Band gap structure of disordered chiral photonic crystals

Based on the non-symmetric transmission-line method, the band gap structure of disordered chiral photonic crystals (CPC) has been investigated. The influence of the chiral parameters, the disorder, the periods and the refractive index on the band gap structure has been discussed. It is found that the photonic band gap (PBG) in CPC is more obvious than that in the conventional photonic crystals, and the PBG can be increased by increasing the periods or the contrast of the refractive index of the two media. It is also found that the existence of disorder will influence the band edge of the PBG, and such influence will increase with the increment of periods or the contrast of the refractive index of the two media.     

Photonic band gap failure in photonic crystal devices

The photonic crystal is an artificial material with periodic dielectric constant and the key factor to preserve their band features is its periodicity. When the number of periods of photonic crystal is decreased the photonic band gap cannot prevent the light of the corresponding frequencies from propagating in photonic crystal, in another word, photonic band gap will be failure. The minimum periods of photonic crystal device which can keep photonic band gap effective in miniaturization process is analyzed, the transmittance spectrum is calculated by the Finite-difference time-domain algorithm (FDTD) [1], the minimum periods is got in the simulation and the reason which affects the minimum periods is analyzed in this paper.     

Numerical analysis of a temperature sensor based on the photonic band gap effect in a photonic crystal fiber

In this paper we investigate, by the plane wave expansion method and an analytical model, the temperature effect on the photonic band gap fiber, and we report on a numerical demonstration of a temperature sensor based on the photonic band gap (PBG) shift in a solid core photonic crystal fiber (PCF) infiltrated with a high refractive index oil. The bandwidth and the position of the central wavelength of the band gap are the parameters of interests for our temperature sensing purpose. Simulation results were found to be in excellent agreement with the refractive index scaling law and the highest sensitivity of 3.21?nm/°C was achieved, and it will be even higher than the grating based sensors written in PCFs with similar structure.     

一维Al/SrF2低温超导体-电介质光子晶体能带结构

基于二流体电子模型和平面波展开法,计算了一维Al/SrF2超导体-电介质光子晶体的能带结构.结果表明:随着超导层厚度的增加,第一光子带隙中心频率和截止频率均发生蓝移,且第一带隙宽度逐渐增加到一个峰值后又逐渐变窄.更重要的是,在低于临界温度的超低温环境中,温度的微小变化,对该类光子晶体的带隙宽度、中心频率以及截止频率均有...     

Band structure of photonic crystal fibers with silica rings in triangular lattice

The characteristics of the cladding band structure of air-core photonic crystal fibers with silica rings in triangular lattice are investigated by using a standard plane wave method. The numerical results show that light can be localized in the air core by the photonic band gaps of the fiber. By increasing the air-filling fraction, the band gap edges of the low frequency photonic band gaps shift to shorter wavelength, whereas the band gap width decreases linearly. In order to make a specified light fall in the low frequency band gaps of the fiber, the interplay of the silica ring spacing and the air-filling fraction is also analyzed. It shows that the silica ring spacing increases monotonously when the air-filling fraction is increased, and the spacing range increases exponentially. This type fiber might have potential in infrared light transmission.     

Analysis of photonic band gaps in a two-dimensional photonic crystal with centrifugal core-shell rods

The absolute photonic band gap (PBG) in two-dimensional (2D) photonic crystal with excentric core-shell rods is studied in this paper. The core rod shifts away from the core-shell rod center, and its position is decided by two new introduced parameters — the shift angle θ and the offset ρ. We use the FDTD algorithm to calculate the photonic bands of the photonic crystal, and analyze how the offset and shift angle affect the photonic bang gap of excentric core-shell photonic crystal for different core rod size. It has been shown that the variation of the photonic band gap is quite peculiar.     

Novel optical modulator using silicon photonic crystals

We propose a novel compact and integrated optical modulator, which consists of p–i–n silicon photonic crystals with triangular lattice and a line defect waveguide. The device operation is based on a dynamic shift of the photonic band gap (PBG), which induced change in the silicon refractive index by the free carrier injection. We have numerically analyzed and investigated its light modulation performance by using plane wave expansion (PWE) method and finite-difference time-domain method. With small size, rapid response time and high extinct ratio, the designed optical modulator can be used in photonic integrated circuits.     

Spectral narrowing and lasing threshold in self-assembled active photonic crystal

Laser-induced emission from rhodamine-B dye embedded in pseudo band gap opaline photonic crystals is discussed. The photonic crystals are fabricated using rhodamine-B doped polystyrene colloids and show 65% reflectance at the stop band centered at 604 nm. The reflectance of the crystal is increased to 74% by coating with a thin layer of gold. Both spontaneous and stimulated emissions of the dye are observed in the photonic stop band environment by exciting the crystal with the second harmonic (532 nm) of a Q-switched Nd:YAG laser. The thin layer of gold functioned as a high reflecting end mirror to the dye-doped cavity when the crystal is pumped from the substrate side. Angle-dependent suppression at the stop band wavelength is observed in the spontaneous emission of the dye. Spectrally narrow stimulated emission and lasing is achieved in the gold coated dyed PhC at a threshold pump power of 60 mW in a selective direction of 22° from the direction of excitation. By studying emission from several photonic crystals with different number of layers, it is concluded that a sharp threshold for lasing is not observed in uncoated photonic crystals when they contained fewer than 30 ordered layers and lesser than 70% reflectance.     

Modelling and design of complete photonic band gaps in two-dimensional photonic crystals

In this paper, we investigate the existence and variation of complete photonic band gap size with the introduction of asymmetry in the constituent dielectric rods with honeycomb lattices in two-dimensional photonic crystals (PhC) using the plane-wave expansion (PWE) method. Two examples, one consisting of elliptical rods and the other comprising of rectangular rods in honeycomb lattices are considered with a view to estimate the design parameters for maximizing the complete photonic band gap. Further, it has been shown that complete photonic band gap size changes with the variation in the orientation angle of the constituent dielectric rods.      

Effect of the dielectric background on dispersion characteristics of metallo-dielectric photonic crystals

We theoretically study the effect of the dielectric background in two-dimensional metallo-dielectric photonic crystals. The metallo-dielectric photonic crystal consists of a square lattice of circular metallic rods embedded into a dielectric background. We calculate the photonic band structure by means of the plane wave method and the frequency-dependent finite-difference time-domain method. The transfer matrix method is used to obtain the reflectivity characteristics. Results show that the band structures shift toward lower frequencies and become flatter when the background dielectric constant increases. In addition, degeneracy can be broken and new gaps can be created in function of the dielectric background. We also found that the relative band gap width Δω/ω_g grows with increasing background dielectric constant and widths as large as 42.3% and 13.8% for the second and third band gaps can be achieved for ε_b = 9. We have investigated the origin of the new gap in these structures by studying the electric-field distribution at the band edges for the first five modes.     

Branching features of photonic bandgaps in Fibonacci dielectric heterostructures

We propose branching features of photonic band gaps in one-dimension Fibonacci dielectric heterostructures with arbitrary generation orders and thicknesses based on the gap map diagram, which is determined by the band edge formalism to avoid numerical instability. We find that the gap map diagram can be divided by the half-wave lines into several regions, each of which has similar gap pattern. The branching rules including the existence condition and the frequency range of each major gap as well as the number of all minor gaps in each region for systems with arbitrary thicknesses and generations are proposed. The number of major gaps in each region for the Fibonacci systems equals two rather than one for traditional binary layers. Moreover, the conditions of maximum gapwidth for the Fibonacci systems are not near the quarter wavelength, although the ones for traditional binary layers are at the quarter wavelength.     

Defect and dope selective of transmission properties of 2D photonic crystal

The effects of the defect and doping on the transmission properties are investigated in two-dimensional photonic crystal (PC) with triangular rods using the finite difference time domain (FDTD) method. The results show that the width and the central position of the photonic band gap (PBG) depend on the thickness of rods with defect or composite-defect, and the refractive index of doped dielectric rods. The transmission properties of composite-defect combined with doping are further investigated. The thinner the nested concentric triangular rod and the smaller the refractive index is, the wider the band gaps is.     

基于横向磁光效应磁化等离子体光子晶体的光子带隙特性

通过外加与电磁波传播方向垂直的磁场来调控等离子体光子晶体的光子带隙结构。采用时域有限差分方法数值分析了由本征层为等离子体层和其他电介质材料层交替堆叠而成的磁化等离子体光子晶体的光子带隙结构和频谱特性。数值结果表明,光子晶体中等离子体的介电常数随着外磁场大小的变化而改变,从而使磁化等离子体光子晶体的带隙特性在一定的频率范围相应地得到调节。     

Light propagation in photonic crystal with gain: Applicability of the negative loss approximation

The applicability of the concept of permittivity with Im ?_gain < 0 to describe the light propagation in a metamaterial system with gain is discussed using the example of a 1D photonic crystal containing gain layers. It is shown that this approach is in agreement with the principle of causality, unless lasing is present. Though the lasing process itself requires nonlinear analysis, the lasing threshold can be determined by linear (negative loss) approximation. Connecting the onset of lasing with the passage of the transfer function pole into the upper half-plane of the complex frequency, we show that (i) if the pump frequency lies in a pass band then an increase in the number N of elementary cells will sooner or later lead to lasing; (ii) if the frequency of the pump lies in the band gap, then lasing at band gap frequencies may occur in a sample with a low N before the band gap has been formed. Nevertheless, lasing will be necessarily suppressed by a further increase in N. In any case, for sufficiently large number of layers due to a finite line width of ?_gain(ω), lasing appears in the pass band even if the pump frequency is in the band gap.     

Terahertz modulator using photonic crystals

In this letter, a novel terahertz wave modulator based on a silicon oxide/polyaniline photonic crystal is proposed. The modulation mechanism of the novel modulator is based on a dynamic shift of the photonic band gap by the applied external electric field. Its performances were investigated with the finite-difference time-domain method. The novel modulator has 3 dB modulation bandwidth of 10 kHz, a size as small as 20 mm and its extinction ratio larger than 30 dB at the frequency of 1 THz.     

Control of photonic band gaps in one-dimensional photonic crystals

The photonic band gaps in one-dimensional photonic crystals (PCs) are theoretically investigated. A new method to broaden the photonic band gaps is introduced. Based on the similar method, a kind of photonic crystals is constructed to generate photonic band gaps with proportioned central frequencies. This technology can be used for designing nonlinear PCs for harmonic generation.     

基于法拉第效应磁化等离子体光子晶体FDTD分析

通过增加外磁场来调控等离子体光子晶体的光子带隙结构,采用时域有限差分算法分析了由本征层为磁化等离子体层和其他电介质材料层交替堆叠而成的磁化等离子体光子晶体的光子带隙结构,数值模拟中采用完全匹配层吸收边界条件以防止边界的反射。由于外磁场的法拉第磁光效应,使等离子体的介电常数随着外磁场的变化而改变。数值结果表明,等离子体光子晶体的带隙特性在一定的频率范围相应地得到调节,实现了频率低于等离子体频率的电磁波也能在等离子体中传播。     

���ڷ�����ЧӦ�Ż�����������Ӿ���FDTD����

通过增加外磁场来调控等离子体光子晶体的光子带隙结构,采用时域有限差分算法分析了由本征层为磁化等离子体层和其他电介质材料层交替堆叠而成的磁化等离子体光子晶体的光子带隙结构,数值模拟中采用完全匹配层吸收边界条件以防止边界的反射。由于外磁场的法拉第磁光效应,使等离子体的介电常数随着外磁场的变化而改变。数值结果表明,等离子体光子晶体的带隙特性在一定的频率范围相应地得到调节,实现了频率低于等离子体频率的电磁波也能在等离子体中传播。     

Lateral shifting in one dimensional chiral photonic crystal

We report the lateral shifts of the transmitted waves in a one dimensional chiral photonic crystal by using the stationary-phase approach. It is revealed that two kinds of lateral shifts are observed due to the existence of cross coupling in chiral materials, which is different from what has been observed in previous non-chiral photonic crystals. Unlike the chiral slab, the positions of lateral shift peaks are closely related to the band edges of band gap characteristics of periodic structure and lateral shifts can be positive as well as negative. Besides, the lateral shifts show a strong dependence on the chiral factor, which varies the lateral shift peaks in both magnitudes and positions. These features are desirable for future device applications.     

Photonic band gap engineering in 2D photonic crystals

The polarization-dependent photonic band gaps (TM and TE polarizations) in two-dimensional photonic crystals with square lattices composed of air holes in dielectric and vice versa i.e., dielectric rods in air, using the plane-wave expansion method are investigated. We then study, how the photonic band gap size is affected by the changing ellipticity of the constituent air holes/dielectric rods. It is observed that the size of the photonic band gap changes with changing ellipticity of the constituent air holes/dielectric rods. Further, it is reported, how the photonic band gap size is affected by the change in the orientation of the constituent elliptical air holes/dielectric rods in 2D photonic crystals.