A novel ratiometric fluorescent Fe sensor based on a phenanthroimidazole chromophore

Phenanthroimidazole derivative 1 has been developed as a rare example of ratiometric fluorescent sensors for Fe³⁺. Interestingly, upon treatment with Fe³⁺, the sensor displayed a ratiometric fluorescent response with an enhancement of the ratios of emission intensities at 440 and 500 nm from 0.36 to 3.24. The detection range of the sensor for Fe³⁺ is in the 1.0 × 10⁻⁵-1.5 × 10⁻⁴ M concentration range and the detection limit is 5.26 × 10⁻⁶ M. In addition, the sensor showed good selectivity to Fe³⁺ with the selectivity coefficients (KFe3+=SFe3+/S₀) of Fe³⁺ over other metal ions tested in the range of 5-68.     

Fluorescent photoionic devices with two receptors and two switching mechanisms: applications to pH sensors and implications for metal ion detection

Two leading designs of fluorescent sensors are combined to yield the novel hybrid system of the ‘Fluorophore-Receptor₁-Spacer-Receptor₂’ format. We use 4-(dialkylaminoalkylamino)-7-nitrobenzo-2-oxa-1,3-diazoles as examples. The emission from internal charge transfer excited states in the present instances are highly responsive to N-H deprotonation as well as being quenched by intramolecular tertiary amine groups via photoinduced electron transfer (PET). When applied to pH sensing, this leads in favourable cases to two steps in the fluorescence-pH profile which can be viewed as a multi-stable photoionic device, even though single steps are more usual. The former situation is favoured when the two proton-associated equilibria are sufficiently separated on the pH scale and when the PET process is of moderate efficiency. These systems have the added feature of excitation/emission wavelengths in the visible region. As a secondary theme, we point out that caution is required when designing sensors for transition metal ions from systems with intrinsically proton-sensitive fluorescence due to receptors either integrated with or spaced from the fluorophore.     

A new Vilsmeier-type reaction for one-pot synthesis of pH sensitive fluorescent cyanine dyes

A new Vilsmeier-type reaction is suggested for the synthesis of novel indocarbocyanine pH sensors, which are fluorescent when protonated but nonfluorescent upon proton abstraction. These sensors show significant ratiometric UV-visible as well as fluorescence spectral changes upon subtle variation of pHs with pK_a values near neutral.     

Highly selective ratiometric fluorescent sensor for Cu(II) with two urea groups

A new Naphthalene derivative with two urea groups, 1,8-bis[N-(o-methoxyphenyl)ureido]naphthalene (BMPUN), was synthesized for detecting Cu(II) ratiometrically. Complexation between urea groups of BMPUN and Cu(II) with high selectivity gives rise to a great red-shift from 380 to 440 nm in the emission spectra. The introduction of electron donating groups is helpful to increase the electron density of the nitrogen atom of urea groups and then enhance the ability of complexation for Cu(II).     

A new fluorescent calix crown ether: synthesis and complex formation with alkali metal ions

We synthesised a new N-benzylaza-21-crown-7 ether 5 with a dihydroxy coumarin as a fluorescence sensor and investigated the binding behaviour towards alkali metal cations in methanol by fluorescence titrations. The association constants are within one order of magnitude, with the exception of sodium. Potassium is the preferred binding partner (K(Na)=330 M(-1); K(K)=8600 M(-1); K(Rb)=8200 M(-1); K(Cs)=4400 M(-1)). The corresponding aza-21-crown-7 ether (6) was attached by a methylene unit to a resorcarene to give fluorescent calix crown ether 12. The binding abilities of the calix crown ether towards alkali metal ions in methanol have also been investigated, and an increasing complex stability, distinct for potassium and rubidium in comparison with 5, was found: K(Na)=440 M(-1); K(K)=110,000 M(-1); K(Rb)=63,000 M(-1); K(Cs)=20,000 M(-1). Like bis(crown ether)s, a cooperative complexation of the crown ether and the cavitand scaffold can be assumed. The proposed complex geometry is supported by Kohn-Sham DFT calculations for the potassium and caesium complexes.     

A tetra-sulfonamide derivative bearing two dansyl groups designed as a new fluoride selective fluorescent chemosensor

A new fluorescent chemosensor based on an acyclic tetra-sulfonamide derivative linked to two dansyl groups has been conveniently synthesized. Its high selective binding ability to fluoride ions over other halide ions was demonstrated by using fluorescence as well as ¹H NMR spectra.     

Salicyaldehyde-based fluorescent sensors with high sensitivity for amino acids

Structurally simple salicylaldehyde-based fluoreseent sensors for amino acids have been obtained by one-step or two-step synthesis.These sensors show significant fluorescence enhancement in the presence of many amino acids at concentrations as low as 10~5 mol/L.The reversible reaction of the aldehydes with amino acids to form imines in aqueous solution is proposed to account for the observed fluorescence enhancement.     

Fluorescent cyclodextrins bearing metal binding sites and their use for chemo- and enantioselective sensing of amino acid derivatives

Ditopic receptors based on cyclodextrins bearing a metal binding site were used as enantioselective fluorescence sensors, which were able to generate different responses in the presence of d- or l-amino acids. The performances of the selectors as a function of their structure were evaluated, and the same analysis was extended to other analytes. In this work, this approach is used for the enantiomers of a series of amino acid derivatives and in particular of 2-aminocaprolactam. The results showed that the ability of these sensors to perform enantiomeric analysis can be extended to other analytes of interest in organic synthesis such as amino acid amides and α-aminolactams.     

BODIPY based fluorescent turn-on sensor for highly selective detection of HNO and the application in living cells

On the basis of BODIPY platform, a terpyridyl-substituent BODIPY-Copper complex (Cu(II)-BTPY) was rationally designed and synthesized as a redox reaction fluorescent sensor for detecting HNO over reactive oxygen species (ROS) and reactive nitrogen species (RNS) with impressive selectivity in living cells under mild and neutral conditions. The BTPY exhibits relatively high fluorescence quantum efficiency as much as 34.8% and presents large stokes shift, about 62 nm. When a series of transition metal ions were exploited to investigate the fluorescence quench towards BTPY, copper ion (Cu²⁺) gave the optimal result. After the fluorescence of the probe being effectively quenched in the presence of Cu²⁺, it can be in turn recovered through the reduction of Cu²⁺ into Cu⁺ by HNO accompanying with a visually observable fluorescence response. Still, the sensing mechanism was evidently confirmed by EPR and ESI-MS measurement. In addition, the employment of BTPY for imaging dyes was also presented in vivo.     

Microwave-assisted synthesis of 3-hydroxy-4-pyridinone/naphthalene conjugates. Structural characterization and selection of a fluorescent ion sensor

Two novel 3-hydroxy-4-pyridinone/naphthalene conjugates (L1 and L2) with different distances between the chelating and the fluorescent moieties were synthesized using conventional heating and microwave irradiation achieving a shorter reaction time. The structure of both compounds was confirmed by X-ray crystallography, revealing that these compounds were isolated as hydrochloride salts in dihydroxypyridinium forms. In solution and in the presence of a base, the tautomeric keto forms may be obtained as it was elucidated by NMR analysis. The dihydroxypyridinium form of L1 exhibits fluorescence at 450 nm, both in ACN and DMSO, whereas the corresponding keto form exhibits fluorescence at 365 nm. In contrast, the dihydroxypyridinium form of L2 only fluoresces in DMSO, exhibiting a band at 340 nm, while the keto form is non-fluorescent. These distinct fluorescent behaviors reveal that the tautomeric form in which the ligands are isolated and the distance between the chelating and fluorescent functions strongly influences their fluorescence properties. Ligand L1 exhibits better fluorescence properties and its fluorescence intensity is quenched in the presence of variable concentration of Cu²⁺, Zn²⁺, and Fe³⁺, thus making it suitable to be used as ion sensor.     

A highly enantioselective chiral Schiff-base fluorescent sensor for mandelic acid

A chiral Schiff-base compound, 4-methyl-2,6-bis-[(2-hydroxy-1-phenylethylimino)methyl]phenol, is found to act as highly enantioselective fluorescent agent for α-hydroxycarboxylic acid, e.g., mandelic acid. It is observed that, within a certain concentration range, one enantiomer of the chiral acid can increase the fluorescence intensity of the Schiff-base compound 122-fold while the other enantiomer enhances the intensity only 42-fold. Such highly enantioselective responses towards the chiral acid make the unusual Schiff-base compound attractive as a fluorescent sensor for determining the enantiomeric composition of α-hydroxycarboxylic acids.     

A new Hg-selective fluorescent sensor based on a dansyl amide-armed calix[4]-aza-crown

A new fluorescent chemosensor for Hg²⁺ based on a dansyl amide-armed calix[4]-aza-crown was reported. It exhibits high sensitivity and selectivity toward Hg²⁺ over a wide range of metal ions in MeCN-H₂O (4:1, v/v). The association constant of the 1:1 complex formation for 2-Hg²⁺ was calculated to be 1.31 × 10⁵ M⁻¹, and the detection limit for Hg²⁺ was found to be 4.1 × 10⁻⁶ mol L⁻¹.     

Highly selectively monitoring heavy and transition metal ions by a fluorescent sensor based on dipeptide

Fluorescent sensor (DMH) based on dipeptide was efficiently synthesized in solid phase synthesis. The dipeptide sensor shows sensitive response to Ag(I), Hg(II), and Cu(II) among 14 metal ions in 100% aqueous solution. The fluorescent sensor differentiates three heavy metal ions by response type; turn on response to Ag(I), ratiometric response to Hg(II), and turn off detection of Cu(II). The detection limits of the sensor for Ag(I) and Cu(II) were much lower than the EPA's drinking water maximum contaminant levels (MCL). Specially, DMH penetrated live cells and detected intracellular Ag⁺ by turn on response. We described the fluorescent change, binding affinity, detection limit for the metal ions. The study of a heavy metal-responsive sensor based on dipeptide demonstrates its potential utility in the environment field.     

A new fluorescent probe with ultralow background fluorescence for imaging of endogenous cellular selenol under oxidative stress

A new fluorescent probe (Rhod-Sec) for selenol detection with ultralow background fluorescence have been developed in this paper, which showed a 380-fold off-on fluorescence response, and can be applied to visualize the fluctuation of selenol in HepG2 cells through LPS-induced cells oxidation resistance.     

Novel simple fluorescent sensor for nickel ions

A novel pyrazoline with benzimidazole substituent was conveniently synthesized, starting from a chalcone and 2-hydrazinylpyridine. The addition of Ni²⁺ to ethanol solution of the synthesized pyrazoline resulted in a rapid color change from blue to green which allows the selective detection of Ni²⁺ ion over a great number of other metal ions. The association constant for the 1:1 complex was determined to be 2.72 × 10⁷ M^?1.     

A highly selective pyrene based fluorescent sensor toward Hg detection

A new pyrene-containing fluorescent sensor has been synthesized from 2,3,3-trimethylindolenine. Spectroscopic and photophysical properties of sensor are presented. The large change in fluorescence intensity (I/I₀ = 0.13) at 381 nm and affinity to Hg²⁺ over other cations such as K⁺, Na⁺, Ca²⁺, Mg²⁺, Pb²⁺, and Cu²⁺ make this compound a useful chemosensor for Hg²⁺ detection in hydrophilic media. The sensor (6.0 × 10⁻⁶ M) displays significant fluorescence quenching upon addition of Hg²⁺ in pH 7.4 HEPES buffer without excimer formation. Job’s plot analysis shows the binding stoichiometry to be 2:1 (host/guest).     

A fluorescent sensor for 2,3-bisphosphoglycerate using a europium tetra-N-oxide bis-bipyridine complex for both binding and signaling purposes

Host 1 was designed and synthesized as a fluorescent sensor for 2,3-bisphosphoglycerate (BPG, 3). The design features a tris-functionalized triethylbenzene core to preorganize binding groups. The three cationic moieties, a tetra-N-oxide bipyridine-europium complex and two ammonium groups, were included to complement the three anionic functionalities on the guest. Beyond acting as a binding site, the europium complex was used to signal binding of the guest through modification of the charge transfer emission. A 1:1 complex with BPG was determined in 50 % methanol/acetonitrile with a K(a) of 6.7 x 10(5) mol(-1) by monitoring the reduction of the fluorescence signal upon guest addition. In the titration of related glycolytic intermediates lacking a second phosphate (4-6) into host 1, 2:1 host to guest binding was observed. Similarly, control compound 2, which lacks the ammonium groups, binds BPG and 4-6 in a 2:1 fashion. Also, phenylphosphate 7 binds to host 1 in a 1:1 stoichiometry with a K(a) over three times less than 3.     

Fluorescent sensor array in a microfluidic chip

Miniaturization and automation are highly important issues for the development of high-throughput processes. The area of micro total analysis systems (muTAS) is growing rapidly and the design of new schemes which are suitable for miniaturized analytical devices is of great importance. In this paper we report the immobilization of self-assembled monolayers (SAMs) with metal ion sensing properties, on the walls of glass microchannels. The parallel combinatorial synthesis of sensing SAMs in individually addressable microchannels towards the generation of optical sensor arrays and sensing chips has been developed. [figure: see text] The advantages of microfluidic devices, surface chemistry, parallel synthesis, and combinatorial approaches have been merged to integrate a fluorescent chemical sensor array in a microfluidic chip. Specifically, five different fluorescent self-assembled monolayers have been created on the internal walls of glass microchannels confined in a microfluidic chip.     

A highly sensitive and selective fluorescent probe for Fe3+ containing two rhodamine B and thiocarbonyl moieties and its application to live cell imaging

A novel turn-on rhodamine B-based fluorescent chemosensor (RBCS) was designed and synthesized by reacting N-(rhodamine B)lactam-1,2-ethylenediamine and carbon disulfide. Upon addition of Fe³⁺ in EtOH/H₂O solution (2:1, v/v, HEPES buffer, 0.6?mM, pH 7.20), the RBCS displayed a significant fluorescence enhancement at 582?nm and a dramatic color change from colorless to pink, which can be detected by the naked eye. Significantly, the RBCS exhibited a highly selective and sensitive ability toward Fe³⁺. The detection limit of the probe was 2.05?×?10^?7?M. Job's plot indicated the formation of 1:1 complex between the RBCS and Fe³⁺. Moreover, the practical use of the RBCS is demonstrated by its application in the detection of Fe³⁺ in HeLa cells.