Fabrication of high-quality three-dimensional photonic crystal heterostructures

Three-dimensional photonic crystal (PC) heterostructures with high quality are fabricated by using a pressure controlled isothermal heating vertical deposition technique. The formed heterostructures have higher quality, such as deeper band gaps and sharper band edges, than the heterostructures reported so far. Such a significant improvement in quality is due to the introduction of a thin TiO₂ buffer layer between the two constitutional PCs. It is revealed that the disorder caused by lattice mismatch is successfully removed if the buffer layer is used once. As a result, the formed heterostructures possess the main features in the band gap of constitutional PCs. The crucial role of the thin buffer layer is also verified by numerical simulations based on the finite-difference time-domain technique.     

Graphene based photonic crystal optical filter: Design and exploration of the tunability

Optical characteristics of two new graphene based photonic crystals are studied in detail. A structure containing alternating layers of graphene and SiO₂ slabs is considered as the ideal crystal. The dependency of the photonic band gaps (PBGs) to the dielectric layer thickness and the period number is explored at first step. Potential of the proposed crystal to be used as an optical filter is then investigated. Adding a nonlinear electro-optic polymer as a defect layer, the alterations of the optical features are inspected. Results show that the defect layer insertion causes a resonant mode inside the PBGs. However, the location of the defect layer inside the crystal is very effective on both the frequency and width of the resonant mode. Tunability of the optical features is probed by taking into account of the dependencies to the wave incident angle, graphene chemical potential and the applied external voltage to the defect layer.     

Optical properties of one-dimensional photonic crystals obtained by micromatchining silicon (a review)

The theoretical and experimental investigations of photonic band gaps in one-dimensional photonic crystals created by micromatchining silicon, which have been performed by the author as part of his doctoral dissertation, are presented. The most important result of the work is the development of a method of modeling photonic crystals based on photonic band gap maps plotted in structure–property coordinates, which can be used with any optical materials and in any region of electromagnetic radiation, and also for nonperiodic structures. This method made it possible to realize the targeted control of the optical contrast of photonic crystals and to predict the optical properties of optical heterostructures and three-component and composite photonic crystals. The theoretical findings were experimentally implemented using methods of micromatchining silicon, which can be incorporated into modern technological lines for the production of microchips. In the IR spectra of a designed and a fabricated optical heterostructure (a composite photonic crystal), extended bands with high reflectivities were obtained. In a Si-based three-component photonic crystal, broad transmission bands and photonic band gaps in the middle IR region have been predicted and experimentally demonstrated for the first time. Si–liquid crystal periodic structures with electric-field tunable photonic band-gap edges have been investigated. The one-dimensional photonic crystals developed based on micromatchining silicon can serve as a basis for creating components of optical processors, as well as highly sensitive chemical and biological sensors in a wide region of the IR spectrum (from 1 to 20 μm) for lab-on-a-chip applications.     

二维函数光子晶体

光子晶体是由两种或两种以上不同介电常数材料所构成的周期性光学纳米结构.光子晶体结构可分为一维、二维和三维,其中二维光子晶体已成为研究的热点.可调带隙的二维光子晶体可以设计出新型的光学器件,因此,对它的研究具有重要的理论意义和应用价值.本文提出的二维新型函数光子晶体可以实现光子晶体带隙的可调性.所谓二维函数光子晶体,即组成它的介质柱的介电常数是空间坐标的函数,它不同于介电常数为常数的二维常规光子晶体.二维函数光子晶体是通过光折变非线性光学效应或电光效应使介质柱的介电常数成为空间坐标的函数.运用平面波展开法给出了TE和TM波的本征方程,由傅里叶变换得到二维函数光子晶体介电常数ε(r)的傅里叶变换ε(G),其傅里叶变换比常规二维光子晶体的复杂.计算发现当介质柱介电常数为常数时,其傅里叶变换与常规二维光子晶体的相同,因此二维常规光子晶体是二维函数光子晶体的特例.在此基础上具体研究了二维函数光子晶体TE波和TM波的带隙结构,其介质柱介电常数函数形式取为ε(r)=k·r+b,其中k,b为可调的参数.并与二维常规光子晶体TE波和TM波的带隙结构进行了比较,发现二维函数光子晶体与二维常规光子晶体TE波和TM波的带隙结构有明显的区别,二维函数光子晶体的带隙数目、位置以及宽度随参数k的变化而发生改变.从而实现了二维函数光子晶体带隙结构的可调性,为基于二维光子晶体的光学器件的设计提供了新的设计方法和重要的理论依据.     

Optimization of two-photon absorption enhancement in one-dimensional photonic crystals with defect states

One-dimensional photonic crystals with a defect layer of CdS were fabricated. The observed enhancement of two-photon absorption (TPA) in the CdS layer can be attributed to the intensified optical field confined within the defect layer of the photonic crystal. The results show that the enhancement of TPA coefficient depends basically on the number of periods of the photonic crystal and the defect mode position in the photonic band gap. The observation agrees qualitatively with the expectations of a computation by matrix transfer formulation.     

Design of photonic bands for opal-based photonic crystals

To make a device from an opal—or otherwise—the photonic bands and the optical properties derived from them are needed. Knowing the effects of different parameters defining the opal geometry and different possible modifications of its structure are needed, too. An accurate definition of the device will be required to obtain a good performance. With this aim, the optics of light with a wavevector in the vicinity of the L point in the Brillouin zone and its coupling to bare opals band structure are presented. An important aspect is the transition from finite to infinite crystal and the study of size effects on the bands. It is possible to substantially alter the photonic band structure of an opal-based system, while maintaining the lattice structure, simply by growing layers of other materials with an appropriate refractive index. Here, it is shown how, by the growth of accurately controlled thin layers of silicon and germanium, and further processing, one can induce the opening of two complete photonic band gaps (PBGs) in an opal structure. Finally, the possibility to fabricate a simple device consisting in a planar waveguide will be shown. By means of a very simple and inexpensive procedure, engineered planar defects acting as microcavities have been realized. These can be viewed as a particular case of a much more general class of heterostructures that can be grown by combining opal vertical deposition and chemical vapour deposition of oxides. A further step is made by applying electron beam lithography to provide lateral definition and facilitate three-dimensional structuring.     

一维缺陷光子晶体温度的测量

采用Si和SiO₂两种介质材料构造一维缺陷光子晶体,缺陷层介质为Si,利用传输矩阵法对带有缺陷的一维光子晶体的传光特性进行了理论分析,并得到其带隙特性.由于缺陷的存在,使得光子晶体的透射谱中产生缺陷峰.当被测温度变化时,根据两种介质的热光效应和热膨胀效应,光子晶体介质和缺陷层的光学厚度和折射率发生变化,透射谱缺陷峰产生漂移,由缺陷峰的中心波长漂移量得到被测温度的大小.构建了一维缺陷光子晶体测量温度的实验系统,实验结果表明缺陷峰中心波长与光子晶体所受的温度呈线性关系,测量灵敏度为0—2 关键词： 温度测量 一维光子晶体 传输矩阵法 缺陷峰     

二维点缺陷正方光子晶体的微腔结构

通过平面波展开法对由Al₂O₃介质棒在空气背景介质中构成含有点缺陷的二维正方光子晶体微腔结构进行研究,计算得出缺陷态能带以及缺陷态模场分布。缺陷模对应的电磁波波长为470~476nm。对该微腔结构的品质因数的求解,得出缺陷态光谱曲线。在光谱曲线中,随着传输波长的增大,将产生几个峰值,并且在475nm处的波动最为明显,反映出在475nm附近的电磁波段在缺陷处的光强较大。进一步利用全矢量等效折射率法研究该结构缺陷模频率的稳定性,得出等效折射率的变化曲线。从等效折射率变化曲线可以看出,当传输波长达到475nm时,该结构已经达到稳定传输的区域。含缺陷模的二维光子晶体微腔结构在光子晶体发光二极管以及高阈值半导体激光器等方面有着重要的应用价值。     

Physics and applications of photonic crystals

In this article, we investigate how the photonic band gaps and the variety of band dispersions of photonic crystals can be utilized for various applications and how they further give rise to completely novel optical phenomena. The enhancement of spontaneous emission through coupled cavity waveguides in a one-dimensional silicon nitride photonic microcrystal is investigated. We then present the highly directive radiation from sources embedded in two-dimensional photonic crystals. The manifestation of novel and intriguing optical properties of photonic crystals are exemplified experimentally by the negative refraction and the focusing of electromagnetic waves through a photonic crystal slab with subwavelength resolution.     

Two-dimensional photonic crystals with pure germanium-on-insulator

We have investigated pure germanium two-dimensional photonic crystals. The photonic crystals which exhibit resonances in the near infrared spectral range were fabricated on germanium-on-insulator substrates using standard silicon-based processing. The germanium-on-insulator substrate consists of a thin layer of pure germanium-on-oxide deposited on a silicon substrate. The optical properties are probed by the direct band gap optical recombination of pure germanium at room temperature. Resonant optical modes are evidenced between 1.68 and 1.53 μm in different type of hexagonal cavities (H1-H5). The spectral position of the modes is controlled by the lattice periodicity and air filling factor of the photonic crystals. Close to the Ge band edge, the quality factors are limited by the bulk material absorption.     

Localized electromagnetic modes and the transmission spectrum of a one-dimensional photonic crystal with lattice defects

The properties of localized electromagnetic modes in a one-dimensional photonic crystal with a structural defect layer were studied. The role of the defect was played by an anisotropic nematic liquid crystal layer. The frequency and the damping factor of defect modes were shown to substantially depend on the defect layer thickness and the orientation of the optical axis of the nematic. The transmission spectra of photonic crystals with one and two lattice defects were studied. Taking into account the special feature of nematic liquid crystals distinguishing them from usual crystals, namely, large permittivity anisotropy, it was shown that the transmission spectrum of the photonic crystal could be controlled by varying the orientation of the optical axis of the nematic, for instance, under the action of an external electric field.     

Large-scale photonic crystals with inserted defects and their optical properties

Deliberately introducing defects into photonic crystals is an important way to functionalize the photonic crystals. We prepare a special large-scale three-dimensional(3D) photonic crystal(PC) with designed defects by an easy and low-cost method. The defect layer consists of photoresist strips or air-core strips. Field emission scanning electron microscopy(FESEM) shows that the 3D PC is of good quality and the defect layer is uniform. Different defect states shown in the ultraviolet-visible spectra are induced by the photoresist strip layer and air-core strip layer. The special large-scale 3D PC can be tested for integrated optical circuits, and the defects can act as optical waveguides.     

可见光波段SiO2/CdSe一维光子晶体及缺陷模的研究究

采用SiO2/CdSe构建了可见光波段一维光子晶体结构,并在其中引入LiTaO3缺陷层。利用传输矩阵法,分析了电磁波在无缺陷与含LiTaO3缺陷层两种光子晶体中的带隙结构,系统地研究了缺陷层参数对光子晶体可见光波段带隙结构的影响规律。计算结果表明：LiTaO3的引入,有利于带隙宽度的增加,调整缺陷层结构参数,缺陷模的位置可在不同颜色区域出现,如红光、黄光等缺陷模。该结构有望用于制作可见光波段的滤波器。     

Photonic band gaps structure properties of two-dimensional function photonic crystals

The tunable two-dimensional photonic crystals band gap, absolute photonic band gap and semi-Dirac point are beneficial to designing the novel optical devices. In this paper, tunable photonic band gaps structure was realized by a new type two-dimensional function photonic crystals, which dielectric constants of medium columns are functions of space coordinates. However for the two-dimensional conventional photonic crystals the dielectric constant does not change with space coordinates. As the parameter adjustment, we found that the photonic band gaps structures are dielectric constant function coefficient, medium columns radius, dielectric constant function form period number and pump light intensity dependent, namely, the photonic band gaps position and width can be tuned. we also obtained absolute photonic band gaps and semi-Dirac point in the photonic band gaps structures of two-dimensional function photonic crystals. These results provide an important theoretical foundation for design novel optical devices.     

Low-dimensional waveguide microwave photonic crystals

Structures containing periodically alternating elements, which are a source of high-order waves, are investigated as low-dimensional waveguide microwave photonic crystals. The band character of the transmittance and the reflectance of a photonic crystal, which consists of sequentially alternating dielectric layers and thin metallic plates partially overlapping the waveguide section, is revealed by the numerical modeling and the experimental investigation of amplitude-frequency characteristics. It has been shown that the application of metallic plates with gaps in the structure of the photonic crystal made it possible to decrease its longitudinal size substantially compared with photonic crystals fabricated based on elements made of alternating dielectric layers with various permittivities.     

Two-dimensional function photonic crystals

In this paper, we have studied two-dimensional function photonic crystals, in which the dielectric constants of medium columns are the functions of space coordinates , that can become true easily by electro-optical effect and optical kerr effect. We calculated the band gap structures of TE and TM waves, and found the TE (TM) wave band gaps of function photonic crystals are wider (narrower) than the conventional photonic crystals. For the two-dimensional function photonic crystals, when the dielectric constant functions change, the band gaps numbers, width and position should be changed, and the band gap structures of two-dimensional function photonic crystals can be adjusted flexibly, the needed band gap structures can be designed by the two-dimensional function photonic crystals, and it can be of help to design optical devices.     

一维液晶光子晶体透射谱的研究

一维液晶光子晶体在光滤波器、低阈值激光器和光开关等领域有着很好的应用前景。研究了一维液晶光子晶体的透射谱,电压范围在0～10V内,光谱调谐范围约为50nm,透射峰半高宽为18nm,禁带宽度近400nm。进一步提出了非偏振光型液晶光子晶体,设计了相互垂直0°扭曲取向的双液晶层一维液晶光子晶体器件。双液晶层起到了对各向偏振光光程的补偿作用,使得禁带中的两个透射峰合并为一个透射峰,加强了光强度,增强了滤波性能。     

Applications of the finite difference mode solution method to photonic crystal structures

The finite difference waveguide mode solution method, which has been popularly employed in the study of waveguide modes on various optical and dielectric waveguides, is utilized to calculate the modal characteristics of photonic crystal fibers (PCFs) and planar photonic crystal waveguides and the band diagrams of two-dimensional photonic crystals. Vector guided modes on both PCFs based on the total internal reflection guiding mechanism ('holey fibers') and those resulting from photonic band gap effect are accurately computed, with their effective indexes and field distributions compared with other methods. Calculated dispersion of a single-core holey fiber and coupled-power behavior of a two-core holey fiber are found to agree with measured results. For applications to band diagram calculation and planar photonic crystal waveguide analysis, the finite difference scheme is modified simply by imposing suitable periodic boundary condition. Numerical results for air-column crystals and dielectric-rod crystals are both found to agree well with calculations using other methods.     

横磁模式下二维非磁化等离子体光子晶体的线缺陷特性研究

采用等离子体的分段线性电流密度卷积时域有限差分算法研究了横磁波入射时具有单一线缺陷的二维非磁化等离子体光子晶体的缺陷模特性. 从频域角度分析得到微分高斯脉冲的透射系数,并讨论该光子晶体的晶格常数、介质圆柱半径、周期常数、缺陷层参数和等离子体参数对缺陷模特性的影响. 结果表明,改变周期常数、缺陷层位置和等离子体碰撞频率不会改变缺陷模的频率,改变缺陷层介质圆柱的相对介电常数、半径和缺陷层到介质层的中心距离可以在不改变禁带宽度的前提下实现对缺陷模的调节,改变晶格常数、介质圆柱半径和等离子体频率能同时实现对禁带宽度和缺陷模的调节. 关键词： 等离子体 光子晶体 缺陷模 时域有限差分算法     

Extension of photonic band gaps in one-dimensional photonic crystals

A method is proposed for extending photonic band gaps by constructing periodic structures from two or more consecutively located photonic crystals with different lattice constants or filling factors. The photonic band gaps with a maximum extension are predicted by superposing the photonic band gap maps on one another. It is demonstrated that both the lowest and higher order band gaps can be merged in photonic crystals with a high refractive index contrast.