Synthesis and structures of dinuclear iron, molybdenum and tungsten complexes derived from (PhCHCHPh)-coupled bis(cyclopentadiene)

Reductive coupling of phenylfulvene with amalgamated calcium metal followed by hydrolysis yields CpPhCHCHPhCp (1) in high yield. Refluxing ligand 1 and Fe(CO)₅ in xylene produces (PhCHCHPh)-coupled bis(cyclopentadienyl) tetracarbonyl diiron (PhCHCHPh)[(η⁵-C₅H₄)Fe(CO)₂]₂ (2) as a mixture of meso (2-meso) and racemic isomers (2-rac). The pure racemic isomers of the Mo and W analogues (3-rac and 4-rac) have been synthesized by lithiation of ligand 1 and addition of (MeCN)₃M(CO)₃ (M = Mo, W) followed by oxidation with 2 equiv. of ferrocenium tetrafluoroborate. All the new complexes have been fully characterized. The molecular structures of 1-meso, 2-meso, 2-rac, 3-rac, and 4-rac have been determined by X-ray diffraction analysis.     

Syntheses of rac/meso-{PhP(3-t-Bu-C5H3)2}-Zr{RN(CH2)3NR}, structural analyses of rac-{PhP(3-t-Bu-C5H3)2}Zr{RN(CH2)3NR} (where R is SiMe3 or Ph), and meso to rac isomerization

Syntheses of rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{Me₃SiN(CH₂)₃NSiMe₃} (rac-3/meso-3) and rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{PhN(CH₂)₃NPh} (rac-4/meso-4) were achieved by metallation of K₂[PhP(3-t-Bu-C₅H₃)₂] · 1.3 THF (2) with Zr{RN(CH₂)₃NR}Cl₂(THF)₂ (where R = SiMe₃ or Ph, respectively) using ethereal solvent. These isomeric pairs were characterized by ¹H, ¹³C{¹H}, and ³¹P{¹H} NMR spectroscopy; rac-3 and rac-4 were also examined via single crystal X-ray crystallography. The structures of rac-3 and rac-4 are notable in the tendency of the cyclopentadienyl rings towards η³ coordination. While isolated samples of rac-3/meso-3 and rac-4/meso-4 slowly isomerize in tetrahydrofuran-d₈ to equilibrium ratios, the isomerization rate for 3 is more than 15-fold greater than that for 4. In addition, equilibrium ratios are rapidly reached when isolated samples of rac-3/meso-3 and rac-4/meso-4 are exposed to tetrabutylammonium chloride in tetrahydrofuran-d₈ solvent. We propose that a nucleophile (either chloride or the phosphine interannular linker) brings about dissociation of one cyclopentadienyl ring, thus promoting the rac/meso isomerization mechanism.     

Structural diversity of indium complexes containing a tetradentate (OSSO)-type bis(phenolate) ligand

Indium bis(phenolato) complexes [{In(CH₃)₂(THF)}₂(L)] (L = 1,4-dithiabutanediylbis(4,6-di-tert-butylphenolato) (etbbp), 2) and [In(cytp)(CH₃)]₂ (L = (1,2-cyclohexanediyldithio)-2,2′-diphenolato (rac-cytp), 3) were prepared from [In(CH₃)₃] and the tetradentate 1,2-dithiaalkanediyl-bridged bis(phenol) LH₂. The nature of the ligand bridging two indium centers was shown by X-ray diffraction studies of the complex [{In(CH₃)₂(THF)}₂(etbbp)] (2) that was synthesized from complex [In(etbbp)(CH₃)(THF)_n] (1) by reaction with a second equivalent of [In(CH₃)₃]. A related ligand without bulky substituents on the aromatic rings leads to the dimeric compound [In(cytp)(CH₃)]₂ (3) with distorted octahedral configuration in the solid state. It was converted into the cation [In(cytp)]⁺ by methyl abstraction with [B(C₆F₅)₃].     

Mono- and bis-(2-dimethylaminoethyl)tetramethylcyclopentadienyl zirconium(IV) complexes: synthesis and structural studies in crystalline state and in solutions

A novel half-sandwich Zr(IV) complex [η⁵:η¹-N-C₅(CH₃)₄CH₂CH₂N(CH₃)₂]ZrCl₃ (6) together with zirconocene dichlorides [η⁵-C₅(CH₃)₄CH₂CH₂N(CH₃)₂][η⁵-C₅(CH₃)₅]ZrCl₂ (4) and [η⁵-C₅(CH₃)₄CH₂CH₂N(CH₃)₂]₂ZrCl₂ (5) have been prepared. Complex 6 has been isolated and characterized in three different forms, namely, as an adduct with THF 6a, an adduct with tetrahydrothiophene 6b, and a solvent-free form 6c. Molecular structures of complexes 4, 6b, and 6c have been established by X-ray diffraction analysis. Complex 6c has been shown to be a monomeric solvent-free half sandwich Zr(IV) complex. The dynamic behavior of complex 6a in a non-solvating medium (an equilibrium between 6a and 6c along with a degenerate interconversion of the Zr-C_cp-CH₂-CH₂-N(CH₃)₂-(Zr) pseudo-five-member metallacycle) have been studied by the variable-temperature ¹H and ¹³C{¹H} NMR spectroscopy. The activation parameters for the degenerate five-member cycle interconversion have been elucidated.     

Enantioselective synthesis of axially chiral 1-(1-naphthyl)isoquinolines and 2-(1-naphthyl)pyridines through sulfoxide ligand coupling reactions

Racemic 1-(1′-isoquinolinyl)-2-naphthalenemethanol rac-12 was prepared through a ligand coupling reaction of racemic 1-(tert-butylsulfinyl)isoquinoline rac-7 with the 1-naphthyl Grignard reagent 10. Resolution of rac-12 was achieved through chromatographic separation of the Noe-lactol derivatives 14 and 15, providing (R)-(−)-12 of >99% ee and (S)-(+)-12 of 90% ee. The ligand coupling reaction of optically enriched sulfoxide (S)-(−)-7 (62% ee) with Grignard reagent 10 furnished rac-12, with the absence of stereoinduction resulting from competing rapid racemisation of the sulfoxide 7. Reaction of optically enriched (S)-(−)-7 with 2-methoxy-1-naphthylmagnesium bromide was also accompanied by racemisation of the sulfoxide 7, and furnished optically active (+)-1-(2′-methoxy-1′-naphthyl)isoquinoline (+)-3b in low enantiomeric purity (14% ee). The absolute configuration of (+)-3b was assigned as R using circular dichroism spectroscopy, correcting an earlier assignment based on the Bijvoet method, but in the absence of heavy atoms. Optically active 2-pyridyl sulfoxides were found not to undergo racemisation analogous to the 1-isoquinolinyl sulfoxide 7, with the ligand coupling reactions of (R)-(+)- and (S)-(−)-2-[(4′-methylphenyl)sulfinyl]-3-methylpyridines, (R)-(+)-17 and (S)-(−)-17, with 2-methoxy-1-naphthylmagnesium bromide providing (−)- and (+)-2-(2′-methoxy-1′-naphthyl)-3-methylpyridines, (−)-18 and (+)-18, in 53 and 60% ee, respectively. The free energy barriers to internal rotation in 3b and 18 have been determined, and the isoquinoline (R)-(−)-12 examined as a ligand in the enantioselectively catalysed addition of diethylzinc to benzaldehyde; (R)-(−)-12 was also converted to (R)-(−)-N,N-dimethyl-1-(1′-isoquinolinyl)-2-naphthalenemethanamine (R)-(−)-19, and this examined as a ligand in the enantioselective Pd-catalysed allylic substitution of 1,3-diphenylprop-2-enyl acetate with dimethyl malonate.     

Synthesis and X-ray structures of new chiral Ag(I) complexes with biaryl-based N4-donor ligands

Condensation of (R)-2,2′-diamino-1,1′-binaphthyl or (R)-6,6′-dimethylbiphenyl-2,2′-diamine with 2 equiv of 2-pyridine carboxaldehyde in toluene in the presence of molecular sieves at 70 °C gives (R)-N,N′-bis(pyridin-2-ylmethylene)-1,1′-binaphthyl-2,2′-diimine (1), and (R)-N,N′-bis(pyridin-2-ylmethylene)-6,6′-dimethylbiphenyl-2,2′-diimine (3), respectively, in good yields. Reduction of 1 with an excess of NaBH₄ in a solvent mixture of MeOH and toluene (1:1) at 50 °C gives (R)-N,N′-bis(pyridin-2-ylmethyl)-1,1′-binaphthyl-2,2′-diamine (2) in 95% yield. Rigidity plays an important role in the formation of helicate silver(I) complexes. Treatment of 1, or 3 with 1 equiv of AgNO₃ in mixed solvents of MeOH and CH₂Cl₂ (1:4) gives the chiral, dinuclear double helicate Ag(I) complexes [Ag₂(1)₂][NO₃]₂ (4) and [Ag₂(3)₂][NO₃]₂ · 2H₂O (6), respectively, in good yields. While under the similar reaction conditions, reaction of 2 with 1 equiv of AgNO₃ affords the chiral, mononuclear single helicate Ag(I) complex [Ag(2)][NO₃] (5) in 90% yield. [Ag₂(1)₂][NO₃]₂ (4) can further react with excess AgNO₃ to give [Ag₂(1)₂]₃[NO₃]₂[Ag(CH₃OH)(NO₃)₃]₂ · 2CH₃OH (7) in 75% yield. All compounds have been fully characterized by various spectroscopic techniques and elemental analyses. Compounds 1 and 5-7 have been further subjected to single-crystal X-ray diffraction analyses.     

Synthesis of pyrido and pyrazinodithienodipyrimidine-4,8(3H,9H)-dione derivatives by the aza-Wittig methodology

A one-pot synthesis of the hitherto unreported pyrido[5″,6″:4,5;3″2″:4′,5′]dithieno[3,2-d:3′,2′-d′]dipyrimidine-4,8(3H,9H)-dione 6a-o and pyrazino[5″,6″:4,5;3″2″:4′,5′]dithieno[3,2-d:3′,2′-d′]dipyrimidine-4,8(3H,9H)-dione 6p-y pentaheterocyclic systems, based on the tandem aza-Wittig heterocumulene-mediated annulation strategy is described.     

The first bidentate phosphanylborohydride: Synthesis, structure, and reactivity towards [CpFe(CO)2I]

Deprotonation of the phosphane-borane adduct rac/meso-(HP(BH₃)(Ph)CH₂)₂ (2) with KH provides facile access to the bidentate phosphanylborohydride rac/meso-K₂[(P(BH₃)(Ph)CH₂)₂] (3). Treatment of 3 with two equivalents of [CpFe(CO)₂I] gives the dinuclear complex rac/meso-[(CpFe(CO)₂)₂-μ-(P(BH₃)(Ph)CH₂)₂] (4). Single crystals of the pure diastereomers meso-2, meso-3(thf)₄, and rac-4 have been grown from toluene/pentane, diethyl ether/thf, and benzene/pentane, respectively. The molecular structures of all three compounds have been determined by X-ray crystallography.     

Synthesis,structural analysis,and thermal and spectroscopic studies of methylmalonate-containing zinc(II) complexes

The synthesis, crystal structure, thermal analysis and spectroscopic studies of five zinc(II) complexes of formulae [Zn(Memal)(H₂O)]_n (1) and [Zn₂(L)(Memal)₂(H₂O)₂]_n (2-5) [H₂Memal = methylmalonic acid, and L = 4,4′-bipyridine (4,4′-bpy) (2), 1,2-bis(4-pyridyl)ethylene (bpe) (3), 1,2-bis(4-pyridyl)ethane (bpa) (4) and 4,4′-azobispyridine (azpy) (5)] are presented here. The crystal structure of 1 is a three-dimensional arrangement of zinc(II) cations interconnected by methylmalonate groups adopting the μ₃-κ²O:κO’:κO”:κO”’ coordination mode to afford a rare (10,3)-d utp-network. The structures of the compounds 2-5 are also three-dimensional and they consist of corrugated square layers of methylmalonate-bridged zinc(II) ions which are pillared by bis-monodentate 4,4′-bpy (2), bpe (3), bpa (4) and azpy (5) ligands. The Memal ligand in 2-5 adopts the μ₃-κO:κO′:κO′′:κO′′′ coordination mode. Each zinc(II) ion in 1-5 is six-coordinated with five (1)/four (2-5) methylmalonate-oxygen atoms, a water molecule (1-5) and a nitrogen atom from a L ligand (2-5) building distorted octahedral environments. The rod-like L co-ligands in 2-5 appear as useful tools to control the interlayer metal-metal separation, which covers the range 8.4311(5) Å (2) – 9.644(3) Å (5). The influence of the co-ligand on the fluorescence properties of this series of compounds has been analyzed and discussed by steady-state and time resolved spectroscopy on all five compounds in the solid state.     

Synthesis and crystal structure of three new copper(II) complexes with a tridentate amine and its Schiff bases

Three new mononuclear complexes of copper(II), viz. [Cu(L)(N₃)Cl] (1), [Cu(L′)(H₂O)]ClO₄ (2) and [Cu(L″)] (3) where L = N-(3-aminopropyl)-N-methylpropane-1,3-diamine, L′ = 2-(N-{3-[(3-aminopropyl)(methyl)amino]propyl}ethanimidoyl)phenolate ion and L″ = 2,2′-{(methylimino)bis[propane-3,1-diylnitrilo(1E)eth-1-yl-1-ylidene]}diphenolate ion, have been prepared. The synthesis of complex 1 has been achieved by reacting copper chloride with the triamine (L) and sodium azide in a 1:1:1 M ratio. The other two compounds have been synthesized by the reaction of copper perchlorate with the same triamine, L, plus 2-hydroxyacetophenone in a molar ratio of 1:1:1 (for 2) and 1:1:2 (for 3), so that the respective tetradentate and pentadentate Schiff bases HL′ and H₂L″ are formed in situ to bind the copper(II) ions. The complexes have been characterized by microanalytical, spectroscopic and single crystal X-ray diffraction studies. Structural studies reveal that the mononuclear units of all the three complexes adopt a distorted square pyramidal geometry and are held together by either intermolecular H-bonding (in 1 and 2) or C-H?π interactions (in 3) to form supramolecular networks in the solid state.     

X-ray crystal structures of novel platinum(II) and palladium(II) complexes of dialkyl phosphonated phosphines

Two diethyl phosphonated phosphine ligands of formula Ph₂P(CH₂)₃PO₃Et₂ (ligand L) and Ph₂P(4-C₆H₄PO₃Et₂) (ligand L′) were used to prepare different complexes of platinum(II) (1, cis-PtCl₂L₂; 2, trans-PtCl₂L₂·H₂O; 3A and 3B, cis- and trans-PtCl₂L′₂) and palladium(II) (4, [PdCl₂L]₂; 5, trans-PdCl₂L₂·H₂O; 6, trans-PdCl₂L′₂·CH₂Cl₂). The single-crystal X-ray structure analyses of complexes 1, 2, 4-6 indicate that complexation involved only the phosphine end, whereas the strong polarization of the PO bond was highlighted by the formation of hydrogen bonds with a water molecule in 2 and 5, and with a dichloromethane molecule in 6, with an exceptionally short CH?O hydrogen bond length (C?O separation 3.094(3) Å).     

Synthesis and characterisation of six Fe(II or III), Co(II) or Zr(IV) complexes containing the ligand [CH(SiMe2R)P(Ph)2NSiMe3] (R = Me, NEt2) and of [Co{N(SiMe3)C(Ph)C(H)P(Ph)2NSiMe3}2]

The C,N-(trimethylsilyliminodiphenylphosphoranyl)silylmethylmetal complexes [Fe(L)₂] (3), [Co(L)₂] (4), [ZrCl₃(L)]·0.83CH₂Cl₂ (5), [Fe(L)₃] (6), [Fe(L′)₂] (7) and [Co(L′)₂] (8) have been prepared from the lithium compound Li[CH(SiMe₂R)P(Ph)₂NSiMe₃] [1a, (R = Me) {≡ Li(L)}; 1b, (R = NEt₂) {≡ Li(L′)}] and the appropriate metal chloride (or for 7, FeCl₃). From Li[N(SiMe₃)C(Ph)C(H)P(Ph)₂NSiMe₃] [≡ Li(L″)] (2), prepared in situ from Li(L) (1a) and PhCN, and CoCl₂ there was obtained bis(3-trimethylsilylimino- diphenylphosphoranyl-2-phenyl-N-trimethylsilyl-1-azaallyl-N,N′)cobalt(II) (9). These crystalline complexes 3-9 were characterised by their mass spectra, microanalyses, high spin magnetic moments (not 5) and for 5 multinuclear NMR solution spectra. The X-ray structure of 3 showed it to be a pseudotetrahedral bis(chelate), the iron atom at the spiro junction.     

Controlled vinyl-addition-type polymerization of norbornene initiated by several cobalt complexes having substituted terpyridine ligands

A series of cobalt(II) complexes having terpyridine derivatives such as 2,2^′:6^′,2″-terpyridine (1), 4,4^′,4″-^tBu₃-2,2^′:6^′,2″-terpyridine (2), 5,5″-Me₂-2,2^′:6^′,2″-terpyridine (3), 6,6″-Me₂-2,2^′:6^′,2″-terpyridine (4) and 6,6″-(3,5-Me₂C₆H₃)₂-2,2^′:6^′,2″-terpyridine (5) was synthesized. The structures of 1, 3, and 4 were confirmed by X-ray crystallography. The coordination sphere around the cobalt center in 1 can be described as pseudo square pyramidal. On the other hand, complex 4 has pseudo trigonal bipyramidal structure. Upon activation with d-MAO (dried-methylaluminoxane), these complexes showed high activities for the polymerization of norbornene (NBE). In particular, polymerization of NBE with 4/d-MAO system at room temperature resulted in quantitative yield within several hours to give the polymers with relatively narrow molecular weight distributions and controlled molecular weight. The polymerizations of NBE with these cobalt catalyst systems proceeded in vinyl addition polymerization, which was confirmed by ¹H NMR spectra of the resulting polymers.     

Bridged bis(amidinate) lanthanide complexes: Synthesis,molecular structure and reactivity

The yttrium chloride with the bridged bis(amidinate) L (L = Me₃SiNC(Ph)N(CH₂)₃NC(Ph)NSiMe₃) LYCl(DME) (2) was synthesized and structurally characterized. Treatment of LLnCl(sol)_x (Ln = Yb, sol = THF, x = 2 1; Ln = Y, sol = DME, x = 1 2) with the dilithium salt Li₂L(THF)_0.5 afforded the novel bimetallic lanthanide complexes supported by three ligands, Ln₂(μ₂-L)₃ · DME (Ln = Yb 3, Y 4; DME = dimethylether), instead of the designed complex LLn(μ₂-L)LnL via the ligand redistribution reaction. Complexes 3 and 4 were fully characterized including X-ray analysis and ¹H NMR spectrum for 4. Reaction of LnCl₃ (Ln = Yb, Y) with 2 equiv. of Li₂L(THF)_0.5 gave the anionic complexes [Li(DME)₃][L₂Ln] (Ln = Yb 5, Y 6), which were confirmed by a crystal structure determination. The further study indicated that complexes 3 and 4 can also be synthesized by reaction of LnCl₃ (Ln = Yb, Y) with 1.5 equiv. of Li₂L(THF)_0.5 or reaction of 1 and 2 with anionic complexes 5 and 6. Complexes 3, 4, 5 and 6 were found to be high active catalysts for ring-opening polymerization of ε-caprolactone (CL).     

Stereochemistry of the insertion of disubstituted alkynes into the metal aminocarbyne bond in diiron complexes

Terminal alkynes (HCCR^′) (R^′=COOMe, CH₂OH) insert into the metal-carbyne bond of the diiron complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(NCMe)(Cp)₂][SO₃CF₃] (R=Xyl, 1a; CH₂Ph, 1b; Me, 1c; Xyl=2,6-Me₂C₆H₃), affording the corresponding μ-vinyliminium complexes [Fe₂{μ-σ:η³-C(R^′)CHCN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R=Xyl, R^′=COOMe, 2; R=CH₂Ph, R^′=COOMe, 3; R=Me, R^′=COOMe, 4; R=Xyl, R^′=CH₂OH, 5; R=Me, R^′=CH₂OH, 6). The insertion is regiospecific and C-C bond formation selectively occurs between the carbyne carbon and the CH moiety of the alkyne. Disubstituted alkynes (R^′CCR^′) also insert into the metal-carbyne bond leading to the formation of [Fe₂{μ-σ:η³-C(R^′)C(R^′)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R^′=Me, R=Xyl, 8; R^′=Et, R=Xyl, 9; R^′=COOMe, R=Xyl, 10; R^′=COOMe, R=CH₂Ph, 11; R^′=COOMe, R=Me, 12). Complexes 2, 3, 5, 8, 9 and 11, in which the iminium nitrogen is unsymmetrically substituted, give rise to E and/or Z isomers. When iminium substituents are Me and Xyl, the NMR and structural investigations (X-ray structure analysis of 2 and 8) indicate that complexes obtained from terminal alkynes preferentially adopt the E configuration, whereas those derived from internal alkynes are exclusively Z. In complexes 8 and 9, trans and cis isomers have been observed, by NMR spectroscopy, and the structures of trans-8 and cis-8 have been determined by X-ray diffraction studies. Trans to cis isomerization occurs upon heating in THF at reflux temperature. In contrast to the case of HCCR^′, the insertion of 2-hexyne is not regiospecific: both [Fe₂{μ-σ:η³-C(CH₂CH₂CH₃)C(Me)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R=Xyl, 13; R=Me, 15) and [Fe₂{μ-σ:η³-C(Me)C(CH₂CH₂CH₃)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R=Xyl, 14, R=Me, 16) are obtained and these compounds are present in solution as a mixture of cis and trans isomers, with predominance of the former.     

Iron(0) and ruthenium(0) complexes with tridentate phosphonite ligands and their potential for ketene formation from methyl iodide, CO and a base

An efficient route to the novel tridentate phosphine ligands RP[CH₂CH₂CH₂P(OR′)₂]₂ (I: R = Ph; R′ = i-Pr; II: R = Cy; R′ = i-Pr; III: R = Ph; R′ = Me and IV: R = Cy; R′ = Me) has been developed. The corresponding ruthenium and iron dicarbonyl complexes M(triphos)(CO)₂ (1: M = Ru; triphos = I; 2: M = Ru; triphos = II; 3: M = Ru; triphos = III; 4: M = Ru; triphos = IV; 5: M = Fe; triphos = I; 6: M = Fe; triphos = II; 7: M = Fe; triphos = III and 8: M = Fe; triphos = IV) have been prepared and fully characterized. The structures of 1, 3 and 5 have been established by X-ray diffraction studies. The oxidative addition of MeI to 1-8 produces a mixture of the corresponding isomeric octahedral cationic complexes mer,trans-(13a-20a) and mer,cis-[M(Me)(triphos)(CO)₂]I (13b-20b) (M = Ru, Fe; triphos = I-IV). The structures of 13a and 20a (as the tetraphenylborate salt (21)) have been verified by X-ray diffraction studies. The oxidative addition of other alkyl iodides (EtI, i-PrI and n-PrI) to 1-8 did not afford the corresponding alkyl metal complexes and rather the cationic octahedral iodo complexes mer,cis-[M(I)(triphos)(CO)₂]I (22-29) (M = Ru, Fe; triphos = I-IV) were produced. Complexes 22-29 could also be obtained by the addition of a stoichiometric amount of I₂ to 1-8. The structure of 22 has been verified by an X-ray diffraction study. Reaction of 13a/b-20a/b with CO afforded the acetyl complexes mer,trans-[M(COMe)(triphos)(CO)₂]I, 30-37, respectively (M = Ru, Fe; triphos = I-IV). The ruthenium acetyl complexes 30-33 reacted slowly with 2-tert-butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine (BEMP) even in boiling acetonitrile. Under the same conditions, the deprotonation reactions of the iron acetyl complexes 34-37 were completed within 24-40 h to afford the corresponding zero valent complexes 5-8. It was not possible to observe the intermediate ketene complexes. Tracing of the released ketene was attempted by deprotonation studies on the labelled species mer,trans-[Fe(COCD₃)(triphos)(CO)₂]I (38) and mer,trans-[Fe(¹³COMe)(triphos)(CO)₂]I (39).     

Mono- and bis-[2-(P,P-dimethylphosphanyl)ethyl]tetramethylcyclopentadienyl zirconium(IV) complexes: Synthesis and structural studies in crystalline state and in solutions

Synthetic routines for a new ligand C₅Me₄CH₂CH₂PMe₂ (2b) in forms of its Li- (2b-Li), Na- (2b-Na) salts and in the CH-form (2b-H), as well as for silanes Me₃Si-C₅H₄CH₂CH₂PMe₂ (3a) and Me₃Si-C₅Me₄CH₂CH₂PMe₂ (3b) have been developed. On the basis of it, new half-sandwich [η⁵:η¹-κP-C₅H₄CH₂CH₂PMe₂]ZrCl₃ (4a), [η⁵:η¹-κP-C₅Me₄CH₂CH₂PMe₂]ZrCl₃ (4b) and sandwich [η⁵-C₅Me₄CH₂CH₂PMe₂]₂ZrCl₂ (5), [η⁵-C₅Me₄CH₂CH₂PMe₂][η⁵-C₅Me₅]ZrCl₃ (6) complexes of Zr(IV) have been prepared and characterized. Along with them, the first example of X-ray structurally characterized dinuclear Zr(IV) complex incorporating both sandwich (6) and half-sandwich (4b) moieties linked one to another by means of Zr ← P coordination bond 7, has been described. Formation of an analogously organized trinuclear complex 8, built from one sandwich fragment of 5 and two half-sandwich fragments of 4b was proved by NMR spectroscopy methods. Molecular structures of half-sandwich complexes in their solvent-free dimeric forms (4a and 4b) and as 1:1 adducts with THF (4a-THF and 4b-THF) along with those of dinuclear complex 7 have been established by X-ray diffraction analyses. The dynamic behavior for di- and trinuclear complexes 7 and 8, due to the intermolecular dissociation-coordination of the Me₂P-groups in THF-d₈ solutions has been studied by variable-temperature NMR spectroscopy.     

Novel sandwich complexes of zirconium [C9H5(SiMe3)2](C5Me4R)ZrCl2 (R = CH3, CH2CH2NMe2): Synthesis and reduction behavior

Novel half-sandwich [C₉H₅(SiMe₃)₂]ZrCl₃ (3) and sandwich [C₉H₅(SiMe₃)₂](C₅Me₄R)ZrCl₂ (R = CH₃ (1), CH₂CH₂NMe₂ (2)) complexes were prepared and characterized. The reduction of 2 by Mg in THF lead to (η⁵-C₉H₅(SiMe₃)₂)[η⁵:η²(C,N)-C₅Me₄CH₂CH₂N(Me)CH₂]ZrH (7). The structure of 7 was proved by NMR spectroscopy data. Hydrolysis of 2 resulted in the binuclear complex ([C₅Me₄CH₂CH₂NMe₂]ZrCl₂)₂O (6). The crystal structures of 1 and 6 were established by X-ray diffraction analysis.     

Syntheses, structures and ligand conformations of Cu(II), Co(II) and Ag(I) complexes containing the phosphinic amide ligands

The syntheses, structures and ligand conformations of the complexes trans-Cu(L1)₂(ClO₄)₂, (L1 = N-(2-pyrimidinyl)-P,P-diphenyl-phosphinic amide), 1, [trans-Co(L1)₂(CH₃OH)₂](ClO₄)₂·O(C₂H₅)₂, 2, [trans-Co(L2)₂(H₂O)₂](ClO₄)₂·2CH₃OH, (L2 = N-(2-pyridinyl)-P,P-diphenyl-phosphinic amide), 3, [cis-Co(L2)₂(NO₃)](NO₃), 4, and [Ag(L3)(NO₃)(CH₃CN)]_∞, (L3 = N-(6-methyl-2-pyridinyl)-P,P-diphenyl-phosphinic amide), 5, are reported. The L1 and L2 ligands in the monomeric complexes 1-4 chelate the metal centers through the pyrimidyl/pyridyl nitrogen atoms and the phosphinic amide oxygen atoms, whereas the L3 ligands in complex 5 bridge the metal centers, forming a 1-D zigzag chain. The chelating L2 ligands in complexes 3 and 4 adopt cis conformations and the bridging L3 ligand in complex 5 adopts a trans conformation, respectively.     

Mononuclear ruthenium(II) complexes bearing the (S,S)-Pr-pybox ligand

The complexes trans-[RuCl₂(L){(S,S)-ⁱPr-pybox}] ((S,S)-ⁱPr-pybox = 2,6-bis[4′-(S)-isopropyloxazolin-2′-yl]pyridine, L = PMe₃ (1), P(OMe)₃ (2), PPh₂(CH₂CHCH₂) (3), CNBn (5), CNCy (6) and MeCN (7)) have been synthesized by substitution of ethylene on the precursor trans-[RuCl₂(η²-C₂H₄){(S,S)-ⁱPr-pybox}]. This complex also reacts with cyclooctadiene (cod) or norbornadiene (nbd) and NaPF₆, in refluxing methanol, giving the coordination compounds [RuCl(η⁴-cod){(S,S)-ⁱPr-pybox}][PF₆] (8) and [RuCl(η⁴-nbd){(S,S)-ⁱPr-pybox}][PF₆] (9). The structures of complexes [RuCl(CO)(PPh₃)(H-pybox)][BF₄] (H-pybox = 2,6-bis(dihydrooxazolin-2′-yl)pyridine) (4), 6 and 8, have been resolved by X-ray diffraction methods. The catalytic activity of the new complexes in transfer hydrogenation of acetophenone has also been examined.