Fiber Bragg grating strain sensor based on fiber laser

A study on fiber Bragg grating (FBG) strain sensor, based on erbium-doped fiber (EDF) laser, is presented. A strain-sensing element, FBG, also acts as the lasing wavelength selecting component. When strain is applied on the FBG, the laser cavity loss changes, leading to a modification of the laser transient. Strain measurements are obtained in the time domain by simply measuring the EDF laser build-up time. Relative variation in the build-up time of up to 190%, for a strain range from 0 με to 2350 με, is achieved with a resolution corresponding to a strain of better than 2.35 με. This study demonstrates a novel fiber sensor concept and the technical feasibility to develop fiber strain measurement.     

Strain and temperature discrimination technique by use of A FBG written in erbium doped fiber

We propose and demonstrate strain and temperature discrimination technique using a single fiber Bragg grating (FBG) written in the core of an erbium doped fiber. We observed that amplified spontaneous emission power varying linearly from the erbium doped fiber with temperature which determines temperature changes and strain is estimated by subtracting the wavelength shift due to temperature change, from the measured shift corresponding to the dip in the transmission spectrum of the FBG. A simple and compact FBG sensor is presented with improved rms errors of 21.2 μ? and 1 °C over ranges of 0–800 μ? and 40–95 °C, respectively. The sensor is shown to have strain and temperature sensitivity of 0.8 pm/μ? and 12 pm/°C.     

Dynamic strain measurement using two wavelength-matched fiber Bragg grating sensors interrogated by a cascaded long-period fiber grating

In this work, we describe a fiber Bragg grating (FBG) sensing system using two wavelength-matched FBG sensors for static and dynamic strain measurement. A cascaded long-period fiber grating (CLPG)-based demodulation technique has been used to interrogate the two wavelength-matched FBG sensors. Experimental results of static strain measurement show that the proposed system has a strain resolution of 1 με. This system has also been used for dynamic strain measurement. An eddy current displacement meter-based system has been used as a comparison measurement. Experimental results of dynamic strain measurement have proved that the FBG sensing system has a good performance in the measurement of dynamic strain. The results of static and dynamic strain measurement indicate that the sensing system using two wavelength-matched FBG sensors is superior to the single FBG sensor system.     

Remote fiber sensor based on cascaded Fourier domain mode-locked laser

We propose a high-speed remote fiber Bragg grating (FBG) sensor interrogation system based on a 1.3-μm cascaded Fourier-domain mode-locked (FDML) laser. It consists of multiple FBGs connected to an optical circulator in the laser cavity. The cascaded FDML laser with these multiple FBGs is operational when the scanning frequency of the fiber Fabry-Perot tunable filter matches the fundamental frequency of the laser cavity. Each FBG provides a separate laser cavity for the FDML laser. The scanning frequencies of each laser cavity are 30.5314, 31.5393, 32.7108, and 33.8023 kHz. Using the cascaded FDML laser, we measure the performance of the long-distance static strain FBG sensor interrogation system in both the time and spectral domains. The slope coefficients of the measured relative wavelength difference and the relative time delay from the static strain are found to be 0.95 pm/μstrain and 0.15 ns/μstrain, respectively. We also demonstrate the dynamic response of the interrogation system with 80-Hz modulation strain using the cascaded FDML laser. Thus, an FBG sensor interrogation system for high-speed and high-sensitivity long-distance monitoring systems can be realized using a cascaded FDML laser.     

Integration of miniature Fabry-Perot fiber optic sensor with FBG for the measurement of temperature and strain

A sensor has been fabricated by the integration of a fiber Bragg gating sensor (FBGs) with a fiber Fabry-Perot (F-P) sensor fabricated by etching method. In the integrated sensor, the FBG was used to measure temperature, while the fiber Fabry-Perot interferometer sensor (FFPIs) was used for strain measurement. Wavelength decoding for FBG and peak tracking for FFPI was employed for demodulation, respectively. The result showed that the temperature and strain sensitivity for the integrated sensor is ~ 2.7 pm/μεand ~ 9.3 pm/°C, respectively.     

Study and design of a low cost optical pickup based on double FBGs

A fiber Bragg grating (FBG) pickup exploiting Intensity Modulation-Direct Detection (IM-DD) interrogation system was put forward in this paper. The feasibility of detecting the vibration of the guitar was revealed by FFT analysis. There was certain correlation between the FBG pickup and the magnetic pickup. A high signal-to-noise ratio (42.85 dB) was obtained. The FBG pickup has a frequency response range (0–3000 Hz) that is comparable to the reference pickup. The results indicated that the proposed pickup is effective to pick up the vibration. A simple structure design and low-cost interrogation system set-ups were proposed.     

High resolution temperature insensitive interrogation technique for FBG sensors

In this letter, we propose a high resolution temperature insensitive interrogation technique for FBG sensors where one FBG acts as an edge filter to interrogate a separate FBG sensor. A high resolution of better than 5 με in strain measurement range from 0 to 1100 με and the best resolution of better than 1 με were verified by experiments. An error of only ±2.2 με is achieved over a temperature range from 15 to 50 °C, indicating that this strain interrogation technique is temperature insensitive. Using an altered system configuration, the temperature was also measured simultaneously with a resolution better than 0.2 °C.     

Ultrahigh-channel-count fiber Bragg grating based on the triple sampling method

A triple sampling method to have enabled excellent channel uniformity and high in-band energy efficiency is firstly proposed for the design of an ultrahigh-channel-count fiber Bragg grating (FBG), which is based on the simultaneous utilization of two amplitude-assisted phase sampling (AAPS) functions and a phase-only sampling (POS) function. As an example, one linearly chirped FBG with consecutive 1215 channels enabling to cover all fiber telecom bands (O + E + S + C + L + U) is numerically demonstrated, which has a length of 9 cm, a dispersion of − 1360 ps/nm, and a channel spacing of 50 GHz. The maximum index-change required for 10 dB strength of the FBG is less than 6 × 10^− 3.     

A novel fiber Bragg grating high-temperature sensor

A novel fiber Bragg grating (FBG) sensor for the measurement of high temperature is proposed and experimentally demonstrated. The interrogation system of the sensor system is simple, low cost but effective. The sensor head is comprised of one FBG and two metal rods. The lengths of the rods are different from each other. The coefficients of thermal expansion of the rods are also different from each other. The FBG will be strained by the sensor head when the temperature to be measured changes. The temperature is measured basis of the wavelength shifts of the FBG induced by strain. A dynamic range of 0–800 °C and a resolution of 1 °C have been obtained by the sensor system. The experiment results agree with theoretical analyses.     

Simultaneous measurement of curvature and temperature based on PCF-based interferometer and fiber Bragg grating

A sensor head consisting of a photonic crystal fiber (PCF)-based Mach-Zehnder interferometer (MZI) and a fiber Bragg grating (FBG) is proposed and experimentally demonstrated for simultaneous measurement of curvature and temperature. The MZI fabricated by splicing a short length of PCF between two single-mode fibers with the air-hole structure that completely collapsed near the splicing points, is sensitive to fiber bending and surrounding temperature, while the FBG is only sensitive to the later. Simultaneous measurement of curvature and temperature is therefore obtained. Sensitivities of 4.06 nm/m^− 1 and 6.30 pm/°C are achieved experimentally for curvature and temperature, respectively. And the corresponding resolutions are 5.2 × 10^− 4 m^− 1 and 1.25 °C for curvature and temperature, respectively, based on the wavelength measurement resolution of 10 pm.     

A planar lightwave circuit based micro interrogator and its applications to the interrogation of multiplexed optical fiber Bragg grating sensors

Optical fiber Bragg grating sensors have found potential applications in many fields, but the lack of a simple, field deployable and low cost interrogation system is hindering their deployment. To tackle this, we have developed a micro optical sensor interrogator using a monolithically integrated planar lightwave circuit based echelle diffractive grating demultiplexer and a detector array. The design and development of this device are presented in this paper. It has been found that the measurement range of this micro interrogator is more than 25 nm with better than 1 pm resolution. This paper also reports the applications of the micro interrogator developed to the monitoring of commercial optical fiber Bragg grating (FBG) temperature sensors and mechanical sensors. The results obtained are very satisfactory and in some cases, they are better than those obtained using commercial bench top lab equipment.     

Comparison of single and double cladding long period fiber grating sensor using an intensity modulation interrogation system

The performance of long period fiber grating (LPFG) sensors written in single cladding and double cladding fibers have been compared by using a fast responding interrogation system based on intensity modulation. Temperature and dynamic strain monitoring using this system have been demonstrated. This system is capable of resolving strain to 0.2 and 0.4 με at a loading frequency of 20 Hz, and temperature resolution to 0.02 and 0.19 °C by using LPFG in the single cladding (SC-LPFG) and double cladding (DC-LPFG), respectively.     

A lasing wavelength stabilized simultaneous multipoint acoustic sensing system using pressure-coupled fiber Bragg gratings

A fiber Bragg grating (FBG) sensor head, using a pressure coupling mechanism, was designed for broadband frequency response and structural strain-free characteristic. The pressure-coupled sensor heads were connected to a simultaneous multipoint acoustic sensing system based on a tunable laser. An intelligent lasing wavelength stabilization algorithm capable of identifying the direction of spectrum movement, the wavelength shifting speed, and a fiber bending event was developed so that the simultaneous multipoint acoustic sensing system could be used in environments with rapid temperature variations. The lasing wavelength feedback control algorithm updated the lasing wavelength into the steep slope of the FBG spectrum even under conditions of rapid temperature change. The averaging lasing wavelength updating time was only 21 s because the system can decide a minimal size in scan window by finding the FBG spectrum shifting speed and direction in real time. The system was able to update the lasing wavelength which missed the steep slope of the FBG spectrum under maximum temperature variation rates 0.3014 and −0.3246 °C/s. The proposed system detected simultaneous impact waves at multiple points under conditions of rapid temperature change and change in dynamic strain.     

Fiber optic Fabry-Perot pressure sensor with low sensitivity to temperature changes for downhole application

Pressure and temperature are two important parameters in reservoir engineering. The fiber optic sensors can be used for permanent downhole monitoring. In this paper, we propose an extrinsic fiber Fabry-Perot interferometer (EFPI) sensor for pressure measurement with low sensitivity variation. The pressure sensitivity of EFPI sensor and of the fiber Bragg grating (FBG) sensors have been measured. The experimental pressure sensitivity for EFPI and FBG sensors are measured to be 2.75 × 10⁻⁸ 1/kPa and 1.52 × 10⁻⁸ 1/kPa, respectively. The temperature cross-sensitivity problem of the EFPI sensor has been solved by a new technique. The temperature sensitivity of EFPI sensor has been decreased to 1.2 × 10⁻⁶/°C, while the temperature sensitivity of non-compensated EFPI sensor has been measured to be 16.4 × 10⁻⁶/°C. The results show that the EFPI sensor has a higher pressure sensitivity and good capability to decrease temperature sensitivity in comparison to FBG sensor.     

Simultaneous measurement of refractive index and temperature using dual-period grapefruit microstructured fiber grating

By cascading the long period fiber grating (LPFG) and fiber Bragg grating (FBG) in grapefruit microstructured fiber, a novel dual-period fiber grating sensor is proposed. The refractive index and temperature are measured simultaneously by using the different sensitivity of FBG and LPFG. The relationship between dual-period fiber grating transmission spectrum and refractive index, resonant wavelengths and temperature are analyzed theoretically, respectively. The simulation results show that the accuracy of the sensor in measuring refractive index and temperature is estimated to be 2319.6 nm/RIU in a range from 1.33 to 1.36 and 0.017 nm/°C from 0 °C to 100 °C, respectively. Thus, the sensor has high refractive index sensitivity, and can provide the theoretical foundation for the optical fiber biosensor.     

A cheap and practical FBG temperature sensor utilizing a long-period grating in a photonic crystal fiber

A whole temperature sensor in one package utilizing a fiber Bragg grating (FBG) made in a conventional single-mode fiber and which uses a long-period grating (LPG) made in a photonic crystal fiber is proposed and experimentally demonstrated. The function of the interrogation is that the wavelength change of the FBG with environmental temperature is transferred to the intensity of the output via the LPG. Utilizing the temperature-insensitivity of the LPG in the PCF, the interrogation is stable and enables a cheap and practical temperature measurement system with a wide dynamic range.     

A linearity interrogation technique with enlarged dynamic range for fiber Bragg grating sensing

An exact linearity interrogation technique with enlarged dynamic range for fiber Bragg grating (FBG) sensor has been analyzed theoretically and demonstrated experimentally. The technique bases on two matched FBGs for receiving the reflected signal from the sensor FBG and two photodiodes (PDs) for collecting the reflected signal from the two receiver FBGs. The linear expression between the nature logarithm of the output ratio of the two PDs and Bragg wavelength of the sensor FBG is obtained on the condition that the bandwidths of the two receiver FBGs being equal to each other. The wavelength of the sensor FBG can be interrogated simply and accurately by the linearity technique according to the expression. In addition, a new tunable paralleled matched gratings interrogation scheme is proposed. The interrogation range can be enlarged and multiple FBG sensors can be interrogated simultaneously with the tunable interrogation scheme.     

Simultaneous strain and temperature measurement based on a photonic crystal fiber modal-interference interacting with a long period fiber grating

An alternative all-fiber sensor for simultaneous strain and temperature measurement based on a photonic crystal fiber (PCF) spliced between single-mode fibers cascaded with a long period grating (LPG) is proposed. By collapsing the air holes at two splicing regions along the PCF, a simple but effective modal-interference (MI) is occurred between the core and cladding modes of the PCF. Due to the different responses on the changes of strain and temperature on the MI and the cascaded LPG, the strain and temperature can be measured simultaneously. Experimental results show that the sensing resolution of 9.1 με in strain measurement is experimentally achieved over a range of 2640 με, while the temperature sensing resolution is 0.27 °C within a range of 30-100 °C.     

The ultra narrow-band fiber grating filter

In this paper, we propose an ultra narrow band fiber grating filter which is composed of two optical circulators and two fiber Bragg gratings (FBG). Through numerical simulation and experiment investigation, a narrow-band output spectrum with 1064 nm center wavelength and 0.017 nm bandwidth is obtained. It may find a certain application in the fields of free space optic communication, laser tuning and so on as we believe.     

Elimination of environmental noise in interferometric wavelength shift demodulation for dynamic fiber Bragg grating sensor array

We present a novel reference compensation method for eliminating environmental noise in interferometric wavelength shift demodulation for dynamic fiber Bragg grating (FBG) sensors. By employing a shielded wavelength-division-multiplexed reference FBG in the system, the environmental noise is measured from the reference channel, and then subtracted from the demodulation result of each sensor channel. An approximate 40 dB reduction of the environmental noise has been experimentally achieved over a frequency range from 20 Hz to 2 kHz. This method is also suitable for the elimination of broadband environmental noise. The corresponding FBG sensor array system proposed in this paper has shown a wavelength resolution of .