Highly selective separation and detection of cyromazine from seawater using graphene oxide based molecularly imprinted solid‐phase extraction

A novel molecularly imprinted polymer based on graphene oxide was prepared as a solid‐phase extraction adsorbent for the selective adsorption and extraction of cyromazine from seawater samples. The obtained graphene oxide molecularly imprinted polymer and non‐imprinted polymer were nanoparticles and characterized by scanning electron microscopy. The imprinted polymer showed higher adsorption capacity and better selectivity than non‐imprinted polymer, and the maximum adsorption capacity was 14.5 mg/g. The optimal washing and elution solvents for molecularly imprinted solid phase extraction procedure were 2 mL of acetonitrile/water (80:20, v/v) and methanol/acetic acid (70:30, v/v), respectively. The recoveries of cyromazine in the spiked seawater samples were in the range of 90.3–104.1%, and the relative standard deviation was <5% (n = 3) under the optimal procedure and detection conditions. The limit of detection of the proposed method was 0.7 μg/L, and the limit of quantitation was 2.3 μg/L. Moreover, the imprinted polymer could keep high adsorption capacity for cyromazine after being reused six times at least. Finally, the synthesized graphene oxide molecularly imprinted polymer was successfully used as a satisfied sorbent for high selectivity separation and detection of cyromazine from seawater coupled with high‐performance liquid chromatography.     

Exploration of a ternary deep eutectic solvent of methyltriphenylphosphonium bromide/chalcone/formic acid for the selective recognition of rutin and quercetin in Herba Artemisiae Scopariae

Methyltriphenylphosphonium bromide/chalcone/formic acid, a green ternary deep eutectic solvent, was applied as a functional monomer and dummy template simultaneously in the synthesis of a new molecularly imprinted polymer. Ternary deep eutectic solvent based molecularly imprinted polymers are used as a solid‐phase extraction sorbent in the separation and purification of rutin and quercetin from Herba Artemisiae Scopariae combined with high‐performance liquid chromatography. Fourier transform infrared spectroscopy and field‐emission scanning electron microscopy were applied to characterize the deep eutectic solvent based molecularly imprinted polymers synthesized using different molar ratios of chalcone. The static and competitive adsorption tests were performed to examine the recognition ability of the molecularly imprinted polymers to rutin and quercetin. The ternary deep eutectic solvent consisting of formic acid/chalcone/methyltriphenylphosphonium bromide (1:0.05:0.5) had the best molecular recognition effect. After optimization of the washing solvents (methanol/water, 1:9) and eluting solvents (acetonitrile/acetic acid, 9:1), a reliable analytical method was developed for strong recognition towards rutin and quercetin in Herba Artemisiae Scopariae with satisfactory extraction recoveries (rutin: 92.48%, quercetin: 94.23%). Overall, the chalcone ternary deep eutectic solvent‐based molecularly imprinted polymer coupled with solid‐phase extraction is an effective method for the selective purification of multiple bioactive compounds in complex samples.     

Molecularly imprinted solid-phase extraction for the selective determination of bromhexine in human serum and urine with high performance liquid chromatography

In this work, a novel method is described for the determination of bromhexine in biological fluids using molecularly imprinted solid-phase extraction as the sample cleanup technique combined with high performance liquid chromatography (HPLC). The water-compatible molecularly imprinted polymers (MIPs) were prepared using methacrylic acid as functional monomer, ethylene glycol dimethacrylate as cross-linker, chloroform as porogen and bromhexine as the template molecule. The novel imprinted polymer was used as a solid-phase extraction sorbent for the extraction of bromhexine from human serum and urine. Various parameters affecting the extraction efficiency of the polymer have been evaluated. The optimal conditions for molecularly imprinted solid-phase extraction (MISPE) consisted of conditioning 1 mL methanol and 1 mL of deionized water at neutral pH, loading of 5 mL of the water sample (25 μg L⁻¹) at pH 6.0, washing using 2 mL acetonitrile/acetone (1/4, v/v) and elution with 3× 1 mL methanol/acetic acid (10/1, v/v). The MIP selectivity was evaluated by checking several substances with similar molecular structures to that of bromhexine. Results from the HPLC analyses showed that the calibration curve of bromhexine using MIP from human serum and urine is linear in the ranges of 0.5-100 and 1.5-100 μg L⁻¹ with good precisions (3.3% and 2.8% for 5.0 μg L⁻¹), respectively. The recoveries for serum and urine samples were higher than 92%.     

Nanogram/mL detection of nortriptyline: Preparation of a molecularly imprinted polymer for spectrophotometric determination of nortriptyline based on multivariate optimization methods

In this work, the molecularly imprinted polymer was used as a selective sorbent in solid‐phase extraction method for the spectrophotometric determination of nortriptyline at 239 nm. Molecularly imprinted polymer was synthesized by pyrrole as a functional monomer in the presence of nortriptyline as a template. Several factors, consist of the concentration of the monomer to template ratio, amount of initiator, stirring rate, reaction time, the pH of the buffer solution, amount of sorbent, loading time, shaking rate of loading, extraction time, and shaking rate of extraction were evaluated due to their effectiveness in the preparation and extraction capability of molecularly imprinted polymer. Multivariate optimization methods, such as Plackett‐Burman and central composite designs, were employed to find and optimize the significant factors. Under the selected optimal conditions, molecularly imprinted polymer showed a linear range from 0.1 to 100 µmol/L (0.026 to 26 µg/mL) nortriptyline, a detection limit of 10.3 nmol/L (2.7 ng/mL), a highly repeatable (relative standard deviation of 3.7%) and reproducible response (relative standard deviation of 4.6%), and a good selectivity in the presence of structurally related molecules. Furthermore, molecularly imprinted polymer showed high extraction efficiency and was successfully used for the determination of nortriptyline in real samples.     

Novel molecularly imprinted magnetic nanoparticles for the selective extraction of protoberberine alkaloids in herbs and rat plasma

In this work, a novel magnetic nanomaterial functionalized with a molecularly imprinted polymer was prepared for the extraction of protoberberine alkaloids. Molecularly imprinted polymers were made on the surface of Fe₃O₄ nanoparticles by using berberine as template, acetonitrile/water as porogen, acrylamide as functional monomer and ethylene glycol dimethacrylate as cross‐linker. The optimized molar ratio of template/functional monomer was 1:7. The polymeric magnetic nanoparticles were characterized by transmission electron microscopy and Fourier transform infrared spectroscopy. The stability and adsorption capacity of the molecularly imprinted polymers were investigated. The molecularly imprinted polymers were used as a selective sorbent for the magnetic molecularly imprinted solid‐phase extraction and determination of jatrorrhizine, palmatine, and berberine. Extraction parameters were studied including loading pH, sample volume, stirring speed, and extraction time. Finally, a magnetic molecularly imprinted solid‐phase extraction coupled to high‐performance liquid chromatography method was developed. Under the optimized conditions, the method showed good linear range of 0.1–150 ng/mL for berberine and 0.1–100 ng/mL for jatrorrhizine and palmatine. The limit of detection was 0.01 ng/mL for berberine and 0.02 ng/mL for jatrorrhizine and palmatine. The proposed method has been applied to determine protoberberine alkaloids in Cortex phellodendri and rat plasma samples. The recoveries ranged from 87.33–102.43%, with relative standard deviation less than 4.54% in Cortex phellodendri and from 102.22–111.15% with relative standard deviation less than 4.59% in plasma.     

A new ionic liquid surface‐imprinted polymer for selective solid‐phase‐extraction and determination of sulfonamides in environmental samples

Toward improving the selective adsorption performance of molecularly imprinted polymers in strong polar solvents, in this work, a new ionic liquid functional monomer, 1‐butyl‐3‐vinylimidazolium bromide, was used to synthesize sulfamethoxazole imprinted polymer in methanol. The resulting molecularly imprinted polymer was characterized by Fourier transform infrared spectra and scanning electron microscopy, and the rebinding mechanism of the molecularly imprinted polymer for sulfonamides was studied. A static equilibrium experiment revealed that the as‐obtained molecularly imprinted polymer had higher molecular recognition for sulfonamides (e.g., sulfamethoxazole, sulfamonomethoxine, and sulfadiazine) in methanol; however, its adsorption of interferent (e.g., diphenylamine, metronidazole, 2,4‐dichlorophenol, and m‐dihydroxybenzene) was quite low. ¹H NMR spectroscopy indicated that the excellent recognition performance of the imprinted polymer was based primarily on hydrogen bond, electrostatic and π‐π interactions. Furthermore, the molecularly imprinted polymer can be employed as a solid phase extraction sorbent to effectively extract sulfamethoxazole from a mixed solution. Combined with high‐performance liquid chromatography analysis, a valid molecularly imprinted polymer‐solid phase extraction protocol was established for extraction and detection of trace sulfamethoxazole in spiked soil and sediment samples, and with a recovery that ranged from 93–107%, and a relative standard deviation of lower than 9.7%.     

Computer‐assisted design and synthesis of molecularly imprinted polymers for the simultaneous determination of six carbamate pesticides from environmental water

The computer‐assisted design and synthesis of molecularly imprinted polymers for the simultaneous capture of six carbamate pesticides from environmental water are reported in this work. The quantum mechanical computational approach was employed to design the molecularly imprinted polymers with carbofuran as template. The interaction energies between the template molecule and different functional monomers in various solvents were calculated to assist in the selection of the functional monomer and porogen. The optimised molecularly imprinted polymer was subsequently used as a class‐selective sorbent in solid‐phase extraction for pre‐concentration and determination of carbamates from environmental water. The parameters influencing the extraction efficiency of the molecularly imprinted solid‐phase extraction procedure were systematically investigated to facilitate the class‐selective extraction. For the proposed method, linearity was observed over the range of 2–500 ng/mL with the correlation coefficient ranging from 0.9760 to 1.000. The limits of detection ranged from 0.2 to 1.2 ng/mL, and the limit of quantification was 4 ng/mL. These results confirm that computer‐assisted design is an effective evaluation tool for molecularly imprinted polymers synthesis, and that molecularly imprinted solid‐phase extraction can be applied to the simultaneous analysis of carbamates in environmental water.     

Isolation of aristolochic acid I from herbal plant using molecular imprinted polymer composited ionic liquid‐based zeolitic imidazolate framework‐67

Aristolochic acid I is a toxic compound found in the genus of Aristolochia plants, which are commonly used as herbal cough treatment medicines. To remove the aristolochic acid I in extract efficiently and selectively, a molecularly imprinted polymer composed of ethylimidazole ionic liquid‐based zeolitic imidazolate framework‐67 was synthesized and used as the adsorbent. Under the conditions optimized by the software design expert, the sorbent showed highest adsorption amount of 34.25 mg/g in methanol/water (95:5, v/v) at 39°C for 138 min. The sorbent was then applied to solid phase extraction to isolate aristolochic acid I from the extract of the herbal plant Fibraurea Recisa Pierre. 0.043 mg/g of aristolochic acid I was obtained after the loading, washing, and elution processes. The limit of detection of 2.41 × 10^?5 mg/mL and good recoveries provided evidence for the accuracy of this method.     

Preparation of magnetic molecularly imprinted polymer for dispersive solid‐phase extraction of valsartan and its determination by high‐performance liquid chromatography: Box‐Behnken design

In this work, core/shell magnetic molecularly imprinted polymer nanoparticles were synthesized for extraction and pre‐concentration of valsartan from different samples and then it was measured with high‐performance liquid chromatography. For preparation of molecularly imprinted polymer nanoparticles, Fe₃O₄ nanoparticles were coated with tetraethyl orthosilicate and then functionalized with 3‐(trimethoxysilyl) propyl methacrylate. In the next step, molecularly imprinted polymer nanoparticles were synthesized under reflux and distillation conditions via polymerization of methacrylic acid, valsartan (as a template), azobisisobutyronitrile and ethylene glycol dimethacrylate as cross linking. The properties of molecularly imprinted polymer nanoparticle were investigated by FTIR spectroscopy, field emission scanning electron microscopy, and X‐ray diffraction. Box‐Behnken design with the aid of desirability function was used for optimizing the effect of variables such as the amounts of molecularly imprinted polymer nanoparticles, time of sonication, pH, and volume of methanol on the extraction percentage of valsartan. According to the obtained results, the affecting variables extraction condition were set as 10 mg of adsorbent, 16 min for sonication, pH = 5.5 and 0.6 mL methanol. The obtained linear response (r² > 0.995) was in the range of 0.005–10 µg/mL with detection limit 0.0012 µg/mLand extraction recovery was in the range of 92–95% with standard deviation less than 6% (n = 3).     

Extraction of Anthraquinones from Rhubarb by a Molecularly Imprinted–Matrix Solid-Phase Dispersion Method with HPLC Detection

A simple method based on matrix solid-phase dispersion for selective extraction of anthraquinones from rhubarb samples was developed using a molecularly imprinted polymer as sorbent. The molecularly imprinted polymer was prepared using emodin as the template molecule, methacrylic acid as the functional monomer, and ethylene glycol dimethacrylate as the cross-linking agent. The polymer was characterized by scanning electron microscopy and Fourier-transform infrared spectrometry. Isothermal adsorption and dynamic adsorption experiments were performed. The best extraction conditions for anthraquinones were obtained at a ratio of molecularly imprinted polymer to sample of 1:1, a dispersion time of 5 minutes, with 5% aqueous methanol as the washing solvent, and an elution solvent of methanol-acetic acid (99:1, v/v). Once the matrix solid-phase dispersion process was optimized, the extract was reacted with 8% hydrochloric acid for hydrolysis. The anthraquinones extracted from rhubarb were determined by liquid chromatography. The detection limits of chrysophanol, emodin, physcion, and aloe-emodin were 0.23, 0.24, 0.28, and 0.27 µg mL^?1, respectively. The proposed method was compared with the method in Chinese pharmacopoeia, and the results show that the extraction yield of anthraquinones obtained by molecularly imprinted polymer–matrix solid-phase dispersion method was higher. Moreover, the proposed method is faster and simpler and can achieve extraction and purification in the same system.     

Synthesis of molecular imprinted polymer nanoparticles followed by application of response surface methodology for optimization of metribuzin extraction from urine samples

A molecular imprinted polymer was prepared with precipitation polymerization technique and applied as a sorbent for selective extraction and enrichment of metribuzin herbicide prior to high performance liquid chromatography. Optimization of critical variables affecting the efficiency of molecularly imprinted solid-phase extraction (MISPE), such as sorbent mass, sample pH and flow rate of sample, volume, concentration, and flow rate of elution solvent was done by employing central composite design (CCD) of the response surface methodology. Two separate models were developed for the adsorption and recycling steps. The analysis of variance (ANOVA) demonstrated that, experimental data were excellently fitted to the proposed response models. The optimum operating conditions were: a sorbent mass of 25 mg, sample pH 6.19, sample flow rate of 2.15 mL/min, and a 5 mL portion of methanol/acetic acid with 92.7:7.3 (v/v) ratio and flow rate of 2.1 mL/min for the extraction process. Under the optimized conditions, the linear range was obtained from 20 to 120 µg/L (R²?=?0.999) and the lowest detectable concentration (LOD) and the lowest quantitative concentration (LOQ) were calculated as 5.75 and 19.86 µg/L, respectively. Finally, the designed MISPE method was successfully applied to determine trace amount of metribuzin in real samples. The diluted urine samples were spiked with metribuzin at 4 levels and extracted with recoveries ranging from 93.82 to 97.84% and the relative standard deviation (RSD) less than 4.8%.     

利用分子印迹技术预处理生物样品中头孢药物的研究

优化了头孢硫脒分子印迹聚合物的合成条件,探讨了分子印迹技术和固相萃取联用对血浆中头孢硫脒的分离富集,发现用4-乙烯基吡啶作功能单体合成的分子印迹聚合物作为固相萃取填充料,能定量吸附血浆中的头孢硫脒,并初步研究了其吸附机理。     

Preparation and application of molecularly imprinted polymer solid‐phase microextraction fiber for the selective analysis of auxins in tobacco

As signal molecules, auxins play an important role in mediating plant growth. Due to serious interfering substances in plants, it is difficult to accurately detect auxins with traditional solid‐phase extraction methods. To improve the selectivity of sample pretreatment, a novel molecularly imprinted polymer ‐coated solid‐phase microextraction fiber, which could be coupled directly to high‐performance liquid chromatography, was prepared with indole acetic acid as template molecule for the selective extraction of auxins. The factors influencing the polymer formation, such as polymerization solvent, cross‐linker, and polymerization time, were investigated in detail to enhance the performance of indole acetic acid‐molecularly imprinted polymer coating. The morphological and chemical stability of this molecularly imprinted polymer‐coated fiber was characterized by scanning electron microscopy, infrared spectrometry, and thermal analysis. The extraction capacity of the molecularly imprinted polymer‐coated solid‐phase microextraction fiber was evaluated for the selective extraction of indole acetic acid and indole‐3‐pyruvic acid followed by high‐performance liquid chromatography analysis. The linear range for indole acetic acid and indole‐3‐pyruvic acid was 1–100 µg/L and their detection limit was 0.5 µg/L. The method was applied to the simultaneous determination of two auxins in two kinds of tobacco (Nicotiana tabacum L and Nicotiana rustica L) samples, with recoveries range from 82.1 to 120.6%.     

Preparation and utilization of a molecularly imprinted polymer for solid phase extraction of tramadol

In this paper, a highly selective molecularly imprinted polymer (MIP) for tramadol hydrochloride, a drug used to treat moderate to severe pain, was prepared and its use as solid-phase extraction (SPE) sorbent was demonstrated. The molecularly imprinted solid-phase extraction procedure followed by high performance liquid chromatography with ultraviolet detector (MISPE-HPLC) was developed for selective extraction and determination of tramadol in human plasma and urine. The optimal conditions for molecularly imprinted solid-phase extraction (MISPE) consisted of conditioning with 1 mL methanol and 1 mL of deionized water at neutral pH, loading of tramadol sample (50 μg L⁻¹) at pH 7.5, washing using 1 mL acetone and elution with 3 × 1 mL of 10% (v/v) acetic acid in methanol. The MIP selectivity was evaluated by checking several substances with similar molecular structures to that of tramadol. Results from the HPLC analyses showed that the calibration curve of tramadol (using MIP from human plasma and urine) is linear in the ranges of 6–100 and 3–120 μg L⁻¹ with good precisions (1.9% and 2.9% for 5.0 μg L⁻¹), respectively. The recoveries for plasma and urine samples were higher than 81%.      

Magnetic molecularly imprinted composite for the selective solid‐phase extraction of p‐aminosalicylic acid followed by high‐performance liquid chromatography with ultraviolet detection

A new method for the selective extraction of p‐aminosalicylic acid from aqueous and urine samples has been developed using magnetic molecularly imprinted polymer nanoparticles before determination by high‐performance liquid chromatography. The Fe₃O₄ nanoparticles were first prepared through the chemical coprecipitation of Fe²⁺ and Fe³⁺ and then coated with a vinyl shell. Subsequently, a layer of molecularly imprinted polymers was grafted onto the vinyl‐modified magnetic nanoparticles by precipitation polymerization. FTIR spectroscopy, scanning electron microscopy, vibrating sample magnetometry, and thermogravimetric analysis were applied to characterize the sorbent properties. Moreover, the predominant parameters affecting the magnetic solid phase extraction such as sample pH, sorption and elution times, the amount of sorbent, and composition and volume of eluent were investigated thoroughly. The maximum sorption capacity of the imprinted polymer toward p‐aminosalicylic acid was 70.9 mg/g, which is 4.5 times higher than that of the magnetic nonimprinted polymer. The magnetic molecularly imprinted polymer nanoparticles were applied for the selective extraction of p‐aminosalicylic acid from aqueous and urine samples and satisfactory results were achieved. The results illustrate that magnetic molecularly imprinted polymer nanoparticles have a great potential in the extraction of p‐aminosalicylic acid from environmental and biological matrices.     

邻苯二甲酸二（2-丙基庚）酯分子印迹固相萃取剂的制备及其应用

以邻苯二甲酸二辛酯（DOP）为虚拟模板分子,α-甲基丙烯酸（MAA）为功能单体,乙二醇二甲基丙烯酸酯（EDMA）为交联剂,采用沉淀聚合法制备了对邻苯二甲酸二（2-丙基庚）酯（DPHP）具有高选择性的分子印迹聚合物（MIP）。用紫外分光光度法探索了不同功能单体与模板分子的结合能力,与功能单体丙烯酸（AA）相比,MAA与DOP的结合能力更强,其最佳结合的物质的量比为6：1。考察MIP对DOP、DPHP、邻苯二甲酸二甲酯（DMP）、邻苯二甲酸二丁酯（DBP）的选择吸附性能,发现该聚合物对DPHP具有更高的选择吸附性。以制备的聚合物为固相萃取填料,结合HPLC分析,考察了淋洗剂与洗脱剂的种类和用量对DPHP回收率的影响。将DPHP甲醇溶液加载至萃取柱后用1 mL甲醇-水（1：9,v/v）淋洗,5 mL甲醇-乙酸（9：1,v/v）洗脱,DPHP在分子印迹固相萃取（MISPE）柱上的回收率达到96.8%,而在非印迹固相萃取（NISPE）柱上的回收率仅为52.9%。将建立的MISPE-HPLC方法应用于测定兔口服DPHP后不同时间点兔血清中DPHP的浓度,发现其血药浓度的最大值为5.88 μg/mL,达峰值时间为4 h,DPHP加标回收率为90.0%~92.0%,相对标准偏差小于5%。     

Molecularly imprinted solid-phase extraction coupled with HPLC for the selective determination of monobutyl phthalate in bottled water

A molecularly imprinted polymer (MIP) was prepared using monobutyl phthalate as template. The synthesis was optimized by using different porogens and functional monomers. The MIP was used as a selective sorbent in molecularly imprinted solid-phase extraction (MIP-SPE) for pre-concentration and determination of monobutyl phthalate (mBP) from the bottled water. The difference in recognition selectivity of the polymer columns was observed in HPLC system, and the effect of the mobile phase on the performance of MIP columns was also investigated. Control of the MIP-SPE process is seen as important in helping to facilitate the selective extraction of mBP from water samples. Thereafter, the choice of washing solvent, eluting solvent amount, pH of loading sample, flow rate of loading solution and the loading sample volume was presented. The optimized procedure was described as follows: 25 mL spiked aqueous solution was percolated through the MIP-SPE cartridge at the flow rate of 1.5 mL/min. After rinsing with acetonitrile/methanol mixture (1:1, v/v), the bound analyte was desorbed with 3 mL methanol. The developed MIP-SPE method was demonstrated to be applicable for the analysis of mBP in the bottled water.     

Determination of domoic acid in shellfish extracted by molecularly imprinted polymers

A selective sample cleanup method using molecularly imprinted polymers was developed for the separation of domoic acid (a shellfish toxin) from shellfish samples. The molecularly imprinted polymers for domoic acid was prepared by emulsion polymerization using 1,3,5‐pentanetricarboxylic acid as the template molecule, 4‐vinyl pyridine as the functional monomer, ethylene glycol dimethacrylate as the crosslinker, and Span80/Tween‐80 (1:1 v/v) as the composite emulsifiers. The molecularly imprinted polymer showed high affinity to domoic acid with a dissociation constant of 13.5 μg/mL and apparent maximum adsorption capacity of 1249 μg/g. They were used as a selective sorbent for the detection of domoic acid from seafood samples coupled with high‐performance liquid chromatography. The detection limit of 0.17 μg/g was lower than the maximum level permitted by several authorities. The mean recoveries of domoic acid from clam samples were 93.0–98.7%. It was demonstrated that the proposed method could be applied to the determination of domoic acid from shellfish samples.     

Development of molecularly imprinted microspheres for the fast uptake of 4‐cumylphenol from water and soil samples

Molecularly imprinted microspheres containing binding sites for the extraction of 4‐cumylphenol have been prepared for the first time. The imprinted microspheres were synthesized by a precipitation method using 4‐cumylphenol as a template molecule, methacrylic acid as a functional monomer and divinylbenzene‐80 as a cross‐linker for polymer network formation. The formation and the morphology of molecularly imprinted microspheres were well characterized using infrared spectroscopy, thermogravimetric studies, and scanning electron microscopy. The Brunauer–Emmett–Teller analysis revealed the high surface area of the sorbent indicating formation of molecularly imprinted microspheres. The developed microspheres were employed as a sorbent for the solid‐phase extraction of 4‐cumylphenol and showed fast uptake kinetics. The sorption parameters were optimized to achieve efficient sorption of the template molecule, like pH, quantity of molecularly imprinted microspheres, time required for equilibrium set‐up, sorption kinetics, and adsorption isotherm. A standard method was developed to analyze the sorbed sample quantitatively at 279 nm using high‐performance liquid chromatography with diode array detection. It was validated by determining target analyte from synthetic samples, bottled water, spiked tap water, and soil samples. The prepared material is a selective and robust sorbent with good reusability.     

Water‐compatible halloysite‐imprinted polymer by Pickering emulsion polymerization for the selective recognition of herbicides

A water‐compatible molecularly imprinted polymer was prepared by Pickering emulsion polymerization using halloysite nanotubes as stabilized solid particles. During polymerization, we used 4‐vinylpyridine as monomer, divinylbenzene as cross‐linking agent, toluene as porogen, 2,2‐azobisisobutyronitrile as initiator, 2,4‐dichlorophenoxyacetic acid as template to form the oil phase, and Triton X‐100 aqueous solution to form the water phase. The halloysite nanotubes molecularly imprinted polymer was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. Kinetic and equilibrium bindings were also employed to evaluate the adsorption properties of the imprinted polymer. The imprinted polymer showed better selectivity, more rapid kinetic binding (60 min) for 2,4‐dichlorophenoxyacetic acid in pure water compared with rebinding in toluene. The imprinted polymer was used as a sorbent to enrich and separate 2,4‐dichlorophenoxyacetic acid from water, and was detected by high‐performance liquid chromatography with UV detection.