The solvent effect on two competing reaction mechanisms involving hypervalent iodine reagents (λ3‐iodanes): Facing the limit of the stationary quantum chemical approach

Trifluoromethylation of acetonitrile with 3,3‐dimethyl‐1‐(trifluoromethyl)?1λ³,2‐ benziodoxol is assumed to occur via reductive elimination (RE) of the electrophilic CF₃‐ligand and MeCN bound to the hypervalent iodine. Computations in gas phase showed that the reaction might also occur via an S_N2 mechanism. There is a substantial solvent effect present for both reaction mechanisms, and their energies of activation are very sensitive toward the solvent model used (implicit, microsolvation, and cluster‐continuum). With polarizable continuum model‐based methods, the S_N2 mechanism becomes less favorable. Applying the cluster‐continuum model, using a shell of solvent molecules derived from ab initio molecular dynamics (AIMD) simulations, the gap between the two activation barriers ( ) is lowered to a few kcal mol^?1 and also shows that the activation entropies ( ) and volumes ( ) for the two mechanisms differ substantially. A quantitative assessment of will therefore only be possible using AIMD. A natural bond orbital‐analysis gives further insight into the activation of the CF₃‐reagent by protonation. © 2014 Wiley Periodicals, Inc.     

Computational studies on optoelectronic and charge transfer properties of some perylene‐based donor‐π‐acceptor systems for dye sensitized solar cell applications

We report DFT studies on some perylene‐based dyes for their electron transfer properties in solar cell applications. The study involves modeling of different donor‐π‐acceptor type sensitizers, with perylene as the donor, furan/pyrrole/thiophene as the π‐bridge and cyanoacrylic group as the acceptor. The effect of different π‐bridges and various substituents on the perylene donor was evaluated in terms of opto‐electronic and photovoltaic parameters such as HOMO‐LUMO energy gap, λ_max, light harvesting efficiency(LHE), electron injection efficiency (Ø_inject), excited state dye potential (E^dye*), reorganization energy(λ), and free energy of dye regeneration (). The effect of various substituents on the dye–I₂ interaction and hence recombination process was also evaluated. We found that the furan‐based dimethylamine derivative exhibits a better balance of the various optical and photovoltaic properties. Finally, we evaluated the overall opto‐electronic and transport parameters of the TiO₂‐dye assembly after anchoring the dyes on the model TiO₂ cluster assembly.     

Phenanthrene‐Fused‐Quinoxaline as a Key Building Block for Highly Efficient and Stable Sensitizers in Copper‐Electrolyte‐Based Dye‐Sensitized Solar Cells

Dye‐sensitized solar cells (DSSCs) based on Cu^II/I bipyridyl or phenanthroline complexes as redox shuttles have achieved very high open‐circuit voltages (V_OC, more than 1 V). However, their short‐circuit photocurrent density (J_SC) has remained modest. Increasing the J_SC is expected to extend the spectral response of sensitizers to the red or NIR region while maintaining efficient electron injection in the mesoscopic TiO₂ film and fast regeneration by the Cu^I complex. Herein, we report two new D‐A‐π‐A‐featured sensitizers termed HY63 and HY64 , which employ benzothiadiazole (BT) or phenanthrene‐fused‐quinoxaline (PFQ), respectively, as the auxiliary electron‐withdrawing acceptor moiety. Despite their very similar energy levels and absorption onsets, HY64 ‐based DSSCs outperform their HY63 counterparts, achieving a power conversion efficiency (PCE) of 12.5 %. PFQ is superior to BT in reducing charge recombination resulting in the near‐quantitative collection of photogenerated charge carriers.     

Restricted Rotation of σ‐Bonds through a Rigidified Donor Structure to Increase the ICT Ability of Platinum‐Acetylide‐Based DSSCs

A series of new triarylamine‐based platinum‐acetylide complexes ( WY s) have been designed and synthesized as new sensitizers for applications in dye‐sensitized solar cells (DSSCs). With the aim of investigating the effect of a rigidifying donor structure on the photoelectrical parameters of the corresponding DSSCs, two new sensitizers, WY1 and WY2 , with rigid and coplanar fluorene units as an electron donor, were prepared. Moreover, two sensitizers that contained triphenylamine units as an electron donor, WY3 and WY4 , were also synthesized for comparison. The photo‐ and electrochemical properties of all of these new complexes have been extensively explored. We found that the dimethyl‐fluorene unit exhibited a stronger electron‐donating ability and better photovoltaic performance compared to the triphenylamine unit, owing to its rigidifying structure, which restricted the rotation of σ bonds, thus increasing the conjugation efficiency. Furthermore, WY2 , which contained a dimethyl‐fluorene unit as an electron donor and bithiophene as a π bridge, showed a relatively high open‐circuit voltage (V_oc) of 640 mV and a PCE of 4.09 %. This work has not only expanded the choice of platinum‐acetylide sensitizers, but also demonstrates the advantages of restricted rotation of donor σ bonds for improved behavior of the corresponding DSSCs.     

Two main chain polymeric metal complexes as dye sensitizers for dye‐sensitized solar cells based on the coordination of the ligand containing 8‐hydroxyquinoline and phenylethyl or fluorene units with Eu(III)

Two novel main chain polymeric metal complexes containing 8‐hydroxyquinoline europium complexes and phenylethyl or fluorene units: 1,4‐Dioctyloxy‐2,5‐bis[2‐(8‐hydroxyquinoline)‐vinyl]‐benzene Eu(III) (3) and 2,7‐bis[2‐(8‐hydroxyquinoline)‐vinyl]‐9,9′‐diocthylfluorene Eu(III) (4) with donor–acceptor‐π‐conjugated structure (D‐π‐A) have been synthesized and investigated as dye sensitizers for dye‐sensitized solar cells dyes (DSSCs). They have been determined and studied by FT‐IR, TGA, DSC, GPC, Elemental analysis, UV–vis absorption spectroscopy, photoluminescence spectroscopy, cyclic voltammetry, and application in dye‐sensitized solar cells (DSSCs) as dye sensitizers. On the basis of optimized dye and molecular structure, they have shown solar‐to‐electricity conversion efficiency 2.25% for 3 (J_sc = 4.77 mA cm^?2, V_oc = 630 mV, FF = 0.75) and 3.04% for 4 (J_sc = 6.33 mA cm^?2, V_oc = 640 mV, FF = 0.75), under the illumination of AM1.5G, 100 mW/cm². The IPCE of 3 and 4 are 30% and 46% at 400 nm, respectively. Besides, they showed good stabilities with thermal decomposition temperatures at 280 °C and 225 °C, respectively, which are suitable for DSSCs. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1943–1951, 2010     

Enhanced Performance of Quasi‐Solid‐State Dye‐Sensitized Solar Cells by Branching the Linear Substituent in Sensitizers Based on Thieno[3,4‐c]pyrrole‐4,6‐dione

Thieno[3,4‐c]pyrrole‐4,6‐dione‐based organic sensitizers with triphenylamine ( FNE38 and FNE40 ) or julolidine ( FNE39 and FNE41 ) as electron‐donating unit have been designed and synthesized. A linear hexyl group or a branched alkyl chain, the 2‐ethylhexyl group, is incorporated into molecular skeleton of the dyes to minimize intermolecular interactions. The absorption, electrochemical, and photovoltaic properties for these sensitizers were then systematically investigated. It is found that the sensitizers have similar photophysical and electrochemical properties, such as absorption spectra and energy levels, owing to their close chemical structures. However, the quasi‐solid‐state dye‐sensitized solar cells (DSSCs) based on the two types of sensitizers exhibit very different performance parameters. Upon the incorporation of the short ethyl group on the hexyl moiety, enhancements in both open‐circuit voltage (V_oc) and short‐circuit current (J_sc) are achieved for the quasi‐solid‐state DSSCs. The V_oc gains originating from the suppression of charge recombination were quantitatively investigated and are in good agreement with the experimentally observed V_oc enhancements. Therefore, an enhanced solar energy conversion efficiency (η) of 6.16 %, constituting an increase by 23 %, is achieved under standard AM 1.5 sunlight without the use of coadsorbant agents for the quasi‐solid‐state DSSC based on sensitizer FNE40 , which bears the branched alkyl group, in comparison with that based on FNE38 carrying the linear alkyl group. This work presents a design concept for considering the crucial importance of the branched alkyl substituent in novel metal‐free organic sensitizers.     

Distinguishing and quantifying the torquoselectivity in competitive ring‐opening reactions using the stress tensor and QTAIM

Currently the theories to explain and predict the classification of the electronic reorganization due to the torquoselectivity of a ring‐opening reaction cannot accommodate the directional character of the reaction pathway; the torquoselectivity is a type of stereoselectivity and therefore is dependent on the pathway. Therefore, in this investigation we introduced new measures from quantum theory of atoms in molecules and the stress tensor to clearly distinguish and quantify the transition states of the inward (TSIC) and outward (TSOC) conrotations of competitive ring‐opening reactions of 3‐(trifluoromethyl)cyclobut‐1‐ene and 1‐cyano‐1‐methylcyclobutene. We find the metallicity ξ( r _b) of the ring‐opening bond does not occur exactly at the transition state in agreement with transition state theory. The vector‐based stress tensor response β_σ was used to distinguish the effect of the CN, CH₃, and CF₃ groups on the TSIC and TSOC paths that was consistent with the ellipticity ε, the total local energy density H( r_b ) and the stress tensor stiffness S_σ. We determine the directional properties of the TSIC and TSOC ring‐opening reactions by constructing a stress tensor space with trajectories (s) with length l in real space, longer l correlated with the lowest density functional theory‐evaluated total energy barrier and hence will be more thermodynamically favored. © 2016 Wiley Periodicals, Inc.     

Exploring possible reaction pathways for the o‐atom transfer reactions to unsaturated substrates catalyzed by a [Ni‐NO2] ↔ [Ni‐NO] redox couple using DFT methods

The (nitro)(N‐methyldithiocarbamato)(trimethylphospane)nickel(II), [Ni(NO₂)(S₂CNHMe)(PMe₃)] complex catalyses efficiently the O‐atom transfer reactions to CO and acetylene. Energetically feasible sequence of elementary steps involved in the catalytic cycle of the air oxidation of CO and acetylene are proposed promoted by the Ni(NO₂)(S₂CNHMe)(PMe₃)] ↔ Ni(NO₂)(S₂CNHMe)(PMe₃) redox couple using DFT methods both in vacuum and dichloromethane solutions. The catalytic air oxidation of HC≡CH involves formation of a five‐member metallacycle intermediate, via a [3 + 2] cyclo‐addition reaction of HC≡CH to the Ni‐N = O moiety of the Ni(NO₂)(S₂CNHMe)(PMe₃)] complex, followed by a β H‐atom migration toward the C_α carbon atom of the coordinated acetylene and release of the oxidation product (ketene). The geometric and energetic reaction profile for the reversible [Ni( ‐NO₂)(S₂CNHMe)(PMe₃)] [Ni( ‐ONO)(S₂CNHMe)(PMe₃)] linkage isomerization has also been modeled by DFT calculations. © 2017 Wiley Periodicals, Inc.     

New Dual Donor–Acceptor (2D‐π‐2A) Porphyrin Sensitizers for Stable and Cost‐Effective Dye‐Sensitized Solar Cells

A series of porphyrin sensitizers that featured two electron‐donating groups and dual anchoring groups that were connected through a porphine π‐bridging unit have been synthesized and successfully applied in dye‐sensitized solar cells (DSSCs). The presence of electron‐donating groups had a significant influence on their spectroscopic, electrochemical, and photovoltaic properties. Overall, the dual anchoring groups gave tunable electronic properties and stronger attachment to TiO₂. These new dyes were readily synthesized in a minimum number of steps in gram‐scale quantities. Optical and electrochemical data confirmed the advantages of these dyes for use as sensitizers in DSSCs. Porphyrins with electron‐donating amino moieties provided improved charge separation and better charge‐injection efficiencies for the studied dual‐push–pull dyes. Attenuated total reflectance–Fourier‐transform infrared (ATR‐FTIR) and X‐ray photoelectron spectroscopy of the porphyrin dyes on TiO₂ suggest that both p‐carboxyphenyl groups are attached onto TiO₂, thereby resulting in strong attachment. Among these dyes, cis-Zn2BC2A , with two electron‐donating 3,6‐ditertbutyl‐phenyl‐carbazole groups and dual‐anchoring p‐carboxyphenyl groups, showed the highest efficiency of 4.07 %, with J_SC=9.81 mA cm^?2, V_OC=0.63 V, and FF=66 %. Our results also indicated a better photostability of the studied dual‐anchored sensitizers compared to their mono‐anchored analogues under identical conditions. These results provide insight into the developments of a new generation of high‐efficiency and thermally stable porphyrin sensitizers.     

Dyes and Redox Couples with Matched Energy Levels: Elimination of the Dye‐Regeneration Energy Loss in Dye‐Sensitized Solar Cells

In dye‐sensitized solar cells (DSSCs), a significant dye‐regeneration force (ΔG_reg⁰≥0.5 eV) is usually required for effective dye regeneration, which results in a major energy loss and limits the energy‐conversion efficiency of state‐of‐art DSSCs. We demonstrate that when dye molecules and redox couples that possess similar conjugated ligands are used, efficient dye regeneration occurs with zero or close‐to‐zero driving force. By using Ru(dcbpy)(bpy)₂²⁺ as the dye and Ru(bpy)₂(MeIm)₂^3+//2+ as the redox couple, a short‐circuit current (J_sc) of 4 mA cm^?2 and an open‐circuit voltage (V_oc) of 0.9 V were obtained with a ΔG_reg⁰ of 0.07 eV. The same was observed for the N3 dye and Ru(bpy)₂(SCN)₂^1+/0 (ΔG_reg⁰=0.0 eV), which produced an J_sc of 2.5 mA cm^?2 and V_oc of 0.6 V. Charge recombination occurs at pinholes, limiting the performance of the cells. This proof‐of‐concept study demonstrates that high V_oc values can be attained by significantly curtailing the dye‐regeneration force.     

Performance of dye-sensitized solar cells based on various sensitizers applied on TiO2-Nb2O5 core/shell photoanode structure

The present investigation described the performance of dye-sensitized solar cells (DSSCs) based on various sensitizers applied on TiO₂-Nb₂O₅ core/shell photoanode film. The novel photoanodes were prepared using composite of TiO₂ nanoparticles (TNPs) and TiO₂ nanorods (TNRs) as core (TNPRs) layer with Nb₂O₅ shell coating. As well, tantalum pentoxide (Ta₂O₅), a blocking layer applied over the core/shell film. The DSSCs were fabricated based on various sensitizers namely zinc phthalocyanine, indoline, indigo carmine, zinc porphyrin, N719, coumarin NKX-2700, polymer dye, quantum dots (QDs), perylene and squaraine. The I–V characteristics of the DSSCs, photocurrent density (Jsc), open-circuit voltage (Voc), fill factor (FF), and photoconversion efficiency (PCE) were determined under illumination of AM 1.5 G. Electrochemical impedance spectroscopy (EIS) analysis is carried out to study the charge transport and life-time of charge carriers at photoanode/dye/electrolyte interface of the DSSCs. The I–V and EIS results explicated that the core/shell with blocking layers were able to alleviate the electron transport and suppressed charge recombination at photoanode/dye/electrolyte interface of the DSSCs. Concerning the sensitizers, PCE of the DSSCs exemplify the order N719 > zinc porphyrin > coumarin NKX-2700 > indoline > squaraine > QDs > zinc phthalocyanine > perylene > polymer dye > indigo carmine dye. The results of the present work demonstrated that among the sensitizers studied, N719 showed the highest PCE and fill factor. Besides, the metal-free organic sensitizers (coumarin NKX-2700 and indoline) exhibited comparable PCE as compared to N719.     

Low‐energy structures of benzene clusters with a novel accurate potential surface

The benzene‐benzene (Bz‐Bz) interaction is present in several chemical systems and it is known to be crucial in understanding the specificity of important biological phenomena. In this work, we propose a novel Bz‐Bz analytical potential energy surface which is fine‐tuned on accurate ab initio calculations in order to improve its reliability. Once the Bz‐Bz interaction is modeled, an analytical function for the energy of the clusters may be obtained by summing up over all pair potentials. We apply an evolutionary algorithm (EA) to discover the lowest‐energy structures of clusters (for ), and the results are compared with previous global optimization studies where different potential functions were employed. Besides the global minimum, the EA also gives the structures of other low‐lying isomers ranked by the corresponding energy. Additional ab initio calculations are carried out for the low‐lying isomers of and clusters, and the global minimum is confirmed as the most stable structure for both sizes. Finally, a detailed analysis of the low‐energy isomers of the n = 13 and 19 magic‐number clusters is performed. The two lowest‐energy isomers show S₆ and C₃ symmetry, respectively, which is compatible with the experimental results available in the literature. The structures reported here are all non‐symmetric, showing two central Bz molecules surrounded by 12 nearest‐neighbor monomers in the case of the five lowest‐energy structures. © 2015 Wiley Periodicals, Inc.     

Ab initio potential energy surface and vibration–rotation energy levels of germanium dicarbide,GeC2

The accurate ground‐state potential energy surface of germanium dicarbide, GeC₂, has been determined from ab initio calculations using the coupled‐cluster approach. The core–electron correlation, higher‐order valence‐electron correlation, and scalar relativistic effects were taken into account. The potential energy surface of GeC₂ was shown to be extraordinarily flat near the T‐shaped equilibrium configuration. The potential energy barrier to the linear CCGe configuration was predicted to be 1218 cm⁻¹. The vibration–rotation energy levels of some GeC₂ isotopologues were calculated using a variational method. The vibrational bending mode ν₃ was found to be highly anharmonic, with the fundamental wavenumber being only 58 cm⁻¹. Vibrational progressions due to this mode were predicted for the , , and states of GeC₂. © 2018 Wiley Periodicals, Inc.     

Assessment of Luminescent Downshifting Layers for the Improvement of Light‐Harvesting Efficiency in Dye‐Sensitized Solar Cells

Luminescence downshifting (LDS) of light can be a practical photon management technique to compensate the narrow absorption band of high‐extinction‐coefficient dyes in dye‐sensitized solar cells (DSSCs). Herein, an optical analysis on the loss mechanisms in a reflective LDS (R‐LDS)/DSSC configuration is reported. For squaraine dye (550–700 nm absorption band) and CaAlSiN₃:Eu²⁺ LDS material (550–700 nm emission band), the major loss channels are found to be non‐unity luminescence quantum efficiency (QE) and electrolyte absorption. By using an ideal LDS layer (QE=100 %), a less absorbing electrolyte (Co‐based), and antireflection coatings, approximately 20 % better light harvesting is obtained. If the absorption/emission band of dye/LDS is shifted to 800 nm, a maximal short‐circuit current density (J_sc) of 22.1 mA cm^?2 can be achieved. By putting the LDS layer in front of the DSSC (transmissive mode), more significant loss channels are observed, and hence a lower overall efficiency than the R‐LDS configuration.     

First‐Generation Subporphyrinatoboron(III) Sensitizers Surpass the 10 % Power Conversion Efficiency Threshold

Subporphyrinatoboron(III) (SubB) sensitizers were synthesized for use in dye‐sensitized solar cells (DSSCs). The prototype, which comprises a sterically demanding 3,5‐di‐tert‐butylphenyl scaffold, a meso‐ethynylphenyl spacer, and a cyanoacrylic acid anchoring group, achieved an open‐circuit voltage V_OC of 836 mV, short‐circuit current density J_SC of 15.3 mA cm^?2, fill factor of 0.786, and a photon‐to‐current conversion efficiency of 10.1 %. Such astonishing figures suggest that a bright future lies ahead for SubB in the realm of DSSCs.     

Organic Dyes with Well‐Defined Structures for Highly Efficient Dye‐Sensitised Solar Cells Based on a Cobalt Electrolyte

Seven SGT organics dyes, containing bis‐dimethylfluoreneyl amino groups with a dialkoxyphenyl unit as an electron donor and a cyanoacrylic acid group as an anchoring group, connected with oligothiophenes, fused thiophenes and benzothiadiazoles as π‐bridges, were designed and synthesised for applications in dye‐sensitised solar cells (DSSCs). The photovoltaic performance of DSSCs based on organic dyes with oligothiophenes depends on the molecular structure of the dyes, in terms of the length change of the π‐bridging units. The best performance was found with a π‐bridge length of about 6 Å. To further enhance the photovoltaic performance associated with this concept, cyclopenta[1,2‐b:5,4‐b′]dithiophene (CPDT) and benzothiadiazole were introduced into the π‐bridge unit. As a result, the DSSC based on the organic dye containing the CPDT moiety showed the best photovoltaic performance with a short‐circuit photocurrent density (J_sc) of 14.1 mA cm^?2, an open‐circuit voltage (V_oc) of 0.84 V and a fill factor (FF) of 0.72, corresponding to an overall conversion efficiency (η) of 8.61 % under standard AM 1.5 irradiation.     

Ethoxy‐substituted Oligo‐phenylenevinylene‐Bridged Organic Dyes for Efficient Dye‐Sensitized Solar Cells

Organic dyes with ethoxy‐substituted oligo‐phenylenevinylene as chromophores were synthesized for dye‐sensitized solar cells (DSSCs), and the detailed relationships between the dye structures, photophysical properties, electrochemical properties, and performances of DSSCs were described. The dye S3O showed broad IPCE spectra in the spectral range of 350–750 nm, and the dye S1P showed solar energy‐to‐electricity conversion efficiency (() of up to 4.23% under AM 1.5 irradiation (100 mW/cm²) in comparison with the reference Ru‐complex (N719 dye) with an η value of 5.90% under similar experimental conditions.     

Cyclometalated Ruthenium(II) Complexes Featuring Tridentate Click‐Derived Ligands for Dye‐Sensitized Solar Cell Applications

A series of heteroleptic bis(tridentate) Ru^II complexes featuring N^C^N‐cyclometalating ligands is presented. The 1,2,3‐triazole‐containing tridentate ligands are readily functionalized with hydrophobic side chains by means of click chemistry and the corresponding cyclometalated Ru^II complexes are easily synthesized. The performance of these thiocyanate‐free complexes in a dye‐sensitized solar cell was tested and a power conversion efficiency (PCE) of up to 4.0 % (J_sc=8.1 mA cm^?2, V_oc=0.66 V, FF=0.70) was achieved, while the black dye ((NBu₄)₃[Ru(Htctpy)(NCS)₃]; Htctpy=2,2′:6′,2′′‐terpyridine‐4′‐carboxylic acid‐4,4′′‐dicarboxylate) showed 5.2 % (J_sc=10.7 mA cm^?2, V_oc=0.69 V, FF=0.69) under comparable conditions. When co‐adsorbed with chenodeoxycholic acid, the PCE of the best cyclometalated dye could be improved to 4.5 % (J_sc=9.4 mA cm^?2, V_oc=0.65 V, FF=0.70). The PCEs correlate well with the light‐harvesting capabilities of the dyes, while a comparable incident photon‐to‐current efficiency was achieved with the cyclometalated dye and the black dye. Regeneration appeared to be efficient in the parent dye, despite the high energy of the highest occupied molecular orbital. The device performance was investigated in more detail by electrochemical impedance spectroscopy. Ultimately, a promising Ru^II sensitizer platform is presented that features a highly functionalizable “click”‐derived cyclometalating ligand.     

Photocurrent Enhancement of Dye‐Sensitized Solar Cells owing to Increased Dye‐Adsorption onto Silicon‐Nanoparticle‐Coated Titanium‐Dioxide Films

The inverse‐micellar preparation of Si nanoparticles (Nps) was improved by utilizing sodium naphthalide. The Si Nps were subsequently functionalized with 4‐vinylbenzoic acid for their attachment onto TiO₂ films of dye‐sensitized solar cells (DSSCs). The average diameter of the COOH‐functionalized Si (Si? COOH) Nps was 4.6(±1.7) nm. Depth profiling by secondary‐ion mass spectrometry revealed that the Si Nps were uniformly attached onto the TiO₂ films. The number of Ru^II dye molecules adsorbed onto a TiO₂ film that was treated with the Si? COOH Nps was 42 % higher than that on the untreated TiO₂ film. As a result, DSSCs that incorporated the Si? COOH Nps exhibited higher short‐circuit photocurrent density and an overall energy‐conversion efficiency than the untreated DSSCs by 22 % and 27 %, respectively. This enhanced performance, mostly owing to the intramolecular charge‐transfer to TiO₂ from the dye molecules that were anchored to the Si? COOH Nps, was confirmed by comparing the performance with two different Ru^II–bipyridine dyes (N719 and N749).