One‐step polymerization of hydrophilic ionic liquid imprinted polymer in water for selective separation and detection of levofloxacin from environmental matrices

A novel green hydrophilic levofloxacin imprinted polymer was presented via one‐step polymerization in water using ionic liquid 1,6‐hexa‐3,3′‐bis‐1‐vinylimidazolium bromine with multiple hydrophilic groups and 2‐hydroxyethyl methacrylate as a co‐functional monomer. Adsorption experiment revealed that the ionic liquid significantly improved the water compatible of imprinted polymer, and the excellent recognition of molecularly imprinted polymer for levofloxacin in water corresponds to the synergetic effect of H‐bonding and the electrostatic and π–π interactions between the levofloxacin and co‐functional monomer. Furthermore, the adsorption process of the imprinted material towards levofloxacin fitted the Langmuir model, and the maximum binding amount of levofloxacin onto the imprinted and corresponding non‐imprinted polymer were 16.45 and 6.82 mg/g at 25°C, respectively. After optimizing the parameters affecting solid phase extraction performance, an enrichment and determination system was achieved to separate and detect levofloxacin from water and sediment samples with recoveries that ranged from 83.67 to 101.33% and relative standard deviation of less than 5.59%.     

Simultaneous determination of levofloxacin and ciprofloxacin in human urine by ionic‐liquid‐based,dual‐template molecularly imprinted coated graphene oxide monolithic solid‐phase extraction

A novel method was developed to simultaneously determine the ciprofloxacin and levofloxacin levels in human urine using an ionic‐liquid‐based, dual‐molecularly imprinted polymer‐coated graphene oxide solid‐phase extraction monolithic column coupled with high‐performance liquid chromatography. The molecularly imprinted monolithic column was prepared using ciprofloxacin and levofloxacin as templates, 1‐vinyl‐3‐ethylimidazolium bromide as the functional monomer, and graphene oxide as the core material. The resulting imprinted monoliths were characterized by scanning electron microscopy and fourier transform‐infrared spectroscopy. The efficiency and capacity of the ionic‐liquid‐based imprinted monolithic column were investigated by varying the synthesis conditions (ciprofloxacin/levofloxacin ratio and template/functional monomer/cross‐linker ratio). The solid‐phase extraction process was optimized by changing the washing and eluting conditions. The results suggested that the proposed ionic‐liquid‐based molecularly imprinted solid‐phase extraction monolithic‐high‐performance liquid chromatography method could separate ciprofloxacin and levofloxacin efficiently and simultaneously from human urine. The mean recoveries of ciprofloxacin and levofloxacin ranged from 89.2 to 93.8 and 86.7 to 94.6%, respectively. The intra‐ and interday relative standard deviation ranged from 0.9 to 3.2 and 0.8 to 2.9%, respectively. Under the optimized conditions, the recoveries of ciprofloxacin and levofloxacin were more than 93.8%.     

Novel molecularly imprinted magnetic nanoparticles for the selective extraction of protoberberine alkaloids in herbs and rat plasma

In this work, a novel magnetic nanomaterial functionalized with a molecularly imprinted polymer was prepared for the extraction of protoberberine alkaloids. Molecularly imprinted polymers were made on the surface of Fe₃O₄ nanoparticles by using berberine as template, acetonitrile/water as porogen, acrylamide as functional monomer and ethylene glycol dimethacrylate as cross‐linker. The optimized molar ratio of template/functional monomer was 1:7. The polymeric magnetic nanoparticles were characterized by transmission electron microscopy and Fourier transform infrared spectroscopy. The stability and adsorption capacity of the molecularly imprinted polymers were investigated. The molecularly imprinted polymers were used as a selective sorbent for the magnetic molecularly imprinted solid‐phase extraction and determination of jatrorrhizine, palmatine, and berberine. Extraction parameters were studied including loading pH, sample volume, stirring speed, and extraction time. Finally, a magnetic molecularly imprinted solid‐phase extraction coupled to high‐performance liquid chromatography method was developed. Under the optimized conditions, the method showed good linear range of 0.1–150 ng/mL for berberine and 0.1–100 ng/mL for jatrorrhizine and palmatine. The limit of detection was 0.01 ng/mL for berberine and 0.02 ng/mL for jatrorrhizine and palmatine. The proposed method has been applied to determine protoberberine alkaloids in Cortex phellodendri and rat plasma samples. The recoveries ranged from 87.33–102.43%, with relative standard deviation less than 4.54% in Cortex phellodendri and from 102.22–111.15% with relative standard deviation less than 4.59% in plasma.     

Iron(III) porphyrin catalyzed ionic liquid mediated polymerization of methylmethacrylate

A novel application of iron(III)porphyrin catalyst, 5,10,15,20 ? tetrakis ? (2′,6′‐dichlorophenyl)porphyrinatoiron(III) chloride is reported for the reaction of methyl methacrylate with hydrogen peroxide in imidazolium ionic liquids at ambient temperature. The reaction furnished polymethyl methacrylate in 75–94% yields. The yield of the polymer was optimized upon changing the reaction media, ratio of catalyst, oxidant and substrate, reaction time and quenchers. The polymethyl methacrylate was secured as highly stereoregular with predominantly syndiotactic sequences as analyzed with the aid of NMR (¹H and ¹³C) and infrared spectroscopy. Besides, the number‐average molecular weights (Mn) were attained in the range of 15,000 to 55,000 with narrow polydispersity (~1.1–1.9) as calculated using gel permeable chromatography (GPC).     

Surface‐imprinted magnetic nanoparticles for the selective enrichment and fast separation of fluoroquinolones in human serum

Surface enrofloxacin‐imprinted magnetic nanoparticles were prepared for the selective recognition and fast separation of fluoroquinolones in human serum by surface‐initiated reversible addition fragmentation chain transfer polymerization. The surface morphology and imprinted behavior were investigated and optimized. The living/controlled nature of reversible addition‐fragmentation chain transfer polymerization reaction allowed the successful construction of well‐defined imprinted polymer layer outside the Fe₃O₄ core. Such molecularly imprinted polymers exhibited superparamagnetic properties and specific recognition toward fluoroquinolones. Combined with reversed‐phase high‐performance liquid chromatography, the prepared molecularly imprinted polymers were used for the selective enrichment and analysis of fluoroquinolones in human serum samples. The recoveries of four fluoroquinolones were 86.8–95.3% with relative standard deviations of 2.0–6.8% (n  = 3). Such magnetic molecularly imprinted polymers have great prospects in the separation and enrichment of trace analysts in complex biological samples.     

Removal of cefalexin using yeast surface‐imprinted polymer prepared by atom transfer radical polymerization

The first use of yeast as a support in the molecular imprinting field combined with atom transfer radical polymerization was described. Then, the as‐prepared molecularly imprinted polymers were characterized by Fourier transmission infrared spectrometry, scanning electron microscope, thermogravimetric analysis, and elemental analysis. The obtained imprinted polymers demonstrated elliptical‐shaped particles with the thickness of imprinting layer of 0.63 μm. The batch mode experiments were adopted to investigate the adsorption equilibrium, kinetics, and selectivity. The kinetic properties of imprinted polymers were well described by the pseudo‐second‐order kinetic equation, indicating the chemical process was the rate‐limiting step for the adsorption of cefalexin (CFX). The equilibrium data were well fitted by the Freundlich isotherm, and the multimolecular layers adsorption capacity of imprinted polymers was 34.07 mg g^?1 at 298 K. The selectivity analysis suggested that the imprinted polymers exhibited excellent selective recognition for CFX in the presence of other compounds with related structure. Finally, the analytical method based on the imprinted polymers extraction coupled with high‐performance liquid chromatograph was successfully used for CFX analysis in spiked pork and water samples.     

Macromolecular Crowding Agents‐Assisted Imprinted Polymers For Analysis Of Glycocholic Acid In Human Plasma And Urine

Glycocholic acid (GCA) is a newly identified biomarker for hepatocellular carcinoma (HCC) patients. In this study, a method based on macromolecular crowding strategy has been applied for preparation of a molecularly imprinted polymer (MIP), which possesses high adsorption capacity for GCA. Polymethyl methacrylate was used as a macromolecular crowding agent, N‐(3‐aminopropyl)‐methacrylamide hydrochloride as a functional monomer and ethylene dimethacrylate as a cross‐linker. The morphology and binding characteristics of MIP were assessed by scanning electron microscopy and absorption experiments. The MIP was used as an adsorbent material to separate GCA, and the molecularly imprinted solid‐phase extraction (MISPE) was carefully optimized. The MISPE combined with high‐performance liquid chromatographic analysis was successfully used to determine the GCA in plasma and urine samples. When spiked levels ranged from 0.2 to 20 μmol L^?1, the recoveries were between 94.3 and 100.5%. As a proof of principle, this proposed method has been validated on a small subset of HCC patients (n = 10) and healthy volunteers (n = 10). The average GCA concentrations of HCC patients in plasma and urine were about 25 and 2.8 times than that of healthy volunteers. Copyright © 2016 John Wiley & Sons, Ltd.     

Preparation and characterization of imprinted microspheres for clopyralid

In this work, the molecularly imprinted polymers (MIPs) and non-imprinted polymers (NIPs) for clopyralid (3,6-DCP) were successfully synthesized via precipitation polymerization using methacrylic acid (MAA) as functional monomer, ethylene glycol dimethacrylate (EGDMA) as crosslinker and a mixture of butanone (MEK) and n-heptane as porogen under the existence of azobisisobutyronitrile (AIBN). The morphologies, particle sizes, structures, adsorption properties and selective recognitions of polymers were investigated systematically. The average particle sizes of MIP3 and NIP3 were 2.76 μm and 2.15 μm. The apparent maximum binding amount (Q_max) of MIP3 and NIP3 were 67.50 mg·g^?1 and 65.02 mg·g^?1 in Scatchard analysis. Langmuir isotherm displayed that the Langmuir constant (K_l) of MIP3 and NIP3 were 0.015 L·mg^?1 and 0.0065 L·mg^?1, the saturation adsorption capacity (Q_max) of MIP3 and NIP3 were 63.23 mg·g^?1 and 58.17 mg·g^?1. Lagergren pseudo-second-order kinetic plot described that the adsorption process of MIP3 was visualized as chemical absorption. Selectivity analysis revealed that MIP3 possessed highly specific recognition for 3,6-DCP.     

Preparation of a stoichiometric molecularly imprinted polymer for auramine O and application in solid‐phase extraction

We describe a stoichiometric approach to the synthesis of molecularly imprinted polymers specific for auramine O. Using the stoichiometric interaction in molecular imprinting, no excess of binding sites is necessary and binding sites are only located inside the imprinted cavities. The free base of the template was obtained to facilitate the interaction with the monomers. Itaconic acid was selected as the functional monomer, and stoichiometric ratio of the interaction with the free base was investigated. The molecularly imprinted polymer preparation conditions such as cross‐linker, molar ratio, porogen were optimized as divinylbenzene, 1:2:20 and chloroform/N,N‐dimethylformamide, respectively. Under the optimum conditions, a good imprinting effect and very high selectivity were achieved. A solid‐phase extraction method was developed using the molecularly imprinted polymers as a sorbent and extraction procedure was optimized. The solid‐phase extraction method showed a high extraction recovery for auramine O in its hydrochloride form and free form compared to its analogues. The results strongly indicated that stoichiometric imprinting is an efficient method for development of high selectivity molecularly imprinted polymers for auramine O.     

Orthogonal array optimization of ionic liquid based dispersive liquid-liquid microextraction for toxic anilines in foods

A simple and rapid method of ionic liquid based dispersive liquid-liquid microextraction(DLLME) combining with high performance liquid chromatography(HPLC) was developed for the analysis of four toxic anilines in flour steamed bread and maize steamed bread.Several possible influential factors such as the type of ionic liquid and disperser solvent,extraction time,sample pH,ionic strength and the volume of ionic liquid and disperser solvent were optimized using single factor experiments and orthogonal array design(OAD) with OA 25(5 4) matrix.Analysis of variance(ANOVA) and percent contribution(PC) were used to investigate the significance of the factors of OAD.Sample pH and ionic strength are statistically demonstrated two chief factors.Under the optimum condition,the method exhibits a good linearity(r 2 > 0.99) over the studied range(50-1000 ng g 1) for anilines.The extraction factors and recoveries for the anilines in two kinds of steamed breads ranged between 34.1%-73.3% and 44.3%-95.3%,respectively.The limit of detections(LODs) and limit of quantitations(LOQs) ranged between 10-15 ng g 1 and 30-45 ng g-1.     

Development of a molecularly imprinted solid‐phase extraction sorbent for the selective extraction of telmisartan from human urine

A novel molecularly imprinted solid‐phase extraction with spectrofluorimetry method has been developed for the selective extraction of telmisartan from human urine. Molecularly imprinted polymers were prepared by a noncovalent imprinting approach through UV‐radical polymerization using telmisartan as a template molecule, 2‐dimethylamino ethyl methacrylate as a functional monomer, ethylene glycol dimethacrylate as a cross‐linker, N,N‐azobisisobutyronitrile as an initiator, chloroform as a porogen. Molecularly imprinted polymers and nonimprinted control polymer sorbents were dry‐packed into solid‐phase extraction cartridges, and eluates from cartridges were analyzed using a spectrofluorimeter. Limit of detection and limit of quantitation values were 11.0 and 36.0 ng/mL, respectively. A very high imprinting factor (16.1) was achieved and recovery values for the telmisartan spiked in human urine were in the range of 76.1–79.1%. In addition, relatively low within‐day (0.14–1.6%) and between‐day (0.11–1.31%) precision values were obtained. Valsartan was used to evaluate the selectivity of sorbent as well. As a result, a sensitive, selective, and simple molecularly imprinted solid‐phase extraction with spectrofluorimetry method has been developed and successfully applied to the direct determination telmisartan in human urine.     

Determination of Silver in Human Hair by Ionic Liquid‐based Cold‐induced Aggregation Microextraction as a Solvent Extraction Method

We report on the determination of silver ion in human hair sample using ionic liquid cold‐induced aggregation combined with spectrophotometric detection. Parameters governing the extraction efficiency (such as concentration of ligand, volume of ionic liquid, pH, temperature, extraction time) were optimized and resulted in enrichment factor of 44.4 for silver ion. The calibration curve was linear with correlation coefficient (R²) of 0.999, in the concentration range from 1.0 to 20 ng mL^?1. The relative standard deviation is 2.3% (for n = 10), the limit of detection is 0.262 ng mL^?1, and relative recoveries in real samples were more than 93%.     

Computer‐assisted design and synthesis of molecularly imprinted polymers for the simultaneous determination of six carbamate pesticides from environmental water

The computer‐assisted design and synthesis of molecularly imprinted polymers for the simultaneous capture of six carbamate pesticides from environmental water are reported in this work. The quantum mechanical computational approach was employed to design the molecularly imprinted polymers with carbofuran as template. The interaction energies between the template molecule and different functional monomers in various solvents were calculated to assist in the selection of the functional monomer and porogen. The optimised molecularly imprinted polymer was subsequently used as a class‐selective sorbent in solid‐phase extraction for pre‐concentration and determination of carbamates from environmental water. The parameters influencing the extraction efficiency of the molecularly imprinted solid‐phase extraction procedure were systematically investigated to facilitate the class‐selective extraction. For the proposed method, linearity was observed over the range of 2–500 ng/mL with the correlation coefficient ranging from 0.9760 to 1.000. The limits of detection ranged from 0.2 to 1.2 ng/mL, and the limit of quantification was 4 ng/mL. These results confirm that computer‐assisted design is an effective evaluation tool for molecularly imprinted polymers synthesis, and that molecularly imprinted solid‐phase extraction can be applied to the simultaneous analysis of carbamates in environmental water.     

Magnetic Molecularly Imprinted Polymer Preconcentration of 4-Chlorophenol with Determination by High-Performance Liquid Chromatography

A novel magnetic dummy molecularly imprinted polymer based on multiwalled carbon nanotubes was prepared with 2-amino-4-chlorophenol as the dummy template for rapid separation and enrichment of 4-chlorophenol in aqueous samples. The magnetic dummy molecularly imprinted polymer was characterized by infrared spectroscopy, transmission electron microscopy, scanning electron microscopy, and vibrating sample magnetometry. The saturation adsorption capacity of the magnetic dummy molecularly imprinted polymer toward 4-chlorophenol was up to 54.3?mg?g^?1 at 298?K, which is higher than for previously reported imprinted polymers. The magnetic dummy molecularly imprinted polymers were coupled with high-performance liquid chromatography to isolate and determine 4-chlorophenol in fish bile and river water with the recoveries from 95.8 to 98.9% and 96.6 to 99.1%, respectively.     

Evaluation of 2-hydroxyethyl methacrylate as comonomer in the preparation of water-compatible molecularly imprinted polymers for triazinic herbicides

In this work, the preparation and evaluation of water-compatible molecularly imprinted polymers for triazines using 2-hydroxyethyl methacrylate and methacrylic acid as comonomers is described. Four sets of molecularly imprinted and non-imprinted polymers for propazine were prepared at varying monomer molar ratios (from 4:0 to 1:3), and evaluated for the recognition of several triazines directly in aqueous media. The evaluation was performed by loading 1 mL of an aqueous solution containing 500 ng of each selected triazine, washing with 500 μL of acetonitrile, and eluting with 500 μL of methanol followed by 2 × 500 μL of a solution of methanol containing 10% of acetic acid. Final determinations were performed by high-performance liquid chromatography-ultraviolet detection. Improvement in molecular recognition of triazines in water was obtained on those molecularly imprinted polymers incorporating 2-hydroxyethyl methacrylate in 3:1 or 2:2 molar ratios, being the former selected as optimum providing recoveries for propazine up to 80%. A molecularly imprinted solid-phase extraction protocol was developed to ensure that triazines-selective recognition takes place inside selective binding sites in pure water media. Finally, the developed method was successfully applied to the determination of the selected triazines in environmental waters providing limits of detection from 0.16 and the 0.5 μg/L concentration range.     

Simultaneous determination of fluoroquinolone and tetracycline antibacterials in sewage sludge using ultrasonic-assisted extraction and HPLC-MS/MS

A reliable method was proposed for the simultaneous determination of five fluoroquinolones (FQs) and two tetracyclines (TCs) in sewage sludge using ultrasonic-assisted extraction (USE) followed by SPE cleanup and high-performance liquid chromatography-mass spectrometry (HPLC-MS)/MS analysis with electrospray ionisation (ESI) in a positive mode. The USE conditions (e.g. extraction solvent, pH, and extraction cycles) and high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) parameters were optimised. Quantification was performed by internal standard calibration in multiple reaction monitoring mode. Recoveries of the antibacterials ranged from 41 to 123%, with relative standard deviations within 17%. The sample-based limits of quantification were 10–63?ng?g^?1 dry weight (dw) for FQs (ciprofloxacin, enrofloxacin, lomefloxacin, norfloxacin, and ofloxacin) and 250–500?ng?g^?1 dw for TCs (tetracycline and oxytetracycline). The method was applied to determine the antibacterials in sewage sludge and sediment samples were collected from the Pearl River Delta, China. Ciprofloxacin, norfloxacin, and ofloxacin were frequently detected, ranging from 1052 to 17740?ng?g^?1 dw in dewatered sludge samples, 585–3545?ng?g^?1 dw in untreated solids, and 98–258?ng?g^?1 dw in an urban stream sediment sample, respectively. Lomefloxacin and enrofloxacin were also occasionally detected.     

Determination of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) in food and beverages

The determination of perfluorooctanoic acid (PFOA) and perfluorooctanesulfonate (PFOS) in food and beverages sold in Turkey was carried out using liquid chromatography–tandem mass spectrometry (LC-MS/MS). A total of 123 samples of selected food and beverages such as fish, meat, offal, egg, cracker, chips, cake, chocolate, vegetable, milk and juice were examined. The highest PFOA concentrations were determined in cow meat (5.15 ng g^?1), cow kidney (5.65 ng g^?1), cow spleen (5.06 ng g^?1) and chicken liver (5.02 ng g^?1). The highest PFOS levels were found in horse mackerel (52.43 ng g^?1), pike-perch (45.87 ng g^?1), sardine (42.83 ng g^?1) and black cod (41.33 ng g^?1). Fish was found to be major source of the PFOS intake, while meat and offal were found to be major sources of the PFOA intake.     

Magnetic molecularly imprinted polymer for the efficient and selective preconcentration of diazinon before its determination by high‐performance liquid chromatography

A molecularly imprinted polymer was selectively applied for solid‐phase extraction and diazinon residues enrichment before high‐performance liquid chromatography. Diazinon was thermally copolymerized with Fe₃O₄@polyethyleneglycol nanoparticles, methacrylic acid (functional monomer), 2‐hydroxyethyl methacrylate (co‐monomer), and ethylene glycol dimethacrylate (cross‐linking monomer) in the presence of acetonitrile (porogen) and 2,2‐azobisisobutyronitrile (initiator). Then, the imprinted diazinon was reproducibly eluted with methanol/acetic acid (9:1, v/v). The sorbent particles were characterized by X‐ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy. The comprehensive study of variables through experimental design showed that the maximum performance was achieved under these conditions: pH 7, 10 mL sample volume, 15 mg sorbent, 10 min vortex time, 5 min ultrasonic time, 200 μL methanol/acetic acid (9:1, v/v) as eluent, and 5 min desorption time. Under optimized conditions, the molecularly imprinted polymer solid‐phase extraction method demonstrated a linear range (0.02–5 g/mL), a correlation coefficient of 0.997, and 0.005 g/mL detection limit.     

Combined biocompatible medium with molecularly imprinted polymers for determination of aflatoxins B1 in real sample

A kind of molecularly imprinted polymers modified with biocompatible medium was prepared by suspension polymerization. The obtained hybrid materials were used as the adsorbents for the solid‐phase extraction of aflatoxins B1 in real samples. A structural analog of the target, 6‐methyl‐4‐phenylchroman‐2‐one was used as the pseudo‐template, owing to their lower toxicity and cheaper price compared with aflatoxins B1; and methacrylic acid and glycidyl methacrylate were used as the co‐monomers. Scanning electron microscopy and size distribution analysis were used to characterize the obtained polymers. The extraction parameters were optimized to achieve the desired extraction performance. The polymer solid‐phase extraction coupled with high‐performance liquid chromatography was successfully applied to determine aflatoxins B1 from soy sauce without the process of protein removal. Under the optimum extraction conditions, the detection results of aflatoxins B1 in lab‐made column in soy sauce samples was carried out, with a recovery rate of 96%. The established method presented a linear range from 10 to 1000 ng/mL with the coefficient of determination of 0.9994 and the limit of detection of 0.05 ng/mL. Likewise, the inherent selectivity of lab‐made column towards aflatoxins B1, Ochratoxin A, and Zearalenone was demonstrated.     

Synthesis of graft copolymers onto styrenic polymer backbone via “grafting from” raft process

A new synthetic methodology is developed for preparing graft copolymers via RAFT polymerization method by the “R group approach” onto styrenic polymers. In this approach, latent sites of the styrenic polymer was brominated first and then converted into macro‐RAFT agents with pyrazole and thio dodecyl as the Z groups. This was used to synthesize graft copolymer such as polystyrene‐graft‐polymethyl methacrylate (PS‐g‐PMMA), polystyrene‐graft‐poly(isobornyl acrylate), polystyrene‐graft‐poly[2‐(acetoacetoxy)ethyl methacrylate] (PS‐g‐PAEMA), and poly(para‐methoxystyrene)‐graft‐polystyrene (P(p‐MS)‐g‐PS). The polymers are characterized by gel permeation chromatography, ¹H NMR, IR, and atomic force microscopy (AFM). The morphology of PS‐g‐PMMA in THF was investigated using AFM and island‐like features were noticed. The AFM studies of the PS‐g‐PAEMA graft copolymers revealed the formation of globules and ribbon‐like morphological features. The PS‐g‐PAEMA graft copolymers form complex with Fe(III) in dimethylformamide and the AFM studies suggest the formation of globular superstructures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012