Effect of source temperature on the morphology and photoluminescence properties of ZnO nanostructures

ZnO nanostructures have been synthesized by heating a mixture of ZnO/graphite powders using the thermal evaporation and vapor transport on Si(1 0 0) substrates without any catalyst and at atmospheric argon pressure. The influence of the source temperature on the morphology and luminescence properties of ZnO nanostructures has been investigated. ZnO nanowires, nanoflowres and nanotetrapods have been formed upon the Si(1 0 0) substrates at different source temperatures ranging from 1100 to 1200 °C. Room temperature photoluminescence (PL) spectra showed increase green emission intensity as the source temperature was decreased and ZnO nanowires had the strongest intensity of UV emission compared with other nanostructures. In addition, the growth mechanism of the ZnO nanostructures is discussed based on the reaction conditions.     

Effect of substrate temperature on the growth and luminescence properties of ZnO nanostructures

ZnO nanowires, nanorods and nanoribbons have been prepared by heating a mixture of ZnO/graphite powders using the thermal evaporation and vapor transport on Si(1 0 0) substrates without any catalyst. The nanostructures are grown as a function of substrate temperature ranging from 900 to 1300 K. These nanostructures are of the size 100–300 nm in diameter or width and several tens of micrometers in length. We studied the influence of the substrate temperature on the luminescent properties of these nanostructures. We observed a strong relationship between the substrate temperature and the green emission band in ZnO, i.e., the photoluminescence study revealed that the green emission peak of the ZnO nanostructures is suppressed relative to the band edge emission when the substrate temperature is decreased from 1300 to 900 K.     

Substrate effects on ZnO nanostructure growth via nanoparticle-assisted pulsed-laser deposition

The effects of various substrate conditions on the morphology, crystal structure and photoluminescence of ZnO nanostructures synthesized by nanoparticle-assisted pulsed-laser ablation deposition were investigated. It is concluded that the sapphire substrate with a 1 h anneal at 1000 °C is the most favorable to the vertical growth of ZnO nanostructures. SEM analysis indicates that the well-aligned diameter-modulated ZnO nanonails with unique shape were successfully synthesized on the annealed sapphire substrate. The as-synthesized ZnO nanostructures exhibit an ultraviolet emission at around 390 nm and the absent green emission under room temperature, indicating that there is a very low concentration of deep-level defects inside ZnO lattices. The novel ZnO nanostructures could offer novel opportunities for both fundamental research and technological applications.     

Study of ZnO-coated SnO2 nanostructures synthesized by a two-step process

We investigated the influence of the ZnO coating on the properties of one-dimensional (1D) nanostructures of SnO₂. We have employed X-ray diffraction, scanning electron microscope, transmission electron microscope and photoluminescence (PL) spectroscopy to characterize both as-synthesized and ZnO-coated products. We observed that deposition process of ZnO by using an atomic layer deposition technique resulted in the SnO₂ core/ZnO shell structure. The photoluminescence of the ZnO-coated products exhibited broad bands in the UV and green region, suggesting a possible contribution of the emission from the ZnO outlayers.     

Quasi One-dimensional ZnO Nanostructures Fabricated without Catalyst at Lower Temperature

One- or quasi one-dimensional zinc oxide nanostructures possess plenty of morphologies. Only by controlling the gas flow rates, and partial pressures of argon, oxygen and zinc vapor, can various types of high-quality ZnO nanomaterials (such as wires, belts, arrays, saws or combs, tetraleg rods, nails, and pins) be synthesized through pure zinc powder evaporation without a catalyst at the temperature range of 600–700°C. In this study, deposited nanostructures were characterized by means of scanning electron microscopy, X-ray diffraction and high-resolution transmission electron microscopy. The authors propose and discuss the growth mechanisms of various ZnO. In addition, properties of room temperature photoluminescence and field emission of several typical ZnO nanostructures are measured and investigated.     

Morphology and optical investigations of ZnO pyramids and nanoflakes for optoelectronic applications

Zinc-oxide (ZnO) pyramidal and nanoflakes were grown by electrochemical deposition of Zn(NO₃)₂·6H₂O on n-type Si substrate with different crystallographic orientations and on indium tin oxide (ITO)-coated glass. Various morphological shapes of deposited ZnO nanostructures were observed, which were investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The bulk modulus was calculated to determine the material stiffness. Two peaks were observed at room temperature photoluminescence spectrum, i.e., a near-band-edge (NBE) emission in the UV region and a broad deep-level emission (DLE) in the green emission region. The optical properties were calculated to confirm the specific models validity of ZnO nanostructures for optoelectronics. The measured and calculated values show good agreement with other data.     

Photoluminescence properties of various CVD-grown ZnO nanostructures

We have studied systematically room-temperature photoluminescence (PL) properties of many nanostructured ZnO samples grown by chemical vapour deposition (CVD). Their PL spectra consist of two emissions peaked in the ultraviolet (UV) and green regions. The relative intensity of these emissions depends on the excitation energy density, size and morphology of ZnO nanostructures. Based on the excitation-density dependence of the integrated intensity ratio of UV-to-green emission, we could classify PL spectra of ZnO nanostructures into three groups characteristic of size and morphology. Our study also reveals that with increasing excitation density, the UV-peak position shifts slightly towards longer wavelengths while the green emission around 514-520 nm is almost unchanged. This green-luminescence emission is dominant when the nanostructure sizes range from 20 to 200 nm, which is related to a large surface-to-volume ratio.     

Ultrasonic induced photoluminescence decay in sonochemically obtained cauliflower-like ZnO nanostructures with surface 1D nanoarrays

Cauliflower-like ZnO nanostructures with average crystallite size of about 55 nm which have surface one dimensional (1D) nanoarrays with 10 nm diameter were successfully fabricated through a simple sonochemical route. X-ray diffractometry (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and room temperature photoluminescence (PL) characterizations were performed to investigate the morphological and structural properties of the obtained nanostructures. It has been shown that the synthesized cauliflower-like ZnO nanostructures irradiated UV luminescence and a green peak in visible band. Ultrasonic post-treatment of the particles for about 2 h increased the density of surface defects resulted in an increase in the green emission intensity.     

Photoluminescence and Raman analysis of novel ZnO tetrapod and multipod nanostructures

Novel ZnO tetrapod and multipod nanostructures were successfully synthesized in bulk quantity through thermal evaporation method. The morphologies and structures of the ZnO nanostructures were characterized by scanning electron microscopy, X-ray diffraction and transmission electron microscopy. The results revealed that the ZnO nanostructures consisted of tetrapods and multipods with tower-like legs. The ZnO nanostructures were of high purity and were well crystallized with wurtzite structure. The preferred growth direction of legs was found to be the [0 0 0 1] direction. Possible growth mechanisms were proposed for the formation of the ZnO nanostructures. Room temperature photoluminescence (PL) spectra showed that the as-synthesized ZnO nanostructures had a strong green emission centered at 495 nm and a weak ultraviolet emission at 383 nm. Raman spectroscopy was also adopted to explore the structural quality of the ZnO nanostructures.     

退火温度对Cu:ZnO薄膜绿光发射的影响

利用溶胶-凝胶法在Si衬底上制备了不同退火温度的Cu:ZnO薄膜.利用X射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜和光致发光谱研究了样品的晶格结构、表面形貌、成分及其发光特性.结果表明:所有样品均具有高度的c轴择优取向,随着退火温度的升高,样品的结晶质量变好,样品的表面都被晶粒覆盖,强而稳定的绿光发射被观察到.绿光强度随退火温度的升高先增加后减小,发光中心位置不随退火温度的变化而改变,这样的绿光发射强而稳定.XRD和XPS结果表明,随退火温度的升高Cu2+还原为Cu+,导致Cu:ZnO薄膜形成的缺陷是VZn,所以绿光发射是由VZn引起的.Cu2+还原为Cu+时,Cu:ZnO薄膜中VZn浓度增加,使绿光发射强度增大.当退火温度超过800?C时,Cu2+的还原能力变差,绿光发射强度减弱.     

Annealing effect on structure and green emission of ZnO nanopowder by decomposing precursors

ZnO nanopowder is successfully synthesized by annealing the precursors in oxygen gas using the chemical precipitation method. Structural and optical properties of thus synthesized ZnO nanopowder are characterized by scanning electron microscopy (SEM) and photoluminescence (PL). The morphology of ZnO nanopowders evolves from nanorod to cobble as annealing temperature increases from 500 to 1000~\du, while spiral structures are observed in the samples annealed at 900 and 1000~\du. The PL spectra of ZnO nanopowder consist of largely green and yellow emission bands. The green emission from ZnO nanopowder depends strongly on the annealing temperature with a peak intensity at a temperature lower than 800~℃ while the yellow emission is associated with interstitial oxygen \rm O_\i.     

Optical properties of ZnO nanoparticles synthesized by varying the sodium hydroxide to zinc acetate molar ratios using a Sol-Gel process

Material property dependence on the OH⁻/Zn²⁺ molar ratio of the precursor was investigated by varying the amount of NaOH during synthesis of ZnO. It was necessary to control the water content and temperature of the mixture to ensure the reproducibility. It was observed that the structural properties, particle size, photoluminescence intensity and wavelength of maximum intensity were influenced by the molar ratio of the precursor. The XRD spectra for ZnO nanoparticles show the entire peaks corresponding to the various planes of wurtzite ZnO, indicating a single phase. UV measurements show the absorption that comes from the ZnO nanoparticles in visible region. The absorption edge of these ZnO nanoparticles are shifted to higher energies and the determined band gap energies are blue shifted as the OH⁻/Zn² molar ration increases, due to the quantum confinement effects. The photoluminescence characterization of the ZnO nanostructures exhibited a broad emission band centred at green (600 nm) region for all molar ratios except for OH⁻/Zn²⁺ = 1.7 where a second blue emission around 468 nm was also observed. The photoluminescence properties of ZnO nanoparticles were largely determined by the size and surface properties of the nanoparticles.     

Quantum cutting effect and photoluminescence emission at about 1,000 nm from Er–Yb co-doped ZnO nanoplates prepared by wet chemical precipitation method

ZnO nanoplates with Er-doping concentrations varying in the range from 3 to 7 wt% and co-doped with (Er–Yb) (7 + 7 wt%) were successfully prepared by wet chemical precipitation method. The effects of doping on the structural and optical properties of ZnO nanostructures have been systematically investigated. The structural morphology of the prepared nanostructures was found to change with increasing Er-doping concentrations. The visible photoluminescence and infrared photoluminescence of the prepared nanostructures were measured at room temperature. The intensity of visible emission spectra was found to increase with increasing Er-doping concentrations and was further enhanced for (Er–Yb) co-doped ZnO nanoplate samples. Additionally, Er-doped (7 wt%) and Yb-doped (7 wt%) ZnO nanoplates showed an enhanced emission peak at 950 nm, whereas two enhanced emission peaks at 950 and 980 nm have been found for (Er–Yb)-co-doped (7 + 7 wt%) ZnO nanoplates samples when excited at 310, 365 and 371 nm excitation wavelengths.     

Effect of growth temperature on the ZnO nanowires prepared by thermal heating of Zn powders

ZnO nanowires have been synthesized by heating Zn powders under nitrogen (N₂) gas atmosphere. The influence of the growth temperature on the morphology, structure, and photoluminescence (PL) properties of ZnO nanowires has been investigated. At the higher-temperature growth process, thinner nanowires have been obtained. Interestingly, it is observed that the variation of growth temperature has significantly affected the photoluminescence spectra of the ZnO nanowires, showing an enhancement in the relative intensity of the green to UV emission bands with the increase of the growth temperature. In addition, the oxygen sensing properties of the as-synthesized ZnO nanowires were tested.     

Synthesis and characterization of ZnO nanoparticles using polyethylene glycol (PEG)

ZnO nanoparticles and ZnO encapsulated with polyethylene glycol (PEG) was synthesized using zinc acetate as a precursor at low temperature and characterized by different techniques. The influence of the types of solvent, synthesis parameters, and PEG encapsulation on the crystallization, the surface morphology, and the luminescent properties of ZnO nanoparticles prepared by the sol–gel process were investigated. The influence of different addition molar masses of the PEG during the synthesis on the ZnO emission peaks was systematically monitored. The crystallinity, the surface morphology, and the photoluminescence (PL) properties of ZnO depended highly on the synthesis process and PEG encapsulation. X-ray diffraction (XRD) spectra of ZnO nanoparticles show that all the peaks corresponding to the various planes of wurtzite ZnO indicate the formation of a single phase. The absorption edges of these ZnO nanoparticles are shifted by additions of the PEG polymer. The photoluminescence (PL) characterization of the ZnO nanostructures exhibited a broad emission in the visible range with maximum peak at 450 and/or 560 nm.     

Surface enhanced Raman scattering and photoluminescence properties of catalytic grown ZnO nanostructures

Sword-like (diameter ranging from 40 nm to 300 nm) and needle-like zinc oxide (ZnO) nanostructures (average tip diameter ∼40 nm) were synthesized on annealed silver template over silicon substrate and directly on silicon wafer, respectively via thermal evaporation of metallic zinc followed by a thermal annealing in air. The surface morphology, microstructure, chemical analysis and optical properties of the grown samples were investigated by field emission scanning electron microscopy, X-ray diffraction, energy dispersive X-ray analysis, room temperature photoluminescence and Raman spectroscopy. The sword-like ZnO nanostructures grown on annealed silver template are of high optical quality compared to needle-like ZnO nanorods for UV emission and show enhanced Raman scattering.     

The effect of Al doping on the morphology and optical property of ZnO nanostructures prepared by hydrothermal process

The undoped and Al-doped ZnO nanostructures were fabricated on the ITO substrates pre-coated with ZnO seed layers using the hydrothermal method. The undoped well-aligned ZnO nanorods were synthesized. When introducing the Al dopant, ZnO shows various morphologies. The morphology of ZnO changes from aligned nanorods, tilted nanorods, nanotubes/nanorods to the nanosheets when the Al doping concentrations increase. The ZnO nanostructures were characterized by X-ray diffraction, field emission scanning electron microscopy, X-ray photoelectron spectroscopy, photoluminescence and Raman technology. The Al doping concentrations play an important role on the morphology and optical properties of ZnO nanostructures. The possible growth mechanism of the ZnO nanostructures was discussed.     

Preparation of nanocone ZnO thin film and its aging effect of photoluminescence

In this work, a nanocone ZnO thin film was prepared by electron beam evaporation on a Si (1 0 0) substrate. The structural properties of the film were investigated by X-ray diffraction (XRD), atomic force microscopy and laser Raman scattering, respectively. The aging effect of the nanocone ZnO thin film was studied by photoluminescence spectra. The structural analyses show that the prepared ZnO thin film has a hexagonal wurtzite structure and is preferentially oriented along the c-axis perpendicular to the substrate surface. The photoluminescence spectra show that with the increase of aging time, the green emission of the nanocone ZnO thin film gradually decreases while the ultraviolet emission somewhat increases. The reason for this phenomenon is likely that the green-emission-related oxygen vacancies in the film are gradually filled up. The Raman scattering analyses also suggest that the intensity of the Raman peak related to oxygen vacancies in the nanocone ZnO thin film declines after the film is aged in air for a year. Therefore, the authors think the green emission is mainly connected with oxygen vacancy defects.     

Effect of zinc sources on the morphology of ZnO nanostructures and their photoluminescence properties

The morphology and photoluminescence properties of ZnO nanostructures synthesized from deferent zinc sources by a vapor deposition process were investigated. The zinc sources involved pure zinc, ZnO, and ZnCO₃ powders, respectively. It was found that the zinc sources have a strong effect on the morphology of the ZnO nanostructures. For the pure zinc and ZnO sources, uniform ZnO nanowires and tetrapods are obtained, respectively. However, in the case of the ZnCO₃ source, the products are nanowire–tetrapod combined nanostructures, in which ZnO nanowires grow from the ends of tetrapod arms. The morphology differences of these products may be mainly concerned with the yield and constituents of the corresponding zinc vapor. Photoluminescence measurements show that the nanowires have a relatively stronger near-band UV emission than the other products. The strongest green-light emission from the tetrapods implies that more defects exist in the tetrapods. An evident peak at 430 nm is found in the spectrum of the nanowire–tetrapod combined nanostructures, which may be caused by oxygen-depletion interface traps. PACS 73.61.Tm; 81.10.Bk; 78.55.Et     

Enhancement of optical properties and donor-related emissions in Y-doped ZnO

The Zn_1−xY_xO nanoparticles with good optical properties have been prepared by sol–gel method. The yttrium doping effect on the structures and optical properties were investigated by XRD, SEM, XPS and low temperature photoluminescence. The UV emission intensity of yttrium doped ZnO was over 300 times stronger than that of pure ZnO, which was an exciting result in enhancing the ultraviolet near band edge emission in photoluminescence from ZnO nanoparticles. The UV emission band of doped ZnO nanoparticles exhibits a red shift from 388 to 398 nm, indicating a shallow energy level near valence band has been formed due to the yttrium doping into ZnO lattices. The defect-related band is suppressed (I_D/I_UV = 1–0.83) considerably in Zn_1−xY_xO nanoparticles, revealing the quenching of the broad yellow-orange emission. The doping effect on the optical properties is investigated by temperature dependent photoluminescence. The experimental results indicated that the donor level of yttrium is deeper than that of undoped ZnO.