Simple tunable multiwavelength Brillouin/Erbium fiber laser utilizing short-length photonic crystal fiber

We have demonstrated a simple ring cavity tunable multiwavelength Brillouin/Erbium fiber laser (MWBEFL), in which 70 m highly nonlinear photonic crystal fiber (HNL-PCF) is used as the Brillouin gain medium. The fiber laser utilizes recycling mechanism to enhance stimulated Brillouin scattering (SBS). The configuration that consists of only 3 optical components is easy to be integrated and improves the practicality. At the maximum 1480 nm pump power of 110 mW and the Brillouin pump power of 3 dBm, 10 stable output channels with more than 10 dB optical signal to noise ratio (OSNR) and 0.078 nm channel spacing could achieve 10 nm tuning ranges.     

Supercontinuum generation by combining clad-pumped Er/Yb co-doped fiber amplifier and highly nonlinear photonic crystal fiber

We present an experimental study on supercontinuum generation by combining a clad-pumped Er/Yb co-doped fiber amplifier (EYDFA) and a highly nonlinear photonic crystal fiber (HNL-PCF). By using the nonlinear polarization rotation technique, a stable femtosecond optical pulse seed signal with a central wavelength of 1556.36 nm and a spectral line width of ∼5.6 nm has been obtained. Then, this pulsed seed signal is amplified by the EYDFA, the amplified pulse, which, with the broaden spectrum, propagates in the HNL-PCF. The 20 dB bandwidth of ∼520 nm from 1230 to 1750 nm is obtained.     

Supercontinuum generation in chloroform-filled photonic crystal fibers

We propose a novel method to achieve highly nonlinear photonic crystal fiber (PCF) by filling highly nonlinear liquid chloroform in the core of hollow-core PCF (HCPCF). The dispersion properties and electric field distribution of the fundamental mode are calculated by using the full-vector finite element method (FVFEM). Simulation results indicate that the zero-dispersion wavelength (ZDWL) of the chloroform-filled PCF is adjustable around 800 nm. Hence the femtosecond laser pulses with central wavelength at 800 nm can propagate in anomalous dispersion regime of the PCF, inducing the spectra broadening.     

双包层大模场面积保偏掺镱光子晶体光纤研究

采用改进的化学气相沉积法和溶液掺杂法制备出掺镱石英光纤预制棒,以该预制棒为有源纤芯制备芯区直径约为30μm的双包层保偏掺镱光子晶体光纤.模拟计算得到该保偏光纤的模场面积约232μm2,双折射系数B为5×10-5.利用该光纤分别进行了脉冲激光和连续激光的放大测试实验,在国内首次实现了高效率的飞秒激光放大,2 m长的光子晶体光纤可得到1.64 W的激光输出,激光放大斜率效率为49.8%.同时5 m长的光纤还能够实现8.12 W的连续激光放大输出,斜率效率达到55.9%,具有较高的斜率效率.此外,该光纤消光比约10 dB,具有良好的保偏特性.     

Highly birefringent photonic crystal fiber polarization splitter made of soft glass

A soft glass dual core polarization splitter based on highly birefringent photonic crystal fiber (PCF) is proposed and the full vector finite element method (FEM) is employed to analyze the impacts of structural parameters on birefringence and the coupling length, and simulation results show that high birefringence on the order of 10⁻² can be obtained at 1.55 μm, moreover, hole size, hole pitch and elliptic ratio all affect birefringence and the coupling length. Based on these results, the PCF's structure is optimized to realize a polarization splitter of 282 μm whose largest extinction ratio is around −45.42 dB at 1.55 μm. Meanwhile, the bandwidth at the extinction ratio of −10 dB is about 90 nm, and around 32 nm at −20 dB.     

大模场面积光子晶体光纤耗散孤子锁模激光器

研制了一种基于掺Yb3+的双包层大模场面积偏振光子晶体光纤的耗散孤子锁模激光器.利用数值模拟分析了光纤激光器中耗散孤子动力学过程,与全正色散锁模激光器相比,脉冲窄化机理更加丰富,半导体可饱和吸收镜(SESAM)的非线性吸收,啁啾脉冲的光谱滤波以及光纤的增益色散同时起作用,这些因素使耗散孤子锁模更加容易实现,并且稳定运行.其中,光谱滤波的耗散过程是稳定锁模机制的主导因素,滤波片能够在频域和时域同时窄化脉冲,并且去除脉冲啁啾,限制脉冲在腔内始终小于1ps.在实验上实现了无色散补偿腔中直接输出脉冲宽度777fs,最高平均功率达到1W,重复频率48·27MHz,对应单脉冲能量20nJ的飞秒激光.     

基于光子晶体光纤的百瓦量级超连续谱光源研究

采用脉冲重复频率可调的高功率皮秒脉冲光纤激 光抽运光子晶体光纤产生了平均输出功率为101 W的全 光纤化超连续谱. 通过一系列的对比实验, 详细研究了抽运激光的脉冲重复频率以及光子晶体光纤的长度对超连续谱产生的影响. 最后, 对如何实现更高平均功率的超连续谱输出进行相关的分析和讨论. 相关研究结果可以为进一步发展基于光子晶体光纤的高功率超连续谱光源提供一定的参考. 关键词： 光子晶体光纤 非线性光纤光学 超连续谱产生     

Ultra-wideband single-polarization single-mode, high nonlinearity photonic crystal fiber

We report a novel design of photonic crystal fiber (PCF) with a rectangular array of four closely-spaced, highly elliptical air holes in the core region and a circular-air-hole cladding. The proposed PCF is able to support ultra-wideband single-polarization single-mode (SPSM) transmission from the visible band to the near infrared band. With the aid of the inner cladding formed by the central air holes, one polarization of the fundamental mode can be cut off at very short wavelengths and ultra-wideband SPSM propagation can be achieved. The inner cladding also suppresses the higher order modes and allows large air filling fraction in the outer cladding while the proposed fiber remains SPSM, which significantly reduces the mode effective area and the confinement loss. Our simulation results indicate that the proposed PCF has a 1540 nm SMSP range with <0.25 dB/km confinement loss and an effective area of 2.2 μm². Moreover, the group velocity dispersion (GVD) of the proposed PCF can also be tuned to be flat and near zero at the near infrared band (∼800 nm) by optimizing the outer cladding structure, potentially enabling many nonlinear applications.     

Design of diamond-shape photonic crystal fiber polarization filter based on surface plasma resonance effect

A novel plasmonic polarization filter based on the diamond-shape photonic crystal fiber(PCF) is proposed. The resonant coupling characteristics of the PCF polarization filter are investigated by the full-vector finite-element method. By optimizing the geometric parameters of the PCF, when the fiber length is 5 mm, the polarization filter has a bandwidth of 990 nm and an extinction ratio(ER) of lower than -20 dB. Moreover, a single wavelength polarization filter can also be achieved, along with an ER of -279.78 dB at wavelength 1.55 μm. It is believed that the proposed PCF polarization filter will be very useful in laser and optical communication systems.     

Ultra-broadband polarization splitter based on graphene layer-filled dual-core photonic crystal fiber

An ultra-broadband polarization splitter based on graphene layer-filled dual-core photonic crystal fiber(GDC-PCF)that can work in a wavelength range from 1120 nm to 1730 nm is proposed in this paper. Through optimizing fiber configuration, the polarization splitter has an extinction ratio of-56.3 dB at 1.55 μm with a fiber length of 4.8 mm.Compared with the photonic crystal fiber reported splitters, to our knowledge, the GDC-PCF splitter with the extinction ratio below-20 dB has a super wide bandwidth of 610 nm. Due to the excellent splitting characteristics, the GDC-PCF will be used in coherent optical communication systems in a wavelength range from infrared to mid-infraed.     

一种新型高双折射光子晶体光纤特性研究

设计了一种高双折射高非线性光子晶体光纤, 采用全矢量有限元法研究了这种光纤的基模模场、双折射、非线性、有效模面积及色散特性. 数值研究发现, 减小孔间距Λ的大小, 在波长1550 nm 处, 该光纤可获得10^-2 数量级的双折射B, 比普通的椭圆保偏光纤高约两个数量级; 同时, 该光纤可获得42 W^-1·km^-1 的高非线性系数γ. 另外,分别在可见光和近红外波段出现了两个零色散波长, 在波长800–2000 nm 之间具有良好的色散平坦特性. 这种设计为获得高双折射高非线性超平坦色散光子晶体光纤提供了一种新的方法, 该光纤在偏振控制、非线性光学和色散控制方面具有广泛的应用前景. 关键词： 光子晶体光纤 高双折射 高非线性 有限元法     

A novel polarization splitter based on dual-core hybrid photonic crystal fibers

Highly birefringent dual-core photonic crystal fibers (PCFs) can be used as a polarization splitter because the orthogonal polarization modes with dissimilar coupling lengths are easily separated from each other. Different from the traditional methods achieving high birefringence, a new highly birefringent hybrid PCF that guides light by both index guiding and bandgap guiding is proposed. Firstly, a novel polarization splitter based on this kind of dual-core hybrid PCF is designed. The transmission modes, coupling lengths for the two orthogonal polarizations and performance of the proposed polarization splitter are investigated and numerically analyzed. The results demonstrate that it is possible to obtain a 4.72-mm-long polarization splitter. The splitting ratio is better than −20 dB in a large wavelength range of 1.53-1.72 μm. Its bandwidth is about 190 nm.     

基于高非线性光子晶体光纤Sagnac环形镜的全光开关

设计了一种新颖的、低开关功率的全光开关. 将高非线性光子晶体光纤和双向抽运掺饵光纤放大器引入Sagnac环形镜内，破坏了环形镜的对称性，利用交叉相位调制作用使反向传输的两路信号光产生非线性相移，从而实现开关效应. 理论分析表明：开关功率与放大器的增益倍数和光子晶体光纤非线性系数的积成反比，在实验中所得开关功率约40 mW，消光比约为15.9 dB，并且信号光透过率随脉冲控制光峰值功率呈余弦变化，实验结果与理论分析相吻合. 关键词： 全光开关 高非线性光子晶体光纤 环形镜 交叉相位调制     

基于非线性偏振旋转锁模的高功率光子晶体光纤飞秒激光振荡器

为了探索大模场面积光子晶体光纤锁模激光器在全正色散锁模域内的耗散孤子锁模机理, 以获得更大的单脉冲能量和更高的峰值功率, 本文搭建了以掺镱大模场面积光子晶体光纤作为增益介质的耗散孤子锁模激光器. 激光器使用环形腔结构, 利用非线性偏振旋转以及滤光片提供的耗散作用实现了稳定的锁模运转. 实验中, 从激光器振荡级直接获得了平均功率10 W, 重复频率49.09 MHz(对应202 nJ的单脉冲能量), 脉冲宽度为1.03 ps的稳定锁模脉冲输出, 经过腔外色散补偿得到的脉冲宽度为95.5 fs.     

High energy femtosecond supercontinuum light generation in large mode area photonic crystal fiber

A large mode area photonic crystal fiber (LMA PCF) with an effective area of 180 μm² is used to generate a high energy, micro-joule range, flat, octave spanning supercontinuum (SC) extending from ~ 600 nm to ~ 1720 nm. A train of femtosecond pulses from a widely-tunable parametric amplifier pumped by a Ti:Sapphire regenerative amplifier system are coupled into a 20 cm length of LMA PCF generating a SC of 1.4 μJ energy. We present an experimental study of the high energy SC as a function of the input power and the pumping wavelength. The spectrum obtained at a pump wavelength of 1260 nm presents spectral flatness variation less than 12 dB over more than 1.1 octave bandwidth. The physical processes behind the SC formation are described in the normal and the anomalous dispersion regions. Our experimental results are successfully compared with the numerical solution of the nonlinear Schrödinger equation.     

亚百飞秒高功率掺镱大模面积光子晶体光纤飞秒激光放大器的实验研究

实验研究了掺镱双包层保偏大模面积光子晶体光纤飞秒激光放大器. 获得了平均功率达16W的飞秒激光放大输出,在50MHz重复频率下,对应的单脉冲能量达到320nJ. 增益光纤长3.5m,由于自相位调制效应,种子光脉冲光谱在放大过程中同时展宽,从而支持更窄的脉冲宽度. 经过光栅后,脉冲宽度压缩到了85fs. 系统中的振荡器和放大器基于同一种具有偏振结构的大模面积光子晶体光纤,具有很好的环境稳定性和进一步集成的可能. 关键词： 光子晶体光纤 大模场面积光纤 飞秒激光 光纤放大器     

七芯光子晶体光纤中百瓦量级超连续谱的产生

采用平均功率为141.6 W的皮秒光纤激光泵浦一段国产七芯光子晶体光纤,获得了平均功率为104.2 W、连续光谱覆盖范围从750至1700 nm以上的超连续谱输出.详细研究了超连续光谱随泵浦功率增加的演变过程,并对基于该七芯光子晶体光纤的超连续谱光源的光谱拓展和功率提升潜力进行相关的分析和讨论.该研究结果对高功率超连续谱光源的发展具有一定的参考价值.     

Fabrication and characterization of solid-core photonic crystal fiber with steering-wheel air-cladding for strong evanescent field overlap

We report the fabrication and characterization of a photonic crystal fiber with solid-core and steering-wheel pattern air-cladding (SW-PCF). Specifically, SW-PCF is fabricated using sol-gel casting technique. Attenuation spectrum shows the fiber losses of 0.14 dB/m, 0.087 dB/m, and 0.0 32 dB/m at wavelengths of 850 nm, 1000 nm, and 1500 nm, respectively, while the cut-off wavelength for single-mode operation is 1360 nm. Near-field imaging is used for the determination of mode-field diameter. The fiber presents the anomalous dispersion expending to short wavelength range with high non-linearity. Tapered SW-PCFs in the transverse geometries are numerically calculated, which suggests that the tapering of fiber holds a significant promise for the enhancement of power overlap in air holes. Properly designed and fabricated SW-PCF can thus be utilized as attractive platform for evanescent field sensing and detection.     

Large negative dispersion in dual-concentric-core photonic crystal fiber with hybrid cladding structure based on complete leaky mode coupling

Considering the optical stability of solution, the sugar-solution is infused into the outer core ring of dual-concentric-core photonic crystal fiber (DCCPCF). The influences of structure parameters and solution concentration on the phase and loss matching are comprehensively analyzed. By choosing the appropriate outer core mode to completely couple with the inner core fundamental mode, the large negative dispersion PCF around 1.55 μm is designed, which has the dispersion value of − 39,500 ps/km/nm as well as bandwidth of 7.4 nm and effective mode area of 28.3 μm². The designed PCF with hybrid cladding structure can effectively compensate the positive dispersion of conventional single mode fiber, and suppress the system perturbation caused by a series of nonlinear effects. Considering the mode field mismatching between the DCCPCF and the tapered fiber, the calculated connection loss around 1.55 μm is below 3 dB. In addition, the equivalent propagation constants of two leaky modes are deduced from the coupled-mode theory, and the complete mode coupling case can be well predicted by comparing the real and imaginary parts of propagation constants.     

All-optical continuously tunable delay with a high linear-chirp-rate fiber Bragg grating based on four-wave mixing in a highly-nonlinear photonic crystal fiber

A scheme for hi-fi all-optical continuously tunable delay is proposed. The signal wavelength is converted to a desired idler wavelength and converted back after being delayed by a high linear-chirp-rate (HLCR) fiber Bragg grating (FBG) based on four-wave mixing (FWM) in a highly-nonlinear photonic crystal fiber (HN-PCF). In our experiment, 400 ps (more than 8 full width of half maximum, FWHM) tunable delay is achieved for a 10 GHz clock pulse with relative pulse width broaden ratio (RPWBR) of 2.08%. The power penalty is only 0.3 dB at 10⁻⁹ BER for a 10 Gb/s 2³¹−1 pseudo random bit sequence (PRBS) data.