Application of Nafion／Cobalt Hexacyanoferrate Chemically Modified Electrodes for the Determination of Electroinactive Cations by Ion Chromatography

Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｉｏｎｃｈｒｏｍａｔｏｇｒａｐｈｙ (ＩＣ)ｈａｓｂｅｅｎｒｅｃｏｇｎｉｚｅｄａｓａｕｓｅｆｕｌｍｅｔｈｏｄｆｏｒｔｈｅｓｅｐａｒａｔｉｏｎｏｆｉｎｏｒｇａｎｉｃａｎｉｏｎｓａｎｄｃａｔｉｏｎｓｓｉｎｃｅｉｔｓｉｎｔｒｏｄｕｃｔｉｏｎｂｙＳｍａｌｌｅｔａｌ .ｉｎ 1975 .1ＡｓｉｇｎｉｆｉｃａｎｔｔｒｅｎｄｉｎｔｈｅｄｅｖｅｌｏｐｍｅｎｔｏｆＩＣｍｅｔｈｏｄｉｓｓｅａｒｃｈｆｏｒｓｅｎｓｉｔｉｖｅａｎｄｕｎｉｖｅｒｓａｌｄｅｔｅｃｔｉｏｎｍｅｔｈｏｄｓ .Ｔｈｅｍａｉｎｄｅｔ…     

Xanthine Biosensor Based on Didodecyldimethylammonium Bromide Modified Pyrolytic Graphite Electrode

ＩｎｔｒｏｄｕｃｔｉｏｎＯｒｄｅｒｅｄｆｉｌｍｓｏｆｗａｔｅｒ ｉｎｓｏｌｕｂｌｅｓｕｒｆａｃｔａｎｔｓｃａｎｂｅｐｒｅｐａｒｅｄｂｙｃａｓｔｉｎｇｔｈｅｉｒｓｏｌｕｔｉｏｎｓｏｒｄｉｓｐｅｒｓｉｏｎｓｏｎｔｏａｓｏｌｉｄｓｕｐｐｏｒｔ .1Ｅｖａｐｏｒａｔｉｏｎｏｆｔｈｅｓｏｌｖｅｎｔａｆｔｅｒｃａｓｔｉｎｇｌｅａｖｅｓｔｈｉｎｆｉｌｍｓｅｌｆ ａｓｓｅｍｂｌｅｄｉｎｔｏｏｒｄｅｒｅｄｓｔａｃｋｏｆｂｉ ｌａｙｅｒ ,ｗｈｉｃｈｉｓｓｉｍｉｌａｒｔｏｂｉｏｌｏｇｉｃａｌｍｅｍｂｒａｎｅｆｏｒｍｅｄｂｙ…     

Simultaneous Determination of Ranitidine and Metronidazole at Glassy Carbon Electrode Modified with Single Wall Carbon Nanotubes

Single‐walled carbon nanotubes(SWCNTs) were dispersed into DMSO, and a SWCNTs‐film coated glassy carbon electrode was achieved via evaporating the solvent. The results indicated that CNT modified glassy carbon electrode exhibited efficiently electrocatalytic reduction for ranitidine and metronidazole with relatively high sensitivity, stability and life time. Under conditions of cyclic voltammetry, the potential for reduction of selected analytes is lowered by approximately 150 mV and current is enhanced significantly (7 times) in comparison to the bare glassy carbon electrode. The electrocatalytic behavior is further exploited as a sensitive detection scheme for these analytes determinations by hydrodynamic amperometry. Under optimized condition in amperometric method the concentration calibration range, detection limit and sensitivity were about, 0.1–200 μM, detection limit (S/N=3) 6.3×10^?8 mol L^?1 and sensitivity 40 nA/μM for metronidazole and 0.3–270 μM 7.73×10^?8 mol L^?1 and 25 nA/μM for ranitidine. In addition, the ability of the modified electrode for simultaneous determination of ranitidine and metronidazole was evaluated. The proposed method was successfully applied to ranitidine and metronidazole determination in tablets. The analytical performance of this sensor has been evaluated for detection of these analytes in serum as a real sample.     

Development of a nanocomposite system and its application in biosensors construction

The present work describes the development of a nanocomposite system and its application in construction of a new amperometric biosensor applied in the determination of total polyphenolic content from propolis extracts. The nanocomposite system was based on covalent immobilization of laccase on functionalized indium tin oxide nanoparticles and it was morphologically and structural characterized. The casting of the developed nanocomposite system on the surface of a screen-printed electrode was used for biosensor fabrication. The analytical performance characteristics of the settled biosensor were determined for rosmarinic acid, caffeic acid and catechol (as laccase specific substrate). The linearity was obtained in the range of 1.06×10^?6 ? 1.50×10^?5 mol L^?1 for rosmarinic acid, 1.90×10^?7 ? 2.80×10^?6 mol L^?1 for caffeic acid and 1.66×10^?6 ? 7.00×10^?6 mol L^?1 for catechol. A good sensitivity of amperometric biosensor 141.15 nA µmol^?1 L^?1 and fair detection limit 7.08×10^?8 mol L^?1 were obtained for caffeic acid. The results obtained for polyphenolic content of propolis extracts were compared with the chromatographic data obtained by liquid-chromatography with diode array detection.      

In Vivo Monitoring of the Thiols in Rat Striatum by Liquid Chromatography with Amperometric Detection at a Functionalized Multi‐Wall Carbon Nanotubes Modified Electrode

A new chemically modified electrode (CME) was fabricated, which was based on the immobilization of multi‐wall carbon nanotubes fuctionalized with carboxylic group (MWNT‐COOH). The results indicated that the CME exhibited efficiently electrocatalytic oxidation for L ‐cysteine and glutathione with relatively high sensitivity, stability and long‐life. Coupled with HPLC, the MWNT‐COOH CME was utilized for amperometric detection of the thiols. The peak currents of L ‐cysteine and glutathione were linear to their concentrations ranging from 3.0×10^?7 to 1.0×10^?3 mol/L with the calculated detection limit (S/N=3) of 1.2×10^?7, 2.2×10^?7 mol/L, respectively. The method had been successfully applied to assess the contents of L ‐cysteine and glutathione in rat striatal microdialysates.     

Sol—Gel Derived Carbon Ceramic Electrode Bulk—Modified with Tris（1,10—phenanthroline—5,6—dione） iron （Ⅱ）Hexafluorophosphate and Its Use as an Amperometric Iodate Sensor

A surface‐renewable tris(1, 10‐phenanthroline‐5, 6‐dione) iron (D) hexafluorophosphate (FePD) modified carbon ceramic electrode was constructed by dispersing FePD and graphite powder in methyltrimethoxysilane (MTMOS) based gels. The FePD‐modified electrode presented pH‐dependent voltammetric behavior, and its peak currents were diffusion‐controlled in 0.1 mol/L Na₂SO₄ + H₂SO₄ solution (pH = 0.4). In the presence of iodate, dear electrocatalytic reduction waves were observed and thus the chemically modified electrode was used as an amperometric sensor for iodate in common salt. The linear range, sensitivity, detection limit and response time of the iodate sensor were 5 × 10^?6–1 × 10^?2 mol/L, 7.448 μA·L/ mmol, 1.2 × 10^?6 mol/L and 5 s, respectively. A distinct advantage of this sensor is its good reproducibility of surface‐renewal by simple mechanical polishing.     

Simultaneous Determination of Iron and Copper in Ethanol Fuel Using Nafion/Carbon Nanotubes Electrode

This work presents the analytical method development for iron and copper determination in ethanol fuel. This method was developed using stripping voltammetry with a glassy carbon electrode modified with Nafion/Carbon‐nanotubes. With linear sweep stripping voltammetry was achieved a limit of detection of 7.1×10^?7 mol L^?1 for Fe³⁺ and 5.1×10^?8 mol L^?1 for Cu²⁺. The amperometric sensitivities were 2.0×10⁶ µA mol^?1 L for Fe³⁺ and 2.8×10⁷ µA mol^?1 L for Cu²⁺. The recovery study showed that the method has good accuracy and repeatability, with recovery of 108 and 103 % for Fe³⁺ and Cu²⁺ respectively.     

Simultaneous Determination of Levodopa and Its Metabolite in Human Blood by Capillary Electrophoresis with Laser‐induced Fluorescence Detection

A rapid, sensitive and reproducible method is described for the analysis of levodopa and its metabolite dopamine (DA) in human blood. The influence of carbidopa as the inhibitor againist the decarboxylase activity on the metabolism has been also studied. After derivatization in a dark pulsator for 12 h at room temperature, the fluorescein isothiocyanate (FITC) derivative of levodopa and other components were separated by capillary zone electrophoresis (CZE) within 13 min and detected with laser-induced fluorescence (LIF). Under the optimum analysis conditions, the linear range is 3.0×10^－8—4.0×10^－6 mol/L and 1.0×10^－8—2.0×10^－6 mol/L for levodopa and DA, respectively. The detection limits of levodopa and DA were 7.8×10^－9 mol/L (39.0 amol) and 3.1×10^－9 mol/L (15.5 amol), respectively. The method was successfully applied to monitoring the levodopa and DA in human blood after one took tablets orally.     

Catalysis‐Electrochemical Detection of Horseradish Peroxidase at Zeptomole Level in Capillary Zone Electrophoresis

Capillary zone electrophoresis with catalysis‐electrochemical detection has been developed and applied to determining horseradish peroxidase (HRP) at zeptomole levels. In this method, an on‐line enzyme catalysis reactor with a reaction capillary was designed. Isoenzymes of HRP were separated by capillary zone electrophoresis, and then they catalyzed the enzyme substrate 3,3′,5,5′‐tetramethylbenzide (TMB(Red)) and H₂O₂ in the reaction capillary. The reaction product, TMB(Ox), could be determined using amperometric detection on a carbon fiber microdisk bundle electrode at the outlet of the reaction capillary. Because of enzyme amplification, a significant amount of TMB(Ox) could be produced for detection. Therefore, the limit of detection (LOD) of HRP is very low. The optimum conditions of the method are 1.5×10^?2 mol/L borate (pH 7.4) for the run buffer, 2×10^?3 mol/L for the concentration of H₂O₂, 2×10^?4 mol/L TMB(Red)+2.0×10^?2 mol/L citrate‐phosphate (pH 5.0) for the substrate solution, 40 cm for the liquid pressure height, 20 kV for the separation voltage, 100 mV for the detection potential. HRP could be measured with a detection limit of 4.8×10^?12 mol/L or 47.5 zmol (S/N=3). The linear range is from 2.40×10^?11 to 2.40×10^?8 mol/L. Using this method, commercial HRP was measured at zeptomole within ten minutes.     

Graphene oxide coated capillary for the analysis of endocrine‐disrupting chemicals by open‐tubular capillary electrochromatography with amperometric detection

A graphene oxide‐coated capillary was fabricated by using 3‐aminopropyltriethoxysilane as the cross‐linking agent. It was used for the separation and detection of three endocrine‐disrupting chemicals, including bisphenol A, 4‐nonylphenol, and 4‐octylphenol by capillary electrochromatography. Due to the hydrophobicity, hydrogen bonding, and π–π interaction between graphene oxide and the analytes, the three analytes could be well separated in pH = 11.0, 20 mmol/L Na₂B₄O₇‐NaOH/methanol mobile phase (50:50, v/v) within 950 s. After preconcentration, the detection limits were 6.7 × 10^?10, 3.3 × 10^?9, and 6.7 × 10^?10 mol/L (S/N = 3) for bisphenol A, nonylphenol, and octylphenol, respectively. The developed method was successfully applied to the determination of the above analytes in water samples. The satisfactory result demonstrated that the graphene oxide coated capillary used in capillary electrochromatography with amperometric detection was convenient to prepare, highly stable, and had good reproducibility.     

Magnetite NPs@C with Highly‐Efficient Peroxidase‐Like Catalytic Activity as an Improved Biosensing Strategy for Selective Glucose Detection

This work reports the novel application of carbon‐coated magnetite nanoparticles (mNPs@C) as catalytic nanomaterial included in a composite electrode material (mNPs@C/CPE) taking advantages of their intrinsic peroxidase‐like activity. The nanostructured electrochemical transducer reveals an enhancement of the charge transfer for redox processes involving hydrogen peroxide. Likewise, mNPs@C/CPE demonstrated to be highly selective even at elevated concentrations of ascorbic acid and uric acid, the usual interferents of blood glucose analysis. Upon these remarkable results, the composite matrix was further modified by the addition of glucose oxidase as biocatalyst, in order to obtain a biosensing strategy (GOx/mNPs@C/CPE) with enhanced properties for the electrochemical detection of glucose. GOx/mNPs@C/CPE exhibit a linear range up to 7.5×10^?3 mol L^?1 glucose, comprising the entirely physiological range and incipient pathological values. The average sensitivity obtained at ?0.100 V was (1.62±0.05)×10⁵ nA L mol^?1 (R²=0.9992), the detection limit was 2.0×10^?6 M while the quantification limit was 6.1×10^?6 mol L^?1. The nanostructured biosensor demonstrated to have an excellent performance for glucose detection in human blood serum even for pathological values.     

Determination of L‐Vesamicol in Serum Samples Using Enantioselective,Potentiometric Membrane Electrodes Based on Antibiotics

Abstract

Enantioselective, potentiometric membrane electrodes (EPMEs) based on antibiotics are proposed for the enantioanalysis of L‐vesamicol. A carbon paste was modified with antibiotics (vancomycin, teicoplanin, and teicoplanin modified with acetonitrile), as chiral selectors. The EPMEs based on antibiotics were reliably used for enantiopurity tests of L‐vesamicol using the direct potentiometric technique. The following linear concentration ranges: 1.0×10^?6–1.0×10^?4, 1.0×10^?6–1×10^?3 and 1×10^?7?1×10^?2 mol/L; and detection limits: 1.1×10^?7, 9.6×10^?8, and 3.6×10^?8 mol/L were determine for vancomycin, teicoplanin, and teicoplanin modified with acetonitrile–based EPMEs, respectively. The proposed EPMEs were applied for the enantioanalysis of L‐vesamicol in urine samples.     

A Selective Cholesterol Biosensor Based on Composite Film Modified Electrode for Amperometric Detection

An amperometric cholesterol biosensor based on immobilization of cholesterol oxidase in a Prussian blue (PB)/polypyrrole (PPy) composite film on the surface of a glassy carbon electrode was fabricated. Hydrogen peroxide produced by the enzymatic reaction was catalytically reduced on the PB film electrode at 0 V with a sensitivity of 39 μA (mol/L)^?1. Cholesterol in the concentration range of 10^?5 ? 10^?4 mol/L was determined with a detection limit of 6 × 10^?7 mol/L by amperometric method. Normal coexisting compounds in the bio‐samples such as ascorbic acid and uric acid do not interfere with the determination. The excellent properties of the sensor in sensitivity and selectivity are attributed to the PB/PPy layer modified on the sensor.     

Determination of Butylated Hydroxyanisole by Briggs‐Rauscher Oscillating Reaction Catalyzed by a Macrocyclic Nickel (II) Complex

A novel analytical approach for quantitative measurement of butylated hydroxyanisole (BHA) is dis‐ cussed in this paper. Such a method depends on the inhibitory effect of BHA on a Briggs‐Rauscher (B‐R) oscillating reaction. Unlike the classical B‐R system which involves Mn²⁺ as the catalyst, such a B‐R sys‐ tem is catalyzed by a macrocyclic nickel (II) complex [NiL](ClO₄)₂, where L in the complex is an unsatu‐ rated ligand 5,7,7,12,14,14‐hexemethyl‐1,4,8,11‐tetraazacyclotetradeca‐4,11‐diene. By perturbation of BHA on the system, the oscillation was inhibited in the presence trace amounts of BHA and the inhibition time was found to be proportional to the concentration of BHA over the range 1.00×10^?7–1.20×10^?4 mol/L. Two calibration curves were obtained: the first linear regression is over the range of 1.00×10^?7–2.00×10^?6 mol/L, and the second linear regression is over the range between 2.00×10^?6 and 1.20×10^?4 mol/L, with a lowest limit of detection of 4.00×10^?8 mol/L. UV spectra measurements were employed to clarify the possible perturbation mechanism caused by BHA on the B‐R oscillating reaction.     

Study on Diffusion Mechanisms and Determination of Dihydroxybenzene Isomers at the Pre‐anodized Inlaying Ultrathin Carbon Paste Electrode

In this paper, nichrome was adopted as a substrate, to fabricate the pre‐anodized inlaying ultrathin carbon paste electrode (PAIUCPE). The electrochemical behaviors and diffusion mechanisms of three dihydroxybenzene isomers at the electrode were carefully investigated. The effect of pH on oxidation peak current was also detailedly explained. The results were shown that oxidation peak current not only related to the reaction of electroactive materials at the working electrode, but also depended on the reaction variable of reduction at the auxiliary electrode. The oxidation peaks of hydroquinone (HQ), catechol (CC) and resorcinol (RC) located at 0.181 V, 0.288 V and 0.736 V. For CC, RC and HQ, the oxidation peak currents were linear to the concentrations at the range of 5.0 × 10^?6～5.0 × 10^?4 mol/L, 3.0 × 10^?6～5.0 × 10^?4 mol/L and 4.0 × 10^?6～4.0 × 10^?4 mol/L with the detection limits of 2.0 × 10^?7 mol/L, 1.2 × 10^?7 mol/L and 1.2 × 10^?7 mol/L, respectively. The proposed method was successfully applied in the simultaneous determination of dihydroxybenzene isomers in artificial sewage samples with satisfactory results.     

Determination of Albumin Using the Chemiluminescence of Tb3+/K2S2O8 System

A new chemiluminescence system of Tb³⁺/K₂S₂O₈ was developed for the determination of albumin. Some experimental conditions were examined and optimized. The linear ranges of the calibration curves are 5.0 × 10^?9–5.0 × 10^?6 mol/L for bovine serum albumin, 5.0 × 10^?8–1.0 × 10^?5 mol/L for human serum albumin and 2.5 × 10^?7–1.0 × 10^?5 mol/L for ovalbumin, and the corresponding detection limits are 1.9 × 10^?9 mol/L, 1.5 × 10^?8 mol/L, and 1.5 × 10^?7 mol/L, respectively. The method was applied to the determination of albumin in human serum samples, and the results were in agreement with those obtained by the bromcresol green method. The relative errors for the analytical results were from ?2.0% to 4.3%.     

Determination of Sulfide by Hematoxylin Multiwalled Carbon Nanotubes Modified Carbon Paste Electrode

This study investigates a new approach for the amperometric determination of sulfide using a hematoxylin multiwalled carbon nanotubes modified carbon paste electrode (HM‐MWCNTs/CPE). The experimental results show that HM‐MWCNTs/CPE significantly enhances the electrocatalytic activity towards sulfide oxidation. Cyclic voltammetric studies show that the peak potential of sulfide shifted from +400 mV at unmodified CPE to +175 mV at HM‐MWCNTs/CPE. The currents obtained from amperometric measurements at optimum conditions were linearly correlated with the concentration of sulfide. The calibration curve was obtained for sulfide concentrations in the range of 0.5–150×10^?6 mol L^?1. The detection limit was found to be 0.2×10^?6 mol L^?1 for the amperometric method. The proposed method was successfully applied to a river water sample in Pardubice, Czech Republic.     

Determination of Ethambutol in Aqueous Medium Using an Inexpensive Gold Microelectrode Array as Amperometric Sensor

In this paper, gold microelectrode array (Au‐MEA) were employed to determination of ethambutol in aqueous medium. Au‐MEA was constructed with an electronic microchip integrated circuit. The standard curve (analytical curve) was constructed for a single microelectrode (ME) in a concentration range of 5.0×10^?5 to 2.0×10^?3 mol L^?1, allowing estimation of both the limit of detection (LOD) (4.73×10^?5 mol L^?1) and the limit of quantification (LOQ) (1.57×10^?4 mol L^?1) for ethambutol. When the MEA was utilized, the LOD and LOQ were 1.55×10^?7 and 5.18×10^?7 mol L^?1, respectively. Our results indicated that Au‐MEA can be utilized as amperometric sensors for ethambutol determination in aqueous media.     

Determination of enoxacin and ofloxacin by capillary electrophoresis with electrochemiluminescence detection in biofluids and drugs and its application to pharmacokinetics

A novel and sensitive method for the simultaneous determination of enoxacin and ofloxacin has been established using capillary electrophoresis (CE) coupled with electrochemiluminescence (ECL) detection based on the ECL enhancement of tri(2,2‐bipyridyl)ruthenium(II). The conditions for sample solvent type, CE separation and ECL detection were investigated systematically. The analytes were well separated and detected within 7 min. The limits of detection (S/N = 3) of enoxacin and ofloxacin are 9.0 × 10^?9 and 1.6 × 10^?8 mol/L, respectively. The precisions (RSD%) of intraday and interday are less than 2.1 and 4.0%, respectively. The limits of quantitation (S/N = 10) of enoxacin and ofloxacin are 3.2 × 10^?7 and 5.4 × 10^?7 mol/L in human urine samples and 4.1 × 10^?7 and 6.9 × 10^?7 mol/L in human serum samples, respectively. The recoveries of enoxacin and ofloxacin at different concentration levels in human urine, serum and eye drop samples are between 94.0 and 106.7%. The proposed method was successfully applied to the determination of the enoxacin and ofloxacin in human urine, serum and eye drop samples and the monitoring of pharmacokinetics of ofloxacin in human body. Copyright © 2009 John Wiley & Sons, Ltd.     

Amperometric Sensor for Hydroxylamine Based on Hybrid Nickel‐Cobalt Hexacyanoferrate Modified Electrode

Hybrid nickel‐cobalt hexacyanoferrate (NiCoHCF) particles were immobilized onto a glassy carbon electrode by cyclic voltammetry. Characterization of these particles by Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, X‐ray diffraction and electrochemistry revealed that NiCoHCF was a substitution‐type hybrid hexacyanoferrate rather than a simple mixture system. As an important reducing agent, hydroxylamine could be electrocatalytically oxidized at the NiCoHCF modified electrode. The effects of the solution pH and the applied potential on the amperometric response of hydroxylamine were examined. Under optimum conditions, the catalytic peak current was proportional to the concentration of hydroxylamine in the range 2.0×10^?5–1.0×10^?2 mol/L with a detection limit of 2.3×10^?7 mol/L. Furthermore, detection results obtained with this sensor showed high sensitivity, fast response time, good stability and anti‐interference ability.