Lyot filter based multiwavelength fiber ring laser actively mode-locked at 10 GHz using an electroabsorption modulator

A multiwavelength fiber ring laser comprising of a Lyot filter and hybrid gain medium is presented. A wavelength channel spacing of 100 GHz is achieved by appropriate tuning of the Lyot filter length. Four wavelength channels are simultaneously mode-locked at 10 GHz using an electroabsorption modulator. We highlight how the intra-cavity modulator can affect the stability of the mode-locked laser spectrum when used in conjunction with a Lyot filter. We show that, due its reduced polarization sensitivity, an electroabsorption modulator significantly improves the stability of the mode-locked laser spectrum when compared to using a Mach-Zehnder modulator.     

Tunable 12×10 GHz mode-locked semiconductor fiber laser incorporating a Mach-Zehnder interferometer filter

A stable multiwavelength mode-locked semiconductor fiber ring laser incorporating a fiber Mach-Zehnder interferometer (MZI) filter was proposed and experimentally demonstrated. A semiconductor optical amplifier (SOA) serves as an optically controlled mode-locking element due to gain exhaustion caused by external injected optical pulses. Another SOA severs as a constant-gain medium. A fiber MZI filter with a temperature control is incorporated into the fiber ring cavity to acquire a stable and tunable multiwavelength oscillation. Twelve wavelengths are synchronously mode-locked at 10 GHz, pulse width of mode-locked pulse are about 30 ps. Proposed multiwavelength mode-locked semiconductor fiber ring laser has some distinct advantages, such as simple and compact structure, easy integration, convenient tuning, good stability, potential high repetition rate operating, which has potential application in the future WDM communication system.     

Analysis of 160 Gb/s all-optical NRZ-to-RZ data format conversion using quantum-dot semiconductor optical amplifiers assisted Mach-Zehnder interferometer

A scheme of all-optical data format conversion from nonreturn-to-zero to return-to-zero is proposed using quantum-dot semiconductor optical amplifiers (QD SOAs) assisted Mach-Zehnder interferometer (MZI). The proposed scheme has the potential to operate at much larger bit rate ∼160 Gb/s, and the converted signal has a lower frequency chirp. 160 Gb/s all-optical format conversion is verified through numerical simulations, and the output contrast ratio and Q-factor are analyzed to evaluate the system performance. With properly selected parameters, the converted signal with a contrast ratio over 8 dB and a Q-factor over 8 can be achieved.     

Impact of extinction ratio of single arm sin LiNbO3 Mach-Zehnder modulator on the performance of 10 and 20 Gb/s NRZ optical communication system

We investigate the impact of extinction ratio of single arm sin² LiNbO₃ Mach-Zehnder (MZ) amplitude modulator on the performance of 10 and 20 Gb/s single-channel optical communication system. For different fiber lengths, the system performance has been analyzed with the increase in the extinction ratio. The effect of variation in dispersion parameter has also been illustrated. The impact of extinction ratio (ζ), dispersion parameter and length of the fiber has been further optimized with minimum bit error rate (BER) at optimal decision threshold (10⁻⁹) for 10 and 20 Gb/s bit rate. It is found that the system gives optimum performance at extinction ratio (ζ) value 20 dB. The increase in the transmission distance from 468 km for 10 Gb/s to 532 km for 20 Gb/s has been reported, and 8 dB improvement in the Q value has been observed as the value of ζ is increased from 10 to 20 dB. At 20 Gb/s, the system gives optimum performance for dispersion parameter value only up to 4 ps/nm km; however, at 10 Gb/s the system can operate for dispersion values up to 14.3 ps/nm km. Further we investigate the self-phase modulation (SPM) effect for the increase in the input power. It is observed that the SPM effect is negligible below 3 dB m input power and it increases at higher power levels.     

Novel tunable microwave photonic notch filter using a 3 × 3 coupler based Sagnac loop

We propose a simple and stable structure to realize a tunable negative coefficients microwave photonic notch filter. A 3 × 3 coupler based Sagnac loop interferometer with an asymmetrically placed phase modulator is used to acquire the notches. Our system is simply implemented and with good stability. Theoretical analysis and experimental results are presented and show a good agreement. The structure is proved to be a robust filter with more than 35 dB rejection deep notches.     

Operation of low driving voltage cascaded modulator over non-cascaded modulator for 4 dB extinction ratio at 100 giga bit per second (Gbps)

This paper describes improved results when comparing cascaded traveling wave electro absorption modulator (TWEAM) to non-cascaded TWEAM by simulation. Large signal modeling is used for both types of modulators to achieve 4 and 10 dB extinction ratios (ERs) with flat frequency response for applications in short distance as well as long distance optical fiber communication. To obtain 4 and 10 dB ERs with 110 GHz 3 dB bandwidth, a cascaded TWEAM requires 0.4 V peak to peak (V_P-P) and 1 V_P-P input driving voltages respectively. A non-cascaded TWEAM requires about two times the input driving voltage compared to the cascaded modulator to achieve the same values of ER and 3 dB bandwidth. Both modulators have been simulated with the same bias and also use the same circuit parameters except for the total active segment lengths (1 and 0.5 mm for cascaded and non-cascaded modulator respectively) and microstrip lengths to obtain the same ERs and 3 dB bandwidths.     

80 Gb/s All-optical logic AND operation using Mach-Zehnder interferometer with differential scheme

An all-optical logic AND gate is demonstrated by using a semiconductor optical amplifier (SOA) based Mach-Zehnder interferometer (MZI). The AND results are numerically analyzed by solving the rate equation of SOA. Q-factor values have been calculated. The operation of the AND logic gate is experimentally demonstrated at 80 Gb/s. Operation at higher data rates is feasible using SOAs with shorter phase recovery time.     

Tunable 19 × 10 GHz L-band FP-SOA based multi-wavelength mode-locked fiber laser

We present a multi-wavelength mode-locked fiber ring laser incorporating a semiconductor optical amplifier (SOA) and a Fabry-Perot semiconductor optical amplifier (FP-SOA). Because the gain of the SOA is depleted by an external injection optical signal, the SOA acts as a loss modulator. The FP-SOA serves as a tunable comb filter. The presented laser source can generate 19 synchronized wavelength channels with the extinction ratio of about 21 dB, each mode-locked at 10 GHz, and mode-locked pulse width is about 40 ps. Oscillation wavelengths band can be tuned by adjusting the bias current of the SOA, and wavelength spacing also can be changed by using a tunable optical delay line (ODL) or a temperature controller. The polarization-insensitive devices ensure that the output power is rather stable. This fiber laser has potential applications in longer waveband (L-band) within the low-attenuation window.     

用于光纤无线通讯的微环相位辅助型马赫-曾德尔调制器

针对光纤无线通信(ROF)系统对光强调制器线性度的特殊要求,设计了一种新型的集成光学器件——微环相位辅助型马赫-曾德尔调制器(RPAMZM)。将一个微环谐振器和一个相位调制器分别加载到马赫-曾德尔调制器的两臂,可以补偿普通马赫-曾德尔调制器的亚线性,得到线性度良好的响应特性。建立了该种器件的理论分析模型,计算了不同条件下的传输特性和无毛刺动态范围(SFDR)。分析结果表明,在不计损耗的情况下,器件的非线性主要来源于传输函数泰勒展式的三次项,通过控制透射系数,可以使该项等于零,无毛刺动态范围获得19.68 dB的提高;在损耗存在的情况下,通过控制透射系数和偏压因子,可以同时抑制掉二次和三次这两个主要的非线性项,无毛刺动态范围获得15.74 dB的相对改善。     

Microwave Photonic Link with Carrier Suppression for Increased Dynamic Range

Theoretical analysis and experimental investigation of microwave photonic links with bias-shifted Mach-Zehnder modulators are presented. An optical amplifier is used to increase link gain and reduce noise figure. The combination of modulator bias shift away from quadrature and optical amplification reduces the link noise figure by more than 15 dB. For modulation frequencies from 2 to 18 GHz, the third-order limited spurious-free dynamic range (SFDR3) of these links is greater than 120 dB, normalized to a 1-Hz bandwidth. Conventional links based on Mach-Zehnder modulators are limited to SFDR3 values of approximately 110 dB, normalized to a 1-Hz bandwidth. This level of performance is achieved without electronic or optical linearization.     

Design of a RF window for 170 GHz, 1 MW gyrotron for ECRH application

This paper describes the design of a large sized diamond window for 1 MW, 170 GHz gyrotron. The diameter and the thickness of the diamond window are 80 mm and 1.482 mm, respectively, whose edge is directly cooled by water. The CST microwave studio has been used for the S-parameter, and finite element analysis code ANSYS has been used for the thermal and the structural simulation. The return loss (S₁₁) and insertion loss (S₂₁) of the 170 GHz gyrotron window have been found −39.80 dB and −0.011 dB, respectively. The thermal and structural analysis of RF window the 397 K temperature at disk center and maximum displacement 0.01 mm has been found in the window disk during the thermal analysis.     

64 GHz optical millimeter-wave generation by octupling 8 GHz local oscillator via a nested LiNbO3 modulator

A novel scheme to generate a 64 GHz optical millimeter (mm)-wave via a nested LiNbO₃ Mach-Zehnder modulator with an 8 GHz local oscillator is proposed and simulated. Since the frequency response of the modulator and the local oscillator frequency are greatly reduced, the bandwidth requirements of the optical and electrical components in the transmitter are significantly decreased. The simulation results show that the generated optical mm-wave signal maintains good performance even after being transmitted over 20 km standard single-mode fiber.     

Parameter design and performance analysis of a ultrafast all-optical XOR gate based on quantum dot semiconductor optical amplifiers in nonlinear mach-zehnder interferometer

This paper presents the parameter design and performance analysis of a 160 Gb/s all-optical XOR gate based on cross-gain modulation (XGM) in a nonlinear Mach-Zehnder interferometer (MZI) with quantum dot semiconductor optical amplifiers (QD-SOAs). Detailed numerical simulations of the QD-SOA parameters and optical signal parameters are performed to elevate the gate performance. With the optimized parameters, a Q factor over 8 dB is obtained. The possibility of operating at higher speed of the XOR gate is demonstrated as well. The results will be helpful for the design and performance analysis of practical quantum dot devices.     

Skin-effect analysis of a shielded polymer Y-fed coupler electro-optic modulator over a wide bandwidth of 94 GHz

A novel technique and related formulations are proposed for analyzing the influences of the skin-effect on the performances of a polymer Y-fed coupler electro-optic modulator with shielded push-pull micro-strip electrodes. Using the extended point-matching method, coupled mode theory and electro-optic modulation theory, thorough design and optimization are performed. By introducing the effective applied voltage, formulas of the high-frequency response under skin-effect are deduced, and characteristics under skin-effect are analyzed. Under the central wavelength of 1550 nm, the half-wave voltage is as low as 1.097 V for the device with an active region length about 8.884 mm. Considering the influences of the skin-effect, the 3-dB modulating bandwidth of the microwave signal is up to 94 GHz. A high extinction ratio of more than 20 dB and a low insertion loss of less than 4.18 dB are achieved when the microwave frequency is below 68 GHz under skin-effect. This design technique is proven to be accurate by the comparison with the beam propagation method (BPM).     

Design of wide-spectrum polymer Mach-Zehnder interferometer electro-optic switches using two symmetric N-th order phase-generating couplers

To enlarge the output spectrum, a novel reasonable structure of one kind of Mach-Zehnder interferometer (MZI) electro-optic (EO) switches containing two symmetric N-th order phase generating couplers (PGCs) is presented, and thorough model, analysis and design technique are proposed. A non-linear least square method is investigated for optimizing the PGC structure to eliminate the phase difference error caused by the wavelength variation. Under the central wavelength of 1550 nm, optimization and simulation are performed on three MZI EO switches using two first, second and third order PGCs, respectively. The switches exhibit a low switching voltage of 1.156 V with an active region length of 4 mm. The output spectrums covering the whole S-C-L bands are as wide as 320, 390 and more than 435 nm, respectively, the insertion loss are less than 5.57, 5.98 and 7.90 dB, respectively, and the crosstalk is less than −30 dB over the wide wavelength ranges, for the three designed switches. The design technique is supported to be feasible by the comparison with beam propagation method (BPM).     

A novel full-duplex radio-over-fiber system based on dual octupling-frequency for 82 GHz W-band radio frequency and wavelength reuse for uplink connection

A novel full-duplex radio-over-fiber system is proposed and demonstrated, in which an external modulator and an optical interleaver are used to generate dual octupling-frequency optical millimeter waves for two base stations and wavelength reuse for uplink connection. This scheme is simplified and low-cost because no additional laser is utilized for uplink connection at two base stations and one laser at central office works for two base stations simultaneously. The frequency of local oscillator signal is reduced largely due to frequency octupling. The theorem about how to generate optical millimeter waves is analyzed. The simulation results show that the bidirectional 5 Gb/s system has a perfect performance because the power penalty for the downlink and uplink signals of two base stations are less than 0.6 dB after successful transmission over 60 km standard single mode fiber.     

Transmission performance of optical OFDM signals with low peak-to-average power ratio by a phase modulator

We have experimentally generated optical orthogonal frequency-division multiplexing (OOFDM) signals by a phase modulator (PM). The generated OOFDM signal can tolerant higher nonlinear effects in fiber than that generated by an intensity modulator because of its lower peak-to-average power ratio (PAPR). It is shown that, by using a PM, the PAPR of the OOFDM signal has a 2-3 dB reduction and the input power in fiber can be improved over 3 dB.     

A very compact Mach-Zehnder interferometer with left-handed material

A very compact Mach-Zehnder interferometer (MZI) composed of two parallel straight waveguides with left-handed material (LHM) layers is proposed. The operating principle and characteristics of the MZI with electro-optic material (EOM) core are analyzed by using the supermode theory and coupled mode theory. The result shows that regardless of material loss, a very compact MZI of only 0.87 mm × 0.022 mm can be achieved by utilizing EOM with ultrahigh electro-optic coefficient, which means a new way to fulfill a very compact electro-optic modulator or optical switch. The absorption effect of the proposed MZI is also analyzed by perturbation method which is generated by lossy LHM layers.     

High resolution analysis of the rotational levels of the (0 0 0), (0 1 0), (1 0 0), (0 0 1), (0 2 0), (1 1 0) and (0 1 1) vibrational states of SO2

A high resolution (0.0018 cm⁻¹) Fourier transform instrument has been used to record the spectrum of an enriched ³⁴S (95.3%) sample of sulfur dioxide. A thorough analysis of the ν₂, 2ν₂ − ν₂, ν₁, ν₁ + ν₂ − ν₂, ν₃, ν₂ + ν₃ − ν₂, ν₁ + ν₂ and ν₂ + ν₃ bands has been carried out leading to a large set of assigned lines. From these lines ground state combination differences were obtained and fit together with the existing microwave, millimeter, and terahertz rotational lines. An improved set of ground state rotational constants were obtained. Next, the upper state rotational levels were fit. For the (0 1 0), (1 1 0) and (0 1 1) states, a simple Watson-type Hamiltonian sufficed. However, it was necessary to include explicitly interacting terms in the Hamiltonian matrix in order to fit the rotational levels of the (0 2 0), (1 0 0) and (1 0 1) states to within their experimental accuracy. More explicitly, it was necessary to use a ΔK = 2 term to model the Fermi interaction between the (0 2 0) and (1 0 0) levels and a ΔK = 3 term to model the Coriolis interaction between the (1 0 0) and (0 0 1) levels. Precise Hamiltonian constants were derived for the (0 0 0), (0 1 0), (1 0 0), (0 0 1), (0 2 0), (1 1 0) and (0 1 1) vibrational states.