Enantioselective synthesis induced by chiral crystal composed of DL-serine in conjunction with asymmetric autocatalysis

Asymmetric autocatalysis initiated by chiral crystals containing racemic DL-serine was achieved. P- and M-crystals of DL-serine acted as the source of chirality of asymmetric autocatalysis to afford highly enantioenriched (>99.5% ee) (S)- and (R)-pyrimidylalkanols after the amplification of ee. This is the first example of the usage of the crystal, which contains the same number of D- and L-enantiomers as an origin of chirality in enantioselective synthesis.     

Determination of absolute configurations of amino acids by asymmetric autocatalysis of 2-alkynylpyrimidyl alkanol as a chiral sensor

Asymmetric autocatalysis of 2-alkynyl-5-pyrimidyl alkanol is employed as a chiral sensor of 20 amino acids. Asymmetric autocatalysis using amino acids as chiral initiators gave pyrimidyl alkanols of the absolute configurations that were correlated with those of the amino acids. The enantiomeric excesses of pyrimidyl alkanol are invariably high even when the enantiomeric excess of amino acids is as low as 0.1%. Thus, by determining the absolute configuration of pyrimidyl alkanol with high enantiomeric excess, one can determine the absolute configuration of amino acids even when their enantiomeric excess is low.     

Enantioselective synthesis mediated by chiral crystal of achiral hippuric acid in conjunction with asymmetric autocatalysis

Enantiomorphous crystals composed of achiral hippuric acid, i.e., naturally occurring N-benzoylglycine, have been used successfully as chiral inducers in enantioselective synthesis in combination with asymmetric autocatalysis to afford the product with extremely high enantiomeric excess.     

Enantioselective synthesis induced by tetrathia-[7]-helicenes in conjunction with asymmetric autocatalysis

Highly enantioenriched 5-pyrimidyl alkanol was formed using tetrathia-[7]-helicenes as a chiral initiator in the enantioselective addition of diisopropylzinc to pyrimidine-5-carbaldehyde, in conjunction with asymmetric autocatalysis.     

Studies directed towards asymmetric synthesis of levobupivacaine

We report herein the first catalytic asymmetric synthesis of levobupivacaine. The key step involves the asymmetric alkylation of N-benzylimine glycinamide (2b).     

Enantioselective organocatalytic synthesis of the chiral chromenes by domino oxa-Michael-aldol reaction

The proline based chiral organocatalyst has been found to be an efficient catalyst for enantioselective domino oxa-Michael-aldol reaction. This catalytic system provided the synthesis of substituted 2-aryl-2H-chromenes-3-carbaldehyde in good to high yields (73%–97%) with excellent enantioselectivity (up to 97%) and reasonable reaction times. The atom economy, high yield and mild reaction conditions are some of the important features of this protocol.     

Enantioselective synthesis of martinelline chiral core and its diastereomer using asymmetric tandem Michael-aldol reaction

The martinelline chiral core 3 and its diastereomer were synthesized by using the asymmetric tandem Michael-aldol reaction as the key step from 4-methoxycarbonylanthranilaldehyde and the α,β-unsaturated aldehyde.     

Enantioselective reactions of tert-butyl glycinate-benzophenone Schiff base catalyzed by chiral phase-transfer catalyst in aqueous media without any organic solvent

Chiral phase-transfer catalyzed enantioselective alkylations of tert-butyl glycinate-benzophenone Schiff base were investigated in aqueous media without any organic solvent. Reactions in aqueous media smoothly proceeded to give the desired product in higher yield than under standard liquid-liquid biphasic conditions. In aqueous media the formation of benzophenone, which was caused by in situ hydrolysis of Schiff base, was depressed.     

Operationally convenient, efficient asymmetric synthesis of enantiomerically pure 4-aminoglutamic acids via methylene dimerization of chiral glycine equivalents with dichloromethane

This paper presents a practical and efficient asymmetric synthesis of enantiomerically pure 4-aminoglutamic acids using a quite unusual methylene dimerization of chiral nucleophilic glycine equivalents with dichloromethane under phase-transfer catalysis (PTC) conditions. From a synthetic standpoint, the reported procedure is highly operationally convenient and scalable as it does not require any chromatographic purification of the intermediate products.     

Enantioselective syntheses of candenatenins B and C using a chiral anthracene auxiliary

The asymmetric syntheses of two anticancer natural products, candenatenins B and C, are described, leading to a revision of the originally assigned stereochemistries. The syntheses follow a Diels-Alder/retro-Diels Alder strategy using a chiral anthracene auxiliary to access both targets with 90% ee. The inherent structural qualities of the auxiliary allow for both regio- and diastereoselective transformations.     

手性膦过渡金属配合物催化不对称交叉偶联反应的研究

自1973年Consiglio和Botteghi首次报道用(一)-DIOP的NiCl_2配合物催化芳基或乙烯基卤代物与仲烷基卤化镁交叉偶联生成光学活性的偶联产物以来,化学家们对不对称交叉偶联反应进行了深入研究。Hayashi等用手性二茂铁膦和手性β-氨基烷基膦的NiCl_2和PdCl_2配合物催化1-苯基乙基氯化     

Application of polydentate chiral amines within magnesium-mediated asymmetric deprotonation reactions

A set of polydentate secondary amines, each containing two stereogenic centres, were prepared. These were subsequently utilised in magnesium-mediated asymmetric deprotonation reactions and excellent enantiomeric ratios were obtained (up to 94:6 er). Furthermore, these bases tend to be highly efficient in the absence of strong Lewis base additives, which demonstrates an additional practical advantage over existing protocols.     

A convenient asymmetric synthesis of the octalactin lactone

A facile asymmetric synthesis of the octalactin lactone was developed staring from (R)-cyclohexylideneglyceraldehyde (1). The key step of the synthesis is an In-mediated diastereoselective crotylation of 1 in water, which furnished the building blocks with the required stereochemistry under operationally simple conditions. Their conversion to the appropriate intermediates, invertive esterification and a ring closing metathesis reaction furnished the target compound.     

Resolution of BIPHEP on Rh with a chiral diene auxiliary

Resolution of the atropisomeric chiral BIPHEP ligand on Rh has been achieved with the aid of 2-(4-tert-butyl-phenyl)-8-methoxy-1,8-dimethyl-bicyclo[2.2.2]octa-2,5-diene, a chiral chelating diene ligand. The diene complex 3 containing an (S)-BIPHEP ligand was found to be configurationally stable in CDCl₃ solution at RT. Conversion of the diene complex 3 to a dicarbonyl Rh complex 4 that had a barrier of 25.0 kcal/mol for atropisomerization of the BIPHEP ligand. Preliminary studies of the use of the resolved complex 3 for catalysis are presented.     

MM3 force field prediction of the enantioselective preference in the asymmetric synthesis of a chiral 2-cyclohexen-1-ol using a chiral lithium amide reagent

Enantioselective preference in the asymmetric synthesis where cyclohexene oxide is transformed enantioselectively to chiral (S)- or (R)-2-cyclohexen-1-ol by the reaction with the appropriate chiral lithium amide reagent has been evaluated theoretically using the MM3 force field. The plausible possible structures for each precursor (reaction intermediate complex) leading to a (S)- or (R)-2-cyclohexen-1-ol have been optimized with the extended MM3 force field applicable to the lithium amide functional group, and the populations of their (S)- or (R)-reaction intermediate complexes at an ambient temperature (298 K) were calculated. The initial structure for evaluating the reaction intermediates of this asymmetric synthesis was constructed on the basis of the optimized ab initio transition state structure (MP2/6-31+G^∗) comprising lithium amide LiNH₂ and propene oxide. To the thus obtained transition state structure composed of LiNH₂ and propene oxide, the other remaining Cartesian coordinates for the actual reaction intermediates composed of the chiral lithium amides and cyclohexene oxide were added to make the reaction intermediate structure. The conformational search for the reaction intermediate has been carried out by using the Stochastic search Algorithm, and the optimized geometries and their conformational energies (steric energies) have been calculated by the MM3 force field. The populations calculated from the conformational energies of the reaction intermediate leading to the (S)- or (R)-2-cyclohexen-1-ol were shown to be linearly well correlated with the experimentally reported enantiomer excess (% ee) values. The critical factors to control the enantioselectivity were investigated on the basis of the optimized structures of the reaction intermediate complexes. The MM3 force field approach was shown to be applicable to the theoretical evaluation of the enantioselectivity and be useful for designing a new functional chiral lithium amide reagent for the asymmetric synthesis.     

Efficient construction of a chiral all-carbon quaternary center by asymmetric 1,4-addition and its application to total synthesis of (+)-bakuchiol

The conjugate addition of lithium divinylcuprate to (4S,2′E)-3-(6′-TBDPS-3′-methylhex-2′-enoyl)-4-phenyloxazolidin-2-one proceeded efficiently to create a chiral all-carbon quaternary center with a high diastereoselectivity (R:S = 95:5). The absolute configuration of the newly generated chiral center was confirmed by applying this methodology to the total synthesis of (+)-bakuchiol.