MICROPOROUS PVDF-HFP-BASED POLYMER MEMBRANES FORMED FROM SUPERCRITICAL CO2 INDUCED PHASE SEPARATION

Microporous poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP)membranes following supercritical CO_2 induced phase separation process were prepared using four solvents.The solid electrolytes of PVDF-HFP were formed by microporous PVDF-HFP membranes filled and swollen by a liquid electrolyte.The effect of the solvents on the morphology and structure,electrolyte absorptions and lithium ionic conductivity of the activated membranes were investigated.It was approved that all the membrane had the simi...     

Tailoring Morphology of PVDF-HFP Membrane via One-step Reactive Vapor Induced Phase Separation for Efficient Oil-Water Separation

Poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP) receives increasing attention in membrane separation field based on its advantages such as high mechanical strength, thermal and chemical stability. However, controlling the microporous structure is still challenging.In this work, we attempted to tailor the morphology of PVDF-HFP membrane via a one-step reactive vapor induced phase separation method.Namely, PVDF-HFP was dissolved in a volatile solvent and then was cast in an ammonia water vapor atmosphere. After complete evaporation of solvent, membranes with adjustable porous structure were prepared, and the microstructures of the membranes were analyzed by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and X-ray diffraction characterizations. Based on the results, a mechanism of dehydrofluorination induced cross-linking of PVDF-HFP has been suggested to understand the morphology tailoring.To our knowledge, this is the first report of one-step reactive vapor induced phase separation strategy to tailor morphology of PVDF-HFP membrane. In addition, the membranes prepared in the ammonia water vapor exhibited enhanced mechanical strength and achieved satisfactory separation efficiency for water-in-oil emulsions, suggesting promising potential.     

Effect of Polyvinylpyrrolidone on Separation Performance of Cellulose Acetate-Polysulfone Blend Membranes

Blend membranes comprising cellulose acetate and polysulfone (CA/PSf) were prepared through a solution casting method using a different concentration of polyvinylpyrrolidone (PVP) as the pore former. Fourier transform infrared spectroscopy (ATR-FTIR) was used to investigate structural properties of membranes. Membranes morphology and its thermal properties were characterized by scanning electron microscope (SEM) and thermogravimetric analysis (TGA). The strength of membranes was studied by mechanical stability. The effect of PVP concentration on separation performance of the prepared membranes was studied. The separation performance of prepared membranes was tested by using an aqueous solution of cadmium metal complexed with humic acid. The results showed that an increase in the PVP concentration in the cast film from 0 to 3 wt% increased the thermal stability, water content (%), pure water flux, and solute rejection. SEM results showed that the pore size decreased but the number of pores increased on an increase in the PVP concentration.     

A novel method for the pore size control of the battery separator using the phase instability of the ternary mixtures

The battery separator plays a key role in determining the capacity of the battery. Since separator performance mainly depends on the pore size of membrane, development of a technique for the fabrication of the membrane having controlled pore size is essential in producing a highly functional battery separator. In this study, microporous membranes having the desired pore size were produced via thermally‐induced phase separation (TIPS) process. Control of the phase boundaries of polymer‐diluent blends is the main concern in manipulating pore size in TIPS process, because pore size mainly depends on the temperature gap between phase separation temperature of the blend and the crystallization temperature of polymer. Microporous membranes having controlled pore size were produced from polyethylene (PE)/dioctyl phthalate (DOP) blends, PE/isoparaffin blends, and polymer/diluent‐mixture ternary blends, that is, PE/(DOP/isoparaffin) blends. PE/DOP binary blends and PE/(DOP/isoparaffin) ternary blends exhibited typical upper critical solution temperature (UCST) type phase behavior, while PE formed a homogeneous mixture with isoparaffin above the crystallization temperature of PE. When the mixing ratio of polymer and diluent‐mixture was fixed, the phase separation temperature of PE/diluent‐mixture blend first increased with increasing DOP content in the diluent‐mixture, went through a maximum centered at about 80 wt % DOP and then decreased. Furthermore, the phase separation temperatures of the PE/diluent‐mixture blends were always higher than that of the PE/DOP blend when diluent‐mixture contained more than or equal to 20 wt % of DOP. Average pore size of microporous membrane prepared from PE/DOP blend and that prepared from PE/isoparaffin blend were 0.17 and 0.07 μm, respectively. However, average pore size of microporous membrane prepared from ternary blends was varied from 0.07 to 0.5 μm by controlling diluent mixing ratio. To understand the phase behavior of ternary blend, phase instability of the ternary mixture was also explored. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2025–2034, 2006     

Study of the dependences of particle sizes in aqueous dispersions of sulfate lignin on pH by the filtration through track-etched membranes

Aggregation stability of low concentrations (10 mg/l) of aqueous dispersions of sulfate lignin is studied in a wide pH range (9.40–2.15) by filtration through track-etched membranes with pore sizes of 30–200 nm. It is shown that at all of the studied pH values, the solution of sulfate lignin is a polydisperse system. As pH decreases, the size of sulfate lignin particles increases, whereas the polydispersity of a system in the studied range of particles sizes (30–200 nm) decreases.     

Thermal degradation and crystallisation studies of reactively compatibilised polymer blends

The thermal degradation and crystallisation behaviours of polyamide12/isotactic polypropylene (PA12/PP) blends were studied. Effects of blend ratio and compatibiliser concentration on the thermal degradation properties of the blends were analysed. The activation energy for degradation in compatibilised and uncompatibilised blends computed using Horowitz-Metzger equation was reported. The blend ratio as well as the presence of compatibiliser has significant effect on the thermal stability of the blends. Phase morphology was found to be one of the decisive factors that affected the thermal stability of both uncompatibilised and compatibilised blends. Melting and crystallisation behaviours of the blends in the presence and absence of compatibiliser were evaluated. It was observed that blending has no significant effect on the melting and crystallisation properties of PA12 and PP. Compatibilisation of 70/30 and 50/50 PA12/PP blends didn't affect the crystallisation and melting behaviours of PA12 and PP even though some discrepancies were observed.     

Free volume hole size of Cyanate ester resin/Epoxy resin interpenetrating networks and its correlations with physical properties

Cyanate ester (CE) resin was blended with epoxy resin (EP) at different mass ratios (CE/EP: 100/0, 90/10, 70/30, 50/50, 30/70, 10/90, and 0/100). The curing process of the blend system was characterized by Fourier transform infrared spectrometry (FTIR) and differential scanning calorimetry (DSC). Examination of the mechanical properties, thermal stability, and morphology of the blend systems showed that addition of epoxy resin resulted in improved toughness but a little sacrifice in thermal stability when compared with neat CE. The free volume size of the blend system determined by positron annihilation lifetime spectroscopy (PALS) decreased with the epoxy resin content, which is consistent with the chemical structure changes for the copolymerization between CE and EP. The crosslinking units of curing products (oxazoline, oxazolidinone, and polyether network) of the blends are all smaller in size than those of triazine ring structure from neat CE. Therefore, the free volume size of the blends decreases with increase of EP content. The correlations between the free volume properties and other physical properties (thermal stability and mechanical properties) have also been discussed.     

Fabrication of porous collagen/chitosan scaffolds with controlling microstructure for dermal equivalent

Two sets of homemade apparatus have been utilized to fabricate collagen/chitosan porous membranes by quenching its acetic solution and subsequently extracting the solvent with ethanol. The influence of chitosan concentration on the surface morphology of the collagen/chitosan membranes was studied using a quenching cold plate (apparatus 1). The pore size was enlarged along with an increase in the chitosan content, accompanied with the emergence of a sheet‐like microstructure. Due to the large thermal conductivity of the membrane‐forming platform (stainless steel), collagen/chitosan membranes prepared using apparatus 1 at freezing temperature between ?60 to ?20 °C present similar pore size (2–4 nm) and surface morphology. However, a large difference in pore size is generated using apparatus 2 (membrane preparation in a cold ethanol bath) and using a membrane‐forming platform of poor thermal conductivity (polymethylmethacrylate), e.g. ～10 to 20 μm at freezing temperature of ?60 to ?40 °C, and 265 μm at ?20 °C accompanied with the transformation from fiber‐ to sheet‐dominated morphology. The spongy collagen/chitosan membranes with pore sizes ranging from tens to hundreds of micrometers and porosity higher than 95%, which could be used as dermal regeneration template, have thus been fabricated. Copyright © 2003 John Wiley & Sons, Ltd.     

Effect of poly(vinyl acetate) (PVAc) on thermal behavior and mechanical properties of poly(3-hydroxybutyrate)/poly(propylene carbonate) (PHB/PPC) blends

To assess the compatibility of blends of synthetic poly(propylene carbonate) (PPC), with a natural bacterial poly(3-hydroxybutyrate) (PHB), a simple casting procedure of blend was used. poly(3-hydroxybutyrate)/poly(propylene carbonate) blends are found to be incompatible according to DSC and DMA analysis. In order to improve the compatibility and mechanical properties of PHB/PPC blends, poly(vinyl acetate) (PVAc) was added as a compatibilizer. The effects of PVAc on the thermal behavior, morphology, and mechanical properties of 70PHB/30PPC blend were investigated. The results show that the melting point and the crystallization temperature of PHB in blends decrease with the increase of PVAc content in blends, the loss factor changes from two separate peaks of 70PHB/30PPC blend to one peak of 70PHB/30PPC/12PVAc blend. It is also found that adding PVAc into 70PHB/30PPC blend can decrease the size of dispersed phase from morphology analysis. The result of tensile properties shows that PVAc can increase the tensile strength and Young’s modulus of 70PHB/30PPC blend, and both the elongation at break and the tensile toughness increase significantly with PVAc added into 70PHB/30PPC.     

溶胶凝胶法合成聚酰亚胺二氧化钛杂化膜

溶胶凝胶法制备了负载型聚酰亚胺 二氧化钛杂化膜 ,采用扫描电镜、红外光谱、TG DTA、压汞法和气体渗透性能测试装置对膜材料的表面形貌、表面结构、热性能、孔径分布和气体渗透性能进行了表征 .结果表明 ,杂化膜材料形成了有机相包裹无机相的交联结构 ;聚酰亚胺与二氧化钛粒子形成了新型键联结构 ;其热分解温度随二氧化钛含量的增加而降低 ,在 4 5 0℃以下热稳定性优于聚酰亚胺膜材料 ;平均孔径随二氧化钛含量增大而增大 ,孔径分布趋于弥散 ;N2 、H2 和CO2 在膜内渗透由Knudsen扩散控制 ,H2 O N2 分离因子均大于Knudsen扩散值 ,表现出良好的亲水性 .     

ZIF-67@Cellulose nanofiber hybrid membrane with controlled porosity for use as Li-ion battery separator

Zeolitic imidazolate framework-67(ZIF-67) was synthesized on the surface of cellulose nanofibers(CNFs)in methonal to address the problems of unhomogeneous pore size and pore distribution of pure CNF membrane.A combination of Energy Dispersive X-Ray Spectroscopy(EDS),X-ray photoelectron spectroscopy(XPS) and X-ray powder diffraction(XRD) patterns were used to determine the successful synthesis of ZIF-67@CNFs.The size of the ZIF-67 particles and pore size of the ZIF-67@CNF membrane were50-200 nm and 150-350 nm, respectively.The prepared ZIF-67@CNF membrane exhibited excellent thermal stability,lower thermal shrinkage and high surface wettability.The discharge capacity retention of the Li-ion batteries(LIBs) made with ZIF-67@CNF,glass fiber(GF),CNF and commercial polymer membranes after 100 th cycle at 0.5 C rate were 88.41%,86.22%,83.27%,and 81.03%,respectively.LIBs with ZIF-67@CNF membrane exhibited a better rate capability than these with other membranes.No damage of porous structure or peel-off of ZIF-67 was observed in the SEM images of ZIF-67@CNF membrane after100 th cycle.The improved cycling performance,rate capability,and good electrochemical stability implied that ZIF-67@CNFs membrane can be considered as a good alternative LIB separator.     

PREPARATION AND ELECTROCHEMICAL CHARACTERISTICS OF POLYMER ELECTROLYTE MEMBRANES BASED ON SAN/PVDF-HFP BLENDS

A copolymer of poly(acrylonitrile-co-styrene) (SAN) was synthesized via an emulsion polymerization method. Novel polymer electrolyte membranes cast from the blends of poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP), SAN and fumed silica (SiO2) are microporous and can be used in polymer lithium-ion batteries. The membrane shows excellent characteristics such as high ionic conductivity and good mechanical strength when the mass ratio between SAN and PVDF-HFP and SiO2 is 3.5/31.5/5. The ionic conductivity of the membrane soaked in a liquid electrolyte of 1 mol/L LiPF6/EC/DMC/DEC is 4.9×10-3 S cm-1 at 25℃. The membrane is electrochemical stable up to 5.5 V versus Li /Li in the liquid electrolyte. The influences of SiO2 content on the porosity and mechanical strength of the membranes were studied. Polymer lithium-ion batteries based on the membranes were assembled and their performances were also studied.     

增容剂SB对LDPE/PS共混物形态的影响

研究了不同温度和转速下苯乙烯 -丁二烯二嵌段共聚物 (SB)低密度聚乙烯 聚苯乙烯共混物形态和分散相颗粒尺寸的影响。结果表明 ,未加入SB的共混物在 1 50℃时的分散相颗粒尺寸比 2 0 0℃粗大 ,形态极不规则 :加入SB的共混物在 1 50℃时颗粒尺寸比 2 0 0℃时稍小 ,但形态变化不大。在 1 50℃ ,转速从 3 0r min至 1 0 0r min时 ,未加入SB的共混物的分散相颗粒尺寸迅速减小 ,而加入SB的共混物在 3 0r min时达到平衡颗粒尺寸 ,继续增加转速 ,形态和颗粒尺寸没有明显变化。     

离子液体凝胶聚合物电解质的三元组分相互作用研究

采用Raman光谱、傅里叶转换红外光谱和X-射线衍射光谱研究N-甲基-N-丙基哌啶双三氟甲磺酸亚胺离子液体（PP13TFSI）和双三氟甲磺酸亚胺锂盐（LiTFSI）对PVDF-HFP聚合物聚合方式的影响,结果表明,PP13TFSI、LiTFSI和PVDF-HFP是共混存在的,同时加入PP13TFSI和LiTFSI会使聚合物的聚合方式由晶体结构转变为无定形结构. 通过对电解质及其各组分的线性扫描伏安曲线和热重曲线分析可知,溶剂N-甲基吡咯烷酮（NMP）容易残留在凝胶聚合物电解质（ILGPE）中,这会降低ILGPE的电化学稳定性和热稳定性. 作者对固态LiFePO₄|ILGPE|Li电池的倍率性能进行了研究,实验结果表明其具有较好的倍率性能,当电池倍率由C/10增大至2C,然后再回到C/10时,其容量可以恢复到原来的90.9%左右. 该研究结果对理解PP13TFSI和LiTFSI在ILGPE中的作用机理具有重要的意义.     

磷酸锆镍的微波制备及其可见光光催化性能

以氧氯化锆、氯化镍和磷酸二氢钠为原料,在较低温度和常压条件下采用微波辅助法制备具有特殊形貌的磷酸锆镍NiZr(PO_4)_2·4H_2O。研究了3种不同种类的表面活性剂对磷酸锆镍的物相、尺寸及形貌的影响。结果表明,表面活性剂的引入可以降低磷酸锆镍颗粒的平均粒径。与十二烷基硫酸钠(SDS)相比,聚乙烯吡咯烷酮K30(PVP-K30)和十六烷基三甲基溴化铵(CTAB)对颗粒生长的抑制程度更大,从而产物的平均粒径更小。使用亚甲基蓝(MB)溶液模拟印染废水,对磷酸锆镍的光催化降解性能进行了探讨。结果表明,可见光下以PVP-K30为模板制备的磷酸锆镍对MB的表观脱色率为49.0%,优于CTAB和SDS条件下制备的磷酸锆镍。本文为新型磷酸锆类复盐的制备与应用研究提供了新的思路和方法。     

一种新型凝胶态聚合物电解质的制备和性能

采用一种新型胶联剂新戊二醇二丙烯酸酯(noepentyl glycol diacrylate, NPGDA)和聚偏氟乙烯-六氟丙烯(poly(vinylidene fluoride-co-hexafluoropropylene), PVDF-HFP), 液态电解液组成电解质混合溶液, 然后加入引发剂并加热引发聚合反应制备了一种具有互穿聚合物网络结构的凝胶态聚合物电解质, 可以用于制备聚合物锂离子二次电池. 考察了不同PVDF-HFP/NPGDA质量比对凝胶态聚合物电解质性能的影响. 结果表明, PVDF-HFP/NPGDA质量比可以影响凝胶态聚合物电解质的结构形貌、电化学特性以及聚合物锂离子二次电池的性能. 研究发现, 当m(PVDF-HFP)/m(NPGDA)＝1:1时制备的凝胶态聚合物电解质具有较高的离子电导率和电化学稳定窗口, 室温下分别为6.99×10^-3 S•cm^-1和4.8 V(vs Li⁺/Li), 以其为电解质制备的聚合物锂离子二次电池具有较好的电化学性能.     

Effect of polyaniline (PANI) on Poly(vinylidene fluoride-co-hexaflouro propylene) (PVDF-co-HFP) polymer electrolyte membrane prepared by breath figure method

Poly(vinylidene fluoride-co-hexaflouro propylene) is a well-known material for polymer electrolyte membranes (PEMs) due to its low cost, high mechanical integrity and excellent chemical resistance; however, its pure form has limited characteristics that require further modification to achieve optimum results. Therefore, the different dosages of polyaniline (PANI) (10 wt%, 20 wt%, 30 wt%, 40 wt% and 50 wt%) were incorporated into PVDF-HFP blend to fabricate PVDF-HFP/PANI polymer electrolyte membrane by using breath-figure method. The FTIR peaks of PVDF-HFP and PVDF-HFP/PANI membrane confirms the successful incorporation of PANI into PVDF-HFP blend, while TGA, DSC and XRD analysis shows the PANI effect on stability and ionic conductivity of PVDF-HFP membrane. The PVDF-HFP/PANI membrane with 30 wt% PANI found superior with the highest porosity of 83%, electrolyte uptake of 270% and ionic conductivity of 1.96 mS cm⁻¹; however, the other concentrations of PANI were also effective and enhanced the performance of PVDF-HFP membrane. This shows the improved performances of PVDF-HFP membrane were attributed to successful incorporation of PANI and the proposed membrane can be a suitable alternative PEM or a separator for energy devices.     

Properties of immiscible and ethylene-butyl acrylate-glycidyl methacrylate terpolymer compatibilized poly (lactic acid) and polypropylene blends

Poly(lactic acid) (PLA) and polypropylene (PP) blends of various proportions were prepared by melt-compounding. The miscibility, phase morphology, thermal behavior, and mechanical and rheological properties of the blends were investigated. The blends were immiscible systems with two typical morphologies, spherical droplet and co-continuous, and could be obtained at various compositions. Complex viscosity, storage modulus and loss modulus depend on the PP content. Thermal degradation of all blends led to two weight losses, for PLA and PP. The incorporation of PP improved the thermal stability of the blend. The effect of compatibilizer (ethylene-butyl acrylate-glycidyl methacrylate terpolymer, EBA-GMA) on the morphology and mechanical properties of 70/30 w/w PLA/PP blends was investigated. The tensile strength of these blends reached a maximum for 2.5 wt% EBA-GMA, and impact strength increased with increasing EBA-GMA content, suggesting that EBA-GMA is an effective compatibilizer for PLA/PP blends.     

Sodium Alginate and Poly(ethylene glycol) Blends: Thermal and Morphological Behaviors

Sodium alginate (SA) was blended with varying amounts of poly(ethylene glycol) (PEG) viz., 10, 20, 30, 40 and 50 wt % by using water as a solvent. The obtained SA/PEG blends have been characterized for thermal behavior by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) and surface morphology by scanning electron microscopic (SEM) methods. DSC analysis indicates the increase in glass transition temperature (T_g) of the blends with an increase in PEG content in the blend, which is due to chain entanglement. TGA results reveal the enhancement of thermal stability of SA/PEG blends in terms of the onset of degradation and percentage of weight loss. SEM photomicrographs shows the two phase morphology. This result indicates the immiscible nature of the SA/PEG blends.     

Thermal and Morphological Studies on Poly(Methyl Methacrylate)/Thermoplastic Polyurethane Blends

Poly(methyl methacrylate) (PMMA) and thermoplastic polyurethane (TPU) blends in different compositions viz., 95/05, 90/10, 85/15 and 80/20 (by wt/wt% of PMMA/TPU) have been prepared by melt mixing using a twin screw extruder. The thermal stability of these blends has been characterized by thermogravimetric (TG) analysis. All the blends are stable up to 381°C and complete degradation occurs at 488°C. A slight improvement in thermal stability was noticed with an increase in TPU content in the blends. Surface morphology of the blends has been studied by an optical microscope. Optical microphotographs revealed two‐phase morphology for all the blends.