Optical spectroscopy of Yb/Er codoped NaY(WO4)2 crystal

Erbium and ytterbium codoped double tungstates NaY(WO₄)₂ crystals were prepared by using Czochralski (CZ) pulling method. The absorption spectra in the region 290-2000 nm have been recorded at room temperature. The Judd-Ofelt theory was applied to the measured values of absorption line strengths to evaluate the spontaneous emission probabilities and stimulated emission cross sections of Er³⁺ ions in NaY(WO₄)₂ crystals. Intensive green and red lights were measured when the sample were pumped by a 974 nm laser diode (LD), especially, the intensities of green upconversion luminescence are very strong. The mechanism of energy transfer from Yb³⁺ to Er³⁺ ions was analyzed. Energy transfer and nonradiative relaxation played an important role in the upconversion process. Photoexcited luminescence experiments are also fulfilled to help analyzing the transit processes of the energy levels.     

Elaboration and characterization of TiO2 nanoparticles incorporated in SiO2 host matrix

Nanometer-scale TiO₂ particles have been synthesized by sol-gel method. It was incorporated in a glass-based silica aerogel. The composite was characterized by various techniques such as particle size analysis, scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM), X-ray diffraction (XRD), infrared spectroscopy (IR) and photoluminescence (PL). The bulk glass presents a strong luminescence at wavelengths ranging from 750 to 950 nm. This PL was attributed to various non-bridging oxygen hole centers (NBOHCs) defects resulting from thermal treatment and crystallization of TiO₂ at the interface between titania nanoparticles and silica host matrix.     

Combustion synthesis and photoluminescence of Eu, Dy-doped La2Zr2O7 nanocrystals

A facile and energy saving sol-gel combustion method has been used to prepare La₂Zr₂O₇ nanocrystallines. The pyrochlore La₂Zr₂O₇ nanocrystals have been obtained at a relatively low temperature with the grain size ranging from 45 to 70 nm. Eu³⁺ and Dy³⁺ have been introduced into the La₂Zr₂O₇ crystal structure, respectively, and the intense photoluminescence was observed. The relative intensity of electric dipole transition and magnetic dipole transition is considered for luminescence emission both of Eu³⁺ and Dy³⁺. The dependence of luminescence intensity on dopant concentration and the effect of Dy³⁺ co-doping on Eu³⁺ luminescence are also discussed.     

Application of TiO2 nano-particles on the electrode of dye-sensitized solar cells

In this study, nano-TiO₂ thin film electrode and solar cell have been investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet-visible absorption spectra, contact angle, X-ray photoelectron spectroscopy (XPS), and current-voltage characteristics analyses. X-ray diffraction patterns show that the best sintering temperature of a nano-TiO₂ film is 600 °C, at which TiO₂ anatase phase forms best and the particle size of 8-10 nm can be obtained. The SEM images of a nano-TiO₂ thin film show that the surface of the film is smooth and porous, and the thickness of the nano-TiO₂ film is 4 μm. The measurements of contact angle between nano-TiO₂ film and deionized water (DI water) reveal that the nano-TiO₂ film is super-hydrophilic when solarized under ultraviolet. The electrode of dye-sensitized solar cell is used as a free-base porphyrin with carboxyl group, 5,10,15,20-tetrakis (4-carboxyphenyl) porphyrin (TCPP) as the sensitizer to adsorb onto the TiO₂ thin film. From the results of ultraviolet-visible absorption spectra and XPS analyses of the electrode, the effects of nano-TiO₂ particles’ addition to the electrode of dye-sensitized solar cell can improve the absorption of visible light (400-700 nm) and increase electrons transferred from TCPP to the conduction band of TiO₂, resulting in the enhancement of efficiency for dye-sensitized solar cells.     

A potential red phosphor LiGd(MoO4)2:Eu for light-emitting diode application

Eu³⁺-doped LiGd(MoO₄)₂ red phosphor was synthesized by solid-state reaction, and its photoluminescent properties were measured. The effect of Eu³⁺ doping concentration on PL intensity was investigated, and the optimum concentration of Eu³⁺ doped in LiGd(MoO₄)₂ was found to be 30 mol%. Compared with Y₂O₂S:0.05Eu³⁺, Na_0.5Gd_0.5MoO₄:Eu³⁺ and KGd(MoO₄)₂:Eu³⁺, the LiGd(MoO₄)₂:Eu³⁺ phosphor showed a stronger excitation band around 395 nm and a higher intensity red emission of Eu³⁺ under 395 nm light excitation. For the first time, intensive red light-emitting diodes (LEDs) were fabricated by combining phosphor and a 395 nm InGaN chip, confirming that the LiGd(MoO₄)₂:Eu³⁺ phosphor is a good candidate for LED applications.     

Photoluminescence spectra of rare earth doped CaGa2S4 single crystals

Six kind CaGa₂S₄ single crystals doped with different rare earth (RE) elements are grown by the horizontal Bridgman method, and their photoluminescence (PL) spectra are measured in the temperature range from 10 to 300 K. The PL spectra of Ce or Eu doped crystals have broad line shapes due to the phonon assisted 4f-5d transitions. On the other hand, those of Pr³⁺, Tb³⁺, Er³⁺ or Tm³⁺ doped samples show narrow ones owing to the 4f-4f transitions. The assignments of the electronic levels are made in reference to the reported data of RE 4f multiplets observed in same materials.     

Synthesis and crystal structures and luminescent properties of divalent europium-doped Ba2ZnSi2O7 and BaZn2Si2O7

The monoclinic Ba₂ZnSi₂O₇:Eu²⁺ blue-green-emitting phosphor and the orthorhombic BaZn₂Si₂O₇:Eu²⁺ green-emitting phosphor were prepared by combustion-assisted synthesis method as the fluorescent materials for ultraviolet-light-emitting diodes (UV-LEDs) performed as a light source. The crystallinity and luminescence were investigated using X-ray diffraction (XRD) and photoluminescence (PL) spectroscopy. Pure monoclinic Ba₂ZnSi₂O₇ and orthorhombic BaZn₂Si₂O₇ crystallize completely at 1100 °C. The doped Eu²⁺ ions did not cause any significant change in the host structure. The emission spectra presented an emission position red shift of up to 16 nm from Ba₂ZnSi₂O₇:Eu²⁺ to BaZn₂Si₂O₇:Eu²⁺. The excitation spectra of Ba₂ZnSi₂O₇:Eu²⁺ and BaZn₂Si₂O₇:Eu²⁺ were broad-banding, extending from 260 to 465 nm, which match the emission of UV-LEDs.     

KGd(MoO4)2:Eu as a promising red phosphor for light-emitting diode application

A red phosphor KGd(MoO₄)₂:Eu³⁺ was prepared by solid-state reaction technique at high temperature. Its photoluminescent property was investigated and the optimum concentration of Eu³⁺ doped in the KGd(MoO₄)₂ is 25 mol%. Compared with Y₂O₂S:0.05Eu³⁺, the obtained KGd(MoO₄)₂:Eu³⁺ shows wider excitation band around 400 nm, higher intensity of Eu^{3+ 5}D₀–⁷F₂ emission upon excitation 393 nm, and the CIE chromaticity coordinates (x = 0.655, y = 0.345) are closer to the standard of National Television Standard Committee (NTSC). The optical properties of KGd(MoO₄)₂:Eu³⁺ suggest that it is an efficient red-emitting phosphor for light-emitting diode applications.     

Preparation of Ca(1−x)EuxGa2S4 crystals and their photoluminescence, absorption and excitation spectra

The single crystal of CaGa₂S₄:Eu is expected as a useful laser material with a high quantum efficiency of light emission. However, as far as our knowledge is concerned, the systematic study of the mixed compounds of Ca_(1−x)Eu_xGa₂S₄ as a function of x has not been reported up to now. Here, we have first constructed the phase diagram of the CaGa₂S₄ and EuGa₂S₄ pseudo binary system, and show that it forms the solid solution. Then we have grown single crystals of these compounds. The maximum photoluminescence efficiency is achieved at x=0.25. From the three peak energies observed in the photoluminescence excitation (PLE) and absorption spectra, the 5d excited states are suggested to consist of three levels arising from the multiplets of Eu²⁺ ions.     

Growth and optical properties of Eu/Li-co-doped SrB4O7 single crystals

This paper reports the growth and optical properties of Eu²⁺/Li⁺-co-doped SrB₄O₇ single crystals. High-quality Eu,Li:SrB₄O₇ crystals without macro-defects or cracks were grown using the top-seeded solution growth (TSSG) method. The absorption and luminescent properties were measured and different spectra were observed in the as-grown crystals. As the doping amount of lithium increases, the absorption peak at 300 nm becomes stronger and the emission peak shifts to a longer wavelength. This phenomenon could be attributed to the doping lithium ions, which might affect the electric field distribution in the lattice structure.     

Synthesis and optical properties of red emitting Eu doped CaZrO3 phosphor

Eu³⁺ activated Ca_1−xEu_xZrO₃ (x = 0.01–0.05) phosphor with perovskite structure has been synthesized by sol–gel combustion method. The structure, morphology and optical properties of materials were characterized by X-ray diffraction, scanning electron microscopy and fluorescence spectrometry. The XRD results indicate that crystals of CaZrO₃:Eu³⁺ belongs to orthorhombic perovskite structure. The phosphors can be effectively excited by UV light and the emission spectra results indicate that red luminescence of CaZrO₃:Eu³⁺ due to electric dipole transition ⁵D₀ → ⁷F₂ at 616 nm is dominant. Thus, these prepared phosphors show remarkable luminescent properties which find applications in display devices.     

Effect of Ce co-doping on KY3F10:Pr crystals

A spectroscopic investigation on the effect of Ce³⁺ co-doping in fluoride KY₃F₁₀:Pr³⁺ crystals is presented. In particular spectroscopic measurements of three different samples of KY₃F₁₀ crystal doped with 0.3at% Pr³⁺ and co-doped with 0at%, 0.17at% and 0.3at% Ce³⁺ are discussed. Details on the growth of the crystals are also reported. Measurements were performed in the temperature range 10-300 K. Fluorescence and lifetime measurements have shown a cross relaxation between ³P₀-¹D₂ levels of Pr³⁺ and ²F_7/2-²F_5/2 of Ce³⁺. Data exhibit that this effect is strictly related to the Cerium concentration.     

Synthesis and characterisations of Au-nanoparticle-doped TiO2 and CdO thin films

In the present study, pure and gold nanoparticle (Au NP)-doped titanium dioxide (TiO₂) and cadmium oxide (CdO) thin film were prepared by the sol–gel method, and the effect of Au NP doping on the optical, structural and morphological properties of these thin films was investigated. The prepared thin films were characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM) and ultraviolet–visible–near infrared (UV–Vis–NIR) spectra. While the optical band increases from 3.62 to 3.73 for TiO₂ thin films, it decreases from 2.20 to 1.55 for CdO thin films with increasing Au doping concentration. Analysis of XRD indicates that the intensities of peaks of the crystalline phase have increased with the increasing Au NP concentrations in all thin films. SEM images demonstrate that the surface morphologies of the samples were affected by the incorporation of Au NPs. Consequently, the most significant results of the present study are that the Au NPs can be used to modify the optical, structural and morphological properties of TiO₂ and CdO thin films.     

Synthesis of NaYF4 nanocrystals doped with Yb/Er and influence of citric acid on the green and red luminescence

In this paper, NaYF₄ nanocrystals doped with Yb³⁺ and Er³⁺ were synthesized in a medium containing polyethylene glycol and citric acid. This nanocrystal presents up-converting green and red emission bands which were simultaneously observed under the excitation of a 980 infrared diode laser. Mainly, the green to red ratio (GRR) of the up-conversion emission of the hexagonal NaYF₄ nanocrystals doped with Yb³⁺ and Er³⁺ can be finely tuned by changing the content of citric acid to be nearly an arithmetic progression, i.e. 6/4, 5/4, 4/4, and 3/4. The further analysis revealed that citric acid plays a key role in improving the surface crystallinity of NaYF₄ nanocrystals doped with Yb³⁺ and Er³⁺, to which the achievement of fine controlling on GRR is ascribed.     

Crystal field parameters and energy level structure of the MnO4 tetroxo anion in Li3PO4, Ca2PO4Cl and Sr5(PO4)3Cl crystals

A comparative study concerning the electronic structure of the Mn⁵⁺ ion in the Li₃PO₄, Ca₂PO₄Cl, Sr₅(PO₄)₃Cl host lattices has been carried out in the framework of the exchange charge model. The crystal field parameters have been evaluated using the structural data as the only input information. The 10 K absorption spectra of the investigated compounds have been measured in order to verify the correspondence between experimental and calculated energy levels. A systematic trend of the crystal field splitting of the most intense transitions has been evidenced and discussed by considering the symmetry properties of the coordination polyhedra around Mn⁵⁺.     

Luminescence spectroscopy of Ti ions in Li2O-CaF2-P2O5 glass ceramics

Li₂O-CaF₂-P₂O₅ glasses mixed with different concentrations of TiO₂ (ranging from 0 to 0.8 mol%) were crystallized at 500 °C. The photo luminescence spectra of these samples excited with the wavelengths corresponding to their absorption edges have been recorded at room temperature. The spectra exhibited an emission band in the wavelength region 470-500 nm. The emission band is identified due to the charge transfer from O²⁻ ion in to empty 3d orbital of octahedrally positioned Ti⁴⁺ ions. The analysis of the results further indicates the highest luminescence efficiency for the glass ceramic sample crystallized with 0.6 mol% of TiO₂.     

Blue-green and red photoluminescence in CaTiO3:Sm

Blue-green and red photoluminescence (PL) emission in structurally disordered CaTiO₃:Sm (CT:Sm) powders was observed at room temperature with laser excitation at 350.7 nm. The perovskite-like titanate CT:Sm powders prepared by a soft chemical processing at different temperatures of annealing were structurally characterized by X-ray diffraction (XRD) and X-ray absorption near-edge structure (XANES). The results indicate that the generation of the broad PL band is related to order-disorder degree in the perovskite-like structure.     

Visible luminescence of Al2O3 nanoparticles embedded in silica glass host matrix

This paper deals with the sol-gel elaboration and defects photoluminescence (PL) examination of Al₂O₃ nanocrystallites (size ∼30 nm) confined in glass based on silica aerogel. Aluminium oxide aerogels were synthesized using esterification reaction for hydrolysis of the precursor and supercritical conditions of ethyl alcohol for drying. The obtained nanopowder was incorporated in SiO₂ host matrix. After heating under natural atmosphere at 1150 °C for 2 h, the composite Al₂O₃/SiO₂ (AS) exhibited a strong PL bands at 400-600 and 700-900 nm in 78-300 K temperature range. PL excitation (PLE) measurements show different origins of the emission. It was suggested that OH-related radiative centres and non-bridging oxygen hole centres (NBOHCs) were responsible for the bands at 400-600 and 700-900 nm, respectively.     

The photoluminescent properties of Eu in MgO-Ga2O3-SiO2 nanocrystalline glass-ceramic

The MgO-Ga₂O₃-SiO₂ glass-ceramic (GC) containing MgGa₂O₄ nanocrystals and glasses doped with Eu³⁺ ions were prepared by the sol-gel method. The down-conversion and up-conversion luminescence (UCL) properties were studied. The results indicated that the relative intensity of f-f transitions of Eu³⁺ decreased in contrast with that of charge transfer (CT) absorption with the increase in heating temperature. Using a Xe lamp and 800 nm femtosecond (fs) laser excitation, strong red luminescence of Eu³⁺ in MgO-Ga₂O₃-SiO₂ glasses and GC was observed.     

Synthesis and VUV spectral properties of nanoscaled Zn2SiO4:Mn green phosphor

Nanoscaled Zn₂SiO₄:Mn²⁺ green phosphor with regular and uniform morphology was synthesized by hydrothermal method at a low temperature of 140 °C. The structure and morphology of the phosphor was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The effects of the hydrothermal temperature and the time on the crystallite structure and the vacuum ultraviolet (VUV) photoluminescence (PL) properties were evaluated. The as-synthesized nanoscaled Zn₂SiO₄:Mn²⁺ phosphor exhibited intensive broad emission around 523 nm, which was attributed to the ⁴T₁→⁶A₁ transition of Mn²⁺. The PL intensity increased along with the increasing hydrothermal temperature and time. The heat-treated phosphors exhibited higher PL intensity than the corresponding samples prepared using the conventional solid-state reaction.