Oxidation of CO and hydrocarbons over perovskite-type complex oxides

The catalytic activity of perovskites M^IM^IIO₃ (M^I=La; M^II=Co, Mn, Cr, Al, Ni, and V) and M^ICoO₃ (M=Y, Nd, Sm, and Er) in the oxidation of CO, propylene, and ethylbenzene was investigated. The highest activity was observed for the M^ICoO₃ catalysts with perfect perovskite structure. The nature of the rare-earth element has no influence on the catalytic activity. Deformation of the octahedral coordination of the metal was found for the less active catalysts. The interaction of gases (CO, CO+air) with the catalyst surface was investigated. The more active catalysts adsorb a greater amount of O₂, and the adsorption occurs in the temperature region of the oxidation reaction. The activities of the perovskite- and spinel-type catalysts were compared under similar conditions. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 698–701, April, 1999.     

Exoemission and catalytic activity of oxides with perovskite and spinel structures in the oxidation of CO and hydrocarbons

Low-temperature (20—400 °C) exoemission of negative charges from mixed oxides having the perovskite structure M¹M²O₃ (M¹ = La; M² = Co, Mn, Ni) or the spinel structure M¹M² ₂O₄ (M¹ = Cu; M² = Fe, Co, Cr) was studied. The relationship between the catalytic activity in CO, ethylbenzene, and propylene oxidation and the emissivity of the oxides was elucidated. The role of weakly bound oxygen and variable-valence ions in the exoemission and redox catalysis by mixed oxides is discussed.     

Catalytic properties of chromites with a spinel structure in the oxidation of CO and hydrocarbons and reduction of nitrogen oxides

The catalytic activity of supported chromites MCr₂O₄/-Al₂O₃ (M = Cu, Co, Mn, Zn, Mg) in the oxidation of CO, C₃H₆, and o-xylene and NO_x reduction was studied. The catalytic activity depends on the calcination temperature and cation nature. The features of the formation of the catalysts were studied by the UV-Vis diffuse reflectance and IR spectroscopies.     

Catalytic properties of spinel-type complex oxides in oxidation reactions

The catalytic activity of M^IM^II ₂O₃ spinel-type complex oxides (M^I = Cu, Ni, Mn, Zn, Mg, Co, M^II = Co, Cr, Al) in the oxidation of CO and ethylbenzene has been investigated. The Co-containing catalysts were more active than the Cr- and Al-containing catalysts. The nature of the cation influenced the catalytic activity. Higher activities were observed for the catalysts containing two transition elements. A correlation between the catalytic and adsorption properties was established.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1730–1732, October, 1994.     

Catalytic oxidation of CO,hydrocarbons, and ethyl acetate over perovskite-type complex oxides

The catalytic activity of M^IM^IIO₃] perovskite-type complex oxides (M^I = La, Y, Nd, Yb; M^II = Co, Mn, Ni) in the oxidation of CO, propylene, benzene, ethylbenzene,o-xylene, and ethyl acetate was investigated. The Co-containing catalysts were shown to be more active in the oxidation than the Mn-containing catalysts. A relationship between the catalytic and adsorption properties was established.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 602–605, April, 1994.     

Selective catalytic oxidation of NO over iron and manganese oxides supported on mesoporous silica

The selective catalytic oxidation （SCO） of NO was studied on a catalyst consisting of iron-manganese oxide supported on mesoporous silica （MPS） with different Mn/Fe ratios. Effects of the amount of manganese and iron, oxygen, and calcination temperature on NO conversion were also investigated. It was found that the Mn-Fe/MPS catalyst with a Mn/Fe molar ratio of 1 showed the highest activity at the calcination temperature of 400 °C. The results showed that over this catalyst, NO conversion reached 70% under the condition of 280 °C and a space velocity of 5000 h-1. SO2 and H2O had no adverse impact on the reaction activity when the SCO reaction temperature was above 240 °C. In addition, the SCO activity was suppressed gradually in the presence of SO2 and H2O below 240 °C, and such an effect was reversible after heating treatment.     

Weakly bound oxygen in the catalytic CO oxidation and exoemission from complex oxides having a spinel structure

The catalytic activity of complex oxides M^IM^II ₂O₄ (M^I=Cu, Ni, Co, Zn, or Mg; M^II=Mn or Cr) with a spinel structure in the oxidation of CO and the low-temperature (20–400°C) exoemission of negative charges from their surface were investigated. A relationship between the catalytic activity and the emissivity of the systems under study was found. The role of the charged species of weakly bound oxygen in exoemission and oxidative catalysis by the complex oxides is discussed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1618–1621, September, 1997.     

Catalytic properties of ferrites in oxidation reactions

Catalytic activities of ferrites MFe₂O₄ (M = Cu, Co, Ni, Mg, and Zn) and M¹ _0.5M² _{0 .5}Fe₂O₄ (M¹ = CU; M² = Co, Zn, and Mg) in oxidation of CO and ethylbenzene were investigated, and their dependences on the cation nature were established. Higher activities were observed for catalysts containing ions with variable valence (Cu, Co, and Ni). A correlation between catalytic and adsorption properties of ferrites was found.Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 49–52, January, 1996.     

Ce掺杂对碳纳米管负载Mn催化剂结构及SCR反应性能的影响

采用等体积浸渍法制备多壁碳纳米管(MWCNTs)负载Ce-Mn的催化剂,考察了Ce掺杂对Mn/MWCNTs催化剂上NH₃选择性催化还原(SCR)NO_x反应活性的影响.并运用透射电镜扫描、N₂吸附-脱附、程序升温还原、X射线光电子能谱、X射线衍射等手段,重点考察了Ce掺杂对Mn/MWCNTs催化剂结构性质的影响.结果表明,Ce掺杂能显著提高催化剂的SCR活性,其活性增量随着Ce含量的增加先增大后减小;当Ce/Mn为0.6时,催化剂活性最佳.表征结果显示,Mn/MWCNTs中添加Ce后,金属氧化物在MWCNTs上的分散程度提高;催化剂的比表面积和孔体积增大,平均孔径减小;氧化能力提高;表面氧含量增加,Mn化合价升高;结晶度降低,Mn主要以无定形或微晶形式存在,Ce主要以CeO₂物相存在.     

Selective catalytic reduction of nitrogen monoxide with propene over CuCl/MCM-41 catalysts

Selective catalytic reduction of nitrogen monoxide with propene over two kinds of CuCl/MCM-41 catalysts prepared by a dispersion method has been studied. It was found that CuCl/AlMCM-41 exhibits substantially higher activity over CuCl/SiMCM-41. Characterization of these samples by H₂-TPR, IR and XRD showed that the active copper species were mainly related to Cu²⁺ and Cu⁺ ions in CuCl/AlMCM-41 catalyst.     

过渡金属氧化物掺杂对铜锰氧化物催化CO氧化性能的影响

以乙酸铜和乙酸锰为铜锰前驱体,以NH₄HCO₃为沉淀剂,相应金属硝酸盐为掺杂剂,采用共沉淀法制备了不同过渡金属氧化物掺杂的铜锰氧化物催化剂.?采用N₂物理吸附、X射线衍射,氢气-程序升温还原和原位红外漫反射光谱等方法对催化剂进行了表征,考察了系列催化剂上CO反应性能.?结果表明,掺杂过渡金属氧化物可以调变催化剂对CO的吸附能力,进而影响催化剂性能.     

Catalytic properties of manganites in the oxidation of CO and hydrocarbon

Manganites with a spinel structure MMn₂O₄ (M = Co, Cu, Zn, Mo) and M¹ _0.5M² _0.5 Mn₂O₄ (M = Co, Cu, Zn, Mg) have been synthesized and tested in the catalytic oxidation of CO, C₃H₆, and ethylbenzene. The dependence of the catalytic activity of the manganites on the nature of the cation has been established. The spinels containing transition metal ions (Cu, Co) are more active. A relation between catalytic and adsorption properties of manganites has been established. The participation of the lattice oxygen in the oxidation of CO to CO₂ has been found. The mechanism of the oxidation is discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No, 11, pp, 2686–2669. November, 1996.     

气相色谱法研究胶体金负载纳米金属氧化物催化氧化CO行为

将胶体金负载于不同的金属氧化物纳米材料上,分别制备了Au/TiO2、Au/γ-Al2O3、Au/Fe2O3和Au/ZnO纳米材料,采用透射电子显微镜(TEM)对负载前后的材料进行了表征。利用气相色谱法检测CO的浓度,在选定的色谱条件下,5 min内就实现了快速分离测定,该检测方法的线性范围为1.0×10-6%~10%(体积分数),回收率为96.0%~103.6%,精密度为1.2%~2.3%。应用自制的催化活性评价装置对氧化物纳米材料催化氧化CO的行为进行了研究,结果表明:负载金氧化物纳米材料催化氧化CO的性能在50~200℃均优于相应的未负载金的材料,其中Au/TiO2的催化氧化效果最佳,且在一定气体流速范围内具有稳定的催化活性。     

Impact of metalloporphyrin-based porous coordination polymers on catalytic activities for the oxidation of alkylbenzene

Seven metalloporphyrin-based porous coordination polymers: Fe^ш (TZP)Poly ( CP1 ), Co^II (TZP)Poly ( CP2 ), Ni^II (TZP)Poly ( CP3 ), Cu^II (TZP)Poly ( CP4 ), Zn^II (TZP)Poly ( CP5 ), Mn^II (TZP)Poly ( CP6 ), Pb^II (TZP)Poly ( CP7 ) (TZP = 5,10,15,20- tetrakis[4-(2,3,4,5-tetrazolylphenyl)] porphyrin) were prepared and characterized. CP1−CP7 are amorphous aggregation supported with lower crystallinity by scanning electron microscopy, Brunauer−Emmett−Teller and powder X-ray diffraction. These coordination polymers exhibit effective dye scavenging and catalytic activities toward the oxidation of alkylbenzene to ketones and can be reused by filtration with a slight decreasing of catalytic activities. Metal atoms metalloporphyrin polymers have a great influence on the catalytic activities of metalloporphyrin polymers.     

Influence of nitrogen speciation on the TDN measurement in fresh waters by high temperature catalytic oxidation and persulfate digestion

Analytical methodologies for the determination of total dissolved nitrogen (TDN) in waters are based on a conversion step able to transform selectively all the nitrogen species into a compound that is then quantified. A crucial requirement to meet accuracy is the quantitative recovery of all organic and inorganic nitrogen species during the conversion step. In this work, the N recoveries of two widely employed methodologies that use different conversion steps (high temperature catalytic oxidation (HTCO) and persulfate digestion (PD)) were assessed on a set of organic nitrogen compounds, representative of the structures of both dissolved organic matter (DOM) and anthropogenic contaminants. Low recoveries are due to poor selectivity during the conversion step, with the formation of nitrogen compounds other than nitrogen oxide (HTCO) and nitrate (PD). The results show that in many instances the TDN measurements give systematically low results depending on N speciation. PD could give lower results than HTCO even for samples containing only DOM of biological origin. In particular (i) low N recovery was always observed with compounds having two or more contiguous N atoms; (ii) the HTCO method is very effective for TDN quantification in the presence of s-triazine rings while PD method did not yield satisfactory N recovery; (iii) a full N recovery was observed with compounds having amido or amino groups or nitrogen atoms in imidazole, indole and pyrimidine rings; and (iv) the N recoveries for purine derivatives are almost complete with HTCO, but give systematically low results by PD.

Finally, the estimation of dissolved organic nitrogen (DON) fluxes and pools from TDN measurements can be affected by uncertainties larger than previously thought as a consequence of (i) the lower N recovery for some nitrogen compounds and (ii) the differences in the N recovery as a function of the adopted analytical methods.     

Determination of dissolved organic nitrogen in natural waters using high-temperature catalytic oxidation

Studies on nitrogen in natural waters have generally focussed on dissolved inorganic nitrogen (DIN), primarily because of relative ease of analysis and the important influence of DIN on water quality. Advances in analytical techniques now permit the systematic study of dissolved organic nitrogen (DON), and this work has shown that DON is quantitatively significant in many waters. This article describes the sampling and analytical protocols required for rapid, precise and reliable determinations of DON, involving high-temperature catalytic oxidation (HTCO), coupled to chemiluminescence detection. This approach simultaneously determines dissolved organic carbon (DOC) and total dissolved nitrogen (TDN), and DON is derived by subtraction of DIN measured by colorimetry. The DON determination is simple to perform, exhibits excellent precision (<1% for C and 1.5% for N) and is applicable to a wide range of natural waters.     

锰锆复合氧化物CO催化还原NO性能研究

采用柠檬酸络合法制备了锰锆复合氧化物催化剂,用XRD、H_2-TPR、XPS和SEM等技术进行了表征,研究了其CO催化还原NO性能。结果表明,MnO_x主要以Mn_3O_4物相存在,Zr占比的增加会促进Mn_3O_4物相的分散,引起Mn_3O_4平均晶粒粒径减小;Mn主要有Mn~(2+)、Mn~(3+)、Mn~(4+)离子价态形式,添加Cu和Ce后,(Mn~(3+)+Mn~(4+))含量和表面吸附氧(OA)含量增加,H_2-TPR还原峰温度向低温区偏移,有利于催化活性的提升。Mn-Zr-O复合氧化物的CO催化还原NO活性较低,加入Cu后的Mn-Cu-Zr-O复合氧化物其CO催化还原NO的活性得到改善,而添加Ce后所制备的Mn-Cu-Ce-Zr-O复合氧化物的催化活性进一步提高;在350℃下、反应空速为18000 h~(-1)时,Mn-Cu-Ce-Zr-O复合氧化物表现出较好的CO催化还原NO活性,CO转化率达到了89.17%,NO转化率达到了91.70%。     

Ni-Ti-O混合氧化物的制备、表征及其富氧选择性催化还原NO

采用均匀共沉淀法制备了不同Ni/Ti摩尔比的Ni-Ti-O混合氧化物,考察了它们在富氧条件下丙烯选择性催化还原NO反应中的催化性能,并运用X射线衍射,N₂吸附-脱附、吡啶吸附、程序升温脱附和原位红外光谱对催化剂进行了表征.结果表明,Ni/Ti摩尔比为1的催化剂表现出最佳催化活性,430℃时NO_x转化率达68%.该催化剂具有锐钛矿结构,比表面积较高(149m²/g),有利于提高催化活性;其表面Lewis酸性位有利于硝酸盐物种的吸附,而硝酸盐物种是该反应的重要中间体.     

Cu-Co-Fe oxide catalysts supported on carbon nanotubes for the oxidation of CO

The catalytic activity and adsorption characteristics of the surface of catalysts in the form of carbon nanotubes produced on nickel and cobalt oxides with the Cu-Co-Fe oxide system as supported active phase were studied. At carbon nanotubes produced on nickel oxide with (10 + 10) wt.% of the catalytically active phase total conversion of CO to CO₂ is realized at 47 °C. This sample has high specific surface area and a large volume of mesopores. It was shown that the increase in catalytic activity correlates with the increase in the amount of the α₂ form of CO₂. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 42, No. 4, pp. 222–226, July–August, 2006.     

MO?ZrO2 catalysts for nitrogen oxides reduction by hydrocarbons in oxygen excess. Preparation and properties

The physico-chemical and catalytic properties of MO–ZrO₂ systems (where M is Ca, Sr, Ba) have been studied as a function of the synthesis parameters. Finely powdered heterogeneous mixtures of solid solutions with cubic+monoclinic or tetragonal+monoclinic phase composition were found to be formed. These systems possess quite good high-temperature activity in the reaction of NOx selective reduction by propane under oxygen excess. For a given system, the rate constant depends linearly upon the M–O bond dissociation energy in the surface layer, the slope being positive for Ca and Sr and negative for Ba.