Corroles with group 15 metal ions. Synthesis and characterization of octaethylcorroles containing As, Sb, and Bi ions in +3, +4, and oxidation states

The synthesis, spectroscopic characterization, and electrochemistry of As, Sb, and Bi corroles are reported. The investigated complexes are represented by [(OEC)AsV(CH3)]+ClO4- and (OEC)M where M = As(III), Sb(III), or Bi(III) and OEC is the trianion of octaethylcorrole. The products of each redox reaction are characterized by UV-vis and ESR spectroscopy. The first one-electron oxidations of (OEC)As and (OEC)Sb are metal-centered and result in the formation of [(OEC)AsIV]+ and [(OEC)SbIV]+. A second one-electron oxidations generates [(OEC)AsV]2+ and [(OEC.)SbIV]2+, the latter of which is slowly converted to a Sb(V) corrole, [(OEC)SbV]2+. The first one-electron oxidation of (OEC)Bi leads only to the Bi(III) pi-cation radical, but a second one-electron oxidation is proposed to give a Bi(IV) complex, [(OEC)Bi]2+. The first reduction of [(OEC)AsV(CH3)]+ClO4- is accompanied by loss of the sigma-bonded methyl ligand and formation of an As(III) complex.     

Electrochemical and Spectral Characterization of Iron Corroles in High and Low Oxidation States: First Structural Characterization of an Iron(IV) Tetrapyrrole pi Cation Radical

The electrochemistry and spectroscopic properties of three iron corroles were examined in benzonitrile, dichloromethane, and pyridine containing 0.1 M tetra-n-butylammonium perchlorate or tetra-n-ethylammonium hexafluorophosphate as supporting electrolyte. The investigated compounds are represented as (OEC)Fe(IV)(C(6)H(5)), (OEC)Fe(IV)Cl, and (OEC)Fe(III)(py), where OEC is the trianion of 2,3,7,8,12,13,17,18-octaethylcorrole. Each iron(IV) corrole undergoes two one-electron reductions and two or three one-electron oxidations depending upon the solvent. Under the same solution conditions, the iron(III) corrole undergoes a single one-electron reduction and one or two one-electron oxidations. Each singly oxidized and singly reduced product was characterized by UV-vis and/or EPR spectroscopy. The data indicate a conversion of (OEC)Fe(IV)(C(6)H(5)) and (OEC)Fe(IV)Cl to their iron(III) forms upon a one-electron reduction and to iron(IV) corrole pi cation radicals upon a one-electron oxidation. The metal center in [(OEC)Fe(III)(C(6)H(5))](-) is low spin (S = (1)/(2)) as compared to electrogenerated [(OEC)Fe(III)Cl](-), which contains an intermediate-spin (S = (3)/(2)) iron(III). (OEC)Fe(III)(py) also contains an intermediate-spin-state iron(III) and, unlike previously characterized (OEC)Fe(III)(NO), is converted to an iron(IV) corrole upon oxidation rather than to an iron(III) pi cation radical. Singly oxidized [(OEC)Fe(IV)(C(6)H(5))](*)(+) is the first iron(IV) tetrapyrrole pi cation radical to be isolated and was structurally characterized as a perchlorate salt. It crystallizes in the triclinic space group P&onemacr; with a = 10.783(3) ?, b = 13.826(3) ?, c = 14.151(3) ?, alpha = 78.95(2) degrees, beta = 89.59(2) degrees, and gamma = 72.98(2) degrees at 293 K with Z = 2. Refinement of 8400 reflections and 670 parameters against F(o)(2) yields R1 = 0.0864 and wR2 = 0.2293. The complex contains a five-coordinated iron with average Fe-N bond lengths of 1.871(3) ?. The formulation of the electron distribution in this compound was confirmed by M?ssbauer, X-ray crystallographic, and magnetic susceptibility data as well as by EPR spectroscopy, which gives evidence for strong antiferromagnetic coupling between the iron(IV) center and the singly oxidized corrole macrocycle.     

Tetrakis(dimethyltin)-containing tungstophosphate [{Sn(CH3)2}4(H2P4W24O92)2]28-: first evidence for a lacunary Preyssler ion

We demonstrate for the first time that the superlacunary polyanion [H(2)P(4)W(24)O(94)](22)(-) reacts with electrophiles. One-pot reaction of this precursor polyanion with dimethyltin dichloride in aqueous acidic medium results in the hybrid organic-inorganic [{Sn(CH(3))(2)}(4)(H(2)P(4)W(24)O(92))(2)](28)(-) (1). Single-crystal X-ray analysis was carried out on K(17)Li(11)[{Sn(CH(3))(2)}(4)(H(2)P(4)W(24)O(92))(2)].51H(2)O (1a), which crystallizes in the tetragonal system, space group P4(2)/nmc, a = b = 21.5112(17) and c = 27.171(3) A, and Z = 2. Polyanion 1 is composed of two (P(4)W(24)O(92)) fragments that are linked by four equivalent diorganotin groups. The unprecedented assembly 1 has D(2)(d)() symmetry and contains a hydrophobic pocket in the center of the molecule. The cyclic voltammetry pattern of 1 is constituted by a first broad, 16-electron reduction wave followed by a second large current intensity wave. No splitting of the first reduction wave could be obtained at moderate scan rate values, even though two well-separated oxidation processes are associated with it. The characteristics of the first wave are clearly different from those obtained for the polyanion precursor [H(2)P(4)W(24)O(94)](22)(-) and the related, wheel-shaped [H(7)P(8)W(48)O(184)](33)(-), which is due to the {Sn(CH(3))(2)} fragments in 1. However, no feature was observed in the voltammogram which could be associated with reduction of the Sn centers.     

Cd(2+) Complexation with P(CH(2)OH)(3), OP(CH(2)OH)(3), and (HOCH(2))(2)PO(2)(-): Coordination in Solution and Coordination Polymers

The coordination of Cd(2+) with P(CH(2)OH)(3) (THP) in methanol was followed by (31)P and (111)Cd NMR techniques. A cadmium-to-phosphine coordination ratio of 1:3 has been established, and effective kinetic parameters have been calculated. Air oxidation of THP in the presence of CdCl(2) at room temperature produces coordination polymer (3)(∞)[Cd(3)Cl(6)(OP(CH(2)OH)(3))(2)] (1). The same oxidation reaction at 70 °C gives another coordination polymer, (∞)[CdCl(2)(OP(CH(2)OH)(3))] (2). Complexes 1 and 2 are the first structurally characterized complexes featuring OP(CH(2)OH)(3) as a ligand that acts as a linker between Cd atoms. The addition of NaBPh(4) to the reaction mixture gives coordination polymer (∞)[Na(2)CdCl(2)(O(2)P(CH(2)OH)(2))(2)(H(2)O)(3)] (3) with (HOCH(2))(2)PO(2)(-) as the ligand. Coordination polymers 1-3 have been characterized by X-ray analysis, elemental analysis, and IR spectroscopy.     

Synthesis, Characterization, and Spectroelectrochemistry of Cobalt Porphyrins Containing Axially Bound Nitric Oxide

Several cobalt nitrosyl porphyrins of the form (T(p/m-X)PP)Co(NO) (p/m-X = p-OCH(3) (1), p-CH(3) (2), m-CH(3) (3), p-H (4), m-OCH(3) (5), p-OCF(3) (6), p-CF(3) (7), p-CN (8)) have been synthesized in 30-85% yields by reaction of the precursor cobalt porphyrin with nitric oxide. Compounds 1-7 were also prepared by reaction of the precursor cobalt porphyrin with nitrosonium tetrafluoroborate followed by reduction with cobaltocene. Compounds 1-8 have been characterized by elemental analysis, IR and (1)H NMR spectroscopy, mass spectrometry, and UV-vis spectrophotometry. They are diamagnetic and display nu(NO) bands in CH(2)Cl(2) between 1681 and 1695 cm(-)(1). The molecular structure of 1, determined by a single-crystal X-ray crystallographic analysis, reveals a Co-N-O angle of 119.6(4) degrees. Crystals of 1 are monoclinic, P2/c, with a = 15.052(1) ?, b = 9.390(1) ?, c = 16.274(2) ?, beta = 111.04(1) degrees, V = 2146.8(4) ?(3), Z = 2, T = 228(2) K, D(calcd) = 1.271 g cm(-)(3), and final R1 = 0.0599 (wR2 = 0.1567, GOF = 1.054) for 3330 "observed" reflections with I >/= 2sigma(I). Cyclic voltammetry studies in CH(2)Cl(2) reveal that compounds 1-7 undergo two reversible oxidations and two reversible reductions at low temperature. This is not the case for compound 8, which undergoes two reversible reductions but an irreversible oxidation due to adsorption of the oxidized product onto the electrode surface. Combined electrochemistry-infrared studies demonstrate that each of the compounds 1-7 undergoes a first oxidation at the porphyrin pi ring system and a first reduction at either the metal center or the nitrosyl axial ligand. The formulation for the singly oxidized products of compounds 1-7 as porphyrin pi-cation radicals was confirmed by the presence of bands in the 1289-1294 cm(-)(1) region (for compounds 1-5), which are diagnostic IR bands for generation of tetraarylporphyrin pi-cation radicals.     

Exceptional kinetic propensity of hydroxymethyl phosphanes toward Rh(III) stabilization in water

The reactions of (HOCH2)2P(C6H4)P(CH2OH)2 (HMPB) and P(CH2OH)3 (THP) with RhCl3.xH2O in aqueous media gave water-soluble complexes cis-[RhCl2{eta2-(HOCH2)2P(C6H4)P(CH2OH)2}2]Cl (3) and fac-[RhCl3(P(CH2OH)3)3] (4) respectively in good yields, X-ray crystal structures of 3 and 4 confirmed their molecular constitution. These reactions provide the first examples demonstrating the kinetic propensity of hydroxymethyl phosphanes to stabilize Rh in +3 oxidation state in water.     

Kinetics and mechanism of the oxidation of hydroquinones by a trans-dioxoruthenium(VI) complex

The kinetics of the oxidation of hydroquinone (H(2)Q) and its derivatives (H(2)Q-X) by trans-[Ru(VI)(tmc)(O)(2)](2+) (tmc = 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane) have been studied in aqueous acidic solutions and in acetonitrile. In H(2)O, the oxidation of H(2)Q has the following stoichiometry: trans-[Ru(VI)(tmc)(O)(2)](2+) + H(2)Q --> trans-[Ru(IV)(tmc)(O)(OH(2))](2+) + Q. The reaction is first order in both Ru(VI) and H(2)Q, and parallel pathways involving the oxidation of H(2)Q and HQ(-) are involved. The kinetic isotope effects are k(H(2)O)/k(D(2)O) = 4.9 and 1.2 at pH = 1.79 and 4.60, respectively. In CH(3)CN, the reaction occurs in two steps, the reduction of trans-[Ru(VI)(tmc)(O)(2)](2+) by 1 equiv of H(2)Q to trans-[Ru(IV)(tmc)(O)(CH(3)CN)](2+), followed by further reduction by another 1 equiv of H(2)Q to trans-[Ru(II)(tmc)(CH(3)CN)(2)](2+). Linear correlations between log(rate constant) at 298.0 K and the O-H bond dissociation energy of H(2)Q-X were obtained for reactions in both H(2)O and CH(3)CN, consistent with a H-atom transfer (HAT) mechanism. Plots of log(rate constant) against log(equilibrium constant) were also linear for these HAT reactions.     

Structural and functional characteristics of rhenium clusters derived from redox chemistry of the triangular [ReIII3(mu-Cl)3] core unit

The present study investigates structural and functional aspects of the redox chemistry of rhenium(III) chloride [Re3Cl9] (1) in aqueous and organic solvents, with emphasis on the dioxygen-activating capabilities of reduced rhenium clusters bearing the Re3(8+) core. Dissolution of 1 in HCl (6 M) generates [Re3(mu-Cl)3Cl9]3- (2a), which can be isolated as the tetraphenylphosphonium salt (2b). Anaerobic one-electron reduction of 1 by Hg in HCl (6-12 M) produces [(C6H5)4P]2[Re3(mu-Cl)3Cl7(H2O)2].H2O (3), the structure of which features a planar [Re3(mu-Cl)3Cl3] framework (Re3(8+) core), involving two water ligands that occupy out-of-plane positions in a trans arrangement. Compound 3 dissociates in the presence of CO, yielding [(C6H5)4P]2[ReIII2Cl8] (4) and an unidentified red carbonyl species. In situ oxidation (O2) of the reduced Re3(8+)-containing cluster in HCl (6 M) produces quantitatively 2a, whereas oxidation of 3 in organic media results in the formation of [(C6H5)4P]4[(Re3(mu-Cl)3Cl7(mu-OH))2].2CH2Cl2 (5). The structure of 5 reveals that two oxygen ligands (hydroxo units) bridge asymmetrically two Re3(9+) triangular clusters. The origin of these hydroxo units derives from the aquo ligands, rather than O2, as shown by 18O2 labeling studies. The hydroxo bridges of 5 can be replaced by chlorides upon treatment with Me3SiCl to afford the analogous [(C6H5)4P]4[(Re3(mu-Cl)3Cl7(mu-Cl))2].10CH2Cl2 (6). The reaction of 5 with Hg in HCl (6 M)/tetrahydrofuran regenerates compound 3. Complexes 1-3 exhibit nitrile hydratase type activity, inducing hydrolysis of CH3CN to acetamide. The reaction of 3 with CH3CN yields [(C6H5)4P]2[Re3(mu-Cl)3Cl6.5(CH3CN)1.5(CH3C(O)NH)0.5] (7), the structure of which is composed of [Re3(mu-Cl)3Cl7(CH3CN)2]2- (7a) and [Re3(mu-Cl)3Cl6(CH3CN)(CH3C(O)NH)]2- (7b) (Re3(8+) cores) as a disordered mixture (1:1). Oxidation of 7 with O2 in CH3CN affords [(C6H5)4P]2[Re3(mu-Cl)3Cl7(CH3C(O)NH)].CH3CN (8) and small amounts of [(C6H5)4P][ReO4] (9). Compound 8 is also independently isolated from the reaction of 2b with wet CH3CN, or by dissolving 5 in CH3CN. In MeOH, 5 dissociates to afford [(C6H5)4P]2[Re3(mu-Cl)3Cl8(MeOH)].MeOH (10).     

The effect of charged axial ligands on the EPR parameters in oxovanadium(IV) compounds: an unusual reduction of the Az (51V) values

Two series of octahedral oxovanadium(IV) compounds, containing charged or neutral axial ligands, with the tetradentate amidate molecules Hcapca and H2capcah of the general formulae trans-[V(IV)OX(capca)]0/+ (where X = Cl- (1.CH2Cl2), SCN- (2), N3 (3), CH3COO- (4), PhCOO- (5), imidazole (6. CH3NO2), and eta-nBuNH2 (7)) and cis-[V(VI)OX(Hcapcah)]0/+ (where X = Cl- (8.0.5CH2Cl2), SCN (9), N3 (10.2CH3OH), and imidazole (11)), were synthesized and characterized by X-ray crystallography (1.CH3OH,8.CHCl3, 9.2CH3CN, 10.CH3CN and cis-[VO(imidazole)(Hcapcah)+) and continuous-wave electron paramagnetic resonance (cw EPR) spectroscopy. In addition to the synthesis, crystallographic and EPR studies, the optical, infrared and magnetic properties (room temperature) of these compounds are reported. Ab initio calculations were also carried out on compound 8 CHCl3 and revealed that this isomer is more stable than the trans isomer, in good agreement with the experimental data. The cw EPR studies of compounds 1-5, that is, the V(IV)O2+ species containing monoanionic axial ligands, revealed a novel phenomenon of the reduction of their A, components by about 10% relative to the N4 reference compounds ([V(IV)O-(imidazole)4]2+ and [V(IV)O(2,2-bipyridine)2]2+). In marked contrast, such a reduction is not observed in compounds 6. CH3NO2-11, which contain neutral axial ligands. Based on the spin-Hamiltonian formalism a theoretical explanation is put forward according to which the observed reduction of Az is due to a reduction of the electron - nuclear dipolar coupling (P). The present findings bear strong relevance to cw EPR studies of oxovanadium(IV) in vanadoproteins, V(IV)O2+-substituted proteins, and in V(IV)O2+ model compounds, since the hyperfine coupling constant, Az, has been extensively used as a benchmark for identification of equatorial-donor-atom sets in oxovanadium(IV) complexes.     

Molybdenum triamidoamine complexes that contain hexa-tert-butylterphenyl, hexamethylterphenyl, or p-bromohexaisopropylterphenyl substituents. An examination of some catalyst variations for the catalytic reduction of dinitrogen

Three new tetramines, (ArNHCH(2)CH(2))(3)N, have been synthesized in which Ar = 3,5-(2,4,6-t-Bu(3)C(6)H(2))(2)C(6)H(3) (H(3)[HTBTN(3)N]), 3,5-(2,4,6-Me(3)C(6)H(2))(2)C(6)H(3) (H(3)[HMTN(3)N]), or 4-Br-3,5-(2,4,6-i-Pr(3)C(6)H(2))(2)C(6)H(2) (H(3)[pBrHIPTN(3)N]). The diarylated tetramine, [3,5-(2,4,6-t-Bu(3)C(6)H(2))(2)C(6)H(3)NHCH(2)CH(2)](2)NCH(2)CH(2)NH(2), has also been isolated, and the "hybrid" tetramine [3,5-(2,4,6-t-Bu(3)C(6)H(2))(2)C(6)H(3)NHCH(2)CH(2)](2)NCH(2)CH(2)NH(4-t-BuC(6)H(4)) has been prepared from it. Monochloride complexes, [(TerNCH(2)CH(2))(3)N]MoCl, have been prepared, as well as a selection of intermediates that would be expected in a catalytic dinitrogen reduction such as [(TerNCH(2)CH(2))(3)N]Mo[triple bond]N and [[(TerNCH(2)CH(2))(3)N]Mo(NH(3))][BAr'(4)] (Ter = HTBT, HMT, or pBrHIPT and Ar' = 3,5-(CF(3))(2)C(6)H(3))). Intermediates that contain the new terphenyl-substituted ligands are then evaluated for their efficiency for the catalytic reduction of dinitrogen under conditions where analogous [HIPTN(3)N]Mo species give four turnovers to ammonia under "standard" conditions with an efficiency of approximately 65%. Only [pBrHIPTN(3)N]Mo compounds are efficient catalysts for dinitrogen reduction. The reasons are explored and discussed.     

Dinuclear palladium(II) compounds with bridging cyclometalated phosphines. Synthesis, crystal structure and electrochemical study

The structural characterization of bis-cyclometalated palladium(II) compounds of formula Pd2[(micro-(C6X4)PPh2]2(micro-O2CR)2 [X = H, R = CH3 (3), CF3 (4), C(CH3)3 (5) and C6F5 (6); X = F, R = CH3 (7) and CF3 (8)], has confirmed its paddle wheel structure with two palladium atoms bridged by two acetates and two metalated phosphines in a head-to-tail arrangement. The Pd...Pd distances are in the range 2.6779(16)-2.7229(8) A. Under cyclic voltammetric conditions, compounds 3-6, in CH2Cl2 solution, were found to undergo a reversible oxidation peak in the range of potential values 0.84-1.25 V. A second partially-reversible oxidation is observed at more positive potentials (1.37-1.55 V). For compounds 3-5 in the presence of chlorides, the first oxidation becomes a two-electron process presumably leading to a neutral [Pd(III)-Pd(III)] species with a metal-metal bond.     

Synthesis, structure, electrochemistry, and spectroelectrochemistry of hypervalent phosphorus(V) octaethylporphyrins and theoretical analysis of the nature of the PO bond in P(OEP)(CH(2)CH(3))(O)

A variety of phosphorus(V) octaethylporphyrin derivatives of the type [P(OEP)(X)(Y)](+)Z(-) (OEP: octaethylporphyrin) (X = CH(3), CH(2)CH(3), C(6)H(5), F; Y = CH(3), CH(2)CH(3), OH, OCH(3), OCH(2)CH(3), On-Pr, Oi-Pr, Osec-Bu, NHBu, NEt(2), Cl, F, O(-); Z = ClO(4), PF(6)) were prepared. X-ray crystallographic analysis of eleven compounds reveals that the degree of ruffling of the porphyrin core becomes greater and the average P-N bond distance becomes shorter as the axial ligands become more electronegative. Therefore, the electronic effect of the axial substituents plays a major role in determining the degree of ruffling although the steric effect of the substituents plays some role. A comparison of the (1)H NMR chemical shifts for the series of [P(OEP)(CH(2)CH(3))(Y)](+)Z(-) complexes with those of the corresponding arsenic porphyrins, which possess a planar core, indicates a much smaller ring current effect of the porphyrin core in the severely ruffled phosphorus porphyrins. The electrochemistry, spectroelectrochemistry and ESR spectroscopy of the singly reduced compounds are also discussed. The OH protons of [P(OEP)(X)(OH)](+) are acidic enough to generate P(OEP)(X)(O) by treatment with aq dilute NaOH. X-ray analysis of P(OEP)(CH(2)CH(3))(O) reveals that the PO bond length is very short (1.475(7) A) and is comparable to that in triphenylphosphine oxide (1.483 A). The features of the quite unique hexacoordinate hypervalent compounds are investigated by density functional calculation of a model (Por)P(CH(2)CH(3))(O) and (Por)P(F)(O) (Por: unsubstituted porphyrin).     

Density functional theory analysis of the reaction pathway for methane oxidation to acetic acid catalyzed by Pd2+ in sulfuric acid

Density functional theory has been used to investigate the thermodynamics and activation barriers associated with the direct oxidation of methane to acetic acid catalyzed by Pd2+ cation in concentrated sulfuric acid. Pd2+ cations in such solutions are ligated by two bisulfate anions and by one or two molecules of sulfuric acid. Methane oxidation is initiated by the addition of CH4 across one of the Pd-O bonds of a bisulfate ligand to form Pd(HSO4)(CH3)(H2SO4)2. The latter species will react with CO to produce Pd(HSO4)(CH3CO)(H2SO4)2. The most likely path to the final products is found to be via oxidation of Pd(HSO4)(CH3)(H2SO4)2 and Pd(HSO4)(CH3CO)(H2SO4)2 to form Pd(eta2-HSO4)(HSO4)2(CH3)(H2SO4) and Pd(eta2-HSO4)(HSO4)2(CH3CO)(H2SO4), respectively. CH3HSO4 or CH3COHSO4 is then produced by reductive elimination from the latter two species, and CH(3)COOH is then formed by hydrolysis of CH3COHSO4. The loss of Pd2+ from solution to form Pd(0) or Pd-black is predicted to occur via reduction with CO. This process is offset, though, by reoxidation of palladium by either H2SO4 or O2.     

New oligophosphines and (hydroxymethyl)phosphonium chlorides

The new oligophosphines [H2P(CH2)2]2PH, [H2P(CH2)2P(H)CH2]2, and{[(H2P(CH2)2]2PCH2}2 have been made by hydrophosphination of diethyl vinylphosphonate (2) with H2P(CH2)2PH2 (1), using different ratios of 2/1, followed by LiAlH4 reduction of the phosphonate intermediates; the three phosphonate precursors were obtained as oils of varying purity (approximately 90-95%) in low (approximately 20%) to almost quantitative yield. The tri-, tetra-, and hexaphosphines were then treated with formaldehyde in the presence of hydrochloric acid to generate the corresponding water-soluble (hydroxymethyl)phosphonium chlorides {(HOCH2)3P[(CH2)2P(CH2OH)2]n(CH2)2P(CH2OH)3}Cl m (n = 1, m = 3; n = 2, m = 4) and {[(HOCH2)3P(CH2)2]2P(CH2OH)CH2}2Cl6 that were characterized by NMR spectroscopy and elemental analysis. The known (hydroxymethyl)bisphosphonium chloride [(HOCH2)3P(CH2)2]2Cl2 was similarly prepared from H2P(CH2)2PH2, and the determined crystal structure revealed strong hydrogen bonding between the chloride anions and the hydrogen atoms of the hydroxymethyl groups.     

X-ray structures and homolysis of some alkylcobalt(III) phthalocyanine complexes

The first crystallographic data for sigma-bonded alkylcobalt(III) phthalocyanine complexes are reported. A single-crystal X-ray structure of CH(3)CH(2)Co(III)Pc (Pc = dianion of phthalocyanine) reveals that the solid consists of centrosymmetric face-to-face dimers in which the CH(3)CH(2)Co(III)Pc units retain their square pyramidal geometry. The structure appears to be the first one reported for a five-coordinate RCo(III)(chelate) complex with an electron-deficient equatorial system. The Co-C bond in CH(3)CH(2)Co(III)Pc (2.031(5) A) is the longest found in five-coordinate RCo(III)(chel) complexes (R = simple primary alkyl group). Another X-ray study demonstrates that CH(3)Co(III)Pc(py) has a distorted octahedral geometry with axial bonds of very similar length to those in methylcobalamin. The axial bonds are shorter than those in its octaethylporphyrin analogue, in accordance with a weaker trans axial influence in six-coordinate complexes containing an electron-deficient phthalocyanine equatorial ligand. A different trend has been observed for five-coordinate RCo(III)(chel) complexes: electron-rich equatorial systems seem to make the Co-C axial bond shorter. Kinetic data for the homolysis of RCo(III)Pc complexes (R = Me, Et) in dimethylacetamide are also reported. Homolysis of ethyl derivatives is faster. The Co-C bond dissociation energies (BDEs) for the pyridine adducts of the methyl and the ethyl derivative are 30 +/- 1 and 29 +/- 1 kcal/mol, respectively. The BDE for CH(3)CoPc(py) is considerably lower than that for MeCbl despite the very similar lengths of the axial bonds in the two complexes. The results of this work do not support any correlation between the Co-C bond length and the bond strength as defined by BDE.     

Synthesis, electrochemistry, and spectroscopic characterization of bis-dirhodium complexes linked by axial ligands

The synthesis and electrochemical and spectroscopic properties of bis-dirhodium complexes containing ap or dpf bridging ligands, (ap)(4)Rh(2)(C triple bond C)(2)Rh(2)(ap)(4) (2) and (dpf)(4)Rh(2)(CNC(6)H(4)NC)Rh(2)(dpf)(4) (4), were investigated (where ap and dpf are the 2-anilinopyridinate and N,N'-diphenylformamidinate ions, respectively). The related "simple" dirhodium species, (ap)(4)Rh(2)(C triple bond C)(2)Si(CH(3))(3) (1) and (dpf)(4)Rh(2)(CNC(6)H(5)) (3), with the same set of bridging ligands were also synthesized and their properties compared to those of the analogous bis-dirhodium complexes. Compound 1 was obtained by mixing (ap)(4)Rh(2)Cl and Li(C triple bond C)(2)Si(CH(3))(3) in refluxing THF for 16 h under vacuum while compound 2 was prepared by a reaction between (ap)(4)Rh(2)(C triple bond C)(2)Li and (ap)(4)Rh(2)Cl under similar conditions. The reaction between (CF(3)COO)(4)Rh(2) and molten Hdpf under vacuum for 24 h leads to the generation of compound 3 with a yield of 65%. The red-orange compound 4 was obtained upon addition of 0.5 equiv of CNC(6)H(4)NC at room temperature to a CH(2)Cl(2) solution containing (dpf)(4)Rh(2) which was synthesized according to a method described previously in the literature. Compound 1 crystallizes in the triclinic space group P1, with a = 10.164(3) A, b = 13.881(3) A, c = 18.805(4) A, alpha = 73.55(2) degrees, beta = 77.89(2) degrees, gamma = 84.85(2) degrees, and Z = 2. Crystals of 2 were not good enough to collect adequate data for X-ray analysis, but the identity of this compound was confirmed, along with its P1; space group. Crystals of 3 and 4 belong to the monoclinic, P2(1)/c space group and the triclinic, P1; space group, respectively, with a = 13.5254(5) A, b = 13.7387(4) A, c = 27.2011(12) A, beta = 102.637(2) degrees, and Z = 4 for 3 and a = 13.866(8) A, b = 14.756(7) A, c = 15.008(6) A, alpha = 79.91(3) degrees, beta = 87.72(4) degrees, gamma = 89.19(4) degrees, and Z = 1 for 4. Compound 1 exhibits a single reversible oxidation at E(1/2) = 0.66 V and a single reversible reduction at E(1/2) = -0.44 V vs SCE in THF, 0.2 M TBAP. Both processes involve a one-electron transfer. Compound 2 undergoes a reversible oxidation at E(1/2) = 0.60 V and two separate one-electron-transfer reductions at E(1/2) = -0.52 and -0.65 V in THF, 0.2 M TBAP. The oxidation involves two overlapped one-electron-transfer processes. Compounds 3 and 4 undergo two reversible oxidations in CH(2)Cl(2), 0.1 M TBAP located at E(1/2) = 0.23 and 1.22 V (3) or 0.22 and 1.20 V (4). Each redox reaction of 3 involves a one-electron-transfer step while each redox reaction of 4 involves two overlapping one-electron transfers. Compound 2 shows interaction between the two dirhodium cores upon reduction, while 4 gives no evidence of electronic interaction between the two dirhodium units during either reduction or oxidation. An ESR signal with axial symmetry was obtained for the neutral compounds 1 and 2, and a similar spectrum was obtained for the singly oxidized products of compounds 3 and 4, thus suggesting the electronic configuration of (sigma)(2)(pi)(4)(delta)(2)(pi)(4)(delta)(1) for the neutral compounds 1 and 2 as well as for the oxidized compounds 3 and 4. The four compounds were also characterized by FTIR and UV-visible spectroscopy as well as by mass spectrometry.     

Synthesis of molybdenum complexes that contain "hybrid" triamidoamine ligands, [(hexaisopropylterphenyl-NCH2CH2)2NCH2CH2N-aryl]3-, and studies relevant to catalytic reduction of dinitrogen

In the Buchwald-Hartwig reaction between HIPTBr (HIPT = 3,5-(2,4,6-i-Pr3C6H2)2C6H3 = hexaisopropylterphenyl) and (H2NCH2CH2)3N, it is possible to obtain a 65% isolated yield of (HIPTNHCH2CH2)2NCH2CH2NH2. A second coupling then can be carried out to yield a variety of "hybrid" ligands, (HIPTNHCH2CH2)2NCH2CH2NHAr, where Ar = 3,5-Me2C6H3, 3,5-(CF3)2C6H3, 3,5-(MeO)2C6H3, 3,5-Me2NC5H3, 3,5-Ph2NC5H3, 2,4,6-i-Pr3C6H2, or 2,4,6-Me3C6H2. The hybrid ligands may be attached to Mo to yield [hybrid]MoCl species. From the monochloride species, a variety of other species such as [hybrid]MoN, {[hybrid]MoN2}Na, and {[hybrid]Mo(NH3)}+ can be prepared. [Hybrid]MoN2 species were prepared through oxidation of {[hybrid]MoN2}Na species with ZnCl2, but they could not be isolated. [Hybrid]Mo=N-NH species could be observed as a consequence of the protonation of {[hybrid]MoN2}- species, but they too could not be isolated as a consequence of a facile decomposition to yield dihydrogen and [hybrid]MoN2 species. Attempts to reduce dinitrogen catalytically led to little or no ammonia being formed from dinitrogen. The fact that no ammonia was formed from dinitrogen in the case of Ar = 3,5-Me2C6H3, 3,5-(CF3)2C6H3, or 3,5-(MeO)2C6H3 could be attributed to a rapid decomposition of intermediate [hybrid]Mo=N-NH species in the catalytic reaction, a decomposition that was shown in separate studies to be accelerated dramatically by 2,6-lutidine, the conjugate base of the acid employed in the attempted catalytic reduction. X-ray structures of [(HIPTNHCH2CH2)2NCH2CH2N{3,5-(CF3)2C6H3}]MoCl and [(HIPTNHCH2CH2)2NCH2CH2N(3,5-Me2C6H3)]MoN2}Na(THF)2 are reported.     

Modeling the active sites in metalloenzymes. 3. Density functional calculations on models for [Fe]-hydrogenase: structures and vibrational frequencies of the observed redox forms and the reaction mechanism at the Diiron Active Center.

Optimized structures for the redox species of the diiron active site in [Fe]-hydrogenase as observed by FTIR and for species in the catalytic cycle for the reversible H(2) oxidation have been determined by density-functional calculations on the active site model, [(L)(CO)(CN)Fe(mu-PDT)(mu-CO)Fe(CO)(CN)(L')](q)(L = H(2)O, CO, H(2), H(-); PDT = SCH(2)CH(2)CH(2)S, L' = CH(3)S(-), CH(3)SH; q = 0, 1-, 2-, 3-). Analytical DFT frequencies on model complexes (mu-PDT)Fe(2)(CO)(6) and [(mu-PDT)Fe(2)(CO)(4)(CN)(2)](2)(-) are used to calibrate the calculated CN(-) and CO frequencies against the measured FTIR bands in these model compounds. By comparing the predicted CN(-) and CO frequencies from DFT frequency calculations on the active site model with the observed bands of D. vulgaris [Fe]-hydrogenase under various conditions, the oxidation states and structures for the diiron active site are proposed. The fully oxidized, EPR-silent form is an Fe(II)-Fe(II) species. Coordination of H(2)O to the empty site in the enzyme's diiron active center results in an oxidized inactive form (H(2)O)Fe(II)-Fe(II). The calculations show that reduction of this inactive form releases the H(2)O to provide an open coordination site for H(2). The partially oxidized active state, which has an S = (1)/(2) EPR signal, is an Fe(I)-Fe(II) species. Fe(I)-Fe(I) species with and without bridging CO account for the fully reduced, EPR-silent state. For this fully reduced state, the species without the bridging CO is slightly more stable than the structure with the bridging CO. The correlation coefficient between the predicted CN(-) and CO frequencies for the proposed model species and the measured CN(-) and CO frequencies in the enzyme is 0.964. The proposed species are also consistent with the EPR, ENDOR, and M?ssbauer spectroscopies for the enzyme states. Our results preclude the presence of Fe(III)-Fe(II) or Fe(III)-Fe(III) states among those observed by FTIR. A proposed reaction mechanism (catalytic cycle) based on the DFT calculations shows that heterolytic cleavage of H(2) can occur from (eta(2)-H(2))Fe(II)-Fe(II) via a proton transfer to "spectator" ligands. Proton transfer to a CN(-) ligand is thermodynamically favored but kinetically unfavorable over proton transfer to the bridging S of the PDT. Proton migration from a metal hydride to a base (S, CN, or basic protein site) results in a two-electron reduction at the metals and explains in part the active site's dimetal requirement and ligand framework which supports low-oxidation-state metals. The calculations also suggest that species with a protonated Fe-Fe bond could be involved if the protein could accommodate such species.     

On, off and intermediate coordination of a bridgehead triarylamine donor in tripodal complexes: towards the tuning of coordinative bond distance

A series of first row transition metal complexes of the tripodal ligand 2,2',2"-nitrilotribenzoic acid H3L has been prepared and characterised by X-ray crystallography: Mononuclear [M(L)]- species [Cu(H2O)4]3[Cu(L)(H2O)]6.25H2O (2), [Co(H2O)6][Co(L)(H2O)].8H2O (4), [Zn(H2O)6][Zn(L)(H2O)].8H2O (5) and a neutral [M(L)] complex [Fe(III)2(L)(H2O)3].5H2O (8) are formed as well as dimeric [M(L)]2 2- species (HNEt3)2[Cu(L)]2.2CH3CN (1), (HNEt3)3[Ni(L)]2(ClO4).H2O (3), (HNEt3)2[Fe(II)(L)]2.2CH3CN (6) and (HNEt3)2[Fe(III)2(L)2(mu-O)](7). The complexes display a unique variation in the M-N distance (2.09 A for Cu(II) to 3.29 A for Fe(III)) to the bridgehead triphenylamine donor and are classified into compounds with "On","Off" and "Intermediate" N-coordination. The trigonal-bipyramidal coordination polyhedron changes towards tetrahedral in the intermediate and octahedral in the Off-state. The M-N distance of individual complexes is reversibly tuned by external chemical input such as changes of metal ion oxidation state (Fe(II)/Fe(III)) or variation of the axial coligand as a consequence of solvent or pH variation. Possible reasons for the exceptional tolerance of the M-N bond to distance variations are discussed under consideration of gas phase DFT calculations of [Zn(L)]-.