Recent advances in metal‐organic frameworks and covalent organic frameworks for sample preparation and chromatographic analysis

In the field of analytical chemistry, sample preparation and chromatographic separation are two core procedures. The means by which to improve the sensitivity, selectivity and detection limit of a method have become a topic of great interest. Recently, porous organic frameworks, such as metal‐organic frameworks (MOFs) and covalent organic frameworks (COFs), have been widely used in this research area because of their special features, and different methods have been developed. This review summarizes the applications of MOFs and COFs in sample preparation and chromatographic stationary phases. The MOF‐ or COF‐based solid‐phase extraction (SPE), solid‐phase microextraction (SPME), gas chromatography (GC), high‐performance liquid chromatography (HPLC) and capillary electrochromatography (CEC) methods are described. The excellent properties of MOFs and COFs have resulted in intense interest in exploring their performance and mechanisms for sample preparation and chromatographic separation.     

Molecularly imprinted polymer coating on metal‐organic frameworks for solid‐phase extraction of fluoroquinolones from water

In this work, a novel surface molecularly imprinted polymer with high adsorption capacity, high adsorption rate, and high selectivity for fluoroquinolones was prepared on the surface of UiO‐66‐NH₂, which is a kind of metal‐organic framework. The surface morphology and adsorption properties of this molecularly imprinted polymer were investigated. The maximum adsorption capacity was 99.19 mg/g, and adsorption equilibrium was achieved within 65 s. Combined with reversed‐phase high‐performance liquid chromatography, the molecularly imprinted polymer was used to selectively enrich, separate and analyze fluoroquinolones present in lake water. The results showed that the recoveries of the four fluoroquinolones were 92.6–100.5%, and the relative standard deviations were 2.9–6.4% (n = 3). The novel molecularly imprinted polymer is an excellent adsorbent and has broad application prospects in the enrichment and separation of trace analytes in complex samples.     

Magnetic porous carbon derived from Co‐doped metal–organic frameworks for the magnetic solid‐phase extraction of endocrine disrupting chemicals

Metal–organic frameworks‐5 (MOF‐5) was explored as a template to prepare porous carbon due to its high surface area, large pore volume, and permanent nanoscale porosity. Magnetic porous carbon, Co@MOF‐5‐C, was fabricated by the one‐step direct carbonization of Co‐doped MOF‐5. After carbonization, the magnetic cobalt nanoparticles are well dispersed in the porous carbon matrix, and Co@MOF‐5‐C displays strong magnetism (with the saturation magnetization intensity of 70.17emu/g), high‐specific surface area, and large pore volume. To evaluate its extraction performance, the Co@MOF‐5‐C was applied as an adsorbent for the magnetic solid‐phase extraction of endocrine disrupting chemicals, followed by their analysis with high‐performance liquid chromatography. The developed method exhibits a good linear response in the range of 0.5–100 ng/mL for pond water and 1.0–100 ng/mL for juice samples. The limits of detection (S/N  = 3) for the analytes were in the range of 0.1–0.2 ng/mL.     

OBGMX: A web‐based generator of GROMACS topologies for molecular and periodic systems using the universal force field

OBGMX is a web service providing topologies for the GROMACS molecular dynamics software package according to the Universal Force Field, as implemented in the Open Babel package. OBGMX can deal with molecular and periodic systems. The geometrical parameters appearing in the potential energy functions for the bonded interactions can be set to those measured in the input configuration. The performance of OBGMX in reproducing the structure of periodic systems is analyzed by calculating the root mean‐squared displacements of optimized configurations of a large set of metal–organic frameworks. OBGMX is available at http://software‐lisc.fbk.eu/obgmx/ . © 2012 Wiley Periodicals, Inc.     

Fabrication of magnetic zinc adeninate metal–organic frameworks for the extraction of benzodiazepines from urine and wastewater

In this study, an alternative method for synthesizing magnetic cobalt adeninate metal–organic frameworks was developed, and the synthesized materials were examined for their potential application for separating and enriching benzodiazepines from complex samples. Benzodiazepines, widely used as hypnotics, muscle relaxants, sedatives, and anxiolytics, are a class of drugs that require accurate detection and monitoring. Results showed that Fe₃O₄ nanoparticles could be well anchored onto the external surface of cobalt adeninate metal–organic frameworks by using amino‐silane as a linkage. Their adsorption of benzodiazepines was mainly promoted by intermolecular hydrogen binding, π–π interactions and electrostatic attraction. Their potential application was evaluated by extraction of benzodiazepines in urine and wastewater samples prior to liquid chromatography with mass spectrometry. Under optimum conditions, the calibration curves were linear with a correlation coefficient of ≥0.9928 in the concentration range of 10–5000 ng/L for lorazepam and 5–5000 ng/L for estazolam, chlordiazepoxide, alprazolam, midazolam and triazolam. The limits of detection were in the range of 0.71–2.49 ng/L. The percent of extraction recoveries were 80.2–94.5% for urine and 84.1–94.4% for wastewater, respectively. Results suggested that magnetic cobalt adeninate metal–organic frameworks could potentially be a promising material for enriching benzodiazepines from urine and wastewater with high accuracy and precision.     

Immobilization of AIEgens into metal‐organic frameworks: Ligand design,emission behavior,and applications

Aggregation‐induced emission (AIE), in which the luminophores are highly emissive in aggregate state, is one of the most unique photophysical phenomena and has shown interesting applications in many areas. The immobilization of AIE luminogens (AIEgens) into metal‐organic frameworks (MOFs), which are inorganic‐organic hybrid porous materials with tunable and predictable structures, has been investigated over the past few years. These well‐defined porous frameworks cannot only provide an ideal platform for studying the mechanism of AIE phenomenon in solid state, but also show potential applications from sensing to white light‐emitting diodes. In this highlight, we will summarize the recent progress of AIEgens‐based MOFs, including ligand design, emission behavior, and applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1809–1817     

Dispersive solid‐phase extraction of buprenorphine from biological fluids using metal‐organic frameworks and its determination by ultra‐performance liquid chromatography

In this work, various types of metal‐organic frameworks were synthesized, and their affinities toward buprenorphine were evaluated using dispersive solid‐phase extraction. The extracted buprenorphine was determined by ultra high performance liquid chromatography‐ultraviolet detection system. The highest extraction recovery was observed by employing zeolitic imidazole framework‐67. Then, a facile and fast extraction method was designed for the extraction and purification of the target drug. Optimization of the extraction method was carried out by the design of experiment approach. A linearity range of 1–1000 μg/L with the limit of detection of 0.15 μg/L and relative standard deviations (50 μg/L, n = 5) of 3.4% was obtained for standard sample analysis. Under optimized experimental and instrumental conditions, the relative recoveries were in the range of 95 to 111%. Eventually, zeolitic imidazole framework‐67 was successfully employed for the extraction and determination of buprenorphine in the biological fluids with satisfactory results.     

Preparation and evaluation of open‐tubular capillary column combining a metal–organic framework and a brush‐shaped polymer for liquid chromatography

In this work, an open‐tubular capillary liquid‐phase column was prepared by modifying chain polymer on the inner surface of capillary and chemical bonding of metal organic frameworks, NH₂‐UiO‐66, to the brushes of chain polymer (poly(glycidyl methacrylate)). Besides advantages of facial preparation and good permeability, the chain polymer effectively increases the modification amount of NH₂‐UiO‐66 nanoparticles to increase the phase ratio of open‐tubular capillary column and enhance the interactions with analytes. The results of scanning electron microscope energy‐dispersive X‐ray spectra indicated that NH₂‐UiO‐66 nanoparticles were successfully bonded to the chain polymer. Because of the hydrophobic interaction and hydrogen bonding interaction between the analytes and the ligand of NH₂‐UiO‐66, different analytes were well separated on the NH₂‐UiO‐66‐modified poly(glycidyl methacrylate) capillary (1.12 m × 25 μm id × 365 μm od) with the high absolute column efficiency reaching 121 477 plates, benefiting from an open‐tubular column and low mass transfer resistance provided by polymer brush and metal–organic framework crystal. The relative standard deviations of the retention time for run‐to‐run, day‐to‐day, and column‐to‐column (n = 3) runs are below 4.28%, exhibiting good repeatability. Finally, the column was successfully applied to separation of flavonoids in licorice.     

Thermodynamics of the oxygen evolution electrocatalysis in a functionalized UiO‐66 metal‐organic frameworks

A density functional theory (DFT) approach was used to predict the thermodynamic energy barriers of the oxygen evolution reaction (OER) for three functionalized Metal‐organic Frameworks (MOFs). A UiO‐66(Zr) MOF design was selected for this study that incorporates three linker designs, a 1,4‐benzenedicarboxylate (BDC), BDC functionalized with an amino group (BDC + NH₂), and BDC functionalized with nitro group (BDC + NO₂). The study found several key differences between homogeneous planar catalyst thermodynamics and MOF‐based thermodynamics, the most significant being the non‐unique or heterogeneity of reaction sites. Additionally, the functionalization of the MOF was found to significantly influence the hydroperoxyl binding energy, which proves to be the largest hurdle for both oxide and MOF‐based catalyst. Both of these findings provide evidence that many of the limitations precluding planar homogeneous catalysts can be surpassed with a MOF‐based catalyst. The BDC + NH₂ proved to be the best performing catalyst with a predicted over‐potential for spontaneous OER evolution to be 3.03eV. © 2016 Wiley Periodicals, Inc.     

Recent applications of metal–organic frameworks in sample pretreatment

Metal–organic frameworks are promising materials in diverse analytical applications especially in sample pretreatment by virtue of their diverse structure topology, tunable pore size, permanent nanoscale porosity, high surface area, and good thermostability. According to hydrostability, metal–organic frameworks are divided into moisture‐sensitive and water‐stable types. In the actual applications, both kinds of metal–organic frameworks are usually engineered into hybrid composites containing magnetite, silicon dioxide, graphene, or directly carbonized to metal–organic frameworks derived carbon. These metal–organic frameworks based materials show good extraction performance to environmental pollutants. This review provides a critical overview of the applications of metal–organic frameworks and their composites in sample pretreatment modes, that is, solid‐phase extraction, magnetic solid‐phase extraction, micro‐solid‐phase extraction, solid‐phase microextraction, and stir bar solid extraction.     

Ab initio parametrized MM3 force field for the metal-organic framework MOF-5

A new valence force field has been developed and validated for a particular class of coordination polymers known as nanoporous metal-organic frameworks (MOFs), introduced recently by the group of Yaghi. The experimental, structural, and spectroscopic data in combination with density functional theory calculations on several model systems were used to parametrize the bonded terms of the force field, which explicitly treats the metal-oxygen interactions as partially covalent as well as distinguishes different types of oxygens in the framework. Both the experimental crystal structure of MOF-5 and vibrational infrared spectrum are reproduced reasonably well. The proposed force field is believed to be useful in atomistic simulations of adsorption/diffusion of guest molecules inside the flexible pores of this important class of MOF materials.     

Incorporation of metal‐organic framework amino‐modified MIL‐101 into glycidyl methacrylate monoliths for nano LC separation

Metal‐organic frameworks consisting of amino‐modified MIL‐101(M: Cr, Al, and Fe) crystals have been synthesized and subsequently incorporated to glycidyl methacrylate monoliths to develop novel stationary phases for nano‐liquid chromatography. Two incorporation approaches of these materials in monoliths were explored. The metal‐organic framework materials were firstly attached to the pore surface through reaction of epoxy groups present in the parent glycidyl methacrylate‐based monolith. Alternatively, NH₂‐MIL‐101(M) were admixed in the polymerization mixture. Using short time UV‐initiated polymerization, monolithic beds with homogenously dispersed metal‐organic frameworks were obtained. The chromatographic performance of embedded UV‐initiated composites was demonstrated with separations of polycyclic aromatic hydrocarbons and non‐steroidal anti‐inflammatory drugs as test solutes. In particular, the incorporation of the NH₂‐MIL‐101(Al) into the organic polymer monoliths led to an increase in the retention of all the analytes compared to the parent monolith. The hybrid monolithic columns also exhibited satisfactory run‐to‐run and column‐to‐column reproducibility.     

Preparation of metal‐organic framework UiO‐66‐incorporated polymer monolith for the extraction of trace levels of fungicides in environmental water and soil samples

A zirconium terephthalate metal‐organic framework‐incorporated poly(N‐vinylcarbazole‐co‐divinylbenzene) monolith was fabricated in a capillary by a thermal polymerization method. The optimized monolith had a homogeneous structure, good permeability, and stability. The monolith could be used for the effective enrichment of fungicides through π‐π interactions, electrostatic forces, and hydrogen bonds. The potential factors that affect the extraction efficiency, including ionic strength, solution pH, sample volume, and eluent volume, were investigated in detail. The monolith‐based in‐tube solid‐phase microextraction coupled with ultra‐high‐performance liquid chromatography and high‐resolution Orbitrap mass spectrometry was performed for the analysis of five fungicides (pyrimethanil, tebuconazole, hexaconazole, diniconazole, and flutriafol) in environmental samples. Under the optimized conditions, the linear ranges were 0.005–5 ng/mL for pyrimethanil, 0.01–5 ng/mL for flutriafol, and 0.05–5 ng/mL for other fungicides, respectively, with coefficients of determination ≥0.9911. The limits of detection were 1.34–14.8 ng/L. The columns showed good repeatability (relative standard deviations ≤9.3%, n = 5) and desirable column‐to‐column reproducibility (relative standard deviations 5.3–9.4%, n = 5). The proposed method was successfully applied for the simultaneous detection of five fungicides in water and soil samples, with recoveries of 90.4–97.5 and 84.0–95.3%, respectively.     

Aptamer‐modified magnetic metal‐organic framework MIL‐101 for highly efficient and selective enrichment of ochratoxin A

A facile and efficient strategy is developed to modify aptamers on the surface of the magnetic metal‐organic framework MIL‐101 for the rapid magnetic solid‐phase extraction of ochratoxin A. To the best of our knowledge, this is the first attempt to create a robust aptamer‐modified magnetic MIL‐101 with covalent bonding for the magnetic separation and enrichment of ochratoxin A. The saturated adsorption of ochratoxin A by aptamer‐modified magnetic MIL‐101 was 7.9 times greater than that by magnetic metal‐organic framework MIL‐101 due to the former's high selective recognition as well as good stability. It could be used for extraction more than 12 times with no significant changes in the extraction efficiency. An aptamer‐modified magnetic MIL‐101‐based method of magnetic solid‐phase extraction combined with ultra high performance liquid chromatography with tandem mass spectrometry was developed for the determination of trace ochratoxin A with limit of detection of 0.067 ng/L. Ochratoxin A of 4.53–13.7 ng/kg was determined in corn and peanut samples. The recoveries were in the range 82.8–108% with a relative standard deviation (n = 5) of 4.5–6.5%. These results show that aptamer‐modified magnetic MIL‐101 exhibits selective and effective enrichment performance and have excellent potential for the analysis of ultra‐trace targets from complex matrices.     

Comparisons of glyphosate adsorption properties of different functional Cr‐based metal–organic frameworks

A Cr‐based metal–organic framework, namely, MIL‐101(Cr), was modified with amino (NH₂–) and urea (UR₂–) groups, and the materials were evaluated as adsorbents for glyphosate, and a comparison with commercial activated carbon was also discussed. The effects of the adsorption factors, such as adsorbent concentration, adsorption time, pH and ionic strength were mainly investigated. The results showed that a pseudo‐second‐order rate equation described the adsorption kinetics mechanisms well, while the Langmuir model and the Freundlich model fitted different adsorption isotherms, respectively. Among the adsorbents we studied, NH₂‐MIL‐101(Cr) showed the maximum adsorbing capacity, which is 64.25 mg/g when pH = 3.0, while UR₂‐MIL‐101(Cr) did not reach the best adsorption performance due to the steric hindrance. The work opens up a new way for the modification of metal–organic frameworks for adsorption process.     

Computer simulation of trifluoromethane properties with ab initio force field

Intermolecular interaction potentials of the trifluoromethane dimer in 15 orientations have been calculated using the Hartree‐Fock (HF) self‐consistent theory and the second‐order Møller‐Plesset (MP2) perturbation theory. Single point energies at important geometries were also calibrated by the coupled cluster with single and double and perturbative triple excitation [CCSD(T)] calculations. We have employed Pople's medium size basis sets [up to 6‐311++G(3df,3pd)] and Dunning's correlation consistent basis sets (up to aug‐cc‐pVQZ). Basis set limit potential values were obtained through well‐studied extrapolation methods. The calculated MP2 potential data were employed to parameterize a 5‐site force field for molecular simulations. We performed molecular dynamics simulations using the constructed ab initio force field and compared the simulation results with experiments. Quantitative agreements for the atom‐wise radial distribution functions and the self‐diffusion coefficients over a wide range of experimental conditions can be obtained, thus validating the ab initio force field without using experimental data a priori. © 2011 Wiley Periodicals, Inc. J Comput Chem, 2011     

Development of a needle trap device packed with titanium‐based metal‐organic framework sorbent for extraction of phenolic derivatives in air

We developed a novel method of needle trap device packed with titanium‐based metal‐organic framework for the extraction of phenolic derivatives in air followed by gas chromatography‐flame ionization detector analysis. The synthetized adsorbent was packed inside a 22‐gauge spinal needle. This method was first tested at laboratory scale, and then was used for field sampling of phenolic derivatives in air. A glass chamber placed on a heater at 60°C was used to provide different concentrations of phenolic derivatives. The desorption conditions and breakthrough volume were optimized using response surface methodology. The limit of detection and limit of quantitation of the proposed method were estimated to be in the range of 0.001–0.12 and 0.003–0.62 ng/mL, respectively, indicating a high sensitivity for the suggested sampler. Storing the packed needle trap device in a refrigerator at 4?C for 60 days did not dramatically affect the storage stability. Our findings indicated that there was a high correlation coefficient (R² = 0.99) between the measurement results of this method and the NIOSH recommended method (XAD‐7 sorbent tube). Therefore, it can be concluded that the needle trap device packed with titanium‐based metal‐organic framework can be used as a efficient method for extraction of phenolic derivatives in air.