Reduction of sulfoxides catalyzed by oxo-complexes

This work reports the catalytic activity of the oxo-complexes HReO₄, MoO₂(acac)₂, WO₂Cl₂, and VO(acac)₂ in the reduction of sulfoxides with PhSiH₃ or HBcat. The results obtained showed that the catalyst systems PhSiH₃/HReO₄ (5 mol %) and HBcat/HReO₄ (5 mol %) are highly efficient for the deoxygenation of sulfoxides. The complex MoO₂(acac)₂ was also efficient, but the reactions required more time and heating. Finally, the complexes WO₂Cl₂ and VO(acac)₂ showed a moderate activity.     

Kinetics of the CH3 + HCl/DCl → CH4/CH3D + Cl and CD3 + HCl/DCl → CD3H/CD4 + Cl reactions: An experimental H atom tunneling investigation

The kinetics of the radical reactions of CH₃ with HCl or DCl and CD₃ with HCl or DCl have been investigated in a temperature controlled tubular reactor coupled to a photoionization mass spectrometer. The CH₃ (or CD₃) radical, R, was produced homogeneously in the reactor by a pulsed 193 nm exciplex laser photolysis of CH₃COCH₃ (or CD₃COCD₃). The decay of CH₃/CD₃ was monitored as a function of HCl/DCl concentration under pseudo-first-order conditions to determine the rate constants as a function of temperature, typically from 188 to 500 K. The rate constants of the CH₃ and CD₃ reactions with HCl had strong non-Arrhenius behavior at low temperatures. The rate constants were fitted to a modified Arrhenius expression k = QA exp (−E_a/RT) (error limits stated are 1σ + Students t values, units in cm³ molecule⁻¹ s⁻¹): k(CH₃ + HCl) = [1.004 + 85.64 exp (−0.02438 × T/K)] × (3.3 ± 1.3) × 10⁻¹³ exp [−(4.8 ± 0.6) kJ mol⁻¹/RT] and k(CD₃ + HCl) = [1.002 + 73.31 exp (−0.02505 × T/K)] × (2.7 ± 1.2) × 10⁻¹³ exp [−(3.5 ± 0.5) kJ mol⁻¹/RT]. The radical reactions with DCl were studied separately over a wide ranges of temperatures and in these temperature ranges the rate constants determined were fitted to a conventional Arrhenius expression k = A exp (−E_a/RT) (error limits stated are 1σ + Students t values, units in cm³ molecule⁻¹ s⁻¹): k(CH₃ + DCl) = (2.4 ± 1.6) × 10⁻¹³ exp [−(7.8 ± 1.4) kJ mol⁻¹/RT] and k(CD₃ + DCl) = (1.2 ± 0.4) × 10⁻¹³ exp [−(5.2 ± 0.2) kJ mol⁻¹/RT] cm³ molecule⁻¹ s⁻¹.     

Dinuclear oxomolybdenum(VI) acetylacetonates: Crystal and molecular structure of Mo2O5(acac)2L2 (L = D2O,DMF)

The behavior of MoO₂(acac)₂ (acac = acetylacetonate) towards representative amines, amides, sulfoxides and phosphine oxides in common solvents has been examined. Compounds of the composition Mo₂O₅(acac)₂L₂ [L = H₂O, D₂O, dimethylformamide (DMF), dimethylacetamide (DMA), dimethylbenzamide (DMBA), tetramethylurea (TMU), dimethylsulfoxide (DMSO), dibutylsulfoxide (Bu₂SO), p-tolylsulfoxide (p-Tol₂SO), tributylphosphine oxide (OPBu₃), triphenylphosphine oxide (OPPh₃), hexamethylphosphoramide (HMPA)], derived from partial hydrolysis of MoO₂(acac)₂ followed by condensation and coordination of L, can readily be isolated. The crystal and molecular structures of Mo₂O₅(acac)₂L₂ (L = D₂O, DMF) have been established by X-ray diffraction analysis.     

Reactivity of ZrCl4 and HfCl4 with silylamines and thermal decomposition of the compounds [MCl4{NH(R)(SiR′3)}] (M = Zr,Hf, R = tBu,R′ = Me; R = SiR′3 = SiMe3, SiMe2H)

The Lewis acid/base adducts [MCl₄{NH(R)(SiR′₃)}] (M = Zr, Hf; R = tBu, R′ = Me; R = SiR′₃ = SiMe₃, SiMe₂H) were synthesized by the 1:1 reaction of MCl₄ with NH(R)(SiR′₃) in dichloromethane solution at room temperature. The decomposition of [MCl₄{NH(R)(SiR′₃)}] proceeds with the elimination of R′₃SiCl, as shown by thermogravimetric analysis. Pyrolysis of the compounds at 620 °C under inert conditions (N₂, vacuum) afforded powders of composition [ClMN] or [Cl₂MNH]. Preliminary low pressure chemical vapour deposition experiments show that [MCl₄{NH(R)(SiR′₃)}] deposits thin films of metal nitride contaminated with metal oxide.     

Thermodynamic properties on quaternary aqueous solutions of chlorides charge-type 1-1*2-1*2-1: XCl + MgCl2 + CaCl2 + H2O with (X ≡ Na; NH4)

In this investigation, the quaternary aqueous solutions of chlorides charge-type 1-1*2-1*2-1 with a cation (Na⁺; NH₄⁺; Mg²⁺; Ca²⁺) have been studied using the hygrometric method at 298.15 K. The water activities of the systems NH₄Cl + MgCl₂ + CaCl₂ + H₂O and NaCl + MgCl₂ + CaCl₂ + H₂O are measured at total molalities from 0.60 mol kg⁻¹ to saturation for different ionic-strength fractions NH₄Cl or NaCl, y = 0.20, 0.50, 0.80, and z ratio ionic-strength for other solutes, with z = 0.20, 0.50 and 0.80 for each y. The obtained data allow the deduction of osmotic coefficients.     

Solid-liquid phase equilibria in the system water + methanol + MgSO4·7H2O + MnSO4·4H2O

The solubilities and complex phase equilibria for the system of MnSO₄·4H₂O + MgSO₄·7H₂O + H₂O + CH₃OH were determined at the temperatures 291.2 and 301.2 K over the methanol mole fraction range of 0.00–0.12.The solubility data were used for modelling with the modified extended electrolyte non-random two-liquid equation. The salting-out effect of MgSO₄ and methanol on the solubilities of two manganese salts (MnSO₄·H₂O and MnSO₄·4H₂O) are represented in the several thermodynamic figures as a function of temperature. The solventing-out effect was stronger than the salting-out effect, which results in a decrease of the solubilities of manganese, salts even though the solubility of MnSO₄·H₂O decreased and solubility of MgSO₄·4H₂O increased as temperature increased.     

Alkaline earth metal poly(hydrogen fluorides) hexafluoroarsenates(V) and hexafluorophosphate(V): M2(H2F3)(HF2)2(AF6) (M = Ca, A = As; M = Sr, A = As, P)

New compounds of the type M₂(H₂F₃)(HF₂)₂(AF₆) with M = Ca, A = As and M = Sr, A = As, P) were isolated. Ca₂(H₂F₃)(HF₂)₂(AsF₆) was prepared from Ca(AsF₆)₂ with repeated additions of neutral anhydrous hydrogen fluoride (aHF). It crystallizes in a space group P4₃22 with a = 714.67(10) pm, c = 1754.8(3) pm, V = 0.8963(2) nm³ and Z = 4. Sr₂(H₂F₃)(HF₂)₂(AsF₆) was prepared at room temperature by dissolving SrF₂ in aHF acidified with AsF₅ in mole ratio SrF₂:AsF₅ = 2:1. It crystallizes in a space group P4₃22 with a = 746.00(12) pm, c = 1805.1(5) pm, V = 1.0046(4) nm³ and Z = 4. Sr₂(H₂F₃)(HF₂)₂(PF₆) was prepared from Sr(XeF₂)_n(PF₆)₂ in neutral aHF. It crystallizes in a space group P4₁22 with a = 737.0(3) pm, c = 1793.7(14) pm, V = 0.9744(9) nm³ and Z = 4. The compounds M₂(H₂F₃)(HF₂)₂(AF₆) gradually lose HF at room temperature in a dynamic vacuum or during being powdered for recording IR spectra or X-ray powder ray diffraction patterns. All compounds are isotypical with coordination of nine fluorine atoms around a metal center forming a distorted Archimedian antiprism with one face capped. This is the first example of the compounds in which H₂F₃⁻ and HF₂⁻ anions simultaneously bridge metal centers forming close packed three-dimensional network of polymeric compounds with low solubility in aHF. The HF₂⁻ anions are asymmetric with usual F?F distances of 227.3-228.5 pm. Vibrational frequency (ν₁) of HF₂⁻ is close to that in NaHF₂. The anion H₂F₃⁻ exhibits unusually small F?F?F angle of 95.1°-97.6° most probably as a consequence of close packed structure.     

Kinetics and mechanism of hydroboration reactions of HBBr2 · SMe2 and HBCl2 · SMe2 - Application of B NMR spectroscopy

The kinetics and mechanism of the hydroboration reactions of 1-octene with HBBr₂ · SMe₂ and HBCl₂ · SMe₂, in CH₂Cl₂ as a solvent, were studied. Rates of hydroboration were monitored using ¹¹B NMR spectroscopy. The reactions exhibited simple second-order kinetics of the form . The HBCl₂ · SMe₂ was found to be 20 times more reactive than the HBBr₂ · SMe₂. The overall activation parameters (ΔH^≠, ΔS^≠) for the reaction of HBBr₂ · SMe₂ with 1-octene were found to be 82 ± 1 kJ mol⁻¹, −18 ± 4 J K⁻¹ mol⁻¹ and with 1-hexyne were 78 ± 4 kJ mol⁻¹ −34 ± 12 J K⁻¹ mol⁻¹. For the reaction of HBCl₂ · SMe₂ with 1-octene, ΔH^≠ and ΔS^≠ were 104 ± 5 kJ mol⁻¹ and 43 ± 16 J K⁻¹ mol⁻¹, respectively. The activation parameters (ΔH^≠, ΔS^≠) for the dissociation of Me₂S from HBBr₂ · SMe₂ were found to be 104 ± 2 kJ mol⁻¹, +33 ± 8 J K⁻¹ mol⁻¹, respectively. Based on the activation parameters, it was concluded that the detaching of Me₂S from the boron centre follows a dissociative mechanism, while the hydroboration process follows an associative pathway. It was also concluded that the dissociation of Me₂S from the boron centre is the rate determining step.     

Separation of aromatic hydrocarbons from alkanes using ammonium ionic liquid C2NTf2 at T = 298.15 K

(Liquid + liquid) equilibrium data are presented for four ternary systems of an alkane, or aromatic compound and ethyl(2-hydroxyethyl)dimethylammonium bis{(trifluomethyl)sulfonyl}imide (C₂NTf₂) at 298.15 K: [hexane + benzene + C₂NTf₂], [hexane + p-xylene + C₂NTf₂], and [hexane, or octane + m-xylene + C₂NTf₂]. The separation of aromatic hydrocarbons (benzene, or p-xylene, or m-xylene) from aliphatic hydrocarbons (hexane, or octane) is investigated by extraction with the ammonium ionic liquid. Selectivities and distribution ratios are discussed for these mixtures at constant temperature. The data were analysed and compared to those previously reported for other ionic liquids and especially for the system {hexane + benzene + [EMIM][NTf₂]}. The nonrandom two liquid NRTL model was successfully used to correlate the experimental tie-lines and to calculate the phase compositions of the ternary systems.     

H2O + Fe(NO3)3 + Ni(NO3)2 ternary system isotherms at 0 °C and 30 °C

H₂O + Ni(NO₃)₂ binary system were investigated in the temperature range from −25 °C to 55 °C. The solid-liquid equilibria of the ternary system H₂O + Fe(NO₃)₃ + Ni(NO₃)₂ were studied using a synthetic method based on conductivity measurements. Tow isotherms were established at 0 °C and 30 °C, and the appearing stable solid phases are iron nitrate nonahydrate (Fe(NO₃)₃·9H₂O), iron nitrate hexahydrate (Fe(NO₃)₃·6H₂O), nickel nitrate hexahydrate (Ni(NO₃)₂·6H₂O) and nickel nitrate tetrahydrate (Ni(NO₃)₂·4H₂O).     

Phase diagram of Na2S2O3 + ethanol + water at ambient pressure and temperature

In the present communication, we report the studies concerning liquid–liquid–solid equilibria for the ternary system sodium thiosulphate (Na₂S₂O₃) + ethanol + water at ambient pressure and at room temperature (303 ± 2 K). The solubility data of Na₂S₂O₃ are reported for solutions in water, ethanol and solutions of varying concentrations of ethanol in water. The phase diagram for the said system is developed, described and compared with similar system K₂CO₃ + methanol + water. These results have been explained in terms of structural properties of aqueous ethanol solutions and further discussed in terms of the effect of ions to cause phase separation.     

Synthesis and coordinating properties of the facultative Sb2O- and As2O-donor ligands O{(CH2)2ER2}2 (E = Sb or As; R = Ph or Me)

The new mixed Sb₂O-donor ligands O{(CH₂)₂SbR₂}₂ (R = Ph, 1; R = Me, 2) with flexible backbones have been prepared in good yields as air-sensitive oils from reaction of NaSbR₂ with 0.5 mol equivalents of O(CH₂CH₂Br)₂ in thf solution. The As₂O-donor analogues, O{(CH₂)₂AsR₂}₂ (R = Ph, 3; R = Me, 4) were obtained similarly from LiAsPh₂ or NaAsMe₂, respectively and O(CH₂CH₂Br)₂, although ligand 4 appears to be considerably less stable with respect to C-O bond fission under some conditions than the other ligands. Using O(CH₂CH₂Cl)₂ leads only to partial substitution by the SbPh₂⁻ or AsPh₂⁻ nucleophile. These ligands behave as bidentate chelating Sb₂- or As₂-donors in the distorted tetrahedral [M(L-L)₂]BF₄ (M = Cu or Ag; L-L = 1-4) on the basis of solution ¹H and ⁶³Cu NMR spectroscopic studies, mass spectrometry and microanalyses. Crystal structures of three representative examples with Cu(I) and Ag(I) confirm the distorted tetrahedral Sb₄ or As₄ coordination at the metal and allow comparisons of geometric parameters. The crystallographic identification of an unexpected Cu(I)-Cu(I) complex, [Cu₂{Me₂As(CH₂)₂OH}₃](BF₄)₂, obtained as a by-product via C-O bond fission within ligand 4 is also reported. The distorted octahedral [RhCl₂(L-L)₂]Cl and the distorted square planar cis-[PtCl₂(L-L)] (L-L = 1 or 2) are also described. The ether O atoms are not involved in coordination to the metal ion in any of the late transition metal complexes isolated.     

Thermodynamic representation of the NaCl + Na2SO4 + H2O system with electrolyte NRTL model

A comprehensive thermodynamic model based on the electrolyte NRTL (eNRTL) activity coefficient equation is developed for the NaCl + H₂O binary, the Na₂SO₄ + H₂O binary and the NaCl + Na₂SO₄ + H₂O ternary. The NRTL binary parameters for pairs H₂O-(Na⁺, Cl⁻) and H₂O-(Na⁺, SO₄²⁻), and the aqueous phase infinite dilution heat capacity parameters for ions Cl⁻ and SO₄²⁻ are regressed from fitting experimental data on mean ionic activity coefficient, heat capacity, liquid enthalpy and dissolution enthalpy for the NaCl + H₂O binary and the Na₂SO₄ + H₂O binary with electrolyte concentrations up to saturation and temperature up to 473.15 K. The Gibbs energy of formation, enthalpy of formation and heat capacity parameters for solids NaCl_(s), NaCl·2H₂O_(s), Na₂SO_4(s) and Na₂SO₄·10H₂O_(s) are obtained by fitting experimental data on solubilities of NaCl and Na₂SO₄ in water. The NRTL binary parameters for the (Na⁺, Cl⁻)-(Na⁺, SO₄²⁻) pair are regressed from fitting experimental data on dissolution enthalpies and solubilities for the NaCl + Na₂SO₄ + H₂O ternary.     

Thermodynamic evaluation and optimization of the (Na2SO4 + K2SO4 + Na2S2O7 + K2S2O7) system

A complete, critical evaluation of all phase diagram and thermodynamic data was performed for all phases of the (Na₂SO₄ + K₂SO₄ + Na₂S₂O₇ + K₂S₂O₇) system and optimized model parameters were obtained. The Modified Quasichemical Model in the Quadruplet Approximation was used for modelling the liquid phase. The model evaluates first- and second-nearest-neighbour short-range ordering, where the cations (Na⁺ and K⁺) are assumed to mix on a cationic sublattice, while anions were assumed to mix on an anionic sublattice. The Compound Energy Formalism was used for modelling the solid solutions of (Na,K)₂SO₄ and (Na,K)₂S₂O₇. The models can be used to predict the thermodynamic properties and phase equilibria in multicomponent heterogeneous systems. The experimental data from the literature were reproduced within experimental error limits.     

Study of oxygen adsorption on β-Si3N4(0 0 0 1) by the density functional theory

The density functional theory (DFT) B3LYP method is used to theoretically investigate the interaction of O₂ with the β-Si₃N₄ surface (0 0 0 1) at 1200 °C. All the calculations have been performed at the 6-31G^∗ basis set level using H-saturated cluster. From the total energy minimization, the chemisorption on the center of the molecule lying above an Si site and the molecular axis paralleling to the surface is the most stable. After adsorption, the O–O bond is easier to dissociate compared to the free O₂. The electron transferred from the substrate to the O₂ molecule occupies the O₂ anti-bonding orbital, thus leading to a weakening off the bond strength, which is reflected by the elongated O₂ bond length. The changing trend of the O–O population and vibrational frequency is consistent with the change of the O–O bond length. The significant chemisorption energy and the short adsorption bond length indicate that the oxidation occurs on the β-Si₃N₄(0 0 0 1) surface at 1200 °C more easily.     

Enthalpy of mixing in 0.8[xB2O3-(1 − x)P2O5]-0.2Na2O glasses at 298 K

0.8[xB₂O₃-(1 − x)P₂O₅]-0.2Na₂O (with 0 ≤ x ≤ 1) glasses have been characterized by solution calorimetry at 298 K in acid solvent. The experimental data showed a strong negative departure of the enthalpy of mixing from the ideality described by the equation (in kJ/mol): ΔH = x(1 − x)(−660.2 + 570x). The results were interpreted on the basis of the structural data. Enthalpies of mixing were consistent with sub-regular solution behaviour.     

Preparation, crystal structures, EPR and reflectance spectra of two new charge-transfer salts, [CpFeCpCH2N(CH3)3]4[XMo12O40] · nCH3CN (n = 0 for X = P or n = 1 for X = Ge)

Two new charge-transfer salts, [CpFeCpCH₂N(CH₃)₃]₄[PMo₁₂O₄₀] · CH₃CN (1) and [CpFeCpCH₂N(CH₃)₃]₄[GeMo₁₂O₄₀] (2), were synthesized by the traditional solution synthetic method and their structures were determined by single-crystal X-ray analysis. Salt 1 belongs to the triclinic space group P1, and salt 2 belongs to the triclinic space group . There exist the complex interactions of the cationic ferrocenyl donor and Keggin polyanion in the solid state. The solid state UV-Vis diffuse reflectance spectra indicate the presence of a charge-transfer band climbing from 450 nm to well beyond 900 nm for 1, a charge-transfer band from 460 to 850 nm with λ_max = 630 nm for 2.The EPR spectra of salts 1 and 2 at 77 K show a signal at g = 2.0048 and 1.9501, respectively, ascribed to the delocalization of one electron in reduced Keggin ion in salt 1 and the Mo^VI in [GeMo₁₂O₄₀]⁴⁻ is partly reduced to Mo^V owing to the charge-transfer transitions taking place between the ferrocenyl donors and the POM acceptors. The two compounds were also characterized by IR spectroscopy and cyclic voltammetry.     

Vapour pressure and excess Gibbs free energy of the ternary system {x1CH3F + x2HCl + x3N2O} at temperature of 182.33 K

The equilibrium pressure of ternary mixtures of {x₁CH₃F + x₂HCl + x₃N₂O} covering the entire composition range has been measured at temperature of 182.33 K by the static method. The system exhibits a minimum pressure for the binary {x₁CH₃F + x₂HCl}. The molar excess Gibbs free energy has been calculated from the experimental equilibrium pressure. For the equimolar mixture . The (p, x, y) surface for the ternary system and the corresponding curves for the three constituent binary mixtures obtained from the Peng-Robinson equation of state are in agreement with the experimental data.     

Density functional theory study on structural isomers and bonding of model complexes M(CO)5(BH3 · PH3) (M = Cr, Mo, W) and W(CO)5(BH3 · AH3) (A = N, P, As, Sb)

The influence of group 15 various substituents and effect of metal centers on metal-borane interactions and structural isomers of transition metal-borane complexes W(CO)₅(BH₃ · AH₃) and M(CO)₅(BH₃ · PH₃) (A = N, P, As, and Sb; M = Cr, Mo, and W), were investigated by pure density functional theory at BP86 level. The following results were observed: (a) the ground state is monodentate, η¹, with C₁ point group; (b) in all complexes, the η¹ isomer with C_S symmetry on potential energy surface is the transition state for oscillating borane; (c) the η² isomer is the transition state for the hydrogens interchange mechanism; (d) in W(CO)₅(BH₃ · AH₃), the degree of pyramidalization at boron, interaction energy as well as charge transfer between metal and boron moieties, energy barrier for interchanging hydrogens, and diffuseness of A increase along the series A = Sb < As < P < N; (e) in M(CO)₅(BH₃ · PH₃), interaction energy is ordered as M = W > Cr > Mo, while energy barrier for interchanging hydrogens decreases in the order of M = Cr > W > Mo.