Polymer-templated organosilicas with hexagonally ordered mesopores: the effect of organosilane addition at different synthesis stages

Two series of ordered mesoporous organosilica (OMO) SBA-15 materials with surface and bridging groups were fabricated by varying the organic precursor addition at different synthesis stages. The consequence of the delayed introduction of organic precursor on the structural and adsorption properties of the resulting OMOs was investigated. The OMOs studied were synthesized via co-condensation of tetraethyl orthosilicate (TEOS) and ureidopropyltrimethoxysilane (UPS) as well as TEOS and bis(triethoxysilylpropyl) disulfide (BTDS) in the presence of poly(ethylene oxide)-poly(propylene oxide)- poly(ethylene oxide) triblock copolymer Pluronic P123 (EO₂₀PO₇₀EO₂₀). The aforementioned OMOs were characterized by nitrogen adsorption-desorption isotherms at −196 °C and powder X-ray diffraction (XRD). Nitrogen adsorption isotherms were used to estimate the pore volume, mesopore diameter and the BET specific surface area, whereas the XRD data provided information about structural ordering and unit cell of the samples studied. Ryan Felix, undergraduate student from Oberlin College (Oberlin, OH, USA) participating in the NSF-REU program during Summer 2006.     

Synthesis, structure and adsorption properties of nanoporous SBA-15 materials with framework and surface functionalities

Highly ordered SBA-15 nanoporous silica containing ethylene, phenylene bridges or/and amine, thiol, vinyl and phenyl surface groups were synthesized by using amphiphilic block copolymer as the structure-directing agent. The XRD data shows high degree of the order of the final structures. Obtained materials have well-developed porous structure—values of specific surface area are in the range 700–1050 m²/g and the sizes of cylindrical mesopores are in the range 6.5–9.5 nm. It was determined that size of the mesopores strongly depends even on small amounts of co-monomers co-condensing with TEOS. A new technique to introduce some amount of pendant amine groups by co-condensation of proper monomers has been proposed. Tetragonal structure was obtained when small amount of vinyl groups was introduced to the system. A new approach of determining pore size based only on the XRD measurements was compared with KJS method, confirming full usefulness of the former for calculation of the size of mesopores in SBA-15 materials. Dedicated to Professor Mietek Jaroniec on the occasion of his 60th birthday.     

Adsorption Studies of Radionuclides and Toxic Metal Ions on a Modified Mesoporous Lanthanum(III) Silicate

A new adsorbent, modified mesoporous lanthanum(III) silicate, has been prepared with various molar ratios of Si/La (10, 20, 40, 80) and cethyltrimethylammonium bromide (CTAB) as structure directing agent. XRD, nitrogen sorption, SEM, IR, thermogravimetry and sorption of radionuclides and toxic metal ions have been studied. The results show that adsorption amount of some element such as Pb(II) and Th(IV) has been increased significantly by incorporation of lanthanum ions in the framework of adsorbent. Separation of Co(II)‐Th(IV), Co(II)‐U(VI) and Mo(VI)‐U(VI) has been developed on columns of this adsorbent.     

中空介孔二氧化硅锚固聚偕胺肟吸附Cr(Ⅵ)

以硝酸铈铵为引发剂, 在自制的中空介孔二氧化硅(HMS)的空腔和通道内引发丙烯腈自由基聚合, 并将其氰基偕胺肟化, 用于制备具有吸附Cr(Ⅵ)的廉价有机无机复合吸附材料—中空介孔二氧化硅锚固聚偕胺肟. 通过傅里叶变换红外光谱(FTIR)、 扫描电子显微镜(SEM)及N₂吸附-脱附比表面分析对中空介孔二氧化硅锚固聚偕胺肟进行表征. 结果表明, 制备的中空微球直径约为400 nm, 其壁上孔径约为11.0 nm, 比表面积约为431 m²/g, 锚固聚偕胺肟后中空微球壁上孔道直径约为4.6 nm, 比表面积降低为347 m²/g. HMS锚固的聚偕胺肟对重铬酸钾溶液中铬的吸附量高达0.46 mmol/g, 吸附过程中伴随化学反应, 符合伪二级动力学模型, 可用作废水处理中重金属离子的高效廉价吸附材料.     

Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

CO在Sm/Rh(100)模型表面上的吸附与反应

应用AES,LEED,XPS和TDS研究了Rh(100)上Sm膜和Sm/Rh表面合金以及CO在这两类模型表面的吸附与反应.室温下Sm在Rh(100)上的生长遵从SK模式,Sm膜经900K高温退火后可形成有序表面合金.在室温制备的Sm膜/Rh(100)表面上,室温下CO在Sm上的吸附改变了表面结构,生成SmOx和表面碳.随着Sm覆盖度的增加,低温脱附峰(α-CO)面积迅速下降,且峰温向高温方向位移;表明Sm的空间位阻和电子效应同时起作用.在Sm/Rh合金表面上,CO在约590K出现新的脱附峰,可归属为受Sm电正性修饰的Rh原子上的CO脱附峰     

Synthesis and structural characterization of ferrocene-based bis(pyrazol-1-yl)borate ligands: FcB(Me)pz2K, Fc2Bpz2K, and 1,1′-fc[B(Me)pz2]2K2 (Fc: ferrocenyl, fc: ferrocenylene, pz: pyrazolyl)

Reaction of the ferrocenyl(dimethylamino)boranes FcB(Me)NMe₂, Fc₂BNMe₂, and 1,1′-fc[B(Me)NMe₂]₂ with 1:1 mixtures of pyrazole and potassium pyrazolide in refluxing THF gave the potassium salts of the ferrocene-based bis(pyrazol-1-yl)borate ligands FcB(Me)pz₂K, Fc₂Bpz₂K, and 1,1′-fc[B(Me)pz₂]₂K₂ in good yield (Fc: ferrocenyl, fc: ferrocenylene, pz: pyrazolyl). In the solid state, FcB(Me)pz₂K and Fc₂Bpz₂K form centrosymmetric dimers with short K?Cp contacts suggesting an η⁵ coordination mode of the potassium ion. The crystal lattice of the ditopic ligand 1,1′-fc[B(Me)pz₂]₂K₂ consists of coordination polymer strands featuring essentially the same structural motif that has been observed for the monotopic derivatives. All three scorpionate ligands are thus promising building blocks for the preparation of ferrocene-containing multiple-decker sandwich complexes.     

周期性密度泛函理论研究氯气在CuCl(111)表面上的吸附与解离

运用广义梯度密度泛函理论(Generalized Gradient Approximation，GGA)的PBE(Perdew-Burke-Ernzerh)方法结合周期性平板模型，研究了氯气分子和氯原子在CuCl(111)表面上的吸附。通过对不同吸附位和不同单层覆盖度下的吸附能和几何构型参数的计算和比较发现：氯气分子在CuCl(111)表面的吸附为解离吸附；单层覆盖度为0.50时的吸附构型为稳定的吸附构型；氯气分子平行吸附在CuCl(111)表面时最稳定，吸附能最大，达364.5 kJ·mol^-1；伸缩振动频率的计算结果表明，吸附后的氯气分子的伸缩振动频率与自由氯气分子的伸缩振动频率相比，都发生了红移；布居分析结果表明整个吸附体系发生了由Cu原子向氯气分子的电荷转移。氯原子吸附的计算结果显示氯原子以穴位稳定的吸附在CuCl(111)表面。     

Adsorption of aqueous Hg (II) by a novel poly(aniline‐co‐o‐aminophenol)/mesoporous silica SBA‐15 composite

A novel poly(aniline‐co‐o‐aminophenol) (PAOA)/mesoporous silica SBA‐15 nanocomposite was synthesized and investigated for adsorption of Hg (II) from aqueous solutions of wide pH range. A chemical oxidation method was employed for polymerization of aniline and o‐aminophenol on an ordered SBA‐15 template to obtain a significantly enlarged BET surface area of the adsorbent. Efficiency study revealed that the PAOA/SBA‐15 could reach a maximum Hg (II) adsorption capacity of over 400 mg/g. Kinetic study showed that the Hg (II) adsorption by the PAOA/SBA‐15 fitted a pseudo‐second‐order kinetic model, indicating that the mercury adsorption process was predominantly controlled by chemical process. The results of this study also proved that the adsorbed Hg (II) could be effectively desorbed from the PAOA/SBA‐15 in 0.1M HCl and 5% sulfocarbonide solutions. Associated adsorption mechanism was also investigated by means of Fourier transform infrared (FTIR) and X‐ray photoelectron spectroscopy (XPS) techniques. Copyright © 2010 John Wiley & Sons, Ltd.     

氮在含氧Mo(100)面上的吸附与反应

 用HREELS, AES, LEED和TDS考察了氮在含氧Mo(100)上的吸附和热脱附. 120 K下氮在含氧Mo(100)上吸附时存在着N—N伸缩振动频率2150和1600 cm-1, 分别对应于线式(γ态)和侧位(α态)两种分子吸附态. 升温引起γ态氮的脱附和α态氮的解离. 其中γ态氮的脱附峰温位于155 K, 遵循一级脱附动力学; 由α态解离生成的N原子占据Mo(100)的四重空位(即β态), 并在高于1?150 K的温度重新化合形成氮而脱附. 120 K时,氮的吸附是无序的; 吸附了氮的表面经1100 K退火后生成了有序的c(2×2)-N表面结构.