Imidomolybdenum(IV) porphyrin complexes: synthesis, characterization, and intermetal imido transfer reactivity

The imido(meso-tetra-p-tolylporphyrinato)molybdenum(IV) complexes, (TTP)Mo=NR, where R = C6H5 (1a), p-CH3C6H4 (1b), 2,4,6-(CH3)3C6H2 (1c), and 2,6-(i-Pr)2C6H4 (1d), can be prepared by the reaction of (TTP)MoCl2 with 2 equiv of LiNHR in toluene. Upon treatment of the imido complexes with pyridine derivatives, NC5H4-p-X (X = CH3, CH(CH3)2, C[triple bond]N), new six-coordinate complexes, (TTP)Mo=NR.NC5H4-p-X, were observed. The reaction between the molybdenum imido complexes, (TTP)Mo=NC6H5 or (TTP)Mo=NC6H4CH3, and (TTP)Ti(eta2-PhC[triple bond]CPh) resulted in complete imido group transfer and two-electron redox of the metal centers to give (TTP)Mo(eta2-PhC[triple bond]CPh) and (TTP)Ti=NC6H5 or (TTP)Ti=NC6H4CH3.     

Ansa-bridged eta5-cyclopentadienyl molybdenum and tungsten complexes: synthesis, structure and application in olefin epoxidation

Ansa-bridged eta(5)-cyclopentadienyl molybdenum and tungsten tricarbonyl complexes of formula [M(eta(5)-C(5)H(4)(CH(2))(3)-eta(1)-CH(2))(CO)(3)] (M=Mo or W) were synthesized and the X-ray crystal structure of the tungsten complex is reported. In the epoxidation of cyclooctene the molybdenum compound shows a high catalytic activity, approaching the observed activities for the most reactive unbridged complexes of composition CpMo(CO)(3)X (X=Cl, CH(3)). The activity of the tungsten complex is also amongst the highest catalytic activities for the olefinic epoxidation of complexes with the composition CpW(CO)(3)X and WO(2)X(2)L(2), reported so far. The low ring strain of the ansa-bridged system improves the stability of the complexes under oxidative conditions considerably in comparison to derivatives with a shorter bridge and therefore paves the way to introduction of chirality in these systems.     

Oxomolybdenum tetrathiolates with sterically encumbering ligands: modeling the effect of a protein matrix on electronic structure and reduction potentials

The effect of sterically encumbering ligands on the electronic structure of oxomolybdenum tetrathiolate complexes was determined using a combination of electronic absorption and magnetic circular dichroism spectroscopies, complimented by DFT bonding calculations, to understand geometric and electronic structure contributions to reduction potentials. These complexes are rudimentary models for a redox-active metalloenzyme active site in a protein matrix and allow for detailed spectroscopic probing of specific oxomolybdenum-thiolate interactions that are directly relevant to Mo-S(cysteine) bonding in pyranopterin molybdenum enzymes. Data are presented for three para-substituted oxomolybdenum tetrathiolate complexes ([PPh4][MoO(p-SPhCONHCH3)4], [PPh4][MoO(p-SPhCONHC(CH2O(CH2)2CN)3)4], and [PPh4][MoO(p-SPhCONHC(CH2O(CH2)2COOCH2CH3)3)4]). The Mo(V/IV) reduction potentials of the complexes in DMF are -1213, -1251, and -1247 mV, respectively. The remarkably similar electronic absorption and magnetic circular dichroism spectra of these complexes establish that the observed reduction potential differences are not a result of significant changes in the electronic structure of the [MoOS4]- cores as a function of the larger ligand size. We provide evidence that these reduction potential differences result from the driving force for a substantial reorganization of the O-Mo-S-C dihedral angle upon reduction, which decreases electron donation from the thiolate sulfurs to the reduced molybdenum center. The energy barrier to favorable O-Mo-S-C geometries results in a reorganizational energy increase, relative to [MoO(SPh)4](-/2-), that correlates with ligand size. The inherent flexible nature of oxomolybdenum-thiolate bonds indicate that thiolate ligand geometry, which controls Mo-S covalency, could affect the redox processes of monooxomolybdenum centers in pyranopterin molybdenum enzymes.     

The reduction of tris-dithiolene complexes of molybdenum(VI) and tungsten(VI) by hydroxide ion: kinetics and mechanism

The kinetic study of the spontaneous reduction of some neutral tris-dithiolene complexes [ML3] of molybdenum(VI) and tungsten(VI), (L = S2C6H4(2-), S2C6H3CH3(2-) and S2C2(CH3)2(2-); M = Mo or W) by tetrabutylammonium hydroxide in tetrahydrofuran-water solutions demonstrates that OH- is an effective reductant. Their reduction is fast, clean and quantitative. Depending upon both the molar ratio in which the reagents are mixed and the amount of water present, one- or two-electron reductions of these tris-dithiolene complexes were observed. If Bu4NOH is present in low concentration or/and at high concentrations of water, the total transformation of the neutral M(VI) complex into the monoanionic M(V) complex is the only observed process. Stopped-flow kinetic data for this reaction are consistent with the rate law: -d[ML3]/dt = d[ML3-]/dt = k[ML3][Bu4NOH]. The proposed mechanism involves nucleophilic attack of OH- to form a mono-anionic seven-coordinate intermediate [ML3OH]-, which interacts with another molecule of [ML3] to generate the monoanionic complex [ML3]- transfering the oxygen from coordinated OH- to water. Hydrogen peroxide was identified as the reaction product. The molybdenum complexes are more difficult to reduce than their corresponding tungsten complexes, and the values of k obtained for the molybdenum and tungsten series of complexes increase as the ene-1,2-dithiolate ligand becomes more electron-withdrawing (S2C6H4(2-) > S2C6H3CH3(2-) > S2C2(CH3)2(2-)). This investigation constitutes the only well-established interaction between hydroxide ion and a tris(dithiolene) complex, and supports a highly covalent bonding interaction between the metal and the hydroxide ion that modulates electron transfer reactions within these complexes.     

Desoxo molybdenum(IV) and tungsten(IV) bis(dithiolene) complexes: monomer-dimer interconversion involving reversible thiol bridge formation

Two series of thiol-bridged dimeric desoxo molybdenum(IV) and tungsten(IV) bis(dithiolene) complexes, [Et(4)N](2)[M(IV)(2)(SR)(2)(mnt)(4)] [M = Mo, R = (1) -Ph, (2) -CH(2)Ph, (3) -CH(2)CH(3), (4) -CH(2)CH(2)OH; M = W, R = (1a) -Ph, (2a) -CH(2)Ph, (3a) -CH(2)CH(3), (4a) -CH(2)CH(2)OH] and one monomeric desoxo complex, [Et(4)N](2)[WIV(SPh)(2)(mnt)(2)] (5a) are reported. These complexes are diamagnetic, and crystal structures of each of the complex (except 5a) exhibits a dimeric {M(IV)(2)(SR)(2)} core without any metal-metal bond where each metal atom possesses hexa coordination. The M-SR distance ranges from 2.437 to 2.484 Angstrom in molybdenum complexes and from 2.418 to 2.469 Angstrom in tungsten complexes. These complexes display Mo-S(R)-Mo angles ranging from 92.84 degrees to 96.20 degrees in the case of 1-4 and W-S(R)-W angles ranging from 91.20 degrees to 96.25 degrees in the case of 1a-4a. Interestingly, both the series of Mo(IV) and W(IV) dimeric complexes respond to an unprecedented interconversion between the dimer and the corresponding hexacoordinated monomer upon change of pH. This pH-dependent interconversion establishes the fact that even the pentacoordinated Mo(IV) and W(IV) bis(dithiolene) moieties are forced to dimerize; these can easily be reverted back to the corresponding monomeric complex, reflecting the utility of dithiolene ligand in stabilizing the Mo(IV)/W(IV) moiety in synthesized complexes similar to the active sites present in native proteins.     

取代苯甲酸和双(η~5-环戊二烯基)-双(取代苯甲酸)钼(Ⅳ)配合物的羰基和羟基振动频率的研究

本文研究了取代苯甲酸的羰基和羟基伸缩振动频率与苯环上取代基的Hammett常数σ值之间的线性关系;双(η~5-环戊二烯基)-双(取代苯甲酸)钼(Ⅳ)配合物[Cp_2Mo(O_2CC_6H_4X)_2](Cp=环戊二烯基;X=m-或p-NO_2、F、Cl、Bf、I、CH3、OCH_3、H)的羰基伸缩振动频率与取代基的σ值之间的线性关系,及Cp_2Mo(O_2CC_6H_4X)_2中苯甲酸根的配位方式。本文还提供了一个利用分辨率较低的仪器,比较精确地读出峰位的简便方法。     

Reactions of a platinum(III) dimeric complex with alkynes in water: novel approach to alpha-aminoketone, alpha-iminoketone, and alpha,beta-diimine via ketonyl-Pt(III) dinuclear complexes

Reaction of the platinum(III) dimeric complex [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(NO(3))(2)](NO(3))(2) (1), prepared in situ by the oxidation of the platinum blue complex [Pt(4)(NH(3))(8)((CH(3))(3)CCONH)(4)](NO(3))(5) (2) with Na(2)S(2)O(8), with terminal alkynes CH[triple bond]CR (R = (CH(2))(n)CH(3) (n = 2-5), (CH(2))(n)CH(2)OH (n = 0-2), CH(2)OCH(3), and Ph), in water gave a series of ketonyl-Pt(III) dinuclear complexes [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(2)COR)](NO(3))(3) (3, R = (CH(2))(2)CH(3); 4, R = (CH(2))(3)CH(3); 5, R = (CH(2))(4)CH(3); 6, R = (CH(2))(5)CH(3); 7, R = CH(2)OH; 8, R = CH(2)CH(2)OH; 9, R = (CH(2))(2)CH(2)OH; 10, R = CH(2)OCH(3); 11, R = Ph). Internal alkyne 2-butyne reacted with 1 to form the complex [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(CH(3))COCH(3))](NO(3))(3) (12). These reactions show that Pt(III) reacts with alkynes to give various ketonyl complexes. Coordination of the triple bond to the Pt(III) atom at the axial position, followed by nucleophilic attack of water and hydrogen shift from the enol to keto form, would be the mechanism. The structures of complexes 3.H(2)O, 7.0.5C(3)H(4)O, 9, 10, and 12 have been confirmed by X-ray diffraction analysis. A competitive reaction between equimolar 1-pentyne and 1-pentene toward 1 produced complex 3 and [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(2)CH(OH)CH(2)CH(2)CH(3))](NO(3))(3) (14) at a molar ratio of 9:1, suggesting that alkyne is more reactive than alkene. The ketonyl-Pt(III) dinuclear complexes are susceptible to nucleophiles, such as amines, and the reactions with secondary and tertiary amines give the corresponding alpha-amino-substituted ketones and the reduced Pt(II) complex quantitatively. In the reactions with primary amines, the once formed alpha-amino-substituted ketones were further converted to the iminoketones and diimines. The nucleophilic attack at the ketonyl group of the Pt(III) complexes provides a convenient means for the preparation of alpha-aminoketones, alpha-iminoketones, and diimines from the corresponding alkynes and amines.     

CH3--MoF], [CH2=MoHF], and [CH[triple bond]MoH2F] formed by reaction of laser-ablated molybdenum atoms with methyl fluoride: persistent photoreversible interconversion through alpha-hydrogen migration and agostic interaction

Simple molybdenum methyl, carbene, and carbyne complexes, [CH3--MoF], [CH2=MoHF], and [CH[triple chemical bond]MoH(2)F], were formed by the reaction of laser-ablated molybdenum atoms with methyl fluoride and isolated in an argon matrix. These molecules provide a persistent photoreversible system through alpha-hydrogen migration between the carbon and metal atoms: The methyl and carbene complexes are produced by applying UV irradiation (240-380 nm) while the carbyne complex is depleted, and the process reverses on irradiation with visible light (lambda>420 nm). An absorption at 589.3 cm(-1) is attributed to the Mo--F stretching mode of [CH3--MoF], which is in fact the most stable of the plausible products. Density functional theory calculations show that one of the alpha-hydrogen atoms of the carbene complex is considerably bent toward the metal atom (angle-spherical HCMo=84.5 degrees ), which provides evidence of a strong agostic interaction in the triplet ground state. The calculated C[triple chemical bond]Mo bond length in the carbyne is in the range of triple-bond values in methylidyne complexes.     

Synthesis,Crystal Structure of Cis—dioxo—catecholatotungsten（VI） Complex and Its NMR Studies on the Interaction with ATP

Cis-dioxo-catecholatotungsten(VI) complex anion[W^(VI)O2-(OC6H4O)2]^2- was obtained with discrete protonated ethylenediamine (NH2CH2CH2NH3)^ cations by the reaction of tetrabutyl ammonium decatungstate with catechol in the mixed solvent of CH3OH,CH3CN and ethylenediamine,and compared with its molybdenum anaogue [Mo^(V) O2(OC6H4O)2]^3- by crystal structure,UV,EPR,The results of the UV and EPR spectra show that tungsten is less redox active than molybdenum since the molybdenum is reduced from Mo(VI) to Mo(V) but tungsten stays in the original highest oxidized state Mo(VI) when they are crystallized from the solution above.It is worthy to note that [W^(VI)O2(OC6H4O)]^2- shows the same coordination structure as its molybdenum analogue in which the metal center exhibits distorted octahedral coordination geometry with two cis-dioxocatecholate ligands and might have the related coordination structure feature with the cofactor of flavoenzyme because [Mo^(V)O2(OC6H4O)2]^3- presented essentially the same EPR spectra as flavoenzyme.The NMR studies on the interaction of the title complex with ATP reveal that the reduction of W(VI) to W(V) occurs when the title complex is dissolved in D2O and the W(V) is oxidized again when ATP solution is mixed with original solution and the hydrolysis of the catecholato ligand take places at mean time being monitored by ^1H NMR and ^13C NMR spectra.     

Methane activation by laser-ablated V, Nb, and Ta atoms: Formation of CH3-MH, CH2=MH2, CHMH3-, and (CH3)2MH2

Methane activation by group 5 transition-metal atoms in excess argon and the matrix infrared spectra of reaction products have been investigated. Vanadium forms only the monohydrido methyl complex (CH3-VH) in reaction with CH4 and upon irradiation. On the other hand, the heavier metals form methyl hydride and methylidene dihydride complexes (CH3-MH and CH2=MH2) along with the methylidyne trihydride anion complexes (CHMH3-). The neutral products, particularly the methylidene complex, increase markedly on irradiation whereas the anionic product depletes upon UV irradiation or addition of a trace of CCl4 or CBr4 to trap electrons. Other absorptions that emerge on irradiation and annealing increase markedly at higher precursor concentration and are attributed to a higher-order product ((CH3)2MH2)). Spectroscopic evidence suggests that the agostic Nb and Ta methylidene dihydride complexes have two identical metal-hydrogen bonds.     

Dendronized scorpionate complexes of molybdenum in low and high oxidation states

Tridentate (L(3)) and bidentate (L(2)) poly(pyrazolyl)methane ligands (Gn-dend)OCH(2)C(pz)(3) (1-4) and (Gn-dend)CH(3,5-Me(2)pz)(2) (pz = pyrazol-1-yl) have been used to synthesize the molybdenum(0) complexes [Mo(CO)(3)(L(3))] (G0-G3, 5-8), [Mo(CO)(4)(L(2))] (G0-G1, 13-14), and [Mo(CO)(3)(NCMe)(L(2))] (G0, 15), and the molybdenum(VI) complexes [MoCl(2)O(2)(L(2))] (9-12). The G0-G3 prefixes represent the generation of poly(aryl ether) dendrons in which the metal complexes are embedded. The molecular structures of compounds 13 and 15 have been determined by X-ray diffraction studies and the hydrodynamic radii of tricarbonyl complexes 5-8 calculated by diffusion-ordered NMR spectroscopy (DOSY). Molybdenum(VI) compounds 9-12 have also been evaluated as catalysts for olefin epoxidation, showing comparable but inferior performances than ligand-free MoCl(2)O(2), probably because of the labile coordination of L(2).     

Synthesis, characterization and ethylene reactivity of 2-diphenylphosphanylbenzamido nickel complexes

Addition of primary amines to N-[2-(diphenylphosphanyl)benzoyloxy]succinimide affords 2-diphenylphosphanylbenzamides, Ph2PC6H4C(O)NHR (R = C(CH3)3, 3; R = H, 4; R = CH2CH2CH3, 5; R = CH(CH3)2, 6). Addition of NiCl(eta3-CH2C6H5)(PMe3) to the deprotonated potassium salts of the amides and subsequent treatment of two equivalents of B(C6F5)3 to the resulting products furnishes eta3-benzyl zwitterionic nickel(II) complexes, [Ph2PC6H4C(O)NR-kappa2N,P]Ni(eta3-CH2C6H5) (R = C6H5, 9; R = C(CH3)3, 10; R = H, 11; R = CH2CH2CH3, 12; R = CH(CH3)2, 13). Solid structures of 9, 11, 13 and the intermediate eta1-benzyl nickel(II) complexes, [Ph2PC6H4C(O)NR-kappa2N,P]Ni(eta1-CH2C6H5)(PMe3) (R = C6H5, 7; R = C(CH3)3, 8) were determined by X-ray crystallography. When ethylene is added to the eta3-benzyl zwitterionic nickel(II) complexes, butene is obtained by the complexes 9-12 but complex 13 provides very high molecular-weight branched polyethylene (Mw, approximately 1300000) with excellent activity (up to 5200 kg mol-1 h-1 at 100 psi gauge).     

氮、磷、碳化物比较研究初探

环保法规的日益严格使得研究者越来越重视新型加氢脱硫、脱氮催化剂的开发。国内外学者在对负载型Mo—Co、Mo—Ni和W—Ni等传统硫化物催化剂进行不断改进的同时,新型催化材料尤其是具有贵金属性质的过渡金属间充化合物一氮化物、碳化物和磷化物的研究也受到很大的关注。人们在探索不同的载体或者是不同的助剂对单金属间充化合物-氮化物、碳化物或磷化物催化剂活性组分的表面状态和结构以及其深度加氢脱硫脱氮性能的影响,而对同一载体负载的氮、磷、碳化物催化剂缺乏横向的比较。本研究制备了以γ-Al2O3为载体的负载型氮化钼、磷化钼和碳化钼催化剂,比较了它们的孔结构、比表面积,并初步分析了钼的质量分数为19％,氮化、磷化和碳化温度均为650℃时三类催化剂的二苯并噻吩加氢脱硫性能。     

Di-2-pyridyl ketone oxime in copper chemistry: di-, tri-, penta- and hexanuclear complexes

The use of di-2-pyridyl ketone oxime (Hpko)/X- "blends" (X- = OH-, Cl-, ClO4-) in copper chemistry has yielded neutral binuclear and cationic trinuclear, pentanuclear or hexanuclear complexes. Various synthetic procedures have led to the synthesis of compounds [Cu5(pko)7].[ClO4]3.2CH3OH.2H2O (1), [Cu3(pko)3(OH)(Cl)]2[Ph4B]2.4DMF.2H2O (2), [Cu2(pko)4] (3), {[Cu6(pko)6ClO4(CH3CN)6][Cu6(pko)6(ClO4)3(CH3CN)4]}.8ClO4.14CH3CN.H2O (4). The structures of the complexes have been determined by single-crystal X-ray crystallography.     

Syntheses, spectroscopies and structures of molybdenum(VI) complexes with homocitrate

Initial investigations into the possible role of homocitric acid in iron molybdenum cofactor (FeMo-co) of nitrogenase lead us to isolate and characterize two tetrameric molybdate(VI) species. The complexes K2(NH4)2[(MoO2)4O3(R,S-Hhomocit)2].6H2O (1) and K5[(MoO2)4O3(R,S-Hhomocit)2]Cl.5H2O (2) (homocitric acid = H4homocit, C7H10O7) are prepared from the reactions of acyclic homocitric acid and molybdates, which represent the first synthetic structural examples of molybdenum homocitrate complexes. The homocitrate ligand trapped by tetranuclear molybdate coordinates to the molybdenum(VI) atom through alpha-alkoxy and alpha-, beta-carboxy groups. The physical properties, structural parameters, and their possible biological relevances are discussed.     

Synthesis and properties of mononuclear and binuclear molybdenum complexes derived from bis(2-hydroxy-1-naphthaldehyde)oxaloyldihydrazone

The monomer molybdenum(VI) complex [MoO(2)(napoxlhH(2))].2H(2)O (1) has been synthesized from the reaction of MoO(2)(acac)(2) with bis(2-hydroxy-1-naphthaldehyde)oxaloyldihydrazone (napoxlhH(4)) in 1:1 molar ratio in ethanol under reflux. This complex on reaction with pyridine/3-picoline/4-picoline yielded the dimer molybdenum(VI) complexes [Mo(2)O(4)(napoxlhH(2))(2)(A)(2)].2H(2)O (A=py (2), 3-pic (3), 4-pic (4)), whereas reaction with isonicotinoylhydrazine (inhH(3)) and salicyloylhydrazine (sylshH(3)) lead to the reduction of the metal centre yielding monomeric molybdenum(V) complexes [Mo(napoxlhH(2))(hzid)].2H(2)O (where hzidH(3)=inhH(3) (5) and sylshH(3) (6)). The complexes have been characterized by elemental analyses, molecular weight determinations, molar conductance data, magnetic moment data, electronic, IR, ESR and (1)H NMR spectroscopic studies. The complexes (5) and (6) are paramagnetic to the extent of one unpaired electron. The electronic spectra of the complexes are dominated by strong charge transfer bands. In all of the complexes, the principal dihydrazone ligand has been suggested to coordinate to the metal centres in the anti-cis-configuration. The complexes (1), (5) and (6) are suggested to have six-coordinate octahedral stereochemistry around molybdenum(VI) and molybdenum(V) metal centres, respectively, while the complexes (2)-(4) are suggested to have eight coordinate dodecahedral stereochemistry around molybdenum(VI) metal centre.     

Trithio-chloro molybdate [MoClS3]-: a versatile precursor for molybdenum trisulfido complexes

The reaction of trithiomolybdate [PPh 4] 2[MoOS 3] ( 1) with 2 equiv of trimethylchlorosilane generated trithio-chloro molybdate [PPh 4][MoClS 3] ( 2) in high yield, by way of a siloxy complex [PPh 4][Mo(OSiMe 3)S 3] ( 3). This intriguing reaction provided us with a convenient entry into a series of mononuclear molybdenum trisulfido complexes, [PPh 4][MoS 3X] ( 4, X = Cp*; 6a, X = S (t) Bu; 6b, X = SPh; 6c, X = SMes (Mes = mesityl); 6d, X = STip (Tip = 2,4,6-triisopropylphenyl); 6e, X = SDmp (Dmp = 2,6-dimesitylphenyl); 7, X = NPh 2; 8a, X = O (t) Bu; 8b, X = OPh; 8c, X = OC(CH 2) (t) Bu; 8d, X = OC(CH 2)Ph), which were obtained by the reactions of 2 with the corresponding potassium salts. In a similar manner, a citrate complex [PPh 4][MoS 3(Me 3cit)] ( 9, Me 3cit = OC(CH 2CO 2Me) 2(CO 2Me)) was synthesized, which may model the molybdenum site of the nitrogenase FeMo-cofactor. The molecular structures of 2, 6c, 7, 8a, 8b, 8c, and 9 were determined by X-ray crystallography.     

Oxorhenium phosphinophenolato complexes with model peptide fragments: synthesis, characterization, and stability considerations

The synthesis and characterization of a series of mixed-ligand oxorhenium(V) complexes containing the o-diphenylphosphinophenolato ligand (HL) and model peptide fragments acting as the tridentate coligand are reported. Thus, by reacting equimolar amounts of tiopronin, Gly-Gly, Gly-L-Phe, or glutathione (GSH) peptides on the [(n-C4H9)4N][ReOCl3(L)] precursor in refluxing MeCN/MeOH or aqueous MeCN/MeOH mixtures, the following complexes were obtained: ReO([SC(CH3)CONCH2COO][L])[(n-C4H9)4N], 1, ReO([H2NCH2CONCH2COO][L]), 2, ReO)[H2NCH2CONCH(CH2C6H5)COO][L]), 3, and ReO([SCH2CH(NHCOCH2CH2CHNH2COOH)CONCH2COO][L])Na, 4. The compounds are closed-shell 18-electron oxorhenium species adopting a distorted octahedral geometry, as demonstrated by classical spectroscopical methods including multinuclear NMR. X-ray diffraction analyses for 1 and 2 are also reported. By comparative stability studies of complexes 1-3 against excess GSH it was shown that complex 3 containing the bulky C6H5CH2 substituent adjacent to the coordinated carboxylate group of Phe is the most stable complex.     

Ab initio study of the interaction of CHX3 (X = H, F, Cl, or Br) with benzene and hexafluorobenzene

In this paper, the results of a study of the interaction of methane, fluoroform, chloroform, and bromoform with benzene and hexafluorobenzene are presented. The benzene complexes were studied at the MP2/6-31G(d) and MP2/6-311++G(2d,p) levels, and the hexafluorobenzene complexes were only studied at the MP2/6-31G(d) level. The optimized geometries, stabilization energies, potential energy surfaces, harmonic frequencies, and vibrational intensities are reported. A net attraction is predicted for all four benzene complexes, whereas for the CHX3.C6F6 complexes, it was found that MP2/6-31G(d) predicts a net attraction for the CH4, CHCl3, and CHBr3 complexes and does not predict a stable complex for CHF3.C6F6. The three complexes with net attractions all have blue-shifts of the CHX3 CH stretching wavenumber and a slight contraction (0.001-0.003 A) of the CH bond in CHX3. The MP2/6-31G(d) level predicts that the intensity of the CHX3 CH stretch will vary widely. For CH4.C6H6 and CHF3.C6H6, it is predicted that the intensity will be smaller for the complexes than the free molecules, whereas for the other complexes, anywhere from a 30% increase to an increase of 87 times is predicted. The atoms in molecules analysis showed that only three of the eight criteria for normal hydrogen bonding are satisfied for all eight complexes studied. Criterion 3 (value of the Laplacian at the bond critical point) is not satisfied for any of the eight complexes.     

Diiron butane-2,3-dithiolate complexes with monophosphine coligands: synthesis,characterization, and electrochemistry

Transition Metal Chemistry - In this paper, three diiron butane-2,3-dithiolate complexes [Fe2(CO)5L{µ-SCH(CH3)CH(CH3)S}] [L?=?P(4-C6H4F)3, 2; P(4-C6H4OCH3)3, 3; P(3-C6H4Cl)3, 4]...