高温光子晶体光纤温度传感器

针对大于500℃的高温环境,提出了一种可用于高温温度测量的高温光子晶体光纤(PCF)温度传感器。在光子晶体光纤末端熔接一段纯石英无芯光纤构成外腔式光纤法珀腔(EFPI)结构。纯石英无芯光纤在高温下的热膨胀和热光效应使得EFPI的光学腔长发生变化。结合光纤白光干涉测量技术,通过测量EFPI的腔长得到被测温度。在不同温度环境下,对腔长为175μm的EFPI光纤温度传感器进行连续测量。测量结果显示,设计的高温光纤温度传感器在27~1100℃范围内,腔长-温度三阶拟合精度达到99.95%,腔长-温度灵敏度为(0.851+0.0023T-0.000000957T2)nm/℃,其中在1100℃时,温度测量分辨率为0.225℃。     

Lensed photonic crystal fiber obtained by use of an arc discharge

A lensed photonic crystal fiber (PCF) is proposed as an effective element for an optical free-space interconnector. By simultaneously forming a beam-expansion region and a focusing lens on a single piece of PCF, effective coupling between PCFs could be achieved. A long working distance of up to 1 mm with wide longitudinal and lateral tolerances was measured. The optical characteristics of the lensed PCFs and the connectors made from them are analyzed experimentally and theoretically.     

Generation of a compact high-power high-efficiency normal-dispersion pumping supercontinuum in silica photonic crystal fiber pumped with a 1064-nm picosecond pulse

Broadband normal dispersion pumping supercontinuum （SC） generation in silica photonic crystal fiber （PCF） is investigated in this paper. A 1064-nm picosecond fiber laser is used to pump silica PCF for the SC generation. The length of PCF is optimized for the most efficient stimulated Raman scattering process in the picosecond pump pulse region. The first stimulated Raman Stokes peak is located in the anomalous dispersion regime of the PCF and near the zero dispersion wavelength; thus the SC generation process can benefit from both a normal dispersion pumping scheme and an anomalous dispersion pumping scheme. The 51.7-W SC spanning from about 700 nm to beyond 1700 nm is generated with an all-fiber configuration, and the pump-to-SC conversion efficiency is up to 90%. In order to avoid the output fiber end face damage and increase the stability of the system, an improved output solution for the high power SC is proposed in our experiment. This high-efficiency near-infrared SC source is very suitable for applications in which average output power and spectral power density are firstly desirable.     

Room temperature multiwavelength erbium-doped fiber ring laser using a highly nonlinear photonic crystal fiber

A multiwavelength laser source is demonstrated with a high power erbium-doped fiber amplifier as the gain medium. A highly nonlinear photonic crystal fiber (PCF) is inserted in the ring cavity to provide nonlinear gain by four-wave mixing. A Sagnac loop is incorporated in the ring cavity serving as a comb-like multichannel filter. The comparison between fiber ring laser without PCF and with PCF shows that the highly nonlinear PCF can generate a larger number of excited wavelengths and help stabilize the output power.     

宽带色散补偿光子晶体光纤的设计与优化

提出了一种新型的宽带色散补偿光子晶体光纤。通过增大光子晶体光纤(PCF)包层第一环空气孔半径r1,同时优化孔间距和包层其它环空气孔,在1550nm波长处获得了低至-1906.4ps/nm/km的负色散值。针对常规单模光纤的色散特性,设计出了宽带色散补偿光子晶体光纤,可补偿23倍长度的常规光纤,补偿的带宽达330nm,这在WDM系统中对多个信道同时进行色散补偿具有非常重要的意义。     

一种新型高双折射光子晶体光纤

提出了一种新的高双折射光子晶体光纤结构.应用全矢量频域有限差分方法所做的数值分析表明：该结构光纤基模的两个正交偏振态不再简并，其模式呈现很强的线偏振特性,并且模式双折射与结构参数设置有密切关系.通过选择合适的结构参数，可以使之达到10^-2量级，比传统的D型和熊猫型保偏光纤高出2个数量级.合理设计光纤包层的几何结构，可以取得理想的色散效果.这种结构的光子晶体光纤可用于制作具有适当色散特性或偏振特性的保偏光纤及相关光纤器件. 关键词： 光子晶体光纤 模式双折射 偏振特性 频域有限差分法     

Visible continuum generation using a femtosecond erbium-doped fiber laser and a silica nonlinear fiber

Supercontinuum extending to visible wavelengths is generated in a hybrid silica nonlinear fiber pumped at 1560 nm by a femtosecond, erbium-doped fiber laser. The hybrid nonlinear fiber consists of a short length of highly nonlinear, germano-silicate fiber (HNLF) spliced to a length of photonic crystal fiber (PCF). A 2 cm length of HNLF provides an initial stage of continuum generation due to higher-order soliton compression and dispersive wave generation before launching into the PCF. The visible radiation is generated in the fundamental mode of the PCF.     

Solid-core photonic crystal fiber as a Raman spectroscopy platform with a silica core as an internal reference

We show that solid-core photonic crystal fiber (PCF) is a promising platform for evanescent-field Raman spectroscopy of low-volume analytes. The Raman peak ratio of a silica core as a background to acetonitrile solution as analyte contained in the air holes maintains a constant value despite varying laser power and fiber length in a set of measurements. The Raman signal from the silica core can be used to eliminate the need to account for the coupling losses. These results demonstrate the feasibility of quantitative measurements using PCF as a Raman platform with silica as an internal reference. In addition, integrated Raman intensity increases with the length of the PCF due to long path length of light.     

Effect of doped fiber length on the stretch pulses of a mode-locked erbium-doped fiber laser

A passively self-starting mode-locked fiber ring laser is demonstrated using a highly concentrated Erbium doped fiber (EDF) with a saturable absorber. The effect of EDF length on the performance of the laser is investigated. Stable stretched pulses are obtained at wavelength region of 1560nm with a repetition rate ranging from 10.1 to 12.1 MHz and a pulse width stretching from 0.52 to 0.75 ps as the EDF length is reduced from 4.5 to 1.5 m. The repetition rate goes higher as the cavity length decreases when a shorter EDF is used but the pulse width reduces as the EDF length increases since the total group velocity dispersion (GVD) in the cavity is close to zero. The article is published in the original.     

环形光子晶体光纤中涡旋光的传输特性研究

由于涡旋光具有轨道角动量,将它应用于光纤通信领域可以有效提高信息传输速率.设计了一种环形光子晶体光纤,利用COMSOL Multiphysics软件对其涡旋光TE01,HE±21和TM01模式特性进行模拟计算,它们之间有效折射率差分别为4.59×10~(-4)和3.62×10~(-4);其中,TE01模式的涡旋光在入射光波长范围为1650—1950 nm时,色散值在44.18—45.83 ps·nm~(-1)·km~(-1)之间平坦;入射光波长在1550 nm时,TE01模式的涡旋光的非线性系数为1.37 W~(-1)·km~(-1).该结构的光子晶体光纤的涡旋光具有损耗小、色散平坦等特性,对光纤中传输涡旋光、将涡旋光应用于超连续谱等方面的研究具有重要意义.     

Two-pump fiber optical parametric amplifiers using optimized photonic crystal fiber by genetic algorithm

In this paper, we investigate the gain spectra of fiber optical parametric amplifiers (FOPAs) consisting of dispersion-flattened fibers (DFFs) with different dispersion curves comparatively by means of the dispersion curve model of the DFFs. It is demonstrated that the broader gain spectrum of FOPAs can be achieved if the dispersion curve is lower and more flattened. Based on the preceding analyses, we propose to constitute FOPAs by using index-guiding photonic crystal fiber (PCF) with an anticipated ultra-flattened dispersion and ultra-low dispersion slope. The as-proposed PCF had different air-holes in the cladding rings. In total, four parameters of the PCF are optimized by using genetic algorithm. PACS 42.81.-i; 42.65.Hw; 42.65.Yj     

Slow-light delay enhancement in small-core pure silica photonic crystal fiber based on Brillouin scattering

We demonstrate that we realize large-delay slow light based on stimulated Brillouin scattering in a short length of our fabricated small-core photonic crystal fiber (PCF). The cavity effect from the partially reflective splices in the end of the PCF enhances slow-light delay significantly. Our experiments show that large slow-light delay can be easily realized in a very short length of the PCF with a moderate pump power. Up to a one-half pulse-width delay is achieved in only 50 m of PCF in a single pump segment.     

Actively mode-locked fiber ring laser based on photonic crystal fiber

A wavelength tunable, high repetition rate mode-locked fiber ring laser was demonstrated. In the experiment, photonic crystal fiber (PCF) is used as an intracavity compression medium. The high nonlinearity and anomalous dispersion of PCF can cause intracavity compression and result in significant reduction in the pulse width. The pulses duration at the repetition rate of 9.99 GHz was less than 10 ps over the range of 1532-1565 nm.     

全波段正常色散光子晶体光纤中超连续谱的产生

设计了一种铅硅酸盐SF57 材料的光子晶体光纤, 利用有限元法数值模拟了该光纤的 色散特性. 研究结果显示在整个透明波段光纤具有正常色散. 利用自适应分布傅里叶法求解非线性薛定谔方程, 对中心波长为1550 nm, 初始脉宽为150 fs 的脉冲在该光纤中传输进行了模拟, 获得了关于入射脉冲中心波长对称的展宽范围超过了600 nm 的超平坦连续光谱, 并且光谱具有极其稳定和 相干的特性. 关键词： 光子晶体光纤 超连续谱产生 正常色散     

用157 nm激光制作的光子晶体光纤法布里-珀罗传感器

157nm准分子激光用于微加工具有单光子能量高,峰值功率高,材料吸收系数高,分辨率高等优点。利用157nm激光微加工的方法,在光子晶体光纤上融切出微小矩形孔,从而构成腔长为45.6μm的微光纤法布里-珀罗干涉腔,得到的干涉条纹平滑,衬比度约为26dB,并从激光与石英材料的相互作用上分析了形成较好干涉条纹的原因。把这种微腔应用于应变测量,在550μm范围内,腔长增量相对于应变的灵敏度为0.32nm/μm,线形度达0.9994。实验证明该微腔对温度不敏感,800℃范围内腔长变化仅20nm。157nm准分子激光加工光纤法布里-珀罗腔方法简单,一次成型,具有较高的加工效率和精度,有望实现光纤法布里-珀罗腔的规模化批量制造,具有较好的应用前景。     

用阶跃有效折射率模型研究光子晶体光纤色散特性

在采用阶跃有效折射率模型研究光子晶体光纤的可行性方面，提出了将普通单模光纤、色散位移光纤、色散平坦光纤作为一定极限条件下的折射率引导型光子晶体光纤特例的观点.通过编程计算，并与文献报道的实验数据对比，表明应用本模型可以揭示光子晶体光纤所具有的奇异的色散机理.特别是应用本模型具有更快的计算速度.还用本模型分析了空气孔直径、周期及芯径对色散特性的影响. 关键词： 折射率引导型光子晶体光纤 阶跃有效折射率模型 色散     

Numerical investigation and optimization of a photonic crystal fiber for simultaneous dispersion compensation over S + C + L wavelength bands

In this paper, we numerically investigate and optimize the profile of a photonic crystal fiber (PCF) that can eliminate the residual dispersion from the telecom link as well as can provide identical dispersion compensation over S + C + L bands. A full-vectorial finite element method combined with genetic algorithm is used to optimize the fiber’s profile as well as to accurately determine its modal properties. The optimized PCF exhibits a dispersion of −98.3 ps/nm/km with a variance of ±0.55 ps/nm/km from 1.48 μm to 1.63 μm (i.e., over 150 nm bandwidth) and a zero dispersion slope. Macro-bending loss performance of the designed PCF is also studied and it is found that the fiber shows low bending losses for the smallest feasible bending radius of 5 mm. Further, sensitivity analysis has been carried out for the proposed fiber design and it has been found that a ±2% change in the fiber parameters may lead to a ±8% shift of the dispersion from its nominal value.     

基于高精细度光腔锁频激光的分子吸收光谱测量

利用高精细度光腔锁定激光频率,实现了对分子吸收光谱的高精度测量.光腔采用低热膨胀系数的殷钢结构设计和温度控制,实现了腔长度的稳定;通过将激光频率锁定在光腔纵模上,实现了高频率精度和高灵敏度的光腔衰荡光谱测量.利用该装置示范性地测量了二氧化碳分子在6470.42 cm~(-1)附近的光腔衰荡光谱和色散光谱,得到了高精度的谱线参数,并和数据库谱线参数进行了对比.     

Single-body lensed photonic crystal fibers as side-viewing probes for optical imaging systems

We report the fabrication and performance of a lensed photonic crystal fiber (PCF) designed as a compact but effective side-viewing optical imaging probe. The lensed-PCF probe was implemented in a single body without using any other fibers or additional optics. The beam expansion region and a focusing ball lens, necessary for a focuser, were simultaneously formed along a small piece of PCF by applying arc discharges. The side-viewing ability was provided by polishing the ball lens with a femtosecond laser to form a total internal reflection surface. The working distance and the transverse resolution of the fabricated single-body lensed-PCF were experimentally measured to be 570 and 6.8 microm, respectively. With the proposed lensed-PCF probe, optical coherence tomography images of an in vitro biological sample were successfully obtained.     

Switchable multi-wavelength fiber ring laser based on a compact in-fiber Mach-Zehnder interferometer with photonic crystal fiber

Switchable multi-wavelength fiber ring laser with an in-fiber Mach-Zehnder interferometer incorporated into the ring cavity serving as wavelength-selective filter at room temperature is demonstrated. The filter is formed by splicing a section of few-mode photonic crystal fiber (PCF) and two segments of single mode fiber (SMF) with the air-holes on the both sides of PCF intentionally collapsed in the vicinity of the splices. By adjusting the states of the polarization controller (PC) appropriately, the laser can be switched among the stable single-, dual- and triple-wavelength lasing operations by exploiting polarization hole burning (PHB) effect.