Analysis of chromium(III)-fluoride-complexes by ion chromatography

A method for the ion chromatographic separation of cationic CrF(x)-species in aqueous acidic solutions with photometric detection is described. CrF(3)-, CrF(+)(2)- and CrF(2+)-species can be separated on a commercial cation-exchange column using HCl/2,3-diaminopropionic acid (DAP) as eluent. The chromium(III)-complexes are converted with 2,6- pyridinedicarboxylic acid (PDCA) into the violet [Cr(PDCA)(2)](-)-complex at temperatures >90 degrees C by post-column derivatisation for the subsequent spectrophotometric detection at lambda=335 nm. Iron- and nickel-ions do not disturb the determination even in concentrations higher than those of the chromium (III)-ions.     

Magnetic face-to-face interaction and electrocommunication in chromium sandwich compounds

The reaction of [{(C5Me5)CrCl2}2] with [2.2](1,4)cyclophane gave [(C5Me5)Cr{[2.2](1,4)cyclophane}] (1) and [(C5Me5)Cr{[2.2](1,4)cyclophane}Cr(C5Me5)] (2), depending on the reaction conditions. X-ray structure analysis showed 2 to be a ministack which in turn is stacked in the lattice. The chromium atoms are 6.035 A apart, and the distortion of the benzene rings to boat-shaped moieties is less pronounced than in parent [2.2](1,4)cyclophane. The NMR and EPR spectra were consistent with a S=1/2 ground state for 1 and with two interacting S=1/2 centers in 2. Spin density was found in the ligand pi systems, where its sign was negative when the pi system was adjacent to chromium, while on the nonbonded benzene moiety of 1 it was positive. Cyclic voltammograms showed reductions to 1- and 2(2-), as well as oxidations to 1+, 2+, and 2(2+) which were quasireversible, whereas oxidations to 1(2+) and 2(3+) were irreversible. Interaction between the metal ions was revealed by a 260 mV separation of the redox waves belonging to 2+, and 2(2+). Both cations were isolated as [B(C6H5)4]- salts, which in solution decomposed to [2.2](1,4)cyclophane and [(C5Me5)Cr{(eta6-C6H5)B(C6H5)3}] (3). The 1H and 13C NMR spectra of 3 were in accordance with an S=1 ground state. Solid-state magnetic measurements of the dimetallic compounds showed antiferromagnetic interaction with J=-122 cm-1 for 2, J=-31 cm-1 for 2+ (ground state S=1/2), and J=-23.5 cm-1 for 2(2+) (with H=-JS1S2). The decrease of J in the series 2, 2+, and 2(2+) was traced to the number of unpaired electrons and, for the mixed-valent cation 2+, to additional double exchange.     

Structural and spectroscopic properties of trans-difluoro(1,4,8,12-tetraazacyclopentadecane)chromium(III) perchlorate hydrate

The structure of [CrF(2)([15]aneN(4))]ClO(4).H(2)O ([15]aneN(4)=1,4,8,12-tetraazacyclopentadecane) has been determined by a single-crystal X-ray diffraction study at 173 K. The complex crystallizes in the space group P1- of the triclinic system with two mononuclear formula units in a cell of dimensions a=9.6117(7) A, b=10.2882(7) A, c=11.0001(7) A and alpha=99.7570(10) degrees, beta=105.6080(10) degrees and gamma=113.7130(10) degrees. The complex cation unit has its central Cr atom in an octahedral coordination with four nitrogen atoms and two fluorine atoms in a trans position. Three six-membered and one five-membered chelate rings of the [15]aneN(4) ligand are in a chair-twist(skew)-chair-gauche conformation sequence. The gauche five-membered ring is disordered with the twist six-membered ring opposite. The four H atoms in the chiral N atoms have the trans-II (CTCg) type configuration. The mean Cr-N and Cr-F bonds are 2.095(2) and 1.8752(13) A, respectively. The IR and visible spectral properties are consistent with the result of X-ray crystallography. The resolved band maxima of the electronic d-d spectrum are fitted with secular determinant for quartet state energy of d(3) configuration in tetragonal field including configurational but neglecting spin-orbit coupling. It is confirmed that the fluoride has strong sigma- and pi-donor properties toward the chromium(III) ion and the nitrogen atoms of the [15]aneN(4) ligand also have a strong sigma-donor character.     

A potentiometric rhodamine-B based membrane sensor for the selective determination of chromium ions in wastewater.

The construction and performance characteristics of a novel chromate ion-selective membrane sensor are described and used for determining chromium(III) and chromium(VI) ions. The sensor is based on the use of a rhodamine-B chromate ion-associate complex as an electroactive material in a poly(vinyl chloride) membrane plasticized with o-nitrophenyloctyl ether as a solvent mediator. In a phosphate buffer solution of pH 6 - 7, the sensor displays a stable, reproducible and linear potential response over the concentration range of 1 x 10(-1) - 5 x 10(-6) mol l(-1) with an anionic Nernstian slope of 30.8 +/- 0.5 mV decade(-1) and a detection limit of 1 x 10(-6) mol l(-1) Cr(VI). High selectivity for Cr(VI) is offered over many common anions (e.g., I-, Br-, Cl-, IO4-, CN-, acetate, oxalate, citrate, sulfate, phosphate, thiosulfate, selenite, nitrate) and cations (e.g., Ag+, Ca2+, Sr2+, Co2+, Ni2+, Cu2+, Mn2+, Fe2+, Zn2+, Cd2+, Al3+, Cr3+). The sensor is used for determining Cr(VI) and/or Cr(III) ions in separate or mixed solutions after the oxidation of Cr(III) into Cr(VI) with H2O2. As low as 0.2 microg ml(-1) of chromium is determined with a precision of +/-1.2%. The chromium contents of some wastewater samples were accurately assessed, and the results agreed fairly well with data obtained by atomic absorption spectrometry.     

Fluoride-bridged {Ln(2)Cr(2)} polynuclear complexes from semi-labile mer-[CrF(3)(py)(3)] and [Ln(hfac)(3)(H(2)O)(2)

The trifluorido complex mer-[CrF(3)(py)(3)] (py = pyridine) reacts with 1 equiv. of [Ln(hfac)(3)(H(2)O)(2)] and depending on the solvent forms the tetranuclear clusters [Cr(2)Ln(2)(μ-F)(4)(μ-OH)(2)(py)(4)(hfac)(6)], 1Ln, and [Cr(2)Ln(2)(μ-F)(4)F(2)(py)(6)(hfac)(6)], 2Ln, in acetonitrile and 1,2-dichloroethane, respectively (Ln = Y, Gd, Tb, Dy, Ho, and Er; hfacH = 1,1,1,5,5,5-hexafluoroacetylacetone). Reaction with [Dy(hfac)(3)(H(2)O)(2)] in dichloromethane produces the dinuclear cluster [CrDy(μ-F)F(OH(2))(py)(3)(hfac)(4)], 3Dy. All the clusters feature fluoride bridges between the chromium(iii) and lanthanide(iii) centres. Fits of susceptibility data for 1Gd and 2Gd reveal the fluoride-mediated chromium(iii)-lanthanide(iii) exchange interactions to be 0.43(5) cm(-1) and 0.57(7) cm(-1), respectively (in the convention). Heat capacity measurements on 2Gd reveal a moderate magneto-caloric effect (MCE) reaching -ΔS(m)(T) = 11.4 J kg(-1) K(-1) for ΔB(0) = 9 T → 0 T at T = 4.1 K. Out-of-phase alternating-current susceptibility (χ') signals are observed for 1Dy, 2Dy and 2Tb, demonstrating slow relaxation of the magnetization.     

Novel potentiometric membrane sensor for the determination of trace amounts of chromium(III) ions.

A plasticized Cr3+ ion sensor by incorporating 2,3,8,9-tetraphenyl-1,4,7,10-tetraazacyclododeca-1,3,7,9-tetraene (TTCT) ionophore exhibits a good potentiometric response for Cr3+ over a wide concentration range (1.0 x 10(-6)-1.0 x 10(-1) M) with a slope of 19.5 mV per decade. The sensor response is stable for at least three months. Good selectivity for Cr3+ in comparison with alkali, alkaline earth, transition and heavy metal ions, and minimal interference are caused by Li+, Na+, K+, Co2+, Hg2+, Ca2+, Pb2+ and Zn2+ ions, which are known to interfere with other chromium membrane sensors. The TTCT-based electrode shows a fast response time (15 s), and can be used in aqueous solutions of pH 3-5.5. The proposed sensor was used for the potentiometric titration of Cr3+ with EDTA and for a direct potentiometric determination of Cr3+ content in environmental samples.     

Hexavalent chromium recovery by liquid-liquid extraction with tributylphosphate from acidic chloride media.

A method is introduced for recuperation of chromium(VI) in water samples by liquid-liquid extraction with tributylphosphate PO(C4H9O)3 (TBP) from acidic chloride media. The optimum conditions for quantitative extraction of Cr(VI) were evaluated by varying the experimental parameters, such as the shaking period, the pH of the aqueous phase, the hydrochloric acid concentration, the hydrogen and chloride ion concentrations, the extractant concentration and the ratio of aqueous-to-organic phase. The probable extracted species of hexavalent chromium in organic phase, deduced from log-log plots, were H2CrO4 in acid media in absence of chloride and HCrO3Cl in acidic chloride media. Chromium(VI) was found to be extracted with tributylphosphate from acidic chloride media according to the following reaction: HCrO4-(aq), + 2H+(aq) + Cl-(aq) + 2TBP(org) <==> [HCrO3Cl, 2TBP](org) + H2O(aq). Since the tributylphosphate (TBP) exhibited a high selectivity for chromium(VI), this method can be applicable to the extraction and the determination of chromium in both oxidation states [Cr(VI) and Cr(III)] in water samples.     

Preparation and characterization of the argentates: [Ag[P(CF(3))(2)](2)](-), [Ag[(micro-P(CF(3))(2))M(CO)(5)](2)](-) (M = Cr, W), and [Ag[(micro-P(C(6)F(5))(2))W(CO)(5)](2)](-): X-ray crystal structure of [K(18-crown-6)][Ag[(micro-P(CF(3))(2))Cr(CO)(5)](2)

The first example of a mononuclear diphosphanidoargentate, bis[bis(trifluoromethyl)phosphanido]argentate, [Ag[P(CF(3))(2)](2)](-), is obtained via the reaction of HP(CF(3))(2) with [Ag(CN)(2)](-) and isolated as its [K(18-crown-6)] salt. When the cyclic phosphane (PCF(3))(4) is reacted with a slight excess of [K(18-crown-6)][Ag[P(CF(3))(2)](2)], selective insertion of one PCF(3) unit into each silver phosphorus bond is observed, which on the basis of NMR spectroscopic evidence suggests the [Ag[P(CF(3))P(CF(3))(2)](2)](-) ion. On treatment of the phosphane complexes [M(CO)(5)PH(CF(3))(2)] (M = Cr, W) with [K(18-crown-6)][Ag(CN)(2)], the analogous trinuclear argentates, [Ag[(micro-P(CF(3))(2))M(CO)(5)](2)](-), are formed. The chromium compound [K(18-crown-6)][Ag[(micro-P(CF(3))(2))Cr(CO)(5)](2)] crystallizes in a noncentrosymmetric space group Fdd2 (No. 43), a = 2970.2(6) pm, b = 1584.5(3) pm, c = 1787.0(4), V = 8.410(3) nm(3), Z = 8. The C(2) symmetric anion, [Ag[(micro-P(CF(3))(2))Cr(CO)(5)](2)](-), shows a nearly linear arrangement of the P-Ag-P unit. Although the bis(pentafluorophenyl)phosphanido compound [Ag[P(C(6)F(5))(2)](2)](-) has not been obtained so far, the synthesis of its trinuclear counterpart, [K(18-crown-6)][Ag[(micro-P(C(6)F(5))(2))W(CO)(5)](2)], was successful.     

Surface characterization of chromia for chlorine/fluorine exchange reactions

The dismutation of CCl(2)F(2) was used to probe the effect of halogenation of chromia by Cl/F exchange reactions to find out the difference between the halogenated inactive and active catalysts. The heterogeneous reactions were performed in a continuous flow Ni reactor and also under simulated reaction conditions in a reactor where after the reaction X-ray photoelectron spectroscopy (XPS) and X-ray excited Auger electron spectroscopy (XAES) analyses are possible without air exposure of the catalyst, i.e., under so-called "in situ" conditions. The Cr(III) 2p XP spectra, which revealed multiplet splitting features and satellite emission, were used for chemical analysis by using a simple evaluation procedure which neglects this inherent complexity. Chemical analysis was also applied by using chemical state plots for Cr 3s in order to cross-check Cr 2p related results. Both ex and in situ XPS show that as soon as Cr(2)O(3) is exposed to CCl(2)F(2) at 390 degrees C fluorination as well as chlorination takes place at the catalyst surface. When the XPS surface composition reaches approximately 4 at. % fluorination and 6 at. % chlorination, maximum catalytic activity was obtained. Application of longer reaction times did not change significantly the obtained surface composition of the activated chromia. The fluorination and chlorination of chromia was further investigated by various HF and HCl treatments. The activated chromia samples and the Cr(2)O(3), Cr(OH)(3), CrF(2)OH, CrF(3) x H(2)O, alpha-CrF(3), beta-CrF(3), and CrCl(3) reference samples with well-known chemical structures were also characterized by X-ray absorption near edge structure (XANES), time-of-flight secondary ion mass spectroscopy (TOF-SIMS), pyridine-FTIR, wet chemical (F and Cl) analysis, X-ray powder diffraction (XRD), and surface area (BET) analysis. The results suggest that the formation of chromium oxide chloride fluoride species, e.g., chromium oxide halides, at the surface is sufficient to provide catalytic activity. The presence of any CrF(3) and/or CrCl(3) phases on the activated chromia samples was not found.     

Hydrogen atom and hydride transfer in the reactions of chromium(IV) and chromium(V) complexes with rhodium hydrides. Crystal structure of a superoxorhodium(III) product

The aquachromyl ion, Cr(IV)aqO2+, reacts with the hydrides L(H2O)RhH2+ (L = L1 = [14]aneN4 and L2 = meso-Me6-[14]aneN4) in aqueous solutions in the presence of molecular oxygen to yield Cr(aq)3+ and the superoxo complexes L(H2O)RhOO2+. At 25 degrees C, the rate constants are approximately 10(4) M(-1) s(-1) (L = L1) and 1.12 x 10(3) M(-1) s(-1) (L = L2). Both reactions exhibit a moderate deuterium isotope effect, kRhH/kRhD = approximately 3 (L1) and 3.3 (L2), but no solvent isotope effect, kH2O/kD2O = 1. The proposed mechanism involves hydrogen atom abstraction followed by the capture of LRh(H2O)2+ with molecular oxygen. There is no evidence for the formation of L(H2O)Rh2+ in the reaction between L(H2O)RhH2+ and (salen)CrVO+. The proposed hydride transfer is supported by the magnitude of the rate constants (L = L1, k = 8,800 M(-1) s(-1); (NH3)4, 2,500; L2, 1,000) and isotope effects (L = L1, kie = 5.4; L2, 6.2). The superoxo complex [L1(CH3CN)RhOO](CF3SO3)2.H2O crystallizes with discrete anions, cations, and solvate water molecules in the lattice. All moieties are linked by a network of hydrogen bonds of nine different types. The complex crystallized in the triclinic space group P1 with a = 9.4257(5) A, b = 13.4119(7) A, c = 13.6140(7) A, alpha = 72.842(1)degrees, beta = 82.082(1) degrees, gamma = 75.414(1) degrees, V = 1587.69(14) A3, and Z = 2.     

Theoretical insights into the ferromagnetic coupling in oxalato-bridged chromium(III)-cobalt(II) and chromium(III)-manganese(II) dinuclear complexes with aromatic diimine ligands

Two novel heterobimetallic complexes of formula [Cr(bpy)(ox)(2)Co(Me(2)phen)(H(2)O)(2)][Cr(bpy)(ox)(2)]·4H(2)O (1) and [Cr(phen)(ox)(2)Mn(phen)(H(2)O)(2)][Cr(phen)(ox)(2)]·H(2)O (2) (bpy = 2,2'-bipyridine, phen = 1,10-phenanthroline, and Me(2)phen = 2,9-dimethyl-1,10-phenanthroline) have been obtained through the "complex-as-ligand/complex-as-metal" strategy by using Ph(4)P[CrL(ox)(2)]·H(2)O (L = bpy and phen) and [ML'(H(2)O)(4)](NO(3))(2) (M = Co and Mn; L' = phen and Me(2)phen) as precursors. The X-ray crystal structures of 1 and 2 consist of bis(oxalato)chromate(III) mononuclear anions, [Cr(III)L(ox)(2)](-), and oxalato-bridged chromium(III)-cobalt(II) and chromium(III)-manganese(II) dinuclear cations, [Cr(III)L(ox)(μ-ox)M(II)L'(H(2)O)(2)](+)[M = Co, L = bpy, and L' = Me(2)phen (1); M = Mn and L = L' = phen (2)]. These oxalato-bridged Cr(III)M(II) dinuclear cationic entities of 1 and 2 result from the coordination of a [Cr(III)L(ox)(2)](-) unit through one of its two oxalato groups toward a [M(II)L'(H(2)O)(2)](2+) moiety with either a trans- (M = Co) or a cis-diaqua (M = Mn) configuration. The two distinct Cr(III) ions in 1 and 2 adopt a similar trigonally compressed octahedral geometry, while the high-spin M(II) ions exhibit an axially (M = Co) or trigonally compressed (M = Mn) octahedral geometry in 1 and 2, respectively. Variable temperature (2.0-300 K) magnetic susceptibility and variable-field (0-5.0 T) magnetization measurements for 1 and 2 reveal the presence of weak intramolecular ferromagnetic interactions between the Cr(III) (S(Cr) = 3/2) ion and the high-spin Co(II) (S(Co) = 3/2) or Mn(II) (S(Mn) = 5/2) ions across the oxalato bridge within the Cr(III)M(II) dinuclear cationic entities (M = Co and Mn) [J = +2.2 (1) and +1.2 cm(-1) (2); H = -JS(Cr)·S(M)]. Density functional electronic structure calculations for 1 and 2 support the occurrence of S = 3 Cr(III)Co(II) and S = 4 Cr(III)Mn(II) ground spin states, respectively. A simple molecular orbital analysis of the electron exchange mechanism suggests a subtle competition between individual ferro- and antiferromagnetic contributions through the σ- and/or π-type pathways of the oxalato bridge, mainly involving the d(yz)(Cr)/d(xy)(M), d(xz)(Cr)/d(xy)(M), d(x(2)-y(2))(Cr)/d(xy)(M), d(yz)(Cr)/d(xz)(M), and d(xz)(Cr)/d(yz)(M) pairs of orthogonal magnetic orbitals and the d(x(2)-y(2))(Cr)/d(x(2)-y(2))(M), d(xz)(Cr)/d(xz)(M), and d(yz)(Cr)/d(yz)(M) pairs of nonorthogonal magnetic orbitals, which would be ultimately responsible for the relative magnitude of the overall ferromagnetic coupling in 1 and 2.     

Reduction of chromium in ethylene polymerisation using bis(imido)chromium(VI) catalyst precursors

Hybrid density functional calculations on [Cr(NR)2C3H7(C2H4)]+ (R = H, tBu) have revealed a facile reductive elimination reaction involving beta-hydrogen transfer from the alkyl chain, suggesting that the active species in ethylene polymerisation with bis(imido)chromium(VI) precursors contains a reduced chromium atom.     

FTIR, magnetic, 1H NMR spectral and thermal studies of some chelates of caproic acid: inhibitory effect on different kinds of bacteria

A convenient method for the preparation of complexes of the Cr3+, Mn2+, Fe3+, Co2+, Ni2+, Zn2+, ZrO2+, UO2(2+), Zr4+ and Th4+ ions with caproic acid (Hcap) is reported and this has enabled 10 complexes of caproate anion to be formulated: [Cr(cap)3].5H2O, [Mn(cap)2(H2O)2], [Fe(cap)3].12H2O, [Co(cap)2(H2O)2].4H2O, [Ni(cap)2(H2O)2].3H2O, [Zn(cap)2], [ZrO(cap)2].3H2O, [UO2(cap)(NO3)], [Zr(cap)2(Cl)2] and [Th(cap)4]. These new complexes were synthesized and characterized by elemental analysis, molar conductivity, magnetic measurements, spectral methods (mid infrared, 1H NMR and UV-vis spectra) and simultaneous thermal analysis (TG and DTG) techniques. It has been found from the elemental analysis as well as thermal studies that the caproate ligand behaves as bidentate ligand and forming chelates with 1:1 (metal:ligand) stoichiometry for UO2(2+), 1:2 for (Mn2+, Co2+, Ni2+, Zn2+, ZrO2+ and Zr4+), 1:3 stoichiometry for (Cr3+ and Fe3+) and 1:4 for Th4+ caproate complexes, respectively, as bidentate chelating. The molar conductance measurements proved that the caproate complexes are non-electrolytes. The kinetic thermodynamic parameters such as: E*, DeltaH*, DeltaS* and DeltaG* are estimated from the DTG curves. The antibacterial activity of the caproic acid and their complexes was evaluated against some gram positive/negative bacteria.     

Speciation of chromium by in-capillary reaction and capillary electrophoresis with chemiluminescence detection

A sensitive method for the simultaneous determination of chromium(III) (Cr3+) and chromium(VI) (CrO4(2-)) using in-capillary reaction, capillary electrophoresis (CE) separation and chemiluminescence (CL) detection was developed. The chemiluminescence reaction was based on luminol oxidation by hydrogen peroxide in basic aqueous solution catalyzed by Cr3+ ion followed by capillary electrophoresis separation. Based on in-capillary reduction, chromium(VI) can be reduced by acidic sodium hydrogensulfite to form chromium(III) while the sample is running through the capillary. Before the electrophoresis procedure, the sample (Cr3+ and CrO4(2-)), buffer and acidic sodium hydrogensulfite solution segments were injected in that order into the capillary, followed by application of an appropriate running voltage between both ends. As both chromium species have opposite charges, Cr3+ ions migrate to the cathode, while CrO4(2-) ions, moving in the opposite direction toward the anode, react with acidic sodium hydrogensulfite which results in the formation of Cr3+ ions. Because of the migration time difference of both Cr3+ ions, Cr(III) and Cr(VI) could be separated. The running buffer was composed of 0.02 mol l(-1) acetate buffer (pH 4.7) with 1 x 10(-3) mol l(-1) EDTA. Parameters affecting CE-CL separation and detection, such as reductant (sodium hydrogensulfite) concentration, mixing mode of the analytes with CL reagent, CL reaction reagent pH and concentration, were optimized. The limits of detection (LODs) of Cr(III) and Cr(VI) were 6 x 10(-13) and 8 x 10(-12) mol l(-1) (S/N=3), respectively. The mass LODs for Cr(III) and Cr(VI) were 1.2 x 10(-20) mol (12 zmol) and 3.8 x 10(-19) mol (380 zmol), respectively.     

Mechanistic studies of olefin and alkyne trimerization with chromium catalysts: deuterium labeling and studies of regiochemistry using a model chromacyclopentane complex

A system for catalytic trimerization of ethylene utilizing chromium(III) precursors supported by diphosphine ligand PNP(O4) = (o-MeO-C6H4)2PN(Me)P(o-MeO-C6H4)2 has been investigated. The mechanism of the olefin trimerization reaction was examined using deuterium labeling and studies of reactions with alpha-olefins and internal olefins. A well-defined chromium precursor utilized in this studies is Cr(PNP(O4))(o,o'-biphenyldiyl)Br. A cationic species, obtained by halide abstraction with NaB[C6H3(CF3)2]4, is required for catalytic turnover to generate 1-hexene from ethylene. The initiation byproduct is vinylbiphenyl; this is formed even without activation by halide abstraction. Trimerization of 2-butyne is accomplished by the same cationic system but not by the neutral species. Catalytic trimerization, with various (PNP(O4))Cr precursors, of a 1:1 mixture of C2D4 and C2H4 gives isotopologs of 1-hexene without H/D scrambling (C6D12, C6D8H4, C6D4H8, and C6H12 in a 1:3:3:1 ratio). The lack of crossover supports a mechanism involving metallacyclic intermediates. Using a SHOP catalyst to perform the oligomerization of a 1:1 mixture of C2D4 and C2H4 leads to the generation of a broader distribution of 1-hexene isotopologs, consistent with a Cossee-type mechanism for 1-hexene formation. The ethylene trimerization reaction was further studied by the reaction of trans-, cis-, and gem-ethylene-d2 upon activation of Cr(PNP(O4))(o,o'-biphenyldiyl)Br with NaB[C6H3(CF3)2]4. The trimerization of cis- and trans-ethylene-d2 generates 1-hexene isotopomers having terminal CDH groups, with an isotope effect of 3.1(1) and 4.1(1), respectively. These results are consistent with reductive elimination of 1-hexene from a putative Cr(H)[(CH2)4CH=CH2] occurring much faster than a hydride 2,1-insertion or with concerted 1-hexene formation from a chromacycloheptane via a 3,7-H shift. The trimerization of gem-ethylene-d2 has an isotope effect of 1.3(1), consistent with irreversible formation of a chromacycloheptane intermediate on route to 1-hexene formation. Reactions of olefins with a model of a chromacyclopentane were investigated starting from Cr(PNP(O4))(o,o'-biphenyldiyl)Br. alpha-Olefins react with cationic biphenyldiyl chromium species to generate products from 1,2-insertion. A study of the reaction of 2-butenes indicated that beta-H elimination occurs preferentially from the ring CH rather than exo-CH bond in the metallacycloheptane intermediates. A study of cotrimerization of ethylene with propylene correlates with these findings of regioselectivity. Competition experiments with mixtures of two olefins indicate that the relative insertion rates generally decrease with increasing size of the olefins.     

Acid-catalyzed oxidation of iodide ions by superoxo complexes of rhodium and chromium

Superoxometal complexes L(H(2)O)MOO(2+) (L = (H(2)O)(4), (NH(3))(4), or N(4)-macrocycle; M = Cr(III), Rh(III)) react with iodide ions according to the stoichiometry L(H(2)O)MOO(2+) + 3I(-) + 3H(+) --> L(H(2)O)MOH(2+) + 1.5I(2) + H(2)O. The rate law is -d[L(H(2)O)MOO(2+)]/dt = k [L(H(2)O)MOO(2+)][I(-)][H(+)], where k = 93.7 M(-2) s(-1) for Cr(aq)OO(2+), 402 for ([14]aneN(4))(H(2)O)CrOO(2+), and 888 for (NH(3))(4)(H(2)O)RhOO(2+) in acidic aqueous solutions at 25 degrees C and 0.50 M ionic strength. The Cr(aq)OO(2+)/I(-) reaction exhibits an inverse solvent kinetic isotope effect, k(H)()2(O)/k(D)2(O) = 0.5. In the proposed mechanism, the protonation of the superoxo complex precedes the reaction with iodide. The related Cr(aq)OOH(2+)/I(-) reaction has k(H)2(O)/k(D)2(O) = 0.6. The oxidation of (NH(3))(5)Rupy(2+) by Cr(aq)OO(2+) exhibits an [H(+)]-dependent pathway, rate = (7.0 x 10(4) + 1.78 x 10(5)[H(+)])[Ru(NH(3))(5)py(2+)][Cr(aq)OO(2+)]. Diiodine radical anions, I(2)(*)(-), reduce Cr(aq)OO(2+) with a rate constant k = 1.7 x 10(9) M(-1) s(-1).     

Polynuclear chromium(III) carboxylates. 1. Synthesis,structure, and magnetic properties of an octanuclear complex with a ring structure

A novel cyclic octanuclear chromium(III) complex with hydroxo and acetato bridging ligands was isolated and its structure determined by X-ray crystallography. The complex [Cr8(OH)12(OAc)12] (1) (OAc- = CH3CO2-), as found in crystals of 1.34H2O, is obtained by refluxing an aqueous solution of the trinuclear "basic" chromium acetate. 1.34H2O crystallizes in the tetragonal space group I42d with the following unit cell dimensions: a = 16.592(2) A, c = 31.557(4) A, V = 8687(1) A3, and Z = 2. A total of 2000 unique data with I > 3 sigma (I) were used to solve and refine the structure to R(Fo) = 0.066 and Rw(Fo) = 0.085. The structure consists of eight Cr(III) ions that form a ring structure and are bridged by hydroxo and acetato ligands. Each of the two neighboring metal atoms in 1 is bridged either by two OH- ligands and one OAc- ligand, with a Cr...Cr distance of 2.949(2) A, or by two OAc- ligands and one OH- ligand, with a Cr...Cr distance of 3.383(2) A in an alternating fashion. The complex resides on a crystallographic 4 center, and the overall symmetry of 1 is S4. The magnetic susceptibility of 1.34H2O was measured in the temperature range of 5-240 K. Our theoretical modeling of the susceptibility data indicates alternating antiferromagnetic exchange interactions between adjacent spin 3/2 Cr3+ ions around the ring, of magnitude J/kB = 13.7 and 8.9 K, respectively.     

Kinetics and mechanism of oxidation of chromium(III)-l-arginine complex by periodate

Oxidation of the chromium(III)-l-arginine complex [CrIII(L)2(H2O)2]+ by periodate has been investigated. In aqueous solutions, [CrIII(L)2(H2O)2]+ is oxidized by IO−4 according to the rate law: d[CrVI]/dt=k2K5[CrIII]T [IVII]T/1 +([H+]/K1)+K5[IVII]T where k2 is the rate constant for the electron transfer process, K1 the equilibrium constant for the dissociation of [CrIII(L)2- (H2O)2]+ to [CrIII(L)2(H2O)(OH)]+H+, and K5 the pre-equilibrium formation constant. Values of k2= 4.02×10−3s−1, K1=5.60×10−4m and K5=171m−1 were obtained at 30°C and I=0.2m. Thermodynamic activation parameters were calculated. It is proposed that electron transfer proceeds through an inner-sphere mechanism via coordination of IO−4 to chromium(III). This revised version was published online in June 2006 with corrections to the Cover Date.     

Kinetics of anation of chromium(III) by L-phenylalanine

Summary The kinetics of anation of chromium(III) species, [Cr(H₂O)₆]⁴⁺ and [Cr(H₂O)₅OH]²⁺, by L-phenylalanine in aqueous acid has been studied spectrophotometrically. Effects of varying [substrate], [ligand], [H⁺], , % ethanol and temperature were investigated. The kinetic data suggest a mechanism where outersphere-associations [between chromium(III) species and phenylalanine in the zwitterionic form] precede anation. Comparison of the results with published data suggest an I_a path for the [Cr(H₂O)₆]³⁺ reaction and I_d path for the [Cr(H₂O)₅OH]²⁺ reaction.