Kinetics and selectivity of permanganate chemiluminescence: a study of hydroxyl and amino disubstituted benzene positional isomers

Examination of the chemiluminescence reactions of dihydroxybenzenes, aminophenols and phenylenediamines with acidic potassium permanganate has provided a new understanding of the relationships between analyte structure, reaction conditions, kinetics of the light-producing pathway and emission intensity, with broad implications for this widely utilised chemiluminescence detection system. Using a permanganate reagent prepared in a polyphosphate solution and adjusted to pH 2.5, large differences in the rate of reaction with different positional isomers were observed, with the meta-substituted forms reacting far slower and therefore exhibiting much lower chemiluminescence intensities in flow analysis systems. The preliminary partial reduction of permanganate to form significant concentrations of Mn(III) increased the rate of reaction with all analytes tested, resulting in comparable or (in the case of aminophenol and phenylenediamine) even greater emission intensities for the meta-isomers, demonstrating the opportunity to tune the selectivity of the reagent towards certain classes of compound or even specific positional isomers of the same compound. Using more acidic permanganate reagents, in which polyphosphates are not required, the discrepancy between the chemiluminescence intensities was still observed, but was less prominent due to the generally faster rates of reaction. The enhancement of these chemiluminescence reactions by on-line addition of formic acid or formaldehyde can in part also be attributed to the generation of significant pools of the key Mn(III) precursor to the emitting species.     

Permanganate-based chemiluminescence analysis of ferulic acid using flow injection.

A simple, sensitive and rapid flow-injection chemiluminescence method has been developed for the determination of ferulic acid based on the chemiluminescence reaction of ferulic acid with potassium permanganate in a nitric acid medium. A strong chemiluminescence signal was observed when ferulic acid was injected into an acidic potassium permanganate solution in a flow-cell. The present method allowed the determination of ferulic acid in the concentration range of 6.0 x 10(-6) to 2.0 x 10(-4) mol l(-1); the detection limit (3sigma) for ferulic acid was 9.6 x 10(-8) mol l(-1). The relative standard deviation was 1.0% for 11 replicate analyses of 2.0 x 10(-4) mol l(-1) ferulic acid. The proposed method was applied to the determination of ferulic acid in real samples with satisfactory results. Moreover, the reaction mechanism of the chemiluminescence system was primarily considered.     

Screening for antioxidants in complex matrices using high performance liquid chromatography with acidic potassium permanganate chemiluminescence detection

The use of high performance liquid chromatography with acidic potassium permanganate chemiluminescence detection to screen for antioxidants in complex plant-derived samples was evaluated in comparison with two conventional post-column radical scavenging assays (2,2-diphenyl-1-picrylhydrazyl radical (DPPH) and 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid) radical cation (ABTS(+))). In this approach, acidic potassium permanganate can react with readily oxidisable compounds (potential antioxidants), post-column, to produce chemiluminescence. Using flow injection analysis, experimental parameters that afforded the most suitable permanganate chemiluminescence signal for a range of known antioxidants were studied in a univariate approach. Optimum conditions were found to be: 1×10(-3)M potassium permanganate solution containing 1% (w/v) sodium polyphosphates adjusted to pH 2 with sulphuric acid, delivered at a flow rate of 2.5 mL min(-1) per line. Further investigations showed some differences in detection selectivity between HPLC with the optimised post-column permanganate chemiluminescence detection and DPPH and ABTS(+) assays towards antioxidant standards. However, permanganate chemiluminescence detection was more sensitive. Moreover, screening for antioxidants in green tea, cranberry juice and thyme using potassium permanganate chemiluminescence offers several advantages over the traditional DPPH and ABTS(+) assays, such as faster reagent preparation and superior stability; simpler post-column reaction manifold; and greater compatibility with fast chromatographic separations using monolithic columns.     

Soluble manganese(IV) as a chemiluminescence reagent for the determination of opiate alkaloids, indoles and analytes of forensic interest

We present the results of our investigations into the use of soluble manganese(IV) as a chemiluminescence reagent, which include a significantly faster method of preparation and a study on the effect of formaldehyde and orthophosphoric acid concentration on signal intensity. Chemiluminescence detection was applied to the determination of 16 analytes, including opiate alkaloids, indoles and analytes of forensic interest, using flow injection analysis methodology. The soluble manganese(IV) reagent was less selective than either acidic potassium permanganate or tris(2,2′-bipyridyl)ruthenium(III) and therefore provided a more universal chemiluminescence detection system for HPLC. A broad spectral distribution with a maximum at 730 ± 5 nm was observed for the reaction between the soluble manganese(IV) and a range of analytes, as well as the background emission from the reaction with the formaldehyde enhancer. This spectral distribution matches that reported for chemiluminescence reactions with acidic potassium permanganate, where a manganese(II) emitting species was elucidated. This provides further evidence that the emission evoked in reactions with soluble manganese(IV) also emanates from a manganese(II) species, and not bimolecular singlet oxygen as suggested by previous authors.     

Selective determination of amino acids using flow injection analysis coupled with chemiluminescence detection

The determination of the amino acids proline, histidine, tyrosine, arginine, phenylalanine and tryptophan using flow injection analysis (FIA) with chemiluminescence detection is described. Proline was the only amino acid to exhibit chemiluminescence with the tris(2,2-bipyridyl)ruthenium(III) reaction at pH 10. While, histidine was found to selectively enhance the reaction of luminol with Mn(II) salts in a basic medium. Acidic potassium permanganate chemiluminescence was able to selectively determine tyrosine at pH 6.75. Low pressure separations using a C18 guard column allowed the simultaneous determination of tyrosine and tryptophan or phenylalanine and tryptophan with acidic potassium permanganate and copper(II)-amino acid-hydrogen peroxide chemiluminescence, respectively. Precision for each method was less than 3.9% (R.S.D.) for five replicates of a standard (1×10⁻⁵ M) and the detection limits ranged between 4×10⁻⁹ and 7×10⁻⁶ M. Preliminary investigations revealed that the methodology developed was able to selectively determine the individual amino acids in an equimolar mixture of the 20 naturally occurring amino acids.     

A screening test for heroin based on sequential injection analysis with dual-reagent chemiluminescence detection

A sequential injection analysis procedure with dual-reagent chemiluminescence detection was applied to the screening of street drug seizure samples for the presence of heroin. The chemiluminescence reagents (acidic potassium permanganate and tris(2,2'-bipyridine)ruthenium(III)) were aspirated from either side of a sample aliquot that was sufficiently large to prevent interdispersion of the reagent zones, and therefore two different chemical reactions could be performed simultaneously at either end of the sample zone. The presence of heroin in seizure samples was indicated by a strong response with the tris(2,2'-bipyridine)ruthenium(III) reagent and confirmed by a significant increase in the response with the permanganate reagent when the sample was treated with sodium hydroxide to hydrolyse the heroin to morphine. Nicomorphine (a morphine-derived pharmaceutical) was synthesised and tested under the same conditions. The responses with the permanganate reagent were similar to those for heroin, which supports the proposed chemical basis for the test. However, the responses with tris(2,2'-bipyridine)ruthenium(III) were far lower for nicomorphine than heroin (approximately 5-fold for the samples that had not been hydrolysed).     

The importance of chain length for the polyphosphate enhancement of acidic potassium permanganate chemiluminescence

Sodium polyphosphate is commonly used to enhance chemiluminescence reactions with acidic potassium permanganate through a dual enhancement mechanism, but commercially available polyphosphates vary greatly in composition. We have examined the influence of polyphosphate composition and concentration on both the dual enhancement mechanism of chemiluminescence intensity and the stability of the reagent under analytically useful conditions. The average chain length (n) provides a convenient characterisation, but materials with similar values can exhibit markedly different distributions of phosphate oligomers. There is a minimum polyphosphate chain length (∼6) required for a large enhancement of the emission intensity, but no further advantage was obtained using polyphosphate materials with much longer average chain lengths. Providing there is a sufficient average chain length, the optimum concentration of polyphosphate is dependent on the analyte and in some cases, may be lower than the quantities previously used in routine detection. However, the concentration of polyphosphate should not be lowered in permanganate reagents that have been partially reduced to form high concentrations of the key manganese(III) co-reactant, as this intermediate needs to be stabilised to prevent formation of insoluble manganese(IV).     

Chemiluminescence detection of the benzodiazepine loprazolam

The screening of seven benzodiazepines for chemiluminescent reactions with oxidising and reducing agents is reported. Only one (loprazolam) gave any significant emission. The conditions for the chemiluminescence emission from the reaction between acidic potassium permanganate and loprazolam were optimised. The limit of detection was 163 ng (7×10^?6 mol per 50 μl) of loprazolam. The application of this reaction to the analysis of pharmaceutical preparations is discussed.     

Capillary electrophoresis separation and permanganate chemiluminescence on-line detection of some alkaloids with beta-cyclodextrin as an additive.

Capillary electrophoresis has been used in combination with on-line permanganate chemiluminescence detection for the simultaneous determination of morphine, 6-monoacetylmorphine and heroin. It was found that beta-cyclodextrins could improve the separation efficiency and enhance the chemiluminescence signal. Improved sensitivity over capillary electrophoresis with UV detection was obtained. The procedure has detection limits of 23, 66 and 115 fmol for morphine, 6-monoacetylmorphine and heroin, respectively.     

Determination of phenylephrine hydrochloride by flow injection analysis with chemiluminescence detection

A new method is proposed for the determination of phenylephrine hydrochloride by flow injection analysis with direct chemiluminescence detection. The method is based on the oxidation of the drug by potassium permanganate in sulfuric acid medium at 80 degrees C. The calibration graph is linear over the range 0.03-8 ppm phenylephrine hydrochloride, with a relative standard deviation (n = 51, 0.5 ppm) of 1.1% and sample throughput of 134/h. The influence of 38 different foreign compounds was tested, and the method was applied to the determination of phenylephrine hydrochloride in 8 different pharmaceutical formulations.     

Permanganate-based chemiluminescence analysis of cefadroxil monohydrate in pharmaceutical samples and biological fluids using flow injection

A chemiluminescent method using flow injection is described for the determination of cefadroxil monohydrate. The method is based on the chemiluminescence reaction of cefadroxil with potassium permanganate in sulphuric acid, sensitized by quinine. The proposed procedure allows the determination of cefadroxil over the concentration range 0.1-30 mug ml(-1) with a detection limit of 0.05 mug ml(-1) and a sample measurement frequency of 150 samples h(-1). The method was successfully applied to the determination of cefadroxil in pharmaceutical preparations and biological fluids.     

Development of an automated chemiluminescence flow-through sensor for the determination of 5-aminosalicylic acid in pharmaceuticals: a comparative study between sequential and multicommutated flow techniques

This work is aimed at demonstrating the potential of the implementation of automatic flow systems in optosensors using chemiluminescence detection. With this purpose, two automatic methodologies, multicommutation and sequential injection analysis (SIA), have been applied to the analysis of 5-aminosalicylic acid (ASA). The analyte is determined for the first time making use of its chemiluminescence reaction with permanganate anion, previously immobilized on an appropriate solid support in the detection area. First, the study of the most appropriate commercial flow-through cell and the optimum conditions for the reaction were performed. Second, the main differences in terms of flow variables and analytical parameters for multicommutation and SIA approaches were stated. Both methodologies were applied to the determination of the analyte in pharmaceuticals obtaining satisfactory results. Finally, the advantages and disadvantages of both proposed methods and the recoveries obtained from pharmaceuticals were statistically compared.     

Determination of ceftriaxone sodium in pharmaceutical formulations by flow injection analysis with acid potassium permanganate chemiluminescence detection.

Based on the chemiluminescence (CL) emission generated from the oxidation of ceftriaxone sodium alkali hydrolysate by potassium permanganate in polyphosphoric acid (PPA), a novel determination method for ceftriaxone sodium was developed by using a flow-injection technique. The calibration curve appears to be linear in the range between 0.05 and 100 microg mL(-1) with a detection limit (3sigma) of 25 ng mL(-1), and a relative standard deviation (RSD) of 0.6% for eleven replicate determinations of 5.0 microg mL(-1) ceftriaxone sodium. The proposed method has been successfully utilized for the determination of ceftriaxone sodium in pharmaceutical formulations, while the chemiluminescence reaction mechanisms were investigated.     

Enhanced permanganate chemiluminescence

The significant enhancement of acidic potassium permanganate chemiluminescence by Mn(II) results from the concomitant presence of permanganate and Mn(III) in the reagent solution, which enables rapid production of the excited Mn(II) emitter with a wide range of analytes. Furthermore, the key Mn(III) co-reactant can be quickly generated by reducing permanganate with sodium thiosulfate, instead of the slow (~24 h) equilibration required when Mn(ii) is used. The emission from reactions with analytes such as tyrosine and fenoterol was over two orders of magnitude more intense than with the traditional permanganate reagent.     

Geographical classification of some Australian wines by discriminant analysis using HPLC with UV and chemiluminescence detection

HPLC with UV and acidified potassium permanganate chemiluminescence detection, combined with multivariate data analysis techniques, were used for the geographical classification of some Australian red (Cabernet Sauvignon) and white (Chardonnay) wines from two regions (Coonawarra and Geelong). Identification of the wine constituents prominent in the chromatography was performed by mass spectrometry. Principal components analysis and linear discriminant analysis were used to classify the wines according to region of production. Separation between regions was achieved with both detection systems and key components leading to discrimination of the wines were identified. Using two principal components, linear discriminant analysis with UV detection correctly classified 100% of the Chardonnay wines and, overall 91% of the Cabernet Sauvignon wines. With acidified potassium permanganate chemiluminescence detection, 75% of the Chardonnay wines and 94% of the Cabernet Sauvignon wines were correctly classified using two factors.     

地塞米松磷酸钠的流动注射-化学发光分析法的研究

实验了地塞米松磷酸钠在K3Fe（CN）6-鲁米诺、KMnO4-鲁米诺、KIO4-鲁米诺、H2O2-鲁米诺体系中的化学发光现象。结果表明,地塞米松磷酸钠能够显著增强K3Fe（CN）6-鲁米诺体系和KMnO4-鲁米诺体系的化学发光强度,而在另外两个体系中没有增强作用。结合流动注射技术,分别在K3Fe（CN）6-鲁米诺体系和KMnO4-鲁米诺体系中建立了测定地塞米松的新方法。方法的线性范围分别为1.0×10^-7-1.0×10^-5g/mL和6.0×10^-8-1.0×10^-5g/mL,检出限分别为3.0×10^-8g/mL和2.0×10^-8g/mL,相对标准偏差分别为1.6%和1.9%（1.0×10^-6g/mL地塞米松,n=11）。此法已用于针剂和片剂样品的测定,结果与药典方法没有显著性差异。     

Chemiluminescence of Potassium Permanganate–Glyoxal–Sulfur Contained Compound System

Abstract

Sulfur contained compound (SCC) had different abilities in term of increasing the intensity of chemiluminescence of potassium permanganate with glyoxal. In a flow system, including methimazole, captopril, cimetidine, methionine, chloropromazine hydrochloride, chlorprothixene and propacil, enhanced intensity was detected, therefore the CL of potassium permanganate–glyoxal–SCC system was studied. Under the optimized experimental conditions, low detection limit and large calibration ranges for Sulfur contained compound were obtained. The proposed method allowed 90 injections h^?1 with excellent repeatability and precision. The method was successfully applied to the determination of six SCC in commercial pharmaceutical formulations with recoveries in the range of 97.24–102.2%. The method was validated through the pharmacopoeia reference method. The possible chemiluminescence reaction mechanism of potassium permanganate–glyoxal–SCC was discussed briefly.     

Rapid flow injection method for the determination of sulfite in wine using the permanganate-luminol luminescence system

A simple, rapid and sensitive chemiluminescence method for the determination of sulfite has been developed by combining flow-injection analysis and its sensitizing effect on the known chemiluminescence emission produced by the oxidation of luminol in alkaline medium; in this work permanganate has been proposed as oxidizing reactive. The optimum conditions for the chemiluminescence emission were established. The chemiluminescence was proportional to the sulfite concentration over the range 1.6 × 10⁻⁵ and 4.0 × 10⁻⁴ mol L⁻¹. The detection limit was 4.7 × 10⁻⁶ mol L⁻¹ of sulfite. The method has been satisfactorily used for the determination of free and bound sulfite in wines.     

Determination of morphine, oripavine and pseudomorphine using capillary electrophoresis with acidic potassium permanganate chemiluminescence detection

A simple and robust capillary electrophoresis chemiluminescence detection system for the determination of morphine, oripavine and pseudomorphine is described, based upon the reaction of these analytes with acidic potassium permanganate in the presence of sodium polyphosphate. The reagent solution was contained in a quartz detection cell which also held both the capillary and the anode. The resultant chemiluminescence was monitored directly using a photomultiplier tube mounted flush against the base of the detection cell. To ensure that no migration of the permanganate anion occurred, the anode was placed at the detector end whilst the electroosmotic flow was reversed by the addition of hexadimethrine bromide (0.001% m/v) to the electrolyte. The three analytes were separated counter to the electroosmotic flow via their interaction with alpha-cyclodextrin. The methodology realised detection limits (3 x S/N) of 2.5 x 10(-7) M for both morphine and oripavine and 5 x 10(-7) M for pseudomorphine. The relative standard deviations of the migration times and the peak heights for the three analytes ranged from 0.6 up to 0.8% and from 1.5 up to 2.1%, respectively.     

Determination of albumin in biological fluids by flow injection analysis using the peroxyoxalate chemiluminescent system in micellar medium

A novel chemiluminescence (CL) method for the determination of papaverine (PAP) has been developed by combining the flow injection technique and its sensitizing effect on the weak CL reaction between sulfite and acidic permanganate. A mechanism for the CL reaction has been proposed on the basis of fluorescent and chemiluminescence spectra. The CL response is proportional to the concentration of PAP over the range 0.2-10 micro mol L(-1). The detection limit of PAP is 0.10 micro mol L(-1) (3 s) with a relative standard deviation (RSD) of 2.0% for 10 repetitive determinations of 1.0 micro mol L(-1) PAP. Interferences from other alkaloids in the opium, such as morphine and codeine, are negligible except that of narcotine. The method has been satisfactorily used for the determination of PAP in injections and compound liquorice tablets.