, 119, 11951-11958) in their most popular conformations. The spans (Omega = sigma(33) - sigma(11)) of all the tensors reported here are large ( approximately 34 ppm) and there are only very minor differences between helical and sheet residues. This is in contrast to the previous report in which Val, Ile and Thr were reported to have large ( approximately 12 ppm) differences in Omega between helical and sheet geometries. Apparently, only the beta-branched (beta-disubstituted) amino acids have such large CSA span (Omega) differences; however, there are uniformly large differences in the solution-NMR-determined CSA (Deltasigma = sigma(orth) - sigma(par)) between helices and sheets in all amino acids considered. This effect is overwhelmingly due to a change in shielding tensor orientation. With the aid of such shielding tensor orientation information, we computed Deltasigma values for all of the amino acids in calmodulin/M13 and ubiquitin. For ubiquitin, we find only a 2.7 ppm rmsd between theory and experiment for Deltasigma over an approximately 45 ppm range, a 0.96 slope, and an R(2) = 0.94 value when using an average solution NMR structure. We also report C(beta) shielding tensor results for these same amino acids, which reflect the small isotropic chemical shift differences seen experimentally, together with similar C(beta) shielding tensor magnitudes and orientations. In addition, we describe the results of calculations of C(alpha), C(beta), C(gamma)1, C(gamma)2, and C(delta) shifts in the two isoleucine residues in bovine pancreatic trypsin inhibitor and the four isoleucines in a cytochrome c and demonstrate that the side chain chemical shifts are strongly influenced by chi(2) torsion angle effects. There is very good agreement between theory and experiment using either X-ray or average solution NMR structures. Overall, these results show that both C(alpha) backbone chemical shift anisotropy results as well as backbone and side chain (13)C isotropic shifts can now be predicted with good accuracy by using quantum chemical methods, which should facilitate solution structure determination/refinement using such shielding tensor surface information.     

Correlations between 31P chemical shift anisotropy and molecular structure in polycrystalline O,O'-dialkyldithiophosphate zinc(II) and nickel(II) complexes: 31P CP/MAS NMR and ab initio quantum mechanical calculation studies

Different potassium salts and zinc(II) and nickel(II) O,O'-dialkyldithiophosphate complexes were studied by solid-state 31P CP/MAS and static NMR and ab initio quantum mechanical calculations. Spectra were obtained at different spinning frequencies, and the intensities of the spinning sidebands were used to estimate the chemical shift anisotropy parameters. Useful correlations between the shapes of the 31P chemical shift tensor and the type of ligand were found: terminal ligands have negative values of the skew kappa, while bridging and ionic ligands have positive values for this parameter. The experimental results were compared with known X-ray diffraction structures for some of these complexes as well as with ab initio quantum mechanical calculations, and a useful correlation between the delta22 component of the 31P chemical shift tensor and the S-P-S bond angle in the O,O'-dialkyldithiophoshate zinc(II) and nickel(II) complexes was found: delta22 increases more than 50 ppm with the increase of S-P-S bond angle from ca. 100 degrees to 120 degrees , while the other two principal values of the tensor, delta11 and delta33, are almost conserved. This eventually leads to the change in sign for kappa in the bridging type of ligand, which generally has a larger S-P-S bond angle than the terminally bound O,O'-dialkyldithiophosphate group forming chelating four-membered P(ss)Me heterocycles.     

Acetylenic carbon-13 chemical shift tensors for diphenylacetylene and (eta2-Diphenylacetylene)Pt(PPh3)2: a solid-state NMR and theoretical study

The structure of (eta2-diphenylacetylene)Pt(PPh3) (2), as well as those of its dichloromethane and benzene solvates, is determined via X-ray crystallography. An investigation of the chemical shift (CS) tensors of the 13C-labeled carbons in Ph13C13CPh and (eta2-Ph13C13CPh)Pt(PPh3)2.(C6H6) is carried out via analysis of 13C NMR spectra from stationary solid samples. The principal components of the CS tensors as well as their orientations with respect to the 13C,13C internuclear vector are determined. DFT calculations of these CS tensors are in close agreement with the experimental values. For diphenylacetylene (tolane), the orientations and principal-component magnitudes of the alkynyl carbon CS tensors are comparable to those for other alkynyl carbons, although the CS tensor is not axially symmetric in this case. Coordination to platinum causes a change in the CS tensor orientation and a net increase in the isotropic chemical shift, resulting from a significant increase in two principal components (delta11 and delta33) while the third (delta22) decreases only slightly. The measured carbon CS tensors in the platinum complex bear a striking similarity to those of the alkenyl carbons in trans-Ph(H)C=C(H)Ph, and a short theoretical discussion of these observations is presented.     

Cluster models and ab initio calculations of (19)F NMR isotropic chemical shifts for inorganic fluorides

(19)F NMR isotropic chemical shift (delta(iso)) calculations are performed in crystallized compounds using the GIAO method with the B3LYP hybrid functional at DFT level. Clusters centered on the studied fluorine atoms mimic the crystalline structures. The 6-311+G(d) basis set is chosen for the central fluorine atom, and the LanL2DZ basis set for the others. The metal atoms are described by the 3-21G(2d) basis set or, when not available, by the CRENBL basis set with the corresponding ECP, and augmented with 2d polarization functions when existing. First, for high-symmetry systems (MF, MF(2), and MF(3) compounds), a systematization of the cluster building up from coordination spheres is proposed, generalized to fluoroperovskites and fluoroaluminates KAlF(4) and RbAlF(4). When applied to rather low symmetry systems such as barium fluorometalates BaMgF(4), BaZnF(4), and Ba(2)ZnF(6), the definition of the coordination spheres is far from easy. Then, for structures built up from a MF(6) octahedron network, we may define different "starting clusters": [FM(2)F(8)] for the shared fluorine atoms, [FMF(4)] for the unshared ones, and [FBa(4)](7+) for the "free" ones. Analogous "starting clusters" are then tested on compounds from the NaF-AlF(3), BaF(2)-AlF(3), and CaF(2)-AlF(3) binary systems and for alpha-BaCaAlF(7) that are also built up from a MF(6) octahedron network. For each of these corresponding fluorine sites, delta(iso) values are calculated with the "starting clusters" and several larger clusters and compared to the experimental delta(iso) values. For the barium-containing clusters, the RMS deviation is equal to 51 ppm. It is suggested that this result may be related to the poor quality of the barium basis sets for which no polarization functions are available for the moment. In total, chemical shifts were calculated for 122 fluorine sites, in a various range of compounds. For the clusters without barium, the ab initio method leads to a RMS equal to 22 ppm, which is a quite nice result keeping in mind that the (19)F chemical shift range is larger than 200 ppm.     

15N Chemical shielding in glycyl tripeptides: measurement by solid-state NMR and correlation with X-ray structure

15N chemical shielding parameters are reported for central glycyl residues in crystallographically characterized tripeptides with alpha-helix, beta-strand, polyglycine II (3(1)-helix), and extended structures. Accurate values of the shielding components (2-5 ppm) are determined from MAS and stationary spectra of peptides containing [2-(13)C,(15)N]Gly. Two dipolar couplings, (1)H-(15)N and (13)C(alpha)-(15)N, are used to examine (15)N shielding tensor orientations in the molecular frame and the results indicate that the delta(11), delta(33) plane of the shielding tensor is not coincident with the peptide plane. The observed isotropic shifts, which vary over a range of 13 ppm, depend on hydrogen bonding (direct and indirect) and local conformation. Tensor spans, delta(span) = delta(11) - delta(33), and their deviations from axial symmetry, delta(dev) = delta(22) - delta(33), vary over a larger range and are grouped according to 2 degrees structure. Augmented by previously reported (13)C(alpha) shielding parameters, a prediction scheme for the 2 degrees structure of glycyl residues in proteins based on shielding parameters is proposed.     

33S NMR spectra of sulfonium salts: calculated and experimental

33S NMR chemical shifts were calculated by the scaled DFT and EMPI approaches for the fluoride, chloride and bromide of trimethylsulfonium ion (1) and S-methyltetrahydrothiophenium ion (2), in addition to the free cations. Experimental values were obtained for the iodides of 1 (delta +48, CS2 = 0 ppm) and 2 (delta +95), and were found to agree with the calculated values well within the standard deviation of 35 ppm (3.5% of the shielding range) established in earlier work for a great variety of sulfur compounds. An earlier literature value of delta +750 for the iodide of 2 is therefore to be replaced. Calculations provide a shift of delta +68 for S-methylthianium ion with equatorial methyl, indicating that the reported value of delta +670 for the iodide is also incorrect.     

Calcium-43 chemical shift tensors as probes of calcium binding environments. Insight into the structure of the vaterite CaCO3 polymorph by 43Ca solid-state NMR spectroscopy

Natural-abundance (43)Ca solid-state NMR spectroscopy at 21.1 T and gauge-including projector-augmented-wave (GIPAW) DFT calculations are developed as tools to provide insight into calcium binding environments, with special emphasis on the calcium chemical shift (CS) tensor. The first complete analysis of a (43)Ca solid-state NMR spectrum, including the relative orientation of the CS and electric field gradient (EFG) tensors, is reported for calcite. GIPAW calculations of the (43)Ca CS and EFG tensors for a series of small molecules are shown to reproduce experimental trends; for example, the trend in available solid-state chemical shifts is reproduced with a correlation coefficient of 0.983. The results strongly suggest the utility of the calcium CS tensor as a novel probe of calcium binding environments in a range of calcium-containing materials. For example, for three polymorphs of CaCO3 the CS tensor span ranges from 8 to 70 ppm and the symmetry around calcium is manifested differently in the CS tensor as compared with the EFG tensor. The advantages of characterizing the CS tensor are particularly evident in very high magnetic fields where the effect of calcium CS anisotropy is augmented in hertz while the effect of second-order quadrupolar broadening is often obscured for (43)Ca because of its small quadrupole moment. Finally, as an application of the combined experimental-theoretical approach, the solid-state structure of the vaterite polymorph of calcium carbonate is probed and we conclude that the hexagonal P6(3)/mmc space group provides a better representation of the structure than does the orthorhombic Pbnm space group, thereby demonstrating the utility of (43)Ca solid-state NMR as a complementary tool to X-ray crystallographic methods.     

Phosphorus chemical shift tensors of phosphido ligands in ruthenium carbonyl compounds: (31)P NMR spectroscopy of single-crystal and powder samples and ab initio calculations

The phosphorus chemical shift (CS) tensors of several ruthenium carbonyl compounds containing a phosphido ligand, micro), bridging a Ru [bond] Ru bond were characterized by solid-state (31)P NMR spectroscopy. As well, an analogous osmium compound was examined. The structures of most of the clusters investigated have approximate local C(2v) symmetry about the phosphorus atom. Compared to the "isolated" PH(2)(-) anion, the phosphorus nucleus of a bridging phosphido ligand exhibits considerable deshielding. The phosphorus CS tensors of most of the compounds have spans ranging from 230 to 350 ppm and skews of approximately zero. Single-crystal NMR was used to investigate the orientation of the phosphorus CS tensors for two of the compounds, Ru(2)(CO)(6)(mu(2)-C [triple bond] C [bond] Ph)(mu(2)-PPh(2)) and Ru(3)(CO)(9)(mu(2)-H)(mu(2)-PPh(2)). The intermediate component of the phosphorus CS tensor, delta(22), lies along the local C(2) axis in both compounds. The least shielded component, delta(11), lies perpendicular to the Ru [bond] P [bond] Ru plane while the most shielded component, delta(33), lies perpendicular to the C [bond]P [bond] C plane. The orientation of the phosphorus CS tensor for a third compound, Ru(2)(CO)(6)(mu(2)-PPh(2))(2), was investigated by the dipolar-chemical shift NMR technique and was found to be analogous, suggesting it to be the same in all compounds. Ab initio calculations of phosphorus magnetic shielding tensors have been carried out and reproduce the orientations found experimentally. The orientation of the CS tensor has been rationalized using simple frontier MO theory. Splittings due to (99,101)Ru [bond] (31)P spin-spin coupling have been observed for several of the complexes. A rare example of (189)Os [bond] (31)P spin-spin splittings is observed in the (31)P MAS NMR spectrum of the osmium cluster, where (1)J((189)Os, (31)P) is 367 Hz. For this complex, the (189)Os nuclear quadrupolar coupling constant is on the order of several hundred megahertz.     

The prediction of (1)H chemical shifts in amines: a semiempirical and ab initio investigation

Twenty one conformationally fixed amines and their N,N-dimethyl derivatives were obtained commercially or synthesized. These included cis and trans 4-t-butyl cyclohexylamine, 2-exo and 2-endo norbornylamine, 2-adamantylamine, 4-phenylpiperidine, 1-napthylamine and tetrahydro-1-napthylamine. The (1)H NMR spectra of these amines were measured in CDCl(3) solution, assigned and the (1)H chemical shifts given. This data was used to investigate the effect of the amino group on the (1)H chemical shifts in these molecules. These effects were analyzed using the CHARGE model. This calculates the electric field and steric effects of the amino group for protons more than three bonds removed, together with functions for the calculation of two-bond and three-bond effects. The rotational isomerism about the C--N bond of the amino group was investigated by ab initio calculations of the potential energy surface (PES) about this bond at the HF/3-21G level. The resulting conformers were then minimized at the B3LYP/6-311 + + G (d,p) level. These geometries were then used to calculate the (1)H chemical shifts in the above compounds by CHARGE and the ab initio gauge-invariant atomic orbital (GIAO) method at the B3LYP/6-311 + + G(d,p) level and the shifts were compared with those observed. The compounds investigated gave 170 (1)H chemical shifts ranging from 0.60 to 8.2 ppm. The rms errors (obs.-calc.) were ca 0.1 ppm (CHARGE) and ca 0.2 ppm (GIAO). Large deviations of ca 1.0 ppm were observed for the NH protons in the GIAO calculations. The complex spectra of alkyl and aryl amines can thus be successfully predicted by both ab initio and semiempirical methods except for the NH protons, for which the ab initio calculations are not sufficiently accurate.     

Carbon chemical shift tensor components in quinolines and quinoline N-oxides

Chemical shift calculations are carried out for the quinoline carbons in 1,8-bis(2-isopropyl-4-quinolyl)naphthalene, 2-isopropylquinoline, amodiaquine, chloroquine, and quinine and the N-oxide of each compound. Ab initio calculations of the isotropic shielding values are in agreement with experimental chemical shifts. The calculations indicate that changes to the principal components of the shielding tensor upon N-oxidation are similar for each compound. Carbons 2, 4, 8, and 10 are largely shielded in each case as the nitrogen is oxidized. For C2, C4, and C10, this shielding is due to a large change in sigma11 and/or sigma22, indicating a change in pi-electron density. For C8, the large shielding change is due mainly to a change in sigma33, indicating a change in sigma-electron density. Upon examination and comparison of the calculated 13C shielding tensor components in the antimalarial drugs versus those in unsubstituted quinolines, it is found that amodiaquine and chloroquine have increased pi-electron density in the ring containing the amino side chain and quinine has increased pi-electron density in the opposite ring, containing the methoxy substituent.     

Ab initio and DFT studies of the vibrational spectra of hydrogen-bonded PhOH...(H2O)4 complexes

The vibrational characteristics (vibrational frequencies and infrared intensities) for the hydrogen-bonded complex of phenol with four water molecules PhOH...(H2O)4 (structure 4A) have been predicted using ab initio and DFT (B3LYP) calculations with 6-31G(d,p) basis set. The changes in the vibrational characteristics from free monomers to a complex have been calculated. The ab initio and B3LYP calculations show that the observed four intense bands at 3299, 3341, 3386 and 3430 cm(-1) can be assigned to the hydrogen-bonded OH stretching vibrations in the complex PhOH...(H2O)4 (4A). The complexation leads to very large red shifts of these vibrations and very strong increase in their IR intensity. The predicted red shifts for these vibrations with B3LYP/6-31G(d,p) calculations are in very good agreement with the experimentally observed. It was established that the phenolic OH stretching vibration is the most sensitive to the hydrogen bonding. The predicted red-shift with the B3LYP/6-31G(d,p) calculations for the most stable ring structure 4A (-590 cm(-1)) is in better agreement with the experimentally observed than the red-shift, predicted with SCF/6-31G(d,p) calculations. The magnitude of the wavenumber shift is indicative of relatively strong OH...H hydrogen-bonded interaction. The complexation between phenol and four water molecules leads to strong increase of the IR intensity of the phenolic OH stretching vibration (up to 38 times).