Generation of Nonlinear Waves on a Viscoelastic Coating in a Turbulent Boundary Layer

Self–induced excitation of periodic nonlinear waves on a viscoelastic coating interacting with a turbulent boundary layer of an incompressible flow is studied. The response of the flow to multiwave excitation of the coating surface is determined in the approximation of small slopes. A system of equations is obtained for complex amplitudes of multiple harmonics of a slow (divergent) wave resulting from the development of hydroelastic instability on a coating with large losses. It is shown that three–wave resonant relations between the harmonics lead to the development of explosive instability, which is stabilized due to the deformation of the mean (Sover the wave period) shear flow in the boundary layer. Conditions of soft and hard excitation of divergent waves are determined. Based on the calculations performed, qualitative features of excitation of divergent waves in known experiments are explained.     

Interaction between longitudinal vortices and flat plate boundary layer

The interaction between longitudinal vortices and flat plate boundary layer has been studied numerically for both laminar and turbulent flow situations. The vortices are assumed to be placed in an otherwise two-dimensional boundary layer flow. The flow is assumed to be incompressible and steady. Considering the fact that the velocity, vorticity and temperature gradients in the transverse directions are much larger than the longitudinal (streamwise) gradients for these flows, the original Navier Stokes equations are parabolized in the streamwise direction. A simple model, based on Boussinesq hypothesis, is used for turbulent flow. The discretized equations are then solved step by step in the streamwise direction, using an iterative procedure at each station. Numerical solutions have been obtained for different parameters, such as the Reynolds number, the circulation and the initial position of the vortices. The computed flow patterns and the skin friction coefficient and Stanton number are found to be qualitatively consistent with available experimental results. It is shown that the interaction between the vortices and the boundary layer may severely disturb the boundary layer flow field and thus considerably increase the local skin friction and heat transfer rate on surface of an aircraft.     

Recovery factors for a permeable surface and a gas surface film in a supersonic turbulent boundary layer

The recovery factor on a permeable surface has been experimentally determined at various rates of injection of air into a supersonic turbulent boundary layer. On the basis of an analysis of the solutions of the integral momentum and energy equations for a turbulent boundary layer an expression is obtained for the recovery factor. The recovery factor in the region of a protective gas surface film in a supersonic external flow has been experimentally determined.Moscow. Translated from Izvestiya Akademii Nauk SSSR. Mekhanika Zhidkosti i Gaza, No. 2, pp. 131–136, March–April, 1972.     

Numerical prediction of turbulent boundary layer noise from a sharp-edged flat plate

An efficient hybrid uncorrelated wall plane waves–boundary element method (UWPW-BEM) technique is proposed to predict the flow-induced noise from a structure in low Mach number turbulent flow. Reynolds-averaged Navier-Stokes equations are used to estimate the turbulent boundary layer parameters such as convective velocity, boundary layer thickness, and wall shear stress over the surface of the structure. The spectrum of the wall pressure fluctuations is evaluated from the turbulent boundary layer parameters and by using semi-empirical models from literature. The wall pressure field underneath the turbulent boundary layer is synthesized by realizations of uncorrelated wall plane waves (UWPW). An acoustic BEM solver is then employed to compute the acoustic pressure scattered by the structure from the synthesized wall pressure field. Finally, the acoustic response of the structure in turbulent flow is obtained as an ensemble average of the acoustic pressures due to all realizations of uncorrelated plane waves. To demonstrate the hybrid UWPW-BEM approach, the self-noise generated by a flat plate in turbulent flow with Reynolds number based on chord Re_c = 4.9 × 10⁵ is predicted. The results are compared with those obtained from a large eddy simulation (LES)-BEM technique as well as with experimental data from literature.     

壁面加热湍流相干结构的子波分析实验研究

通过在平板湍流边界层沿流向固壁表面平行放置若干条通电加热的金属细丝,在平板表面形成沿展向周期性分布的温度场,利用该温度场引起的空气热对流,在湍流边界层近壁区域产生一组沿湍流边界层展向周期分布的大尺度流向涡结构,改变了平板湍流边界层中不同尺度结构及其能量分布。采用对壁湍流多尺度结构的子波分析表明,在湍流边界层近壁区域产生规则的流向涡结构将壁湍流各种尺度湍涡结构不规则的脉动有序地组织起来,抑制了壁湍流各种尺度湍涡结构脉动,特别抑制了能量最大尺度湍涡结构的脉动,减小由于湍流脉动引起的在湍流边界层法向和展向的动量和能量损耗,从而减小了湍流的阻力。     

Permissible Height of the Surface Roughness in a Turbulent Boundary Layer with a Streamwise Pressure Gradient

The results of an experimental investigation of the effect of the streamwise pressure gradient in a turbulent boundary layer on the permissible height of the surface roughness of bodies in an incompressible fluid flow are presented. The permissible roughness Reynolds number for which the characteristics of the turbulent boundary layer remain the same as in the case of flow past a smooth surface is determined.     

The turbulent boundary layer on the moving surface of a cylindrical body

A study is made of the problem of a two-dimensional turbulent boundary layer on the moving surface of a cylindrical body (a Rankine oval with a relative elongation of four) moving at constant velocity in an incompressible fluid. For the numerical simulation of the turbulent flow of the fluid, the boundary layer is divided into exterior and interior regions in accordance with a two-layer model, using different expressions for the coefficients of turbulent transfer for each region. A study was nade of the development of the boundary layer on the body at different speeds of the body surface and different Reynolds numbers. The following integral characteristics were found by numerical calculation: the work of friction as the body is displaced; the work expended on the movement of its surface; and, for a flow regime with separation, the work of the pressure force. In this case the following model of separation flow is assumed: beyond the singular point in the solution of the boundary layer equations that indicates the appearance of a region of reverse flow, the pressure and friction stress on the wall are constant and are determined by their values at the singular point.Translated from Izvestiya Akademii Nauk SSSH, Mekhanika Zhidkosti i Gaza, No. 5, pp. 61–67, September–October, 1984.Finally, the author would like to thank G. G. Chernyi and Yu. D. Shevelev for useful discussions and for their interest in this work.     

Energy-balance equation for turbulent pulsations in the theory of the free turbulent boundary layer

Semiempirical expressions are proposed for the coefficient of turbulent viscosity and for the scale of turbulence in the equations for the free turbulent boundary layer in an incompressible fluid, these equations consisting of the equation of continuity, the equations of motion, and the equation for the average energy balance in the turbulent pulsations. The advantage of the expressions over the existing ones is that the two empirical constants in the equations have nearly the same values for circular and plane turbulent streams and also for a turbulent boundary layer at the edge of a semiinfinite homogeneous flow with a stationary fluid. The mean-energy distribution and the mean energy of the turbulent pulsations computed in this paper agree well with the experimental values.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 75–79, November–December, 1970.     

Diffusion and Electrical Processes in the Turbulent Boundary Layer and in the Neighborhood of the Stagnation Point

The problem of electric current (engine current) formation in aircraft jet engine ducts as a result of the development of electrical diffusion boundary layers on the surfaces of the duct and internal engine components is investigated. It is assumed that the outer flow containing electrons and positive ions is quasi-neutral and that the electrical quasi-neutrality is violated (and the electric engine current develops) in the wall flow zone as a result of the difference between the electron and ion diffusion coefficients. The problem of the development of an electrical diffusion boundary layer inside the turbulent gasdynamic boundary layer on a plane surface is formulated and solved. The engine current distribution along the duct is found for various values of a turbulent viscosity on the boundary of the gasdynamic boundary layer which affect the laminar-turbulent transition point.The electrical diffusion processes that occurs when an electrically quasi-neutral hydrodynamic stream impinges on a plane surface (simulation of the flow in the neighborhood of a stagnation point) is studied. In this case the Navier-Stokes equations have a self-similar solution. It is shown that the system of electrohydrodynamic equations also has a self-similar solution. The electrical parameter fields are determined and the engine current is found on the basis of this solution.     

FLOW STRUCTURE IN THE TURBULENT BOUNDARY LAYER OVER DIRECTIONAL RIBLETS SURFACES

本文采用时间解析的二维粒子图像测速技术,对零压力梯度光滑以及汇聚和发散沟槽表面平板湍流边界层统计特性和流动结构进行了研究.结果表明在垂直于汇聚和发散沟槽表面的对称平面内,相对于光滑壁面,发散沟槽壁面使当地边界层厚度、壁面摩擦阻力、湍流脉动、雷诺应力等明显减小;而汇聚沟槽壁面对湍流边界层特性和流动结构的影响正好相反,汇聚沟槽使壁面流体有远离壁面向上运动的趋势,因而导致边界层厚度增加了约43%;同时,在汇聚沟槽表面情况下流向大尺度相干结构更容易形成,这对减阻是不利的.此外,顺向涡数量在湍流边界层的对数区均存在一个极大值,发散沟槽表面所对应的极大值位置更靠近沟槽壁面,而在汇聚沟槽表面则有远离壁面的趋势,由顺向涡诱导产生的较强的喷射和扫掠运动会在湍流边界层中产生较强的剪切作用,顺向涡数量的减少是发散沟槽壁面当地摩擦阻力降低的主要原因.     

金属丝壁面加热湍流标度律的实验研究

通过在固壁表面的平板湍流边界层沿流向平行放置若干通电加热的金属细丝,在平板表面形成沿展向周期性分布的温度场,利用该温度场引起的空气热对流,在湍流边界层近壁区域产生一组沿湍流边界层展向周期分布的流向涡结构。对壁湍流小尺度结构标度律统计特性的研究表明,金属丝加热后形成的规则流向涡结构将壁湍流各种尺度湍涡结构不规则的脉动有序地组织起来,增强了湍流小尺度结构的层次结构相似性,减小了壁湍流中小尺度结构的间歇性和奇异性,抑制了壁湍流中奇异的湍涡结构。     

A quasi-similarity analysis of the turbulent boundary layer on a flat plate

The partial differential equation of the boundary layer on a flat plate are simplified by using the universal variables for turbulent flow. For laminar flow this gives boundary layer having a finite thickness and a friction coefficient differing by a few percent from the Blasius value. For a turbulent flow a differential equation for the velocity distribution is obtained with a parameter which varies slowly with the streamwise coordinate. The numerical value of this parameter is determined as an eigenvalue of the differential equations giving a velocity profile which evolves as the boundary layer thickens. Numerical calculations using a simple eddy viscosity model gave results in very good agreement with experiment.     

A coupled boundary element–finite difference model of surface wave motion over a wall turbulent flow

An effective numerical technique is presented to model turbulent motion of a standing surface wave in a tank. The equations of motion for turbulent boundary layers at the solid surfaces are coupled with the potential flow in the bulk of the fluid, and a mixed BEM–finite difference technique is used to model the wave motion and the corresponding boundary layer flow. A mixing‐length theory is used for turbulence modelling. The model results are in good agreement with previous physical and numerical experiments. Although the technique is presented for a standing surface wave, it can be easily applied to other free surface problems. Copyright © 2005 John Wiley & Sons, Ltd.     

考虑法向压力梯度的三维旋转边界层计算

本文以量级分析为基础,建立了一般曲线坐标系上的三维旋转边界层方程。对旋转在边界层中的影响进行分析之后,提出了一个能够处理壁面法向压力梯度不为零问题的压力梯度迭代方法。在传统的Box法的基础上发展了一套完整的求解三维旋转边界层的方法和程序,并对螺旋面、压气机转子叶面以及圆柱面上的旋转边界层进行了计算,与他人的计算和实验的对比分析表明,该方法和程序是正确的,可用于求解任意几何物面上的三维旋转边界层。     

Localized Coherent Structures in the Boundary Layer

A Blasius laminar boundary layer and a steady turbulent boundary layer on a flat plate in an incompressible fluid are considered. The spectral characteristics of the Tollmien—Schlichting (TS) and Squire waves are numerically determined in a wide range of Reynolds numbers. Based on the spectral characteristics, relations determining the three–wave resonance of TS waves are studied. It is shown that the three–wave resonance is responsible for the appearance of a continuous low–frequency spectrum in the laminar region of the boundary layer. The spectral characteristics allow one to obtain quantities that enter the equations of dynamics of localized perturbations. By analogy with the laminar boundary layer, the three–wave resonance of TS waves in a turbulent boundary layer is considered.     

Application of the Reichardt model in problems of turbulence near the wall

A method is proposed for calculating turbulent boundary layers near the wall, based on the Reichardt semiempirical model of turbulent mixing. The article considers the problem of the turbulent boundary layer of a plate, including the case of supersonic flow around a plate, as well as the problem of the turbulent boundary layer with the nonisothermal flow of turbulent jets around a surface. Here there are introduced several almost self-similar solutions of the differential transfer equations, based on the assumption of the conservative nature of the profiles of the parameters with respect to a change in the sublayer. The results of the calculation are compared with experimental data.Moscow. Translated from Izvestiya Akademii Nauk SSSR. Mekhanika Zhidkosti i Gaza, No. 2, pp. 15–24, March–April, 1972.     

The three-dimensional boundary layer on a rotating flat plate as influenced by the containing end-walls

Growth of the turbulent boundary layer over a flat plate rotating about an axis parallel to the leading edge is considered in which the axial length (or span) is contained between rotating radial end-plates (the hub and shroud, in effect, of a centrifugal impeller). The problem of the influence of the cross-flows in the boundary layers on the end-plates as they affect the blade boundary layer is considered. The latter is treated as a three-dimensional problem and the dependence of the solution on the boundary conditions is discussed. The integral equations of this boundary layer reduce to a pair of quasi-linear partial differential equations which are weakly elliptic, parabolic, or weakly hyperbolic according to the rotation number. When the equations are exactly parabolic and the boundary layers remain thin it is shown that the end-plate boundary layers can have no influence upon the blade boundary layer if the flow is initially radial; separation of the end-plate cross flows takes place in the corners.     

Turbulent boundary layer on a catalytic surface in a nonequilibrium dissociating gas

The majority of the studies which consider the flow of a dissociating gas in a turbulent boundary layer are devoted to the investigation of either frozen or equilibrium flows on a flat plate.The frozen turbulent boundary layer has been studied by Dorrance [1], Kutateladze and Leont'ev [2], and Lapin and Sergeev [3]. A study of the effect of catalytic recombination processes at the plate surface on the heat transfer in a frozen turbulent boundary layer was made by Lapin [4].Kosterin and Koshmarov [5], Ginzburg [6], Dorrance [7], and Lapin [8] have studied the turbulent boundary layer on a plate in equilibrium dissociating gas.The calculation of the heat transfer in a turbulent boundary layer on a catalytic plate surface with nonequilibrium dissociation was made by Kulgein [9]. In this study the nonequilibrium nature of the dissociation process was taken into account only in the laminar sublayer, while the flow in the turbulent core was considered frozen. The solution was found numerically using a computer by means of a laborious iteration process.The present paper reports a method for calculating the turbulent boundary layer on a flat catalytic plate with arbitrary dissociation rate. The method, constructed using the assumptions customary for turbulent boundary layer theory, is a successive approximation method. Good convergence of the method is assured by the fact that the effect of the nonequilibrium nature of the dissociation process on the parameter distribution in the boundary layer and, consequently, on the friction and heat transfer may be allowed for merely by finding corrections, usually relatively small, to the distribution of these parameters in the equilibrium or frozen flows. The basis of the study is the two-layer scheme of the turbulent boundary layer. The Prandtl and Schmidt numbers and also their turbulent analogs are taken equal to unity. As the model of the dissociating gas we use the Lighthill model of the ideal dissociating gas [10], extended by Freeman [11] to nonequilibrium flows.     

Temporal development of turbulent boundary layers with embedded streamwise vortices

The interaction of streamwise vortices with turbulent boundary layer has been investigated using large-eddy simulation. The initial conditions are a pair of counterrotating Oseen vortices with flow between them directed toward the wall (common-flow-down), superimposed on various instantaneous realizations of a turbulent boundary layer. The time development of the vortices and their interaction with the boundary layer are studied by integrating the filtered Navier-Stokes equations in time. The most important effects of the vortices on the boundary layer are the thinning of the boundary layer between vortices (downwash region) and the thickening of the boundary layer in the upwash region. The vortices first move toward the wall as a result of the self-induced velocity, and then apart from each other because of the image vortices due to the solid wall. The Reynolds stress profiles highlight the highly three-dimensional structure of the turbulent boundary layer modified by the vortices. The presence of significant turbulent activity near the vortex center and in the upwash region suggests that localized instability mechanisms in addition to the convection of turbulent energy by the secondary flow are responsible for this effect. High levels of turbulent kinetic energy and secondary stresses in the vicinity of the vortex center are also observed. The numerical results show good agreement with experimental results.This work was supported by the Office of Naval Research under Grant N00014-89-J-1638. Computer time was supplied by the San Diego Supercomputing Center.     

Three-dimensional turbulent boundary layer on a body of complex shape

Flow and heat transfer problems associated with three-dimensional compressible gas flow past a body of complex shape at a small angle of attack are investigated on the basis of a finite-difference calculation. The results of a numerical solution of the equations of the three-dimensional turbulent boundary layer are presented. The effect of the leading parameters on three-dimensional flow development and heat transfer is analyzed. The characteristic flow regions in the boundary layer are found: lines of divergence and convergence on the surface, separation zones and flow interfaces. The location of the maximum values of the heat flux and friction on the surface is determined, the behavior of the limiting streamlines on the body is described, and the intensity of the secondary flows in the boundary layer is estimated.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 25–35, September–October, 1986.