Convergence in the QM‐only and QM/MM modeling of enzymatic reactions: A case study for acetylene hydratase

We report systematic quantum mechanics‐only (QM‐only) and QM/molecular mechanics (MM) calculations on an enzyme‐catalyzed reaction to assess the convergence behavior of QM‐only and QM/MM energies with respect to the size of the chosen QM region. The QM and MM parts are described by density functional theory (typically B3LYP/def2‐SVP) and the CHARMM force field, respectively. Extending our previous work on acetylene hydratase with QM regions up to 157 atoms (Liao and Thiel, J. Chem. Theory Comput. 2012, 8, 3793), we performed QM/MM geometry optimizations with a QM region M4 composed of 408 atoms, as well as further QM/MM single‐point calculations with even larger QM regions up to 657 atoms. A charge deletion analysis was conducted for the previously used QM/MM model ( M3a , with a QM region of 157 atoms) to identify all MM residues with strong electrostatic contributions to the reaction energetics (typically more than 2 kcal/mol), which were then included in M4 . QM/MM calculations with this large QM region M4 lead to the same overall mechanism as the previous QM/MM calculations with M3a , but there are some variations in the relative energies of the stationary points, with a mean absolute deviation (MAD) of 2.7 kcal/mol. The energies of the two relevant transition states are close to each other at all levels applied (typically within 2 kcal/mol), with the first (second) one being rate‐limiting in the QM/MM calculations with M3a ( M4 ). QM‐only gas‐phase calculations give a very similar energy profile for QM region M4 (MAD of 1.7 kcal/mol), contrary to the situation for M3a where we had previously found significant discrepancies between the QM‐only and QM/MM results (MAD of 7.9 kcal/mol). Extension of the QM region beyond M4 up to M7 (657 atoms) leads to only rather small variations in the relative energies from single‐point QM‐only and QM/MM calculations (MAD typically about 1–2 kcal/mol). In the case of acetylene hydratase, a model with 408 QM atoms thus seems sufficient to achieve convergence in the computed relative energies to within 1–2 kcal/mol.Copyright © 2013 Wiley Periodicals, Inc.     

Mechanism of proteolysis in matrix metalloproteinase‐2 revealed by QM/MM modeling

The mechanism of enzymatic peptide hydrolysis in matrix metalloproteinase‐2 (MMP‐2) was studied at atomic resolution through quantum mechanics/molecular mechanics (QM/MM) simulations. An all‐atom three‐dimensional molecular model was constructed on the basis of a crystal structure from the Protein Data Bank (ID: 1QIB), and the oligopeptide Ace‐Gln‐Gly～Ile‐Ala‐Gly‐Nme was considered as the substrate. Two QM/MM software packages and several computational protocols were employed to calculate QM/MM energy profiles for a four‐step mechanism involving an initial nucleophilic attack followed by hydrogen bond rearrangement, proton transfer, and C? N bond cleavage. These QM/MM calculations consistently yield rather low overall barriers for the chemical steps, in the range of 5–10 kcal/mol, for diverse QM treatments (PBE0, B3LYP, and BB1K density functionals as well as local coupled cluster treatments) and two MM force fields (CHARMM and AMBER). It, thus, seems likely that product release is the rate‐limiting step in MMP‐2 catalysis. This is supported by an exploration of various release channels through QM/MM reaction path calculations and steered molecular dynamics simulations. © 2015 Wiley Periodicals, Inc.     

Calculation of wave‐functions with frozen orbitals in mixed quantum mechanics/molecular mechanics methods. II. Application of the local basis equation

The application of the local basis equation (Ferenczy and Adams, J. Chem. Phys. 2009 , 130, 134108) in mixed quantum mechanics/molecular mechanics (QM/MM) and quantum mechanics/quantum mechanics (QM/QM) methods is investigated. This equation is suitable to derive local basis nonorthogonal orbitals that minimize the energy of the system and it exhibits good convergence properties in a self‐consistent field solution. These features make the equation appropriate to be used in mixed QM/MM and QM/QM methods to optimize orbitals in the field of frozen localized orbitals connecting the subsystems. Calculations performed for several properties in divers systems show that the method is robust with various choices of the frozen orbitals and frontier atom properties. With appropriate basis set assignment, it gives results equivalent with those of a related approach [G. G. Ferenczy previous paper in this issue] using the Huzinaga equation. Thus, the local basis equation can be used in mixed QM/MM methods with small size quantum subsystems to calculate properties in good agreement with reference Hartree–Fock–Roothaan results. It is shown that bond charges are not necessary when the local basis equation is applied, although they are required for the self‐consistent field solution of the Huzinaga equation based method. Conversely, the deformation of the wave‐function near to the boundary is observed without bond charges and this has a significant effect on deprotonation energies but a less pronounced effect when the total charge of the system is conserved. The local basis equation can also be used to define a two layer quantum system with nonorthogonal localized orbitals surrounding the central delocalized quantum subsystem. © 2013 Wiley Periodicals, Inc.     

New QM/MM implementation of the DFTB3 method in the gromacs package

The approximate density‐functional tight‐binding theory method DFTB3 has been implemented in the quantum mechanics/molecular mechanics (QM/MM) framework of the Gromacs molecular simulation package. We show that the efficient smooth particle–mesh Ewald implementation of Gromacs extends to the calculation of QM/MM electrostatic interactions. Further, we make use of the various free‐energy functionalities provided by Gromacs and the PLUMED plugin. We exploit the versatility and performance of the current framework in three typical applications of QM/MM methods to solve biophysical problems: (i) ultrafast proton transfer in malonaldehyde, (ii) conformation of the alanine dipeptide, and (iii) electron‐induced repair of a DNA lesion. Also discussed is the further development of the framework, regarding mostly the options for parallelization. © 2015 Wiley Periodicals, Inc.     

How Photoisomerization Drives Peptide Folding and Unfolding: Insights from QM/MM and MM Dynamics Simulations

Photoswitchable azobenzene cross‐linkers can control the folding and unfolding of peptides by photoisomerization and can thus regulate peptide affinities and enzyme activities. Using quantum mechanics/molecular mechanics (QM/MM) methods and classical MM force fields, we report the first molecular dynamics simulations of the photoinduced folding and unfolding processes in the azobenzene cross‐linked FK‐11 peptide. We find that the interactions between the peptide and the azobenzene cross‐linker are crucial for controlling the evolution of the secondary structure of the peptide and responsible for accelerating the folding and unfolding events. They also modify the photoisomerization mechanism of the azobenzene cross‐linker compared with the situation in vacuo or in solution.     

Ab initio quantum mechanics-based free energy perturbation method for calculating relative solvation free energies

A free energy perturbation (FEP) method was developed that uses ab initio quantum mechanics (QM) for treating the solute molecules and molecular mechanics (MM) for treating the surroundings. Like our earlier results using AM1 semi empirical QMs, the ab initio QM/MM-based FEP method was shown to accurately calculate relative solvation free energies for a diverse set of small molecules that differ significantly in structure, aromaticity, hydrogen bonding potential, and electron density. Accuracy was similar to or better than conventional FEP methods. The QM/MM-based methods eliminate the need for time-consuming development of MM force field parameters, which are frequently required for drug-like molecules containing structural motifs not adequately described by MM. Future automation of the method and parallelization of the code for Linux 128/256/512 clusters is expected to enhance the speed and increase its use for drug design and lead optimization.     

Solvents effects on the mechanism of cellulose hydrolysis: A QM/MM study

This article reports a combined quantum mechanics/molecular mechanics (QM/MM) investigation on the acid hydrolysis of cellulose in water using two different models, cellobiose and a 40‐unit cellulose chain. The explicitly treated solvent molecules strongly influence the conformations, intramolecular hydrogen bonds, and exoanomeric effects in these models. As these features are largely responsible for the barrier to cellulose hydrolysis, the present QM/MM results for the pathways and reaction intermediates in water are expected to be more realistic than those from a former density functional theory (DFT) study with implicit solvent (CPCM). However, in a qualitative sense, there is reasonable agreement between the DFT/CPCM and QM/MM predictions for the reaction mechanism. Differences arise mainly from specific solute–solvent hydrogen bonds that are only captured by QM/MM and not by DFT/CPCM. © 2015 Wiley Periodicals, Inc.     

Mixed ab initio QM/MM modeling using frozen orbitals and tests with alanine dipeptide and tetrapeptide

Methodology is discussed for mixed ab initio quantum mechanics/molecular mechanics modeling of systems where the quantum mechanics (QM) and molecular mechanics (MM) regions are within the same molecule. The ab initio QM calculations are at the restricted Hartree–Fock level using the pseudospectral method of the Jaguar program while the MM part is treated with the OPLS force fields implemented in the IMPACT program. The interface between the QM and MM regions, in particular, is elaborated upon, as it is dealt with by “breaking” bonds at the boundaries and using Boys-localized orbitals found from model molecules in place of the bonds. These orbitals are kept frozen during QM calculations. Results from tests of the method to find relative conformational energies and geometries of alanine dipeptides and alanine tetrapeptides are presented along with comparisons to pure QM and pure MM calculations. ©1999 John Wiley & Sons, Inc. J Comput Chem 20: 1468–1494, 1999     

Probing the range of applicability of structure‐ and energy‐adjusted QM/MM link bonds

The hydrogen‐capping method is one of the most popular and widely used coupling‐schemes for quantum mechanics/molecular mechanics (QM/MM)‐molecular dynamics simulations of macromolecular systems. This is mostly due to the fact that it is fairly convenient to implement and parametrize, thus providing an excellent compromise between accuracy and computational effort. In this work, a viable and straight‐forward approach to optimize the placing of the link atom on a suitable distance ratio between the frontier atoms is discussed. To further increase the accuracy, instead of global parameters for all amino acids, different parameter sets for each type of amino acid are derived. The dependency of the link bond parameters on the chemical environment and the used QM‐method is probed to assess the range of applicability of the parametrization. Suitable sets of parameters for RI‐MP2, B3LYP, (RI)‐B3LYP‐D3, and RI‐BLYP‐D3 at triple‐zeta level for all relevant proteinogenic amino acids are presented. Furthermore, the scope and range of the perturbation, stemming from the introduction of link bonds is evaluated through application of the presented QM/MM scheme in calculations of the active site of 15S‐lipoxygenase. © 2015 Wiley Periodicals, Inc.     

Converging ligand‐binding free energies obtained with free‐energy perturbations at the quantum mechanical level

In this article, the convergence of quantum mechanical (QM) free‐energy simulations based on molecular dynamics simulations at the molecular mechanics (MM) level has been investigated. We have estimated relative free energies for the binding of nine cyclic carboxylate ligands to the octa‐acid deep‐cavity host, including the host, the ligand, and all water molecules within 4.5 Å of the ligand in the QM calculations (158–224 atoms). We use single‐step exponential averaging (ssEA) and the non‐Boltzmann Bennett acceptance ratio (NBB) methods to estimate QM/MM free energy with the semi‐empirical PM6‐DH2X method, both based on interaction energies. We show that ssEA with cumulant expansion gives a better convergence and uses half as many QM calculations as NBB, although the two methods give consistent results. With 720,000 QM calculations per transformation, QM/MM free‐energy estimates with a precision of 1 kJ/mol can be obtained for all eight relative energies with ssEA, showing that this approach can be used to calculate converged QM/MM binding free energies for realistic systems and large QM partitions. © 2016 The Authors. Journal of Computational Chemistry Published by Wiley Periodicals, Inc.     

Comparison of radii sets,entropy, QM methods,and sampling on MM‐PBSA,MM‐GBSA,and QM/MM‐GBSA ligand binding energies of F. tularensis enoyl‐ACP reductase (FabI)

To validate a method for predicting the binding affinities of FabI inhibitors, three implicit solvent methods, MM‐PBSA, MM‐GBSA, and QM/MM‐GBSA were carefully compared using 16 benzimidazole inhibitors in complex with Francisella tularensis FabI. The data suggests that the prediction results are sensitive to radii sets, GB methods, QM Hamiltonians, sampling protocols, and simulation length, if only one simulation trajectory is used for each ligand. In this case, QM/MM‐GBSA using 6 ns MD simulation trajectories together with GB^neck2, PM3, and the mbondi2 radii set, generate the closest agreement with experimental values (r² = 0.88). However, if the three implicit solvent methods are averaged from six 1 ns MD simulations for each ligand (called “multiple independent sampling”), the prediction results are relatively insensitive to all the tested parameters. Moreover, MM/GBSA together with GB^HCT and mbondi, using 600 frames extracted evenly from six 0.25 ns MD simulations, can also provide accurate prediction to experimental values (r² = 0.84). Therefore, the multiple independent sampling method can be more efficient than a single, long simulation method. Since future scaffold expansions may significantly change the benzimidazole's physiochemical properties (charges, etc.) and possibly binding modes, which may affect the sensitivities of various parameters, the relatively insensitive “multiple independent sampling method” may avoid the need of an entirely new validation study. Moreover, due to large fluctuating entropy values, (QM/)MM‐P(G)BSA were limited to inhibitors’ relative affinity prediction, but not the absolute affinity. The developed protocol will support an ongoing benzimidazole lead optimization program. © 2015 Wiley Periodicals, Inc.     

Substrate‐Guided Front‐Face Reaction Revealed by Combined Structural Snapshots and Metadynamics for the Polypeptide N‐Acetylgalactosaminyltransferase 2

The retaining glycosyltransferase GalNAc‐T2 is a member of a large family of human polypeptide GalNAc‐transferases that is responsible for the post‐translational modification of many cell‐surface proteins. By the use of combined structural and computational approaches, we provide the first set of structural snapshots of the enzyme during the catalytic cycle and combine these with quantum‐mechanics/molecular‐mechanics (QM/MM) metadynamics to unravel the catalytic mechanism of this retaining enzyme at the atomic‐electronic level of detail. Our study provides a detailed structural rationale for an ordered bi–bi kinetic mechanism and reveals critical aspects of substrate recognition, which dictate the specificity for acceptor Thr versus Ser residues and enforce a front‐face S_Ni‐type reaction in which the substrate N‐acetyl sugar substituent coordinates efficient glycosyl transfer.     

量子力学和分子力学组合方法

量子力学和分子力学(QM/MM)组合方法结合了量子力学的精确性和分子力学的高效性,在研究凝聚态中的化学反应及生物大分子的结构和活性等方面发挥着重要作用。本文主要介绍了QM/MM组合方法的基本原理及国内外有关QM/MM组合方法的研究进展。     

Quantum study of the active sites of the γ alumina surface (II): QM/MM (LSCF) approach to water, hydrogen disulfide and carbon monoxide adsorption

The mixed quantum mechanics/molecular mechanics (QM/MM) local self consistent field (LSCF) method is applied to study the adsorption of water, hydrogen sulfide, and carbon monoxide molecules on γ alumina surfaces. The effect of the long-range contributions included in the LSCF adsorption/dissociation energies are compared to cluster results. For the carbon monoxide, the long-range contributions do not change the adsorption energies in comparison with the cluster approach. In opposition, the long-range contributions lower the adsorption and dissociation energies of water and hydrogen disulfide. Cautions to be taken on the application of the LSCF method to γ alumina are also discussed.