Palladium and platinum complexes of chiral and achiral calix[4]arene bisphosphite ligands

Chiral and achiral p-tert-butyl-calix[4]arene bisphosphites (L¹–L³) have been synthesized by the reaction of p-tert-butyl-calix[4]arene and the phosphorodichloridites, ROPCl₂ [R = (1S,2R,5R)-(+)-iso-menthyl (L¹), (1R,2S,5R)-(−)-menthyl (L²) or C₆H₄Bu^t-4 (L³)]. These bisphosphites function as chelating ligands in palladium(II) and platinum(II) complexes which are formed in good yields by the reaction of PdCl₂(PhCN)₂, MCl₂(COD) (M = Pd or Pt) or PdMeCl(COD) with the respective calix[4]arene bisphosphite. Single crystal X-ray diffraction studies performed on the complexes [PdCl₂(L¹)], [PdCl₂(L²)], [PdCl₂(L³)] and [PtCl₂(L³)] reveal a near square planar geometry around the metal with the two chloride ligands in a cis disposition. The crystal packing in the complexes [PdCl₂(L¹)] and [PdCl₂(L²)], which crystallize in the chiral (P6₁22) space group, shows different hydrophobic channels with intermolecular C–H?Cl hydrogen bonding. The complexes [PdCl₂(L³)] and [PtCl₂(L³)] are isostructural and the molecules in the crystal lattice are linked by intermolecular C–H?Cl and C–H?O hydrogen bonds.     

Structural studies of phosphor-1,1-diselenoato Mn(I) and Re(I) complexes

Mononuclear complexes of the type, M(CO)₄[Se₂P(OR)₂] (M = Mn, R = ⁱPr, 1a; Et, 1b; M = Re, R = ⁱPr, 3a; Et, 3b) can be prepared from either [-Se(Se)P(OⁱPr)₂]₂ (A) or [Se{-Se(Se)P(OEt)₂}₂] (B) with M(CO)₅Br. O,O′-dialkyl diselenophosphate ([(RO)₂PSe₂]^-, abbreviated as dsep) ligands generated from A and B act as a chelating ligand in these complexes. Upon refluxing in acetonitrile, these mononuclear complexes yield dinuclear complexes with a general formula of [M₂(CO)₆{Se₂P(OR)₂}₂] (M = Mn, R = ⁱPr, 2a; Et, 2b; M = Re, R = ⁱPr, 4a; Et, 4b). Dsep ligands display a triconnective, bimetallic bonding mode in the dinuclear compounds and this kind of connective pattern has never been identified in any phosphor-1,1-diselenoato metal complexes. Compounds 2b, 3b, and 4 are structurally characterized. Compounds 2b and 3b display weak, secondary Se?Se interactions in their lattices.     

Reactions of benzyldiphenylphosphine with Pd(II) sources on silica gel

Depending on the conditions used, reactions of benzyldiphenylphosphine (HL¹) with Na₂PdCl₄ on silica gel or with Pd(OAc)₂ on the same absorbent followed by treatment with LiCl provide one or more of the four compounds: the cyclopalladated binuclear complex [(μ-Cl)PdL¹]₂ (1), cis and trans isomers of the coordination complex PdCl₂(HL¹)₂ (3), the binuclear coordination complex [(μ-Cl)PdCl(HL¹)]₂ (4), and compound PdCl₂(HL¹)₃ (5). The 56% yield of complex 1 achieved using the reaction with Na₂PdCl₄ and NaOAc on SiO₂ is higher than that reported for the direct cyclopalladation of PBnPh₂ with Pd(OAc)₂ in AcOH. X-ray diffraction studies of the cyclopalladated dimer 1 and the coordination complex cis-3 are reported.     

Synthesis and characterization of 2,7-dihydro-1H-dinaphtho[c,e]tellurepin: a new heterocyclic telluride

Synthesis of the racemic cyclic telluride, i.e., 2,7-dihydro-1H-dinaphtho-[c,e]tellurepin (1), possessing a C₂ axis was based on the reaction of 2,2^′-bis(bromomethyl)-1,1^′-binaphthalene with potassium tellurocyanate in dry DMSO. Reaction of halogens with 1 gave the diiodo (2), dibromo (3) and dichloro (4) derivatives. Treatment of 1 with iodomethane and iodoethane gave the methyl- and ethyl tellurepinium iodides, 5 and 6, respectively.Compound 1 reduced the carbonyl groups in DDQ and TCQ to hydroxyl groups. Mononuclear palladium(II) complex, [(C₂₂H₁₆Te)₂PdCl₂], was prepared by reaction of 1 with [PdCl₂(NCPh)₂].All new compounds were characterized by elemental analysis and spectroscopic techniques.     

Novel Ag(I), Pd(II), Ni(II) complexes of N,N′-bis-(2,2-diethoxyethyl)imidazole-2-ylidene: Synthesis, structures, and their catalytic activity towards Heck reaction

Tetra-ether substituted imidazolium salts, LHX (where LH = N,N′-bis(2,2-diethoxyethyl)imidazolium cation and X = Br, BF₄, PF₆, BPh₄, NO₃ and NTf₂ anions) were derived from imidazole. Attempts to produce aldehyde functionalized imidazolium salt through acid hydrolysis of LHBr resulted an unexpected tetra-hydroxy compound L_AHBr and the dialdehyde compound L_BHBr. Reaction of LHBr with Ag₂O afforded [L₂Ag][AgBr₂] (1). Mononuclear Pd-complex trans-[L₂PdCl₂] (2) and dinuclear Pd-complex [(LPdCl₂)₂] (3) were obtained by 1:1 and 1:2 reaction of in situ generated Ag-carbene with Pd(CH₃CN)₂Cl₂. cis-[LPdPPh₃Cl₂] (4) was synthesized from reaction of PPh₃ with dinuclear complex 3. Hydrolysis of 3 under acidic conditions also generates a hydroxy derivative 3A and the aldehyde derivative 3B. Direct heating of LHBr with Ni(OAc)₂ · 4H₂O at 120 °C under vacuum generated trans-[L₂NiBr₂] (5). These complexes were characterized by NMR, mass, elemental analysis, and X-ray single crystal diffraction analysis. Pd--Pd interaction was observed in 3. All the Pd complexes exhibited excellent catalytic activity in Heck reaction.     

Synthesis and crystal structure of four Pd(II) complexes containing nido or closo carborane diphosphine ligands

Three Pd(II) complexes [Pd₂(μ-Cl)₂{7,8-(PPh₂)₂-7,8-C₂B₉H₁₀}₂] · 0.25CH₂Cl₂ (1), [Pd{7,8-(PPh₂)₂-7,8-C₂B₉H₁₀}₂] · 4CHCl₃ (2) and [PdCl₂(1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀)] (3) have been synthesized by the reactions of 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀ with PdCl₂ in acetonitrile, cyanophenyl and dichloromethane, respectively. A fourth complex, [PdI₂(1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀)] (4), was obtained by a ligand exchange reaction through the substitution of the Cl⁻ of complex 3 with I⁻. All four complexes have been characterized by elemental analysis, FT-IR, ¹H and ¹³C NMR spectroscopy and X-ray structure determination. Single crystal X-ray determination showed that the carborane cage, nido for 1, 2 and closo for 3, 4, was coordinated bidentately to the Pd atom through the two P atoms, and the geometry at the Pd atom was square-planar in all the complexes.     

Ternary complex formation of copper(II) with 5-fluorosalicylate and 3-pyridylmethanol in aqueous solutions and solid state

The [CuA₂B₂] complex (A = 5-fluorosalicylate, B = 3-pyridylmethanol) – has been crystallized from the solutions with different initial component concentration ratios. For the first time a 1-D chain polymeric structure is described for such a system. The A ligand is coordinated through its carboxylate-oxygen in a monodentate manner, while B is forming ligand bridges between the copper(II) centers. The latter ligand binds with the non-deprotonated alcoholic OH to one and with the pyridyl-nitrogen to the other metal ion. Being a complex with potential biological activity it is of interest to study the ternary complex formation between copper(II), A and B in aqueous solution. Combined pH-potentiometric and spectrophotometric titrations were performed to obtain the composition and stabilities of the complexes. The formation of different ternary complexes was demonstrated both by the pH and absorbance effects. The [CuA₂B₂] complex dominates around pH 5 with the coordination of the carboxylic oxygens of two A ligands and pyridyl nitrogens of two B ligands. With increasing pH first the deprotonation of the phenolic-OH between pH 6 and 7 occurred leading to [CuH₋₁AB₂] complex. In alkaline pH range the formation of a mixed hydroxido species of composition [CuH₋₂AB]⁻ was proposed.     

[(η-C6H6)Ru(L)(Cl/N3/CN/CH3CN)] complexes of non-planar pyrazolylmethylpyridine ligands: Formation of helices due to C-H?X (X = Cl, N) interaction

Structural analysis of a previously reported half-sandwich complex having three-legged “piano-stool” geometry [(η⁶-C₆H₆)Ru^II(L¹)Cl][PF₆] (1) (L¹ = 2-(pyrazol-1-ylmethyl)pyridine) is described. Treatment of 1 with (i) Ag(CF₃SO₃) in CH₃CN and (ii) NaN₃ in CH₃OH, and (iii) the reaction between [(η⁶-C₆H₆)Ru(L²)Cl]-[PF₆] (2) (previously reported) and NaCN in C₂H₅OH led to the isolation of [(η⁶-C₆H₆)Ru(L¹)(CH₃CN)][PF₆]₂ (3), [(η⁶-C₆H₆)Ru(L¹)(N₃)][PF₆] (4), and [(η⁶-C₆H₆)Ru(L²)(CN)][PF₆] (5), respectively (L² = 2-(3,5-dimethyl-pyrazol-1-ylmethyl)pyridine). The complex [(η⁶-C₆H₆)Ru(L⁴)Cl][PF₆] (6) with a new ligand (L⁴ = 2-[3-(4-fluorophenyl)pyrazol-1-ylmethyl]pyridine) has also been synthesized. The structures of 3-6 have been elucidated (¹H NMR spectra; CD₃CN). The molecular structures of 1, 4, and 6·C₆H₅CH₃ have been determined. Notably, the crystal-packing in these structures is governed by C-H?X (X = Cl, N) interactions, generating helical architectures.     

Synthesis,structure and thermal properties of polynuclear complexes with a new multidentate ligand, N,N′-bis(5-ethyl-1,3,4-thiadiazol-2-yl)-2,6-pyridinedicarboxamide

Based on N,N′-bis(5-ethyl-1,3,4-thiadiazol-2-yl)-2,6-pyridinedicarboxamide (H₂L) and inorganic Zn^II and Cd^II salts, three polynuclear complexes [Zn₆(μ₄-O)₂(L)₄] (1), [Zn₃(μ₃-O)₂(L)₂(H₂L)] (2) and [Cd₅(μ₃-O)₂(L)₃(H₂L)(CH₃OH)(DMF)] (3) have been prepared and their crystal structures have been determined by single-crystal X-ray analysis. The thermal behaviors of these complexes in nitrogen and the thermal decomposition kinetics of complex 2 in the temperature range 350–540 °C have been studied, and kinetic parameters were also obtained. Kinetic results show that the decomposition of complex 2 is double-step reaction: a 1st-order reaction (F1) is followed by an nth-order reaction (Fn).     

Synthesis and structural characterization of 1′-(diphenylphosphino)ferrocene-1-carboxamide, its corresponding hydrazide, some heterocycles derived from the hydrazide and palladium(II) complexes with these functional phosphinoferrocene ligands

Two polar phosphinoferrocene ligands, 1′-(diphenylphosphino)ferrocene-1-carboxamide (1) and 1′-(diphenylphosphino)ferrocene-1-carbohydrazide (2), were synthesized in good yields from 1′-(diphenylphosphino)ferrocene-1-carboxylic acid (Hdpf) via the reactive benzotriazole derivative, 1-[1′-(diphenylphosphino)ferrocene-1-carbonyl]-1H-1,2,3-benzotriazole (3). Alternatively, the hydrazide was prepared by the conventional reaction of methyl 1′-(diphenylphosphino)ferrocene-1-carboxylate with hydrazine hydrate, and was further converted via standard condensation reactions to three phosphinoferrocene heterocycles, viz 2-[1′-(diphenylphosphino)ferrocen-1-yl]-1,3,4-oxadiazole (4), 1-[1′-(diphenylphosphino)ferrocen-1-carbonyl]-3,5-dimethyl-1,2-pyrazole (5), and 1-[1′-(diphenylphosphino)ferrocene-1-carboxamido]-3,5-dimethylpyrrole (6). Compounds 1 and 2 react with [PdCl₂(cod)] (cod = η²:η²-cycloocta-1,5-diene) to afford the respective bis-phosphine complexes trans-[PdCl₂(L-κP)₂] (7, L = 1; 8, L = 2). The dimeric precursor [(L^NC)PdCl]₂ (L^NC = 2-[(dimethylamino-κN)methyl]phenyl-κC¹) is cleaved with 1 to give the neutral phosphine complex [(L^NC)PdCl(1-κP)] (9), which is readily transformed into a ionic bis-chelate complex [(L^NC)PdCl(1-κ²O,P)][SbF₆] (10) upon removal of the chloride ligand with Ag[SbF₆]. Pyrazole 5 behaves similarly affording the related complexes [(L^NC)PdCl(5-κP)] (12) and [(L^NC)PdCl(5-κ²O,P)][SbF₆] (13), in which the ferrocene ligand coordinates as a simple phosphine and an O,P-chelate respectively, while oxadiazole 4 affords the phosphine complex [(L^NC)PdCl(4-κP)] (11) and a P,N-chelate [(L^NC)PdCl(4-κ²N³,P)][SbF₆] (14) under similar conditions. All compounds were characterized by elemental analysis and spectroscopic methods (multinuclear NMR, IR and MS). The solid-state structures of 1⋅½AcOEt, 2, 7⋅3CH₃CN, 8⋅2CHCl₃, 9⋅½CH₂Cl₂⋅0.375C₆H₁₄, 10, and 14 were determined by single-crystal X-ray crystallography.     

Conformational study of lanthanide(III) complexes of N-(2-salicylaldiminatobenzyl)-1-aza-18-crown-6 by using X-ray and ab initio methods

A structural study of lanthanide complexes with the deprotonated form of the monobracchial lariat ether N-2-salicylaldiminatobenzyl-aza-18-crown-6 (L⁴) (Ln = La(III)–Tb(III)) is presented. Attempts to isolate complexes of the heaviest members of the lanthanide series were unsuccessful. The X-ray crystal structures of [Pr(L⁴)(H₂O)](ClO₄)₂ · H₂O · C₃H₈O and [Sm(L⁴)(H₂O)](ClO₄)₂ · C₃H₈O show the metal ion being bound to the eight donor atoms of the ligand backbone. Coordination number nine is completed by the oxygen atom of an inner-sphere water molecule. Two different conformations of the crown moiety (labelled as A and B) are observed in the solid state structure of the Pr(III) complex, while for the Sm(III) complex only conformation A is observed. The complexes were also characterized by means of theoretical calculations performed in vacuo at the HF level, by using the 3-21G^∗ basis set for the ligand atoms and a 46 + 4fⁿ effective core potential for lanthanides. The optimized geometries of the Pr(III) and Sm(III) complexes show an excellent agreement with the experimental structures obtained from X-ray diffraction studies. The calculated relative energies of the A and B conformations for the different [Ln(L⁴)(H₂O)]²⁺ complexes (Ln = La, Pr, Sm, Ho or Lu) indicate a progressive stabilization of the A conformation with respect to the B one upon decreasing the ionic radius of the Ln(III) ion. For the [Ln(L⁴)(H₂O)]²⁺ systems, most of the calculated bond distances between the metal ion and the coordinated donor atoms decrease along the lanthanide series, as usually observed for Ln(III) complexes. However, our ab initio calculations provide geometries in which the Ln–O(5) bond distance [O(5) is an oxygen atom of the crown moiety] increases across the lanthanide series from Sm(III) to Lu(III).     

Synthesis and characterization of some novel cadmium(II) complexes with 3-hydroxypicolinic acid (3-OHpicH): Crystal and molecular structures of [CdI(3-OHpic)(3-OHpicH)(H2O)]2, [Cd(3-OHpic)2(H2O)2] and [Cd(3-OHpic)2]n

Cadmium(II) complexes of 3-hydroxypicolinic acid, namely [CdI(3-OHpic)(3-OHpicH)(H₂O)]₂ (1), [Cd(3-OHpic)₂(H₂O)₂] (2) and [Cd(3-OHpic)₂]_n (3) were prepared and characterized by spectroscopic methods (IR, NMR) and their molecular and crystal structures were determined by X-ray crystal structure analysis. Complexes 1 and 2 were prepared in similar reaction conditions using different cadmium(II) salts: cadmium(II) iodide and cadmium(II) acetate dihydrate, respectively, while 3 was prepared by recrystallization of 2 from N,N-dimethylformamide solution. Various coordination modes of 3-OHpicH in 1–3 were established in the solid state: bidentate N,O-chelated mode in 1 and 2, monodentate mode through the carboxylate O atom from zwitterionic ligand in 1 and bidentate N,O-chelated and bridging mode in 3. In the DMF solution of all prepared complexes, only monodentate mode of 3-OHpicH binding to cadmium(II) through the carboxylate O atom was established by ¹H, ¹³C, ¹⁵N and ¹¹³Cd NMR spectroscopy.     

The synthesis of palladacyclopentadienyl derivatives from rigid bis-alkynes and their use as precursors in the synthesis of fluoroanthene-like cycles under mild conditions. A reactivity investigation

The palladium(0) derivatives of the type [Pd(η²-ol)(LL′)] (2) (ol = dmfu: dimethylfumarate (a), fn: fumaronitrile (b), tmetc: tetramethylethylenetetracarboxylate (c), LL′ = HNSPh: 2-(phenylthiomethyl)-pyridine (A), BiPy: 2,2′-bipyridyl (B), DPPE: bis-diphenylphosphinoethane (C)) were reacted in CH₂Cl₂ with 1,8-bis(methylpropynoate)naphthalene (1) and 2,2′-bis(methylpropynoate)biphenyl (1′). At variance with the flexible 1′ derivative, the rigid bis-alkyne 1 reacts smoothly to give the corresponding cyclopalladate complexes [PdC₄(COOMe)₂(Ph)₂(LL′)] (3). The rates of reaction were determined and the X-ray diffraction structure of the complex [PdC₄(COOMe)₂(Ph)₂(HNSPh )] (3A) is reported. The reactivity of the complexes [PdC₄(COOMe)₂(Ph)₂(LL′)] (LL′ = HNSPh (3A), BiPy (3B), DPPE (3C)) was studied by reacting these complexes with fn and tetracyanoethylene (tcne), respectively. The ensuing fluoroanthene-like compounds were fully characterized.     

trans-Spanning ferrocene amidodiphosphine ligand: Synthesis, palladium complexes and catalytic use in Suzuki-Miyaura cross-coupling

Amide coupling between [2-(diphenylphosphino)phenyl]methylamine and 1′-(diphenylphosphino)ferrocene-1-carboxylic acid (Hdpf) afforded a novel diphosphine-amide, 1-{N-[(2-(diphenylphosphino)phenyl)methyl]carbamoyl}-1′-(diphenylphosphino)ferrocene (1), which was subsequently studied as a ligand for palladium(II) complexes. Depending on the metal precursor, the following complexes were isolated: [PdCl₂(1-κ²P,P′)] (2), [PdCl(Me)(1-κ²P,P′)] (3), [(μ-1){PdCl₂(PBu₃)}₂] (4) and [(μ-1){PdCl(L^NC)}₂] (L^NC = 2-[(dimethylamino-κN)methyl]phenyl-κC¹), featuring this ligand either as a trans-chelating or as a P,P′-bridging donor. The crystal structure of 2·1.25CH₂Cl₂ was established by X-ray crystallography, corroborating that 1 coordinates as a trans-spanning diphosphine without any significant distortion to the coordination sphere. Complex 2 together with a catalyst prepared in situ from 1 and palladium(II) acetate were tested in Suzuki-Miyaura reaction of aryl bromides with phenylboronic acid in dioxane.     

Synthesis and structure of halogen derivatives of 9-dimethylsulfonium-7,8-dicarba-nido-undecaborane [9-Me2S-7,8-C2B9H11]

Halogenation of 9-dimethylsulfonium-7,8-dicarba-nido-undecaborane [9-SMe₂-7,8-C₂B₉H₁₁] with N-chlorosuccinimide, bromine and iodine gave the expected corresponding halogen derivatives [9-SMe₂-11-X-7,8-C₂B₉H₁₀], where X = Cl (1), Br (2), I (3). In the bromination reaction, [9-SMe₂-6-Br-7,8-C₂B₉H₁₀] (4) was isolated as a minor product being the first example of substitution at a “lower” belt of the 7,8-dicarba-nido-undecaborate cage. The use of excess of bromine resulted in dibromo derivative [9-SMe₂-6,11-Br₂-7,8-C₂B₉H₉] (5). Structures of the compounds prepared were determined using ¹¹B-¹¹B COSY NMR spectroscopy (for all halogen derivatives) and single crystal X-ray diffraction (for compounds 2, 3, and 5).     

Novel preparation of ion-supported triphenylphosphines and their synthetic utility

Novel ion-supported Ph₃P compounds, 4-(diphenylphosphino)- benzyltrimethylammonium bromide (A) and N-methyl-N-[4-(diphenylphosphino) -benzyl]pyrrolidinium bromide (B), were prepared. Because of their stability in air, ion-supported Ph₃P A and B could be used for the halogenation of alcohols, the esterification of carboxylic acid with the Mitsunobu reaction, the Mizoroki-Heck reaction, and the Sonogashira reaction. The advantages of using these ion-supported Ph₃P A and B are the simple isolation of the products by ether extraction due to their poor solubility in ether, and the easy recovery of the co-product, ion-supported Ph₃PO, by filtration in high yields (>90%), which could be regenerated and reused for the same reactions, in the halogenation of alcohols and the esterification of carboxylic acid with the Mitsunobu reaction. On the other hand, ionic liquid reaction media containing Pd(OAc)₂ or PdCl₂ and ion-supported Ph₃P A or B as catalysts could be reused for the same Mizoroki-Heck reaction and the Sonogashira reaction maintaining high yields, using iodotoluene with methyl acrylate and phenylacetylene, respectively.     

Chemically modified oximato complexes of titanium(IV) isopropoxide as new precursors for the sol-gel preparation of nano-sized titania: Crystal and molecular structure of [Ti{ONC10H16}4·2CH2Cl2]

Reactions of [Ti(OPrⁱ)₄] with various oximes, in anhydrous refluxing benzene yielded complexes of the type [Ti{OPrⁱ}_4−n{L}_n], where, n = 1-4 and LH = (CH₃)₂CNOH (1-4), C₉H₁₆CNOH (5-8) and C₉H₁₈CNOH (9-12). The compounds were characterized by elemental analyses, molecular weight measurements, FAB-mass, FT-IR and NMR (¹H, ¹³C{¹H}) spectral studies. The FAB-mass spectra of mono- (1), and di- (2), (6), (10) substituted products indicate their dimeric nature and that of tri- (3) and tetra- (4), (8) substituted derivatives suggest their monomeric nature. Crystal and molecular structure of [Ti{ONC₁₀H₁₆}₄·2CH₂Cl₂] (8A) suggests that the oximato ligands bind the metal in a dihapto η²-(N, O) manner, leading to the formation of an eight coordinated species. Thermogravimetric curves of (3), (6) and (10) exhibit multi-step decomposition with the formation of TiO₂ as the final product in each case, at 900 °C. Low temperature (∼600 °C) sol-gel transformations of (2), (3), (4), (6), (7) and (8) yielded nano-sized titania (a), (b), (c), (d), (e) and (f), respectively. Formation of anatase phase in all the titania samples was confirmed by powder XRD patterns, FT-IR and Raman spectroscopy. SEM images of (a), (b), (c), (d), (e) and (f) exhibit formation of nano-grains with agglomer like surface morphologies. Compositions of all the titania samples were investigated by EDX analyses. The absorption spectra of the two representative samples, (a) and (f) indicate an energy band gap of 3.17 eV and 3.75 eV, respectively.     

Pheromone synthesis. Part 255: Synthesis and GC–MS analysis of pheromonal triacylglycerols of male Drosophila fruit flies

Pheromonal triacylglycerols and their analogs, 1A, 1B, 2A, 2B, 3A, 3B, and 3C, of male Drosophila fruit flies were synthesized and analyzed by GC–MS. Their GC retention times were found to be a reliable measure to analyze and identify these triacylglycerols with acetyl, oleoyl and tigloyl groups, although the stereo- and regioisomers of 1 (1A and 1B), 2 (2A and 2B), and 3 (3A, 3B, and 3C) could not be distinguished from each other by MS alone.     

Metal-organic coordination architectures of azole heterocycle ligands bearing acetic acid groups: Synthesis, structure and magnetic properties

Four new coordination complexes with azole heterocycle ligands bearing acetic acid groups, [Co(L¹)₂]_n (1), [CuL¹N₃]_n (2), [Cu(L²)₂·0.5C₂H₅OH·H₂O]_n (3) and [Co(L²)₂]_n (4) (here, HL¹=1H-imidazole-1-yl-acetic acid, HL²=1H-benzimidazole-1-yl-acetic acid) have been synthesized and structurally characterized. Single-crystal structure analysis shows that 3 and 4 are 2D complexes with 4⁴-sql topologies, while another 2D complex 1 has a (4³)₂(4⁶)-kgd topology. And 2 is a 3D complex composed dinuclear μ_1,1-bridging azido Cu^II entities with distorted rutile topology. The magnetic properties of 1 and 2 have been studied.