Crystal growth, characterization and physical properties of PrNiSb3, NdNiSb3 and SmNiSb3

The crystal structures of three new intermetallic ternary compounds in the LnNiSb₃ (Ln=Pr, Nd and Sm) family have been characterized by single crystal X-ray diffraction. PrNiSb₃, NdNiSb₃ and SmNiSb₃ all crystallize in an orthorhombic space group, Pbcm (No. 57), Z=12, with , , , and ; , , , and ; and , , , and , for Ln=Pr, Nd and Sm, respectively. These compounds consist of rare-earth atoms located above and below layers of nearly square, buckled Sb nets, along with layers of highly distorted edge- and face-sharing NiSb₆ octahedra. Resistivity data indicate metallic behavior for all three compounds. Magnetization measurements show antiferromagnetic behavior with (PrNiSb₃), 4.6 K (NdNiSb₃), and 2.9 K (SmNiSb₃). Effective moments of 3.62 μ_B, 3.90 μ_B and 0.80 μ_B are found for PrNiSb₃, NdNiSb₃ and SmNiSb₃, respectively, and are consistent with Pr³⁺ (f ²), Nd³⁺ (f ³), and Sm³⁺ (f ⁴).     

Structural characterization and ferroelectric ordering in (C3N2H5)5Sb2Br11

A ferroelectric crystal (C₃N₂H₅)₅Sb₂Br₁₁ has been synthesized. The single crystal X-ray diffraction studies (at 300, 155, 138 and 121 K) show that it is built up of discrete corner-sharing bioctahedra and highly disordered imidazolium cations. The room temperature crystal structure has been determined as monoclinic, space group, P2₁/n with: , and and β=96.19^°. The crystal undergoes three solid-solid phase transitions: ) discontinuous, continuous and discontinuous. The dielectric and pyroelectric measurements allow us to characterize the low temperature phases III and IV as ferroelectric with the Curie point at 145 K and the saturated spontaneous polarization value of the order of along the a-axis (135 K). The ferroelectric phase transition mechanism at 145 K is due to the dynamics of imidazolium cations.     

Synthesis and crystal structure of a novel ternary oxoborate, PbBiBO4

A novel ternary borate oxide, lead bismuth boron tetraoxide, PbBiBO₄, has been prepared by solid-state reaction at temperature below 800 °C. The single-crystal X-ray structural analysis showed that PbBiBO₄ crystallizes in the monoclinic space group P2₁/n with , , , β=91.48(1), Z=4. It represents a new structure type in which distorted BiO₆⁹⁻ octahedra are connected to each other in corner- and edge-sharing manner to form two-dimensional layers that are bridged by B atoms of BO₃ triangles giving rise to a three-dimensional framework, with channels parallel to the [0 1 0] direction accommodating the pyramidally coordinated Pb²⁺ cations.     

Determination of chromium, cadmium and lead in food-packaging materials by axial inductively coupled plasma time-of-flight mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) with a time-of-flight (TOF) analyser was used for the determination of chromium, cadmium and lead in six food-packaging materials (paper and paper board). The samples (0.20-0.25 g) were digested in concentrated nitric acid in a high pressure microwave oven at 180 °C within 15 min. Two different plasma conditions were applied: cool plasma conditions (0.76 kW; 0.85, 0.89 and 15.5 l min⁻¹ nebuliser, auxiliary and plasma gas flow rate, respectively) for the determination of chromium and normal plasma conditions (1.21 kW; 0.66, 0.68 and 13.6 l min⁻¹ nebuliser, auxiliary and plasma gas flow rate, respectively) for the determination of cadmium and lead. External calibration was used in combination with rhodium (40 ng g⁻¹) as an internal standard. The detection limits (DL = 3S.D./sensitivity) under the conditions used corresponded to 0.01 ng g⁻¹ (), 0.06 ng g⁻¹ (), 0.07 ng g⁻¹ (), 0.03 ng g⁻¹ () and 0.02 ng g⁻¹ ( and ). The precision (R.S.D.) for six replicate determinations (10 s integration time) of 1 and 10 ng g⁻¹ of each analyte varied from 0.72% () to 4.43% (). The contents of chromium, cadmium and lead in the examined materials were evaluated using the signals of , and . They were in the range: 0.25-0.50 μg g⁻¹ for Cr, not detected (nd) to 0.12 μg g⁻¹ for Cd and 0.28-0.35 μg g⁻¹ for Pb in paper and 0.50-0.64 μg g⁻¹ for Cr, nd to 0.09 μg g⁻¹ for Cd and 0.67-0.99 μg g⁻¹ for Pb in paper board.     

Syntheses of [F]5-fluoro-3-nitro-l-tyrosine

The detection of 3-nitro-l-tyrosine has been used as a biomarker of “reactive nitrogen species” in biological matrices and has been an ongoing challenge in analytical chemistry. In this work, fluorine-18 labelled 5-fluoro-3-nitro-l-tyrosine (FNT) was synthesized as a potential radiotracer to probe the biological fate of 3-nitro-l-tyrosine. The synthesis of []FNT was carried out by reaction of []3-fluoro-l-tyrosine with NaNO₃ in TFA solvent for 5 min at 4 °C. The radiochemical yield (RCY) of []FNT was 96±2% and []3-fluoro-l-tyrosine, was 29±1%, relative to []3-fluoro-l-tyrosine and []F₂, respectively. The syntheses of []FNT were also accomplished by direct fluorination of 3-nitro-l-tyrosine with []F₂ and by nitration of l-tyrosine with NaNO₃, followed by fluorination, in TFA (4 °C) or anhydrous HF (−65 °C) solvent. The latter two synthetic routes produced []FNT in 13.5±1.5% RCY, within 1 h. Products were characterized by use of , and NMR spectroscopy and mass spectrometry.     

Determination of arsenic, iron and selenium in moss samples using hexapole collision cell, inductively coupled plasma-mass spectrometry

Different collision gases (H₂, He and premixed 7% H₂ in He) used in the hexapole collision cell of an inductively coupled plasma-mass spectrometer (ICP-MS) were compared, and the gas-flow rates were optimized for the determination of arsenic (), iron () and selenium (). The study showed that the argon-based interferences at mass-to-charge ratios (m/z) of 56, 75 and 80 can be overcome by the optimized gas flows (7.5 ml min⁻¹ premixed 7% H₂ in He and 2 ml min⁻¹ H₂) in the hexapole collision cell. Detection limits of 15.5 ng l⁻¹ for iron () and 29 ng l⁻¹ for selenium () in 2% (v/v) HNO₃ were obtained under optimized collision cell conditions. The detection limit for arsenic () obtained in difficult hydrochloride acid matrix (5% HCl (v/v)) was 153 ng l⁻¹. The accuracy of the optimized method was confirmed by analyzing two moss reference materials. The results obtained by ICP-MS for arsenic, selenium and iron from both moss reference samples were, in most cases, in good agreement with the certified values.     

Synthesis, structure, band gap, and electronic structure of CsAgSb4S7

The compound CsAgSb₄S₇ has been synthesized by the reaction of the elements in a Cs₂S₃ flux at 773 K. The compound crystallizes in a new structure type with eight formula units in space group C2/c of the monoclinic system in a cell at 153 K of dimensions , , , β=97.650(1)°, and . The structure contains two-dimensional layers separated by Cs atoms. Each layer is built from edge-sharing one-dimensional and chains. Each Ag atom is tetrahedrally coordinated to four S atoms. Each Sb³⁺ center is pyramidally coordinated to three S atoms to form an SbS₃ group. CsAgSb₄S₇ is insulating with an optical band gap of 2.04 eV. Extended Hückel calculations indicate that the band gap in CsAgSb₄S₇ is dominated by the Sb 5s and S 3p states above and below the Fermi level.     

Structural and conductivity studies of CsKSO4Te(OH)6 and Rb1.25K0.75SO4Te(OH)6 materials

The crystal structures of the title compounds were solved using the single-crystal X-ray diffraction technique. At room temperature CsKSO₄Te(OH)₆ was found to crystallize in the monoclinic system with Pn space group and lattice parameters: ; ; ; β=106.53(2)°; ; Z=4 and . The structural refinement has led to a reliability factor of R₁=0.0284 (wR₂=0.064) for 7577 independent reflections. Rb_1.25K_0.75SO₄Te(OH)₆ material possesses a monoclinic structure with space group P2₁/a and cell parameters: ; ; ; β=106.860(10)°; ; Z=4 and . The residuals are R₁=0.0297 and wR₂=0.0776 for 3336 independent reflections. The main interest of these structures is the presence of two different and independent anionic groups (TeO₆⁶⁻ and SO₄²⁻) in the same crystal.Complex impedance measurements (Z^*=Z^′—iZ^″) have been undertaken in the frequency and temperature ranges 20-10⁶ Hz and 400-600 K, respectively. The dielectric relaxation is studied in the complex modulus formalism M^*.     

Ruthenium (II) complexes of the chelating phosphine borane H2ClB · dppm

Reaction of H₂ClB · PPh₂CH₂PPh₂ (H₂ClB · dppm) with results in displacement of all three acetonitrile ligands and the formation of (1), which has been characterised crystallographically. Reaction with carbon monoxide results in a change from η² to η¹ of the borane ligand to afford (2). Compound 1 undergoes H/D exchange under a D₂ atmosphere to afford , while 2 does not.     

Hetero dimer from tetrakisammonium cavitand and tetratopic crown ether cavitand

Hetero dimer between tetrakis(m-ammonium)cavitand and tetrakis(dibenzo-25-crown-8)cavitand 5 was formed in CDCl₃ at room temperature. The effects of solvent polarity and temperature on the stability of were studied and the thermodynamic parameters for the formation of are , ΔH⁰ = −67.4 kcal mol⁻¹ and ΔS⁰ = −201.6 cal mol⁻¹ K⁻¹.     

Syntheses, crystal and electronic structure, and some optical and transport properties of LnCuOTe (Ln=La, Ce, Nd)

Three new compounds, LaCuOTe, CeCuOTe, and NdCuOTe, have been synthesized from the respective rare-earth elements, CuO, and a KI flux at 1023 K. The compounds, which have the ZrSiCuAs structure type, are isostructural to LaCuOS, and crystallize in space group P4/nmm of the tetragonal system with two formula units in cells of dimensions at 153 K of , , for LaCuOTe; , , for CeCuOTe; and , , for NdCuOTe. The structure of LnCuOTe (Ln=La, Ce, Nd) is composed of alternating PbO-like [Ln₂O₂] and anti-PbO-like [Cu₂Te₂] layers stacked perpendicular to [0 0 1]. The experimental optical band gaps of LaCuOTe and NdCuOTe are 2.31 and 2.26 eV, respectively. At 298 K the electrical conductivity of LaCuOTe is 1.65 S/cm and the Hall mobility is +80.6 cm² V⁻¹ s⁻¹. The positive values of the Seebeck and Hall coefficients indicate p-type electrical conduction. First-principles theoretical calculations were performed on LaCuOQ (Q=S, Se, Te). In LaCuOTe, Cu 3d and Te 5p orbitals dominate the states near the valence band maximum; the states near the conduction band minimum are composed of Cu 4s, Te 5p, and La 5d orbitals. The larger dispersion of Cu 3d orbitals and the presence of Te 5p orbitals near the valence band maximum are responsible for the larger hole mobility of LaCuOTe compared to LaCuOS and LaCuOSe.     

The disordered structures and low temperature dielectric relaxation properties of two misplaced-displacive cubic pyrochlores found in the Bi2O3-MO-Nb2O5 (M=Mg, Ni) systems

The disordered structures and low temperature dielectric relaxation properties of Bi_1.667Mg_0.70Nb_1.52O₇ (BMN) and Bi_1.67Ni_0.75Nb_1.50O₇ (BNN) misplaced-displacive cubic pyrochlores found in the Bi₂O₃-M^IIO-Nb₂O₅ (M=Mg, Ni) systems are reported. As for other recently reported Bi-pyrochlores, the metal ion vacancies are found to be confined to the pyrochlore A site. The B₂O₆ octahedral sub-structure is found to be fully occupied and well-ordered. Considerable displacive disorder, however, is found associated with the O′A₂ tetrahedral sub-structure in both cases. The A-site ions were displaced from Wyckoff position 16d (, , ) to 96 h (, , ) while the O′ oxygen was shifted from position 8b (, , ) to Wyckoff position 32e (, , ). The refined displacement magnitudes off the 16d and 8b sites for the A and O′ sites were 0.408 Å/0.423 Å and 0.350 Å/0.369 Å for BMN/BNN, respectively.     

Comparison of methods for the determination of total selenium in plasma by magnetic sector inductively coupled plasma mass spectrometry

Three sample preparation methods (dilution, microwave digestion and ethanol addition) were evaluated for the determination of Se in human plasma using magnetic sector inductively coupled plasma mass spectrometry (ICP-MS). A number of instrumental parameters were also considered, namely the choice of internal standard (Sc, Rh, In) and pre-defined spectral resolution (m/Δm ∼300 (low resolution, LR) and ∼7500 (high resolution, HR)). The isotopes and were selected for analysis avoiding the major and unresolvable Ar dimer interferences associated with other Se isotopes.Ethanol addition was found to be the most suitable and reliable sample preparation method. The optimum ethanol concentration for a 1+9 dilution of the plasma sample was 0.5% (v/v). Indium or Sc were selected over Rh as internal standards as Seronorm™ Level 1 target values were achieved at lower concentrations of ethanol modifier. Representative ICP-MS detection limits for this method using (HR) and (HR), were 0.1 and 0.2 μg l⁻¹.Accurate analysis of Se in Seronorm™ Level 1 (MI0181) was found using either or and HR (86±5 and 83±5 μg l⁻¹ respectively, n=5, In internal standard, target value=83±6 μg l⁻¹). Although offering improved precision (e.g. LR: 0-3% versus HR: 1-6%), accurate results were only obtained with LR for the Seronorm™ Level 1 sample when using (86±1 μg l⁻¹). The major interference precluded accurate Se analysis using and LR for all samples considered. Reliable Se concentrations were only found for a “real” pooled sample when using (HR), in part a result of non-negligible and unresolved interference when using LR. Consistently elevated Se concentrations were found under all conditions when Seronorm™ Level 2 (NO0371) was analysed. These results were confirmed by independent GF-AAS analysis.Magnetic sector ICP-MS with (HR), in combination with the ethanol addition sample preparation method, was used for the analysis of Se in human plasma samples as part of a small pilot study. Average measured selenium concentrations were 102±18 μg l⁻¹ (n=18).     

Syntheses, structures, and magnetic properties of the europium(II) selenido pnictogenates(III), EuPnSe3 (Pn=Sb, Bi)

EuPnSe₃ (Pn=Sb, Bi) have been synthesized through the reaction of Eu with Pn₂Se₃ (Pn=Sb, Bi) and Se at 850-900 °C. These compounds are isotypic with SrPnSe₃ (Pn=Sb, Bi) and consist of square pyramidal PnSe₅ units and distorted PnSe₆ octahedra that form hollow columns that extend along the c-axis. These columns are separated by Eu²⁺ cations that occur as nine-coordinate tricapped trigonal prisms. There are also additional V-shaped triselenide Se₃²⁻ anions between the columns that bind the Eu²⁺ cations. The Se?Se contacts (in EuSbSe₃) in these units are 2.4584(11) and 2.4359(11) Å, which are consistent with Se-Se single bonds. The overall structure is chiral. Bond-valence sum calculations indicate that these compounds contain Eu²⁺. Magnetic susceptibility measurements provide values of 7.66 μ_B/Eu for EuSbSe₃ and 7.64 μ_B/Eu for EuBiSe₃, which are close to the expected free-ion moment for Eu²⁺. These compounds follow essentially Curie behavior from 300 to 5 K, and undergo an apparently antiferromagnetic transition below 5 K. Crystallographic data: EuSbSe₃, orthorhombic, space group P2₁2₁2₁, , , , , Z=16, R(F)=2.63% for 183 parameters and 5095 reflections with I>2σ(I); EuBiSe₃, orthorhombic, space group P2₁2₁2₁, , , , , Z=16, R(F)=2.68% for 183 parameters and 4895 reflections with I>2σ(I).