Dispersion optimization of slow light in slotted photonic crystal waveguide by selective air holes infiltration

This work proposed a methodology based on the liquid infiltration of slotted photonic crystal waveguide (SPCW). By choosing the refractive index that infiltrated in the first and second rows of air holes adjacent to the slot, respectively, SPCW was optimized to possess wideband slow light with large group index and low dispersion. The properties of SPCW were numerically simulated by plane wave expansion (PWE) method and finite-difference time-domain (FDTD) method. Simulation results showed that the designed SPCW could control the group index for the same SPCW with the nearly constant group index of 50, 68, 81, 150, and 200 over 7.5 nm, 5.5 nm, 3.1 nm, 1.65 nm, and 1.15 nm. In addition, we demonstrated that this post-fabrication liquid infiltrated technology has the potential for realizing reconfigurable and tunable SPCW, in which the flexible wavelength range of SPCW can also be controlled by different liquid infiltration.     

Liquid refractive index sensor based on slow light in slotted photonic crystal waveguide

A high sensitive and compact refractive index sensor based on slotted photonic crystal waveguide (S-PhCW) is demonstrated. This design is worked on a Mach–Zehnder interferometer (MZI) configuration with S-PhCW as the measuring arm, which can be used to detect any changes in refractive index that correspond to different concentration of the measuring liquid. Combining the slow light enhancement in photonic crystal waveguide (PhCW) with the advantage of excellent optical confinement in slot waveguide, the sensitivity of this simple scheme can reach to 2.3 × 10⁹ nm/RIU with the active region of only 1 mm long.     

Slotted Photonic Crystal Microring Resonators

We propose using a slotted photonic crystal nanobeam to construct a microring resonator. The transmission characteristics of the slotted photonic crystal nanobeam and the microring resonator are demonstrated by two-dimensional finite-difference time-domain simulation, and the mechanism of these characteristics is analyzed considering the introduction of the slot. The refractive index sensitivity of the slotted photonic crystal microring resonator is evaluated to be larger than those of a slot waveguide microring resonator and a nonslotted photonic crystal microring resonator.     

非线性一维光子晶体波导光双稳

利用非线性折射率系数较大且非线性时间响应较快的CdS_xSe_1-x玻璃为材料,设计并制备了非线性一维光子晶体波导光双稳器件,该器件的折射率空间分布呈正弦形式。实验测得双稳开关的阈值功率密度为1.60×10⁵W/cm²,开关时间为63ps。采用时域有限差分方法讨论了光子晶体带隙随入射光强变化而移动的情况,随着入射光功率密度的增加,光子晶体的带隙中心向短波方向移动。同时计算了该器件的双稳特性,理论计算得到双稳开关的阈值功率密度为1.40×10⁵W/cm²,开关时间约为50ps。获得了理论与实验基本一致的结果。     

Coupling loss minimization of slow light slotted photonic crystal waveguides using mode matching with continuous group index perturbation

We experimentally demonstrate highly efficient coupling into a slow light slotted photonic crystal waveguide. With optical mode converters and group index tapers that provide good optical mode matching and impedance matching, a nearly flat transmission over the entire guided mode spectrum of 68.8 nm range with 2.4 dB minimum insertion loss is demonstrated. Measurements also show up to 20 dB baseline enhancement and 30 dB enhancement in the slow light region, indicating that it is possible to design highly efficient and compact devices that benefit from the slow light enhancement without increasing the coupling loss.     

Wideband and low dispersion slow light in slotted photonic crystal waveguide

We present a procedure to generate wideband and low dispersion slow light in slotted photonic crystal waveguide. By shifting the first and second rows of air holes of slotted photonic crystal waveguide, the bandwidth of slow light can be increased, with small group velocity dispersion. Using 2D plane wave expansion method, we numerically demonstrate slow light with the nearly constant group indices of 23, 42, and 54 over 17.6 nm, 6.7 nm and 3.3 nm bandwidth, respectively. The maximal normalized delay-bandwidth product is 0.26. From the fabrication's point of review, shifting the position of holes is easier to be controlled technically than changing the diameters of air holes. In addition, our simulations suggest this design is tolerant to deviation for positions of the first two rows of air holes. Therefore, the proposed approach decreases the dependence on the fabrication accuracy.     

Linear and nonlinear properties of photonic crystal fibers filled with nematic liquid crystals

We investigate linear and nonlinear light propagation in the photonic crystal fibers infiltrated with nematic liquid crystals. Such a photonic structure, with periodic modulation of refractive index, which could be additionally controlled by the temperature and by the optical power, allows for the study of discrete optical phenomena. Our theoretical investigations, carried out with the near infrared wavelength of 830 nm, for both focusing and defocusing Kerr-type nonlinearity, show the possibility of the transverse light localization, which can result in the discrete soliton generation. In addition, we present the preliminary experimental results on the linear light propagation in the photonic crystal fiber with the glycerin-water solution and 6CHBT nematics, as the guest materials.     

The study of electro-optical sensor based on slotted photonic crystal waveguide

A compact and sensitive electro-optical sensor based on slotted photonic crystal waveguide (S-PhCW) is demonstrated. The electro-optical sensor can be realized in photonic crystal (PhC) slabs of silicon in Silicon-on-Insulator (SOI). Nonlinear optical polymer is used as infiltration. By applying three-dimensional finite difference time domain (3D-FDTD), the sensitivity and quality factor of electro-optical sensor with different slotted waveguide width are calculated. In addition, sensitivity and the optical properties such as transmission spectrum and field distributions are compared between electro-optical sensor based on line defect photonic crystal waveguide (W1-PhCW) and that based on slotted photonic crystal waveguide (S-PhCW). Simulation results demonstrate that, compared with electro-optical sensor based on line defect photonic crystal waveguide, the sensitivity and quality factor is improved by 30 times and 6.6 times respectively in sensor based on slotted photonic crystal waveguide. Besides, the proposed PhC sensor devices have the advantage of a compact structure with the potential for monolithic integration with optical-to-electrical on-chip conversion and detection.     

基于光子晶体马赫-曾德尔干涉仪的太赫兹开关及强度调制器

通过对二维正方晶格光子晶体线缺陷模色散曲线慢光特性的研究, 利用外电场对液晶分子取向的调控作用, 在填充液晶的正方晶格波导的马赫-曾德尔干涉仪结构中实现了开关和强度调制等功能. 利用平面波展开法计算了光子晶体波导的线缺陷模, 分析了液晶折射率的变化对缺陷模的影响. 计算表明, 液晶折射率仅改变了0.1, 线缺陷模有效折射率改变达0.168, 该特性可以更为有效地实现对相位的控制, 进而实现高消光比开关和强度调制功能, 这种高效的相位调节器件在集成光系统中将有很好的应用前景.     

激光泵浦碲化物产生中红外超连续谱数值模拟

对2 m波段脉冲激光泵浦碲化物光子晶体光纤产生中红外超连续谱进行了数值研究。通过材料的拉曼增益谱间接求得了对应的拉曼响应函数;由光子晶体光纤的材料折射率和波导结构,通过COMSOL软件获得了碲化物光子晶体光纤中基模等效折射率,计算了相应的色散曲线和限制损耗 ;利用自适应的分步傅里叶算法,模拟了中心波长为1.96m、峰值功率为20 kW的50 fs脉冲光泵浦碲化物光子晶体光纤时超连续谱的产生,当光纤长度为6 cm时,产生的中红外超连续谱波长范围为1.0~4.5 m。     

一种基于光子晶体异质结构的新型多通道波分复用器

在二维三角光子晶体环形腔的周围增加六个散射介质柱,构成一个新的环形腔结构,该结构使光波的透射率达到90%,带宽也比较小。通过改变光子晶体介质柱的折射率,使环形腔的选择波长不断改变,能够明显地区分出两个不同波长,且分波波长在通信波长范围之内。将不同折射材料的光子晶体连接在一起,构成一种新的光子晶体波分复用器,相比同种材料,它具有高效率,多波长选择的优点。利用这种异质结构可以构建一个多波长的波分复用结构,它也为制作多通道波分复用器奠定了基础。     

High sensitivity photonic crystal waveguide sensors

A theoretical investigation of the sensitivity of an optical liquid sensor, based on photonic crystal waveguide, is carried out. The sensing principle is based on the variation of the effective index of the waveguide induced by analyte refractive index change. The sensor modelling is carried out by using the 3D finite element method. The influence of geometrical parameters on the sensor sensitivity has been investigated. The results show that the sensitivity can be optimized by an appropriate choice of the geometrical parameters and a sensitivity superior to 20 has been achieved, near the cut-off in the slow light region, which is several times higher than that can be achieved with conventional waveguides.     

Nonlinear performance in silicon nitride slow light photonic crystal waveguides with elliptical holes

We propose a slow-light photonic crystal waveguide, which uses a combination of circular and elliptical air holes arranged in a hexagonal lattice with the background material of silicon nitride (refractive index n = 2.06). Large value of normalized delay bandwidth product (NDBP = 0.3708) is obtained. We have analyzed nonlinear performance of the structure. With our proposed geometry strong SPM is observed at moderate peak power levels. Proposed photonic crystal waveguide has slow light applications such as reduction in length and power consumption of all-optical and electro-optic switches at optical frequency.     

高透射率慢光速的光子晶体耦合腔波导的研究

将二维三角晶格光子晶体波导和微腔结构结合,优化设计了一种二维三角晶格光子晶体共振耦合腔波导,运用时域有限差分法(FDTD)模拟共振耦合腔波导TE偏振光的透射谱,通过透射谱得到传输光的透射率和群速度。结果表明,合适参数的二维三角晶格共振耦合腔波导在波长1.551μm处的群速度为c/130、透射率为20.1%,在波长1.502μm处的群速度为c/50、透射率为29.2%。运用平面波展开法(PWE)计算的该波导的能带结构对慢光特性进行了分析。这种慢光特性的光子晶体波导将在光存储、光延迟及光子集成等方面有潜在的应用价值。     

Coupling into the slow light mode in slab-type photonic crystal waveguides

Coupling external light signals into a photonic crystal (PhC) waveguide becomes increasingly inefficient as the group velocity of the waveguiding mode slows down. We have systematically studied the efficiency of coupling in the slow light regime for samples with different truncations of the photonic lattice at the coupling interface between a strip waveguide and a PhC waveguide. An inverse power law dependence is found to best fit the experimental scaling of the coupling loss on the group index. Coupling efficiency is significantly improved up to group indices of 100 for a truncation of the lattice that favors the appearance of photonic surface states at the coupling interface in resonance with the slow light mode.     

液晶-金属光子晶体波导的光学特性

运用时域有限差分方法分析了二维液晶-金属光子晶体波导的光学特性。二维正方晶格金属光子晶体波导位于两个电极之间,其背景介质为液晶。通过在电极上施加不同电压,电场诱导液晶取向以改变液晶的折射指数从而改变光子晶体的带隙结构。数值计算结果表明:通过外界电场控制所填充的向列相液晶的方向可以对这种金属光子晶体波导的光学特性进行调节,该波导可用于制作光子晶体光开关等光学器件。     

晶格旋转光子晶体Mach-Zehnder干涉结构传感特性

基于光子晶体的自准直效应,利用在同一背景折射率下不同介质柱的等效折射率的不同,提出了一种基于晶格旋转的二维光子晶体Mach-Zehnder干涉仪折射率传感器。分别应用线缺陷和空气平板波导构成其分束镜和全反镜,并在其中一个干涉臂上设置传感区域。通过改变填充到传感区域溶液的浓度,改变介质柱的折射率,进而影响透射谱的中心波长,从而建立起溶液浓度和透射波长之间的数学关系;并进行了酒精溶液浓度测量的数值模拟,结果表明,该传感器在1.33~1.37折射率变化范围内灵敏度为250nm/RIU。     

Photonic crystal waveguides utilizing a modulated lattice structure

We experimentally demonstrate a new class of optical waveguide consisting of a-Si/SiO(2) autocloned photonic crystals with modulated lattice structure. The waveguide utilizes the macroscopic form birefringence of photonic crystals and confines light by the difference in the effective refractive index. A monopole modal field with spot diameters of 6.9 micromx6.5 microm was observed at a wavelength of 1.55 microm. The propagation loss of the waveguide at the wavelength was found to be ~4.2 dB/mm at most.     

Dual-frequency division de-multiplexer based on cascaded photonic crystal waveguides

A dual-frequency division de-multiplexing mechanism is demonstrated using cascaded photonic crystal waveguides with unequal waveguide widths. The de-multiplexing mechanism is based on the frequency shift of the waveguide bands for the unequal widths of the photonic crystal waveguides. The modulation in the waveguide bands is used for providing frequency selectivity to the system. The slow light regime of the waveguide bands is utilized for extracting the desired frequency bands from a wider photonic crystal waveguide that has a relatively larger group velocity than the main waveguide for the de-multiplexed frequencies. In other words, the wider spatial distribution of the electric fields in the transverse direction of the waveguide for slow light modes is utilized in order to achieve the dropping of the modes to the output channels. The spectral and spatial de-multiplexing features are numerically verified. It can be stated that the presented mechanism can be used to de-multiplex more than two frequency intervals by cascading new photonic crystal waveguides with properly selected widths.     

一种紧凑的、可调的、基于缺陷共振的光开关

采用平面波展开法(PWM)和时域有限差分(FDTD)法,研究光在含点缺陷的光子晶体波导中的传输特性.计算结果表明,通过引入两共振腔(点缺陷),处于共振频率附近的光波将被完全反射回光子晶体波导.由于共振频率随点缺陷的折射率的变化而改变,这种现象可用来设计可调光开关. 关键词： 光子晶体波导 缺陷共振 光开关 透射率