A realization of digital wireless transmission for MRI signals based on 802.11b

In this paper, a digital wireless transmission system based on 802.11b standard for magnetic resonance imaging (MRI) application is designed and built for the first time to eliminate the interference aroused by coil array cables. The analysis shows that the wireless receiver has a very high sensitivity to detect MRI signals. The modulation technique of differential quadrature phase shift keyed (DQPSK) can be applied to MRI data transmission with rate of 2 Mbps and bandwidth of 2 MHz. The bench test verifies that this wireless link has a dynamic range over 86 dB supporting up to 3 T MRI system data transmission. The 2D spin echo imaging of phantom is performed and the SNR of the image obtained by the wireless transmission can be comparable with that got by the coaxial cables.     

Characteristics of radio transmission over polymer optical fiber for indoor wireless coverage

The characteristics of radio over polymer optical fiber (RoPOF) are evaluated for indoor or in-building wireless coverage. The frequency responses and the third order intermodulation distortion products of the RoPOF link are investigated. The eye diagrams and EVM values of signals carrying quadrature-phase-shift-keyed (QPSK) data and global system for mobile (GSM) signals are measured to evaluate the transmission performance. The interference measurements with FDM are also carried out. The results show that although the nonlinear distortion and power loss deteriorate the system to some extent, making use of passband transmission, RoPOF can provide fairly good transmission performance for wireless applications.     

Experiment on 60-GHz MMW transmission performance in an optical fiber and wireless system

We experimentally investigate the transmission performance of 60-GHz signals over standard single-mode fiber (SSMF) and wireless links at different bit rates. Experimental results show that in a transmission of over 10-km SSMF and 1.3-m wireless link, bit rate reaches up to 5 Gb/s and bit error rate (BER) is less than 10 4 . The main limiting factor in such radio-over-fiber (ROF) systems is intersymbol interferences caused by the so-called walk-off effect when BER is below 10 8 . In addition, a transmission of over 20-km SSMF without chromatic dispersion compensation is briefly investigated. For a BER of 10 8 , the optical penalty is 2 dB.     

Assessing the impact of physical layer techniques on ad hoc network performance

This article provides an overview on the topic of ad hoc network performance analysis, mainly from a physical layer standpoint. The emphasis of the paper is on how the individual link and network performance can be evaluated in an analytically tractable manner, such that design insights can be obtained and optimization over key parameters is possible. Our model is that of a large random network, where the wireless channel comprises path-loss and fading. Various physical layer factors are taken into account: the multiple-access (MA) scheme, such as direct-sequence (DS) CDMA and frequency-hopping (FH) CDMA; error correction coding such as Reed–Solomon (RS) or convolutional coding; coherent or noncoherent detection; the use of multiple-input, multiple-output (MIMO) techniques to enhance error protection or to increase the transmission rate. The performance of the network is evaluated and optimized in terms of useful metrics such as the network throughput, the information efficiency and the transmission capacity.     

Performance evaluation of path-averaged soliton pulses in loss-managed 10-Gbps soliton transmission link over a long haul

In this paper, the performance evaluation of path-averaged soliton transmission link for various performance measures viz. OSNR, optical power, extinction ratio, bit error rate (BER) and Q factor at different levels of noise figure and values of pulse width (FWHM) has been carried out. The performance of soliton transmission link is studied, taking into account soliton interaction, amplified spontaneous emission (ASE) noise and noise figure. The model presented considers interaction in a random sequence of solitons and the effect of the ASE noise added in each amplification stage. The influence of ASE noise, noise figure and pulse width with different amplifier spacing on the BER and quality factor has been investigated. It has been shown that these play dominant roles in degrading the performance measures. We have demonstrated the capability of path-averaged (guiding-centre) soliton for a long-haul distance of 17,000 km at a bit rate of 10 Gbps without ASE effect and noise figure in each amplifier span length of 500 km. The average value of quality factor is found to be 16.6 dB and the average BER is of the order of 10⁻¹² over the transmission distance of 17,000 km. Further, it has been investigated that a severe system penalty results on the inclusion of ASE effect and noise figure in order to achieve the same level of performance. Thus, the investigations ascertain that in order to maintain the same level of BER and Q factor, the amplifier spacing and total transmission distance reduce considerably.     

Spectral efficient hybrid wireless optical broadband access network (WOBAN) based on transmission of wireless MIMO OFDM signals over WDM PON

In this paper, a spectral efficient hybrid wireless optical broadband access network (WOBAN) is proposed and demonstrated based on the transmission of wireless multi-input multi-output orthogonal frequency division multiplexing (MIMO OFDM) signals over wavelength division multiplexing passive optical network (WDM PON). By using radio over fiber (ROF) techniques, the optical fiber is well adapted to propagate multiple wireless services having different carrier frequencies. It is a known fact that multiple wireless signals having the same carrier frequency cannot propagate over a single optical fiber at the same time, such as MIMO signals feeding multiple antennas in fiber wireless (FiWi) system. A novel optical single-sideband frequency translation technique is designed and simulated to solve this problem. This technique allows four pairs of wireless MIMO OFDM signals with the same carrier frequency for each pair to be transmitted over a single optical fiber by using one optical source per wavelength. The crosstalk between the different MIMO channels with the same frequency is eliminated, since each channel is upconverted on specified wavelength with enough channel spacing between them. Also the maximum crosstalk level between the different MIMO channels with different frequencies is very low around ?76 dB. The physical layer performance of the proposed WOBAN is analyzed in terms of the bit error rate (BER), error vector magnitude (EVM), and signal-to-noise ratio (SNR). The proposed WOBAN achieves 7.68 Gb/s data rate for 20 km for the optical back-end and 240 Mb/s for the outdoor wireless front-end.     

Adding channels with PSBT format at 40 Gbit/s in an existing 10 Gbit/s optical network

Until recently, the wavelength-division-multiplexed (WDM) transmission system has reached record capacities and distances due to innovations such as FEC (Forward Error Correction), distributed Raman amplification, new transmission fiber and advanced optical format. Optical-communication systems exclusively employed conventional On-Off Keying signals in either Non-Return-To-Zero (NRZ) or Return-To-Zero (RZ) format. Recently a number of advanced modulation formats have attracted attention. Some of these formats carry information through On-Off-Keying but also modulate the optical phase in order to enhance the robustness of signal to chromatic dispersion, optical filtering and non-linearities. Through extensive sets of simulation results, we showed that it is possible to replace a channel with higher bit-rate on existing DPSK or OOK at 10Gbit/s transmission link. Duobinary formats are ideal candidates to do it and are known for their low spectral range and high tolerance to residual chromatic dispersion. These particularities make them very attractive for both high bit rates and high distance-transmissions. Today, Phase Shaped Binary Transmission (PSBT) is considered as being the promising format for the deployment of 40Gbit/s technology on existing links at 10Gbit/s WDM long haul transmissions.     

Spin-dependent electron transport in a magnetic nanostructure with the δ-doping

We report on a theoretical study of spin-dependent electron transport in a magnetic nanostructure with the δ-doping. It is revealed that the transmission probability, the electron conductance and the spin-polarization obviously depend on the weight of the δ-doping. It is also revealed that the transmission probability and the spin-polarization (PT) both show a periodic profile with the increase of the length L₂. These interesting phenomena will be more helpful for understanding the experimental physical phenomena in δ-doping and for making new types of devices.     

Spontaneous chiral symmetry breaking for a U(N) gauge theory on a lattice

We study the breakdown of chiral invariance by calculating, in the infinite coupling, large-N limit, the generating functional of a U(N) gauge theory with one fermion, expressed on a lattice with the naive, chiral symmetric action. We compute the link integral over the gauge fields and the expression obtained after the integration over the fermions is recast under the form of a generating functional for bosonic fields. Then, a saddle-point method allows the calculation of the order parameter $\text{〈}\text{ψ}\text{ψ〉}$ for which a non-zero value signals the spontaneous breakdown of chiral symmetry. The analysis of the fluctuations around the saddle point allows one to exhibit the Goldstone modes corresponding to those global symmetries of the fermionic lattice action which are simultaneously broken.     

Performance evaluation of bi-directional passive optical networks in the scenario of triple play service

In this paper, the performance of bi-directional passive optical network (BPON) has been evaluated and compared at different bit rates in the scenario of triple play service. The triple-play service is realized as a combination of data, voice and video signals. This architecture is investigated for symmetrical data traffic for uplink and downlink transmission and its performance is also evaluated in terms of Q-factor and eye height at different transmission distance. The Q-factor results show the acceptable performance at 10 Gbps data rate for downstream and upstream transmission, as it accommodates 128 optical network units (ONUs). Further the proposed system's performance is compared with the current state-of-the-art PON architectures.     

Real-time 3D electromagnetic field measurement instrument with direct visualization

Nowadays, a wide variety of terminals are proposed to nomadic users. Generally these terminals provide wireless communication operating at frequencies between one and a few GHz. For technical reasons, including multiple access to the communication channel and battery autonomy, these terminals transmit only during very short periods i.e. transmission bursts. For a direct observation of certain characteristics of the transmitted signals radiated by such terminals, only a few measurement setups exist. This article proposes such a novel real-time 3D electromagnetic field measurement instrument with direct visualization. The prototype used for validation is based on an array of probes regularly attached on a non-conductive rigid loop which is put into fast rotation around the terminal under test. To cite this article: J. Rioult et al., C. R. Physique 10 (2009).     

Heterogeneous optical signal transmission using re-modulation in injection-locked Fabry-Perot laser diode for wired and wireless access network

The radio over fiber system that transmits different signals simultaneously for 30-GHz wireless and 1.25-Gb/s wired network is proposed. One sub-carrier of a double-sideband wireless signal is re-modulated by injection-locking technique using a Fabry-Perot laser diode (FP LD) to generate a wired signal. Since the condition of injection-locking varies with changes of the input optical power and the injected current of the FP LD, the BER performance of the wired signal is investigated according to the modulation depth of both the wireless and wired signals, respectively. The error-free transmission of both the wired signal and the wireless one are achieved after 23-km SSMF.     

Effect of sintering atmosphere on the electrical and optical properties of (ZnO)1−x(MnO2)x NTCR ceramics

Nominal composition of (ZnO)_1−x(MnO₂)_x (0.005≤x≤0.2) ceramics have been prepared by the standard solid-state reaction method in three different sintering atmospheres: Ar, air, and reductive atmosphere. The effect of sintering atmosphere on the electron spin resonance (ESR), negative temperature coefficient of resistivity (NTCR), and photoluminescence (PL) properties of (ZnO)_1−x(MnO₂)_x ceramics has been investigated in detail. The results demonstrate that the sintering atmosphere has significant effects on the ESR signals of (ZnO)_1−x(MnO₂)_x; the NTCR of the samples sintered in air is larger than those sintering in Ar and reductive atmosphere; the deep-level PL related to oxygen vacancy increases when sintered in the reductive atmosphere.     

Performance analysis of NRZ, RZ, CRZ and CSRZ data formats in 10 Gb/s optical soliton transmission link under the impact of chirp and TOD

This paper presents the performance analysis of non-return-to-zero (NRZ), return-to-zero (RZ), chirped return-to-zero (CRZ) and carrier suppressed return-to-zero (CSRZ) data formats in optical soliton transmission link under the impact of chirp and third-order dispersion (TOD). The performance of these data formats has been analyzed on the basis of certain performance metrics, viz, bit error rate (BER), Q² (dB), OSNR, eye opening, etc. It has been reported here that the performance of CRZ and CSRZ modulation format is better as compared to NRZ and RZ in a soliton transmission link. Further, CSRZ modulation format has been found to deliver optimum performance on the basis of performance evaluation metrics reported in this paper. In case of NRZ and CSRZ, comparatively narrow power spectrum has been observed. Best eye opening, highest value of Q² (dB) of 18 dB and lowest value of BER of the order of 10⁻¹⁶ has been reported in case of CSRZ among the considered data formats. The results have been obtained by varying noise figure from 3.0 to 9.0. No considerable effect of noise was observed. It was observed that at very narrow and ultra short pulse width, OSNR value suffers heavily and reduced to even negative values in dB, thus inducing a high degree of OSNR power penalty. The results were obtained by varying chirp factor from −0.6 to +0.6. Negative chirp resulted in improved OSNR as compared to positive chirp. RZ data format yielded a broader optical spectrum, comparatively low spectral efficiency and poor OSNR thus it was found that RZ format is not suitable for optical soliton transmission under the impact of chirp and TOD.     

Exchange coupling behavior in bimagnetic CoFe2O4/CoFe2 nanocomposite

In this work we report a study of the magnetic behavior of ferrimagnetic oxide CoFe₂O₄ and ferrimagnetic oxide/ferromagnetic metal CoFe₂O₄/CoFe₂ nanocomposite. The latter compound is a good system to study hard ferrimagnet/soft ferromagnet exchange coupled. Two steps were followed to synthesize the bimagnetic CoFe₂O₄/CoFe₂ nanocomposite: (i) first, preparation of CoFe₂O₄ nanoparticles using a simple hydrothermal method, and (ii) second, reduction reaction of cobalt ferrite nanoparticles using activated charcoal in inert atmosphere and high temperature. The phase structures, particle sizes, morphology, and magnetic properties of CoFe₂O₄ nanoparticles were investigated by X-Ray diffraction (XRD), Mossbauer spectroscopy (MS), transmission electron microscopy (TEM), and vibrating sample magnetometer (VSM) with applied field up to 3.0 kOe at room temperature and 50 K. The mean diameter of CoFe₂O₄ particles is about 16 nm. Mossbauer spectra revealed two sites for Fe³⁺. One site is related to Fe in an octahedral coordination and the other one to the Fe³⁺ in a tetrahedral coordination, as expected for a spinel crystal structure of CoFe₂O₄. TEM measurements of nanocomposite showed the formation of a thin shell of CoFe₂ on the cobalt ferrite and indicate that the nanoparticles increase to about 100 nm. The magnetization of the nanocomposite showed a hysteresis loop that is characteristic of exchange coupled systems. A maximum energy product (BH)_max of 1.22 MGOe was achieved at room temperature for CoFe₂O₄/CoFe₂ nanocomposites, which is about 115% higher than the value obtained for CoFe₂O₄ precursor. The exchange coupling interaction and the enhancement of product (BH)_max in nanocomposite CoFe₂O₄/CoFe₂ are discussed.     

Power penalty in multitone radio-over-fibre system employing direct and external modulation with optical amplifiers

This paper presents a multitone RoF system employing a central station and a remote antenna station to transmit modulated microwave or mm-wave signals. Two configurations of the system employing direct and external modulation are presented. First, at the central station, the modulating signal is directly and externally modulated at 1549.5 and 1550.5 nm, respectively, and the combined signal is then transmitted using wireless mode. In the second configuration, the combined signal is transmitted over 20 km to the remote antenna station using optical fibre connectivity. At the remote antenna station, both channel wavelengths are separated and amplified with an EDFA and SOA and are detected. The demonstration results show that there exists a small power penalty between the direct and the external modulation. But a large power penalty is reported depending upon the choice of optical amplifier viz. EDFA or SOA. Better performance is recorded in later case. The results also show that power is being distributed among the operating frequency and sidebands adjacent to it after transmission over a fibre link.     

Performance improvement by positioning DCF non-symmetrically in a periodic amplified re-circulating loop for long-haul optical soliton transmission link

In this paper, we have carried out simulative performance analysis by positioning the DCF non-symmetrically in a periodic amplified re-circulating loop for optical soliton transmission link over a long haul. The investigations indicate that relatively stable pulses can propagate in a mid-compensated optical soliton transmission over a long-haul dispersion-managed soliton regime in a fiber link with loss and periodic amplification by keeping the average dispersion small but non-zero. Here non-zero anomalous fiber dispersion equal to 6 ps/nm is maintained by inserting DCF in the beginning, middle and end of the fiber loop. Here it is demonstrated that solitons can propagate even when β₂ varies along the fiber length up to transmission distance of 18,000 km.     

A new k-interval selection technique for fast atmospheric radiance calculation in remote sensing applications

A new technique is proposed to generate the k-interval parameters, including the number of k-intervals, the equivalent absorption coefficients, and the quadrature weights when using the correlated k-distribution method for the computation of spectrally integrated three-dimensional (3D) atmospheric radiance. The main difference between the proposed technique and the traditional exponential sum fitting technique is that only quadrature weights are involved in the optimization process. To avoid the ill-conditioned problem in the proposed technique, the absorption coefficients with high value are dealt with by the delta log(k) (Δlog(k)) technique instead of involving them in the fitting procedure. The performance of the proposed technique is illustrated by radiance calculation results of cloudless and cloudy atmosphere for three different band settings. Results show that there are less relative errors with the proposed optimization technique than with the Δlog(k) technique under the same number of k-intervals. However, as the absorption becomes stronger, the performance of the proposed technique gradually decreases to the Δlog(k) technique. The relative root-mean-square error (RMSE) of radiance for 3D cloudy atmosphere can be controlled in less than 2% when the number of k-intervals is less than 10 particularly for weak absorption band, the RMSEs are less than 1% with only 6 terms.     

Capacity for non-Kolmogorov turbulent optical links with beam wander and pointing errors

The performance of optical wireless communication links depends strongly on the atmospheric conditions and the parameters of the link such as the propagation distance, the operation wavelength, jitter variance, attenuation coefficient and effective beam spot radius at the receiver. The analytical expression for the evaluation of the average capacity of optical wireless communication systems is derived, using the gamma-gamma distribution in the non-Kolmogorov atmosphere turbulence. The impact of atmospheric attenuation, beam wander and pointing errors on the average of the optical wireless communication link is investigated. It is shown that the capacity has a fluctuation curve, when power law α increases, and the power law α of minimum point in fluctuation curve is bigger as the non-Kolmogorov turbulence strength is stronger.