A study of shrinkage process of a polymer gel under electric field by 1H NMR imaging method using an NMR cell with thin platinum electrodes

An NMR cell with two pieces of thin platinum (Pt) negative and positive electrodes having a thickness of 0.02 mm was designed as set in an NMR imaging probe, in order to study the shrinkage process of a hydro-poly(methacrylic acid) (PMAA) gel in real time under the application of an electric field. By using the newly designed NMR cell, the three-dimensional images of the shrinking of ¹H spin density distribution of water in a PMAA gel on the application of a DC electric field were successfully observed in real time. From these results, the shrinkage process of the gel was analyzed.     

Characterization of poly(carboxylic acid)/poly(ethylene oxide) blends formed through hydrogen bonding by spectroscopic and calorimetric analyses

The solid state of the complex between poly(acrylic acid) (PAA) and poly(ethylene oxide) (PEO), and that between poly(methacrylic acid) (PMAA) and PEO formed via hydrogen-bonding was studied by differential-scanning calorimetric (DSC) and by Fourier-transform infrared (FT–IR) spectroscopic measurements. Melting temperature T_m and the degree of the crystallinity X_c of PEO in the systems PAA (or PMAA)/PEO blends obtained from aqueous or dimethyl sulfoxide (DMSO) medium were measured in various unit mol % of PEO ([PEO]100/{[PAA(or PMAA)] + [PEO]}) where [ ] is the unit mole concentration. It was found that 50 unit mol % of PEO is a critical composition, which gives new evidence for the 1 : 1 complex formation between PAA (or PMAA) and PEO. From the FT–IR spectroscopic analysis in conjunction with DSC measurements we also found that the effects of solvent and of hydrophobic interaction (due to the α-methyl group of PMAA) are the important factors controlling the complexation in the solution and solid systems. These factors also affect the crystallization behavior and the microstructure of the PAA (or PMAA)/PEO blend in solid state.     

Synthesis of monodisperse poly(methacrylic acid) microspheres by distillation-precipitation polymerization

Monodisperse poly(methacrylic acid) (PMAA) microspheres were prepared by distillation-precipitation polymerization in acetonitrile with 2,2′-azobisisobutyronitrile (AIBN) as initiator. The polymeric microspheres were formed simultaneously via a precipitation polymerization manner during the distillation of the solvent out of the reaction system in the absence of any surfactant and crosslinker. Monodisperse PMAA microspheres with spherical shape and smooth surface were synthesized with diameters ranging from 60 to 290 nm below the glass transition temperature of PMAA without any stabilizer. The particle size increased with increasing monomer concentration, which may be resulted from the higher molecular weight for the polymerization. To investigate the growth procedure of PMAA microspheres, the morphology of microspheres over the distillated acetonitrile volume was conducted by monitoring the morphologies with TEM. GPC and FTIR provide key insights into the particle growth mechanism. The PMAA microspheres may be formed by an internal contraction due to the marginal solvency of the continuous phase with the aid of the hydrogen-bonding interaction between the carboxylic acid unit, in which the particles were stabilized by the steric effect of the pendent chains and surface gel as well as the electrostatic repulsion from the carboxylic acid group.     

Thermal Dehydration and Miscibility of PHEMA/PMAA Blends

Miscibility and dehydration of poly(2-hydroxyethyl methacrylate) and poly(methacrylic acid) (PHEMA/PMAA) blends were investigated by temperature modulated DSC (TMDSC), TG and solid-state ¹³C NMR methods. TMDSC spectra and ¹H spin-relaxation times showed that the blends are homogeneous on a scale of 5-10 nm for all compositions. From TG and ¹³C NMR, we elucidated that the mass loss of the blends at 300°C is ascribed to the dehydration between the hydroxyl group of PHEMA and the carboxyl group of PMAA. This revised version was published online in August 2006 with corrections to the Cover Date.     

Effect of thickness on the thermal properties of hydrogen-bonded LbL assemblies

Layer-by-layer (LbL) assemblies have attracted much attention for their functional versatility and ease of fabrication. However, characterizing their thermal properties in relation to the film thickness has remained a challenging topic. We have investigated the role of film thickness on the glass transition temperature (T(g)) and coeffecient of thermal expansion for poly(ethylene oxide)/poly(acrylic acid) (PEO/PAA) and PEO/poly(methacrylic acid) (PEO/PMAA) hydrogen-bonded LbL assemblies in both bulk and ultrathin films using modulated differential scanning calorimetry (modulated DSC) and temperature-controlled ellipsometry. In PEO/PAA LbL films, a single, well-defined T(g) was observed regardless of film thickness. The T(g) increased by 9 °C relative to the bulk T(g) as film thickness decreased to 30 nm because of interactions between the film and its substrate. In contrast, PEO/PMAA LbL films show a single glass transition only after a thermal cross-linking step, which results in anhydride bonds between PMAA groups. The T(g), within error, was unaffected by film thickness, but PEO/PMAA LbL films of thicknesses below ~2.7 μm exhibited a small amount of PEO crystallization and phase separation for the thermally cross-linked films. The coefficients of thermal expansion of both types of film increased with decreasing film thickness.     

Positive mode electrospray tandem mass spectrometry of poly(methacrylic acid) oligomers

The dissociation of small poly(methacrylic acid) (PMAA) cations produced by electrospray was characterized by tandem mass spectrometry. Similarly to PMAA ions produced in the negative ion mode, the two electrosprayed cationic forms, namely [PMAA+Na]⁺ and [PMAA‐H+2Na]⁺, were shown to fragment via a major pathway consisting of successive dehydration steps. Elimination of a water molecule would occur between two consecutive acid groups in a charged‐remote mechanism and was shown to proceed as many times as pairs of acidic pendant groups were available. As a result, comparing the number of dehydration steps observed in the MS/MS spectrum of two consecutive oligomers from the polymeric distribution reveals the degree of polymerization of the molecule. Secondary less informative reactions were shown to consist of losses of CO and/or CO₂, depending on the nature of the precursor ion. These fragmentation rules could be used to characterize PMAA‐based copolymers, as successfully demonstrated for a polymeric impurity in the tested PMAA sample. Copyright © 2009 John Wiley & Sons, Ltd.     

Reparation of silica/poly(methacrylic acid)/poly(divinylbenzene-co-methacrylic acid) tri-layer microspheres and the corresponding hollow polymer microspheres with movable silica core

 Hollow poly(divinylbenzene-co-methacrylic acid) (P(DVB-co-MAA)) microspheres were prepared by the selective dissolution of the non-crosslinked poly(methacrylic acid) (PMAA) mid-layer in ethanol from the corresponding silica/PMAA/P(DVB-co-MAA) tri-layer hybrid microspheres, which were afforded by a three-stage reaction. Silica/PMAA core-shell hybrid microspheres were prepared by the second-stage distillation polymerization of methacrylic acid (MAA) via the capture of the oligomers and monomers with the aid of the vinyl groups on the surface of 3-(methacryloxy)propyl trimethoxysilane (MPS)-modified silica core, which was prepared by the Stöber hydrolysis as the first stage reaction. The tri-layer hybrid microspheres were synthesized by the third-stage distillation precipitation copolymerization of functional MAA monomer and divinylbenzene (DVB) crosslinker in presence of silica/PMAA particles as seeds, in which the efficient hydrogen-bonding interaction between the carboxylic acid groups played as a driving force for the construction of monodisperse hybrid microspheres with tri-layer structure. The morphology and the structure of silica core, silica/PMAA core-shell particles, the tri-layer hybrid microspheres and the corresponding hollow polymer microspheres with movable silica cores were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy (XPS).     

Effect of cyclodextrins on pH-induced conformational transition of poly(methacrylic acid)

A pH-induced conformational transition of atactic poly(2-methylprop-2-enoic acid) (poly(methacrylic acid), PMMA) from the contracted to expanded conformation was investigated by viscometry, potentiometric titration, and anthracene solubilisation in the presence of low-molecular-mass non-ionogenic co-solutes-glucose, α-cyclodextrin (αCD), and γ-cyclodextrin (γCD), respectively. No effect of glucose and αCD on the conformational transition was observed with either of the methods used. On the other hand, the characteristic features of the conformational transition were absent in the presence of γCD. The different effects of the co-solutes indicate that the interaction between PMAA and γCD corresponds to the partial inclusion of the PMAA chain into the γCD cavity. The viscometry and anthracene solubilisation imply that γCD promotes the expanded conformation of PMAA at low pH. The potentiometric titration does not support this conclusion. Even though there is no break on the Henderson-Hasselbalch plot, a characteristic of the conformational transition, the potentiometric behaviour corresponds to that of the contracted PMMA conformation. Thus the results suggest the hierarchical picture of the PMAA conformation at low pH in which the local arrangement of the PMAA chain is a prerequisite for clustering on a larger scale.     

Formation and surface properties of raspberry-like silica particles: effect of molecular weight of the coating poly(methacrylic acid) brushes

In this work, silica particles were firstly modified with poly(methyl methacrylate) and then converted to poly(methacrylic acid) (PMAA). The PMAA brushes with different molecular weight were used to modify the seed particles and learn the formation process of the raspberry-like particles. Silica particles with core–shell structure were obtained when the silica seed particles were modified only with carboxyl functional groups. With the increase of the molecular weight of PMAA brushes, uniform raspberry-like silica particles appeared gradually. But when the molecular weight of PMAA brushes was above 136,100, the morphologies became complicated. The electric charge of the polymer brushes was also found to have influence on the final morphologies of the particles. The contact angle (CA) tests showed that films composed of nanoparticles with uniform raspberry-like structures had an average CA of 157.2°, which indicated great prospects in the super-hydrophobic applications.     

Thermal analysis of polymer networks consisting of different homopolymers

TG and DSC were carried out on PMAA-net-POTM in order to elucidate the relation between the heterogeneity and the thermal changes; moreover, TG and DSC were carried out on PPOTMDM and PMAA to compare the results. The onset temperature in the last stage in the TG curve of PMAA-net-POTM increases as the concentrations of DMF and POTMDM in the polymerization decrease. This is explained in terms of plasticizers effects. A single peak due to fusion of POTM chains appears in the DSC curves of most copolymers. However, it is not seen in the DSC curves of copolymers with high heterogeneity. This is explained in terms of the freezing of POTM chains by frozen heterogeneous moieties.     

Thermodynamic study of solvent-free reaction between 17-methyltestosterone and o-aminophenol

In this work we investigated the possibilities of the solvent free synthesis of Schiff base (azomethyne) from 17-methyltestosterone and o-aminophenol. The study of the binary mixtures of 17-methyltestosterone and o-aminophenol was achieved by DSC, TG–DSC, and FTIR. The isolated compounds and reaction product were studied by adiabatic bomb calorimetry in order to determine the heat of reaction. The DSC data reveal a simple eutectic followed by a chemical reaction in liquid phases. From the DSC data we calculated the enthalpy of decomposition of reaction product as (44.65 ± 0.83) kJ · mol^?1. Schiff base formation by condensation reaction was highlighted by TG–DSC method and the structure of the solid product was confirmed by FTIR spectroscopy. The standard enthalpy of reaction was calculated from the standard molar enthalpy of formation of reactants and products.     

Enthalpy Relaxation in Glasses: Regression analysis of integral DSC data

A new method of calculation of parameters of enthalpy relaxation models is proposed. Regression analysis treatment compares the experimental and calculated values of relaxation enthalpy. The experimental values of relaxation enthalpy are obtained by numerical integration of the difference between the two DSC curves. Contrary to the overall shape of the DSC curve the integral values are not affected by particular heat flow conditions during the DSC experiment. The Narayanaswamy's numerical model based on the Kohlrausch—William—Watts relaxation function was used to calculate the theoretical values of relaxation enthalpy. The application of the proposed method on the DSC experimental data of enthalpy relaxation of As₂Se₃ is shown.This revised version was published online in November 2005 with corrections to the Cover Date.     

Heterogeneous polyelectrolyte gels as stimuli-responsive membranes

Stimuli-responsive membranes may act as “on–off switches” or “permeability valves”, producing patterns of pulsatile release, where the period and rate of mass transfer can be controlled by external or environmental triggers (e.g. pH, temperature, electric field). In this work, composite-heterogeneous polyelectrolyte gel (composite-HPG) membranes consisting of polymethacrylic acid (PMAA) gel particles dispersed within a polydimethylsiloxane (PDMS) network were developed and evaluated as pH-responsive membranes.The mechanism of permeability control for caffeine and vitamin B₁₂ through composite-HPG membranes was determined to be a synergistic function of membrane hydration and the percolating volume fraction of PMAA gel. Larger changes in permeation as a function of pH were achieved when both hydration and percolation effects occurred together than when either of these effects occurred on their own. Vitamin B₁₂ permeation was observed when the hydrated gel volume fraction was above approximately 0.38, but not below. Furthermore, the percolating fraction of composite-HPG membranes containing 28% (dry basis) PMAA gel particles was manipulated via pH to fall above (pH 7) or below (pH 3) this transition in permeability, resulting in membranes that delivered solutes of high molecular weight (vitamin B₁₂) with large on/off delivery ratios (160).     

SYNTHESIS OF POLY(DIVINYLBENZENE-co-ACRYLIC ACID) HOLLOW MICROSPHERES WITH GOLD NANOPARTICLES ON THE INTERIOR SURFACE

Poly(divinylbenzene-co-acrylic acid) (poly(DVB-co-AA)) hollow microspheres with gold nanoparticles on the interior surfaces were prepared from the gold nanoparticles-coated poly(methacrylic acid) (PMAA@Au@poly(DVB-co-AA)) core-shell microspheres by removal of the PMAA core in water.Au nanoparticles-coated PMAA microspheres were afforded by the in-situ reduction of gold trichloride with PMAA microsphere as stabilizer via the interaction between carboxylic acid groups and Au nanoparticles.Gold nanoparticle...     

Competitive complex forming reactions between monosubstituted and nonsubstituted poly(ethylene glycol)s with poly(methacrylic) acid

A competitive complex forming reaction between a number of monosubstituted poly(ethylene glycol)s (PEG*) containing a hydrophobic group of differing chemical nature and nonsubstituted PEG of various molecular weights with poly(methacrylic acid) (PMAA) was studied. A UV spectroscopy method was used. During the transfer of the hydrophobic chromophoric group from the aqueous medium into the hydrophobic domains of the polycomplex (PMAA.PEG*), a bathochromic effect was observed. The introduction of a hydrophobic group into the PEG chain leads to stabilization of the polycomplex (PMAA.PEG) that is formally the same as growing the chain length of PEG. The polymerization degree of PEG having the same competitive power as PEG* can be used as the peculiar scale of the complex forming ability of PEG* in the complexation with PMAA. © 1996 John Wiley & Sons, Inc.     

Effect of temperature on self-assembly of an ionic tetrapeptide

The self-aggregation of the ionic tetrapeptide RWDW (R = arginine, W = tryptophan, D = aspartic acid) was studied at three temperatures (15, 25 and 35 °C) by different experimental techniques such as atomic force microscopy (AFM), isothermal titration calorimetry (ITC) and differential scanning calorimetry (DSC). AFM was used to investigate the morphology of the aggregates; the AFM images at 15 °C showed the presence of a dense network of entangled fibres, while at 35 °C the peptide assembled into sparse globular and fibrillar structures. Moreover, the calorimetric experiments showed that in all cases the disaggregation process is endothermic and dependent on the investigated temperature. Both the enthalpy of disaggregation and the cac change with temperature. In particular, at 35 °C, we obtained the lower enthalpy of disaggregation and higher cac, showing that the disaggregation process is favoured at high temperature. The DSC scans strengthen the hypothesis that the RWDW aggregation is a rather complex phenomenon.     

Interaction between poly(N-vinylpyrrolidone) and poly(acrylic acid)s: Influence of hydrogen and cupric ions on the adduct formation

Interpolymer adduct formation between poly(N-vinylpyrrolidone) (PVP) and poly(methacrylic acid) (PMAA) is mainly due to hydrogen bonding. It is found that the interpolymer adduct formation is enhanced in the presence of Cu(II). A simple turbidity measurement making use of a spectrophotofluorometer is described for the study of the interpolymer adduct formation. Enhanced adduct formation in the presence of Cu(II) is described by the empirical relation d[PAd]/D[PVP] = k × 10^4α[Cu(II)]^α, where PAd represents the interpolymer adduct and α and k are constants. Similar results have been obtained in the case of interpolymer adduct formation between poly(acrylic acid) (PAA) and PVP. In the above expression α signifies the influence of chelation on Cu(II)–PAA/PMAA–PVP-type complex formation and k is the extent of PVP–PAA/PMAA interaction. The enhancement of adduct formation in the presence of Cu(II) is more in PAA than in PMAA. Turbidity and viscosity measurements further indicate that the influence of Cu(II) on interpolymer adduct formation between PVP and PMAA or PAA is more in the case of PAA than PMAA, as PAA is a better chelating ligand. But the extent of adduct formation is more in the case of PMAA in the absence of Cu(II) ions due to hydrophobic interactions exerted by methyl groups.     

Efficient Structural Characterization of Poly(Methacrylic Acid) by Activated-Electron Photodetachment Dissociation

Characterization of end-groups in poly(methacrylic acid) (PMAA) was achieved using tandem mass spectrometry after activated-electron photodetachment dissociation (activated-EPD). In this technique, multiply deprotonated PMAA oligomers produced in the negative-ion mode of electrospray ionization were oxidized into radical anions upon electron photodetachment using a 220 nm laser wavelength, and further activated by collision. In contrast to conventional collision induced dissociation of negatively charged PMAA, which mainly consists of multiple dehydration steps, fragmentation of odd-electron species is shown to proceed via a radical-induced decarboxylation, followed by reactions involving backbone bond cleavages, giving rise to product ions containing one or the other oligomer termination. A single radical-induced mechanism accounts for the four main fragment series observed in MS/MS. The relative position of the radical and of the anionic center in distonic precursor ions determines the nature of the reaction products. Experiments performed using PMAA sodium salts allowed us to account for relative abundances of product ions in series obtained from PMAA, revealing that ion stability is ensured by hydrogen bonds within pairs of MAA units.     

Kinetic and thermodynamic treatment of gasification process for some s-triazines

Solid-gas phase transition processes of some triazines were studied from kinetic and thermodynamic viewpoint. DSC measurements and Clausius-Clapeyron equation were used to determine enthalpy values related to these processes. Model-fitting methods (based on Arrhenius, Šatava equations and Šesták-Berggren equations) and model-free methods (based on Ozawa-Flynn-Wall and Kissinger equations) allow to hypothesis R2 mechanism. An attempt to determine the activation parameters (ΔH ^#, ΔG ^#, ΔS ^#) related to these processes was carried out. Accordance between the activation enthalpy values with those of activation energy obtained by means of kinetic methods and with the experimental (DSC) and calculated (Clausius-Clapeyron) enthalpy values was found. This revised version was published online in August 2006 with corrections to the Cover Date.     

Nanomechanical properties of polymer brushes by colloidal AFM probes

Nanomechanical properties of end grafted polymer layers were studied by AFM based, colloidal probe compression measurements. Zwitterionic poly(sulfobetaine methacrylate) (PSBMA) brush was grafted from planar Si surface and poly(methyl methacrylate) (PMAA) brush was grown on colloidal probe by surface initiated atom transfer radical polymerization. PMAA brush was further modified with adhesion promoting arginyl-glycyl-aspartic acid (RGD) peptide sequences. Force–distance curves were obtained for systems where the polymer brushes were probed on unmodified surfaces or face to each other. For each systems the grafting density of the polymer brush was determined applying a ‘box’ like polymer brush model based on the theory by de Gennes. ‘Average’ grafting density was calculated in cases when two polymer brushes face each other: RGD functionalized PMAA or PMAA against PSBMA. For our systems the values for the grafting density was between 0.04 and 0.11 nm^?2. Furthermore the measured approach force–distance curves were fitted according to the Hertz model and the apparent Young’s modulus was determined for all measurements being in a range of around 250 kPa at physiological conditions.