分离扇回旋加速器磁通道的复测安装

由于空间狭小且不能通视,分离扇回旋加速器的检修与准直复位一直困扰着机械准直人员。加上时间紧张,如何快速准确找到故障原因和准确复位是保证加速器正常运行所必须思考的问题。分析了磁通道的工作原理和传动机制,建立了有效的传动监测模型,标定并改善了电机的传动性能。基于多重坐标系转换总结出一种快速安装的方法,快速复位精度满足物理要求,保证束流的顺利引出。该方法精度满足实验要求(不超过0.2 mm),具有可继承性,能够为相关加速器类似元器件的检修与准直工作提供依据。     

Improvement of algorithms for digital real-time n-γ discrimination

Three algorithms(the Charge Comparison Method,n-γ Model Analysis and the Centroid Algorithm)have been revised to improve their accuracy and broaden the scope of applications to real-time digital n-γ discrimination.To evaluate the feasibility of the revised algorithms,a comparison between the improved and original versions of each is presented.To select an optimal real-time discrimination algorithm from these six algorithms(improved and original),the figure-of-merit(FOM),Peak-Threshold Ratio(PTR),Error Probability(EP) and Simulation Time(ST) for each were calculated to obtain a quantitatively comprehensive assessment of their performance.The results demonstrate that the improved algorithms have a higher accuracy,with an average improvement of 10%in FOM,95%in PTR and 25%in EP,but all the STs are increased.Finally,the Adjustable Centroid Algorithm(ACA) is selected as the optimal algorithm for real-time digital n-γ discrimination.     

Application of pulse shape discrimination in Si detector for fission fragment angular distribution measurements

Pulse shape discrimination (PSD) with totally depleted transmission type Si surface barrier detector in reverse mount has been investigated to identify fission fragments in the presence of elastic background in heavy ion-induced fission reactions by both numerical simulation and experimental studies. The PSD method is compared with the other conventional methods adopted to identify fission fragments with solid-state detectors such as ΔE–E telescope and single thin ΔE detector and the data for the¹⁰B +²³²Th fission reaction are presented. Results demonstrate the usefulness of a single transmission-type surface barrier detector for the identification of fission fragments and projectiles like heavy ions     

基于MSE模型的高分辨率遥感图像变化检测

目前,传统高光谱分辨率遥感图像变化检测方法大多基于单一特征信息进行处理,没有综合影像所有特征信息,难以检测出完整的变化信息。为此,提出了一种基于多特征流形嵌入模型（multiview spectral embedding, MSE）的高分辨遥感图像变化检测方法,利用该模型对图像特征变化信息向量中所有的变化信息进行融合,获得完整的检测结果。实验结果表明,本文方法的检测精度好于传统的变化检测方法,并且稳定性良好。     

时延估计与双线阵左右舷分辨

针对双线列阵的左右舷分辨问题，特别是双线阵间距较大时的左右舷分辨问题，文中提出了一种以时延估计为理论基础的左右舷分辨方法，将双线阵的左右舷分辨问题转变成对轴向对称的两路波束信号进行时延估计，然后根据时延值的符号判断出目标所处的左右舷。该方法具有算法简单、对阵形畸变不敏感的优点。经过湖试实验数据分析验证，证明是一种简单、有效、可行的左右舷分辨技术。     

本舰机动左右舷分辨方法研究

针对传统单根线列阵的左右舷分辩问题，经过深入分析，给出了本舰机动左右舷分辨方法中的一些影响因素，并对机动角度和滞后时间得出了定量结论。文中研究的内容对传统拖曳线列阵声纳的左右舷分辨和战术使用具有参考价值。     

拖船噪声抵消与左右舷分辨联合处理方法的研究

利用拖曳双线阵声纳基阵结构的左右舷分辨能力,并结合拖船相对于拖曳线列阵的空间位置关系,本文提出一种拖船噪声抵消与左右舷分辨联合处理的方法,在波束域分别形成左右波束并将映像波束相减,在检测目标并进行左右分辨的同时,可以显著抵消拖船噪声。海试结果验证了该方法的有效性,拖船噪声被抑制掉约14dB,同时正确分辨出目标的左右舷方位。     

Photon discrimination simulation with the PCA method

The shower shape of n,n,p,p,K+,π+ and photons,generated by JPCIAE code for 5.5 TeV/A 208Pb+208Pb collisions,incident on the ALICE photon spectrometer(PHOS),is analyzed with the principal component analysis(PCA) method.The efficiency dependence of purity for the photon discrimination is simulated for the deposited energy ranges 0.5-2 GeV,2-10 GeV,10-50 GeV and 50-100 GeV.The result shows that in the energy range of 0.5 to 100 GeV,the efficiency of the photon identification can reach 90% with purity of 90%.     

用PCA方法模拟光子鉴别

The shower shape of n, n^-, p, p^-, K^＋, π^＋ and photons, generated by JPCIAE code for 5.5 TeV/A ^208pb＋^208pb collisions, incident on the ALICE photon spectrometer （PHOS）, is analyzed with the principal component analysis （PCA） method. The efficiency dependence of purity for the photon discrimination is simulated for the deposited energy ranges 0.5-2 GeV, 2-10 GeV, 10-50 GeV and 50-100 GeV. The result shows that in the energy range of 0.5 to 100 GeV, the efficiency of the photon identification can reach 90% with purity of 90%.     

Development of highly potent chiral discrimination methods that solve the problems of the diastereomer method

The development of highly potent chiral discrimination methods that solve the problems of the diastereomer method, in which it is impossible to discriminate the diastereomers having chiral centers separated by more than four bonds, is described. On the basis of the results obtained, a new hypothesis, Induced Chiral Fields that the achiral reversed phase can provide chiral fields depending on the structures of the eluents, is proposed to explain the significant results of separation of the diastereomers derived from newly developed chiral and fluorescent labeling reagents and optical isomers by reversed-phase HPLC, which was hitherto impossible.     

The role of pitch in the discrimination of voice quality

Pitch is an important attribute of a musical sound. With it the melody of a song is established. With it the beauty of a voice is showcased. But how does pitch affect the perception of voice? Is it used to help to distinguish among voices or does it merely exist in the background, affecting the fine details of a voice but not radically altering the voice? The purpose of this paper is to review some of the evidence on the role of pitch in the perception of voice quality; specifically for the discrimination of one voice quality from another. The objective of the discussion is to understand how pitch affects our perception of voice quality and its importance to the perception of musical sound.     

基于阵形畸变补偿的多线阵左右舷分辨研究

多线阵可解决单线阵在目标探测中的左右舷分辨模糊问题,但阵形畸变不利于准确实现对目标的左右舷分辨。本文针对多线阵在拖曳过程中出现的典型阵形畸变,定量地分析了其对目标左右舷分辨的影响,并提出了一种基于阵形畸变实时测量补偿来进行目标左右舷分辨的方法,海上实验数据分析结果表明,该方法可实现阵形畸变下的目标左右舷分辨,对于提高拖曳多线阵声纳性能具有参考价值。     

线性光学实现量子普适确切态识别

给出一种量子普适确切态识别的线性光学实现方案.此方案只用到双光子的干涉和符合测量,在实验上是简单可行的.同时提出一种改进方案,通过一定量的辅助光子,使得上述方案成功概率得以提高.这一方案将可应用于量子密钥分配等安全信息交流中. 关键词： 确切态识别 线性光学     

Detection of Internal Defects in Concrete and Evaluation of a Healthy Part of Concrete by Noncontact Acoustic Inspection Using Normalized Spectral Entropy and Normalized SSE

Non-destructive testing, with non-contact from a remote location, to detect and visualize internal defects in composite materials such as a concrete is desired. Therefore, a noncontact acoustic inspection method has been studied. In this method, the measurement surface is forced to vibrate by powerful aerial sound waves from a remote sound source, and the vibration state is measured by a laser Doppler vibrometer. The distribution of acoustic feature quantities (spectral entropy and vibrational energy ratio) is analyzed to statistically identify and evaluate healthy parts of concrete. If healthy parts in the measuring plane can be identified, the other part is considered to be internal defects or an abnormal measurement point. As a result, internal defects are detected. Spectral entropy (SE) was used to distinguish between defective parts and healthy parts. Furthermore, in order to distinguish between the resonance of a laser head and the resonance of the defective part of the concrete, spatial spectral entropy (SSE) was also used. SSE is an extension of the concept of SE to a two-dimensional measuring space. That is, based on the concept of SE, SSE is calculated, at each frequency, for spatial distribution of vibration velocity spectrum in the measuring plane. However, these two entropy values were used in unnormalized expressions. Therefore, although relative evaluation within the same measurement surface was possible, there was the issue that changes in the entropy value could not be evaluated in a unified manner in measurements under different conditions and environments. Therefore, this study verified whether it is possible to perform a unified evaluation for different defective parts of concrete specimen by using normalized SE and normalized SSE. From the experimental results using cavity defects and peeling defects, the detection and visualization of internal defects in concrete can be effectively carried out by the following two analysis methods. The first is using both the normalized SE and the evaluation of a healthy part of concrete. The second is the normalized SSE analysis that detects resonance frequency band of internal defects.     

双线阵目标左右舷分辨概率分析

基于二元假设检验理论,研究了双线列阵对目标方位左右舷分辨的正确和错误概率。根据阵列接收窄带信号的概率密度函数,定义了左右舷判决统计量,当信号快拍数足够大时,左右舷判决统计量接近正态分布,从而可得到窄带信号的左右舷分辨概率。利用子带信号左右舷分辨概率的频率加权或波束加权,得到频率或波束加权的宽带信号左右舷分辨概率。理论和数值分析表明,窄带信号的左右舷分辨概率取决于双阵间距,而宽带信号的左右舷分辨概率对阵间距的宽容性较大。     

基于积分球的人眼辨色阈值的研究

为了研究人眼对不同的颜色的辨色阈值,利用积分球配出色差值可以调整的颜色刺激图样,采用限定法,检测出6名色觉正常的观察者在4个颜色中心的辨色阈值,并和CRT的数据进行比较。采用性能因子PF/3分析观察者的测试精度,并在a*b*图上绘制实验颜色恰可辨别图。通过对实验数据进行处理和分析,人眼在4个颜色中心的辨色阈值是有差异,在评价辨色阈值的性能方面,CIEDE2000色差公式好于CIELAB色差公式。实验的结果可为颜色科学及色差公式的改进和发展提供参考。     

确定单光子计数系统中最佳甄别电压的实验研究

在光电倍增管相关理论的基础上从改变功率、积分时间、减光片、阴极电子加速电压等方面,通过实验利用Matlab软件对曲线进行拟合,通过该方法得到了光子计数率与功率、信噪比与功率、信噪比与积分时间之间的关系以及光电倍增管的相关特性.最后确定了单光子计数系统中最佳甄别电压的具体方法.     

Corelli: Efficient single crystal diffraction with elastic discrimination

Single crystal diffuse scattering provides one of the most powerful probes of short-range correlations on the 1–100 nm scale, which often are responsible for the extreme field response of many emerging phenomena of great interest. Accurate modeling of such complex disorder from diffuse scattering data however puts stringent experimental demands, requiring measurements over large volumes of reciprocal space with sufficient momentum and energy resolution. Here, we discuss the potential of the cross-correlation technique for efficient measurement of single crystal diffuse scattering with energy discrimination, as will be implemented in a novel instrument, Corelli. Utilizing full experiment simulations, we show that this technique readily leads up to a fifty-fold gain in efficiency, as compared to traditional methods, for measuring single crystal diffuse scattering over volumes of reciprocal space with elastic discrimination.      

组合式Si-PIN 14 MeV中子探测器

提出了一种在多片Si-PIN探测器中间用2mm厚的聚乙烯作为灵敏度增强介质,采用加法电路模式进行信号输出的组合式新型DT聚变中子(14MeV)探测技术原理. 这种组合的主要特点有： 1)大幅度提高了Si-PIN探测器的中子灵敏度和测量统计性; 2)提高了探测器的n/γ分辨本领; 3)在实现多个探测器信号相加的同时,组合探测器相对于单片探测器时间响应没有明显改变. 从实验及理论上对组合探测器的14MeV中子及1.25MeV γ灵敏度、n/γ分辨,时间特性和测量统计性进行了研究. 关键词： Si-PIN半导体探测器 灵敏度 n/γ分辨 时间响应     

Quantum process discrimination with information from environment

In quantum metrology we usually extract information from the reduced probe system but ignore the information lost inevitably into the environment. However, K. Mølmer[Phys. Rev. Lett. 114, 040401 (2015)] showed that the information lost into the environment has an important effect on improving the successful probability of quantum process discrimination. Here we reconsider the model of a driven atom coupled to an environment and distinguish which of two candidate Hamiltonians governs the dynamics of the whole system. We mainly discuss two measurement methods, one of which obtains only the information from the reduced atom state and the other obtains the information from both the atom and its environment. Interestingly, for the two methods the optimal initial states of the atom, used to improve the successful probability of the process discrimination, are different. By comparing the two methods we find that the partial information from the environment is very useful for the discriminations.