Structural evolution of silicone oil liquid exposed to Ar plasma

Structure properties of silicone oil serving as a liquid substrate exposed to Ar plasma are investigated in this paper. Under the action of energetic Ar ions, the surface of silicone oil liquid substrate exhibits a branch-like fractal aggregation structure, which is related to the structure evolution of silicone oil liquid from Si--O chain to Si--O network. The radicals from the dissociation of silicone oil molecule into the Ar plasma turns the plasma into a reactive environment. Therefore, the structural evolution of silicone oil liquid substrate and the reactive radicals in the plasma space become possible factors to affect the aggregation of nanoparticles and also the structures and the compositions of nanoparticles.     

Photoluminescence of amorphous carbon films fabricated by layer—by—layer hydrogen plasma chemical annealing method

A method in which nanometre-thick film deposition was alternated with hydrogen plasma annealing (layer-by-layer method) was applied to fabricate hydrogenated amorphous carbon films in a conventional plasma-enhanced chemical vapour deposition system.It was found that the hydrogen plasma treatment could decrease the hydrogen concentration in the films and change the sp^2/sp^3 ratio to some extent by chemical etching.Blue photoluminescence was observed at room temperature,as a result of the reduction of sp^2 clusters in the films.     

Qualitative and quantitative assessment of extracted oil from Camelina sativa seed treated by dielectric-barrier discharge cold plasma

This study aimed to investigate the effects of dielectric-barrier discharge (DBD) cold plasma (CP) pretreatment on Camelina sativa “Soheil cultivar” seed. A DBD plasma reactor system was employed for this purpose. The experiments were performed by taking into account variables including voltages of 15, 18, and 21 kV and times of 2, 4, 8, and 16 min. The measured properties were oil yield extraction (%), oil colour parameters (CIEL*a*b*), protein content (meal) (%), surface analysis using Scanning Electron Microscopy (SEM), and fatty acids profile of Camelina sativa. The results revealed that the CP treatment had a significant improvement in different properties of the extracted oil. It was observed that the extracted oil was increased, with the increasing time of CP exposure. The treatments of CP enhanced the oil yield from 24.3 to 31.5%, and the optimal conditions were identified as 21 kV and 16 min. Also, the maximum protein amount was observed for the samples treated by CP (39.5%). The SEM analysis showed that the cell structures of pre-treated Camelina samples were damaged, thereby improved the oil extraction efficiency. The variations in the values of L*, a*, and b* (max-min) were calculated to be 3.9, −2.5, and 9.7, respectively, which indicated minor changes of CP treatment on the oil colour parameters. The treated samples showed considerable changes of enhancement in linolenic and linoleic acids among poly-unsaturated fatty acids; and a reduction in palmitic acid content, among saturated fatty acids.     

�����赲�ŵ�������������ͷ�Ӧ���о�

分别采用空气、氩气大气压介质阻挡放电(DBD)等离子体对重油进行了处理.对经空气DBD等离子体处理后的重油进行粘温特性分析,发现重油粘度升高,流动性变差.红外光谱和四组分分析结果表明重油的重质组分含量升高,重油胶体体系被破坏,同时生成大量刺激性气味气体.为了便于分析气态产物的成分和含量,采用大气压氩气DBD等离子体处理重油并收集气体产物.气相色谱分析发现生成气中含有大量C1-C5的烃类和一定量氢气,其中氢气和甲烷含量占生成气的70％以上.实验结果表明重油在等离子体作用下既发生裂解又发生聚合反应,既生成低碳烃类,本身的流动性也变差.     

MPD掺杂的共聚合物薄膜的发光特性

研究了由噻吩乙烯发色团单元和惰性寡甲撑单元组成的交替嵌段合物与小分子量染料[2-methyl-6[(2,3,6,7-tetrahydro-1H,5H-benxo[ij]quinolixin-q-yl)ethenyl]-4H－pylidenes]－丙烷二腈（MPD）共混物薄膜的光致发光。这种共混物在645nm处产生增强的红光发射。发射增强的部分原因是来源于晶化共聚合物与染料之间有效的能量传递。     

原位等离子体逐层氧化a-Si:H/SiO2多层膜的光致发光研究

采用在等离子体增强化学汽相沉积系统中沉积a-Si:H和原位等离子体逐层氧化的方法制备a-Si:H/SiO2多层膜.改变a-Si:H层的厚度，首次在室温下观察到来自a-Si:H/SiO2多层膜较强的蓝色光致发光和从465到435nm的蓝移.x射线能谱证明，SiO2层是化学配比的SiO2；C-V特性表明，a-Si:H/SiO2界面得到了很好的钝化；透射电子显微镜表明，样品形成了界面陡峭的多层结构.结合光吸收谱和光致发光谱的研究，对其发光机理进行了讨论.用一维量子限制模型对光致发光峰随着a-Si:H层厚度的减小 关键词： a-Si:H/SiO2多层膜 光致发光     

有序结构氟聚合物压电驻极体的制备和压电性研究

描述了一种有序微孔结构压电聚合物功能膜的制备方法,利用模板的高度有序实现薄膜微孔结构的精确控制.将此制备方法用于氟聚合物压电驻极体薄膜的制备,通过扫描电子显微镜(SEM)对其微观结构的观察表明薄膜具有理想的有序结构.对氟聚合物压电驻极体压电性的研究则是利用正压电效应测量准静态压电系数d₃₃,通过等温衰减和压强依赖性的测量考察其压电性能.结果表明:有序结构氟聚合物压电驻极体的准静态压电系数d₃₃可高达300 pC/N;与无序结构氟聚合物     

水热合成碳颗粒的结构和发光性能

用生物试剂氨基葡萄糖盐酸盐和葡萄糖在水溶液中合成了碳颗粒,用场发射扫描电子显微镜、高分辨透射电子显微镜、显微Raman光谱仪和傅立叶红外光谱仪对样品的结构和组成进行了研究。结果表明,碳颗粒是球形非晶结构,直径为0.3~1.4μm。利用He-Cd激光器的325 nm线,在显微Raman光谱仪中对碳颗粒的光致发光(PL)性能进行了研究。光谱显示出中心在420 nm的弱的蓝色PL带、中心在575 nm和650 nm的强而宽的绿光和红光PL带,它们分别与官能团和带与带之间的跃迁有关。绿光和红光PL带的宽化与sp2碳颗粒的非均匀性有关。     

Photoluminescence quenching of porous silicon by noble metal adsorbates

Ｐｈｏｔｏｌｕｍｉｎｅｓｃｅｎｃｅ ｑｕｅｎｃｈｉｎｇ ｏｆ ｐｏｒｏｕｓ ｓｉｌｉｃｏｎ ｂｙ ｎｏｂｌｅ ｍｅｔａｌ ａｄｓｏｒｂａｔｅｓ￥ＧＵＯＨｅｎｇｑｕｎ（ＤｅｐａｒｔｍｅｎｔｏｆＡｐｐｌｉｅｄＰｈｙｓｉｃｓ，ＨｕａｑｉａｏＵｎｉｙｅｒｓｉ...     

锥形碳氮结构的发光性能

利用偏压增强化学气相沉积系统,以CH4、H2和NH3为反应气体,分别在沉积有钛膜和碳膜的Si衬底上制备锥形碳结构,并用扫描电子显微镜、X射线能谱仪和显微Raman光谱仪对其进行表征,结果表明所制备的样品为锥形碳氮结构.用显微Raman光谱仪对锥形碳氮结构在室温下的发光性能进行了研究,发光谱显示出中心在621,643,7...     

水热合成ZnTe纳米粉的发光性能

利用Zn粉和Te粉为原材料,通过水热法在160℃下合成了ZnTe纳米粉,并用X射线衍射仪、x射线能谱仪、透射电子显微镜和显微Raman光谱对其进行了表征.X射线衍射谱表明合成的ZnTe具有闪锌矿结构.X射线能谱给出的结果表明合成的ZnTe中主要元素是Zn和Te,并含有杂质O.透射电子显微镜照片显示出合成的ZnTe纳米粉...     

纳米MEH-PPV阵列的光致发光

以多孔氧化铝为模板,将可溶性发光聚合物聚（2-甲氧基-5-（2’-乙基己氧基）-1,4-对苯乙炔）（MEH-PPV）镶嵌在纳米孔中,制备出高发光效率的纳米发光聚合物阵列,其光学特性与MEH-PPV薄膜显著不同。纳米孔内的MEH-PPV分子链形成链束,链束中的分子链数目依赖于制备纳米MEH-PPV阵列所用溶液的浓度。相对于稀溶液,在由浓溶液制备的纳米MEH-PPV阵列中,MEH—PPV链束的分子链数目较多,链间作用使MEH-PPV的能带展宽,能隙减小,因而浓溶液获得的纳米MEH—PPV阵列的光致发光峰红移。热处理纳米MEH-PPV阵列的PL谱表明,纳米孔内的聚合物分子链的弛豫运动受到限制。     

电子辐照金刚石的光致发光研究

本文利用488 nm及325 nm激光器比较了超纯、氮掺杂及硼掺杂三种金刚石经电子辐照所形成的光学中心. 结果表明, 金刚石中引入施主或受主原子后, 形成了新的光学中心, 如NV, DB1中心.     

Nanometer-sized Silicon Particles Prepared by Laser Vaporization and Their Photoluminescence

Nanometer-sized silicon particles were prepared by laser vaporization of a silicon target in pure argon ambient at a reduced pressure. The shape and size of the nanoparticles were characterized by transmission electron microscopy. The as prepared nanometer silicon particles exhibit visible luminescence under light excitation and the activated light emissions are found to show a strong dependence on temperature.     

激光分子束外延方法生长的ZnO薄膜的发光特性

研究了不同温度和不同光激发强度下激光分子束外延方法生长的ZnO薄膜样品的发光性能,发现YAG脉冲激光激发,强度超过一定值时会在长波方向上出现一个新的发光峰,此峰可能起源于电子-空穴的复合。室温下氙灯激发的光谱中可以看到峰值位于381nm的近带边紫外发射峰和位于450nm的强的蓝绿带发射,根据光致发光激发光谱的特征给出了一个简单的蓝光发射模型。对比YAG脉冲激光激发和氙灯激发得到的实验光谱,我们认为不同的光谱特征和样品发光的激发机制有关,紫外峰发射需激发强度超过一定值才能观察到,而蓝带发射则在一定的激发强度下迅速饱和。     

nc-Ge/SiN_x多层膜的光致发光特性

通过将a-Ge∶H/a-SiN_x多层膜进行氧化,制备了nc-Ge/SiN_x多层膜。观察到了室温下的强烈可见光发射,发光波长为500nm。通过分析,排除了与量子限制效应有关的光发射机制,也排除了与Si和N相关的缺陷产生的复合机制,认为该发光源于氧化后的a-SiN_x介质层中带尾态之间的辐射复合,最有效的激发能量约为介质层的带隙。     

ZnO纳米棒的拉曼和发光光谱研究(英文)

本文对采用湿化学方法合成的ZnO纳米棒样品的拉曼光谱和发光光谱进行了研究。由扫描电镜结果可知,合成的ZnO纳米棒具有很好的尺寸发布均匀性,直径在30 nm左右,长度大于1微米。采用显微拉曼光谱技术,得到了632.8 nm波长激发的拉曼光谱,并和体相样品的拉曼光谱进行了对比分析;由325 nm激光波长激发得到的荧光光谱可知样品具有很好的紫外发光性质。     

Dielectric barrier discharge plasma torch treatment of pyrolysis fuel oil in presence of methane and ethane

For the first time, atmospheric-pressure low-temperature plasma treatment of pyrolysis fuel oil (PFO) was investigated in dielectric barrier discharge (DBD) plasma torch reactor. Main parameters including working gas flow rate and Ar/CH₄ ratio along with the effects of separate Ar/C₂H₆ on the cracking of PFO were studied. By increasing the flow of argon and methane, the production rate of hydrocarbons containing ethane, ethylene, acetylene, propane, propylene, C₄, and C₅ increased from 1.72 to 10.48 ml/min for 4000 ml/min argon plus 400 ml/min methane as the working gas. In this case, the production rate of hydrogen increases from 10.58 to 56.86. The production rate of hydrocarbons increased from 3.53 to 13.5 ml/min by decreasing Ar/CH₄ ratio from 40 to 5.6. By changing the type of working gas from methane to ethane, the production of hydrocarbons considerably increased from 6.47 to 17.75 ml/min.     

SiO2干凝胶光致发光性质的研究

以硅酸酯Si(OC2H5)4(TEOS)和H2N(CH2)3Si(OC2H5)3(APS)为主要原料,在不同的条件下(催化剂、热处理、高分子添加剂)通过溶胶-凝胶法制备了一系列不同组成的SiO2干凝胶,并通过发光光谱对所得的干凝胶进行了表征.在长波365nm紫外光激发下,干凝胶样品都显示出较强的蓝光发射,但其发光波长和发光忖强度随着组成和处理条件的不同而有明显的差异.APS与有机酸(醋酸)和无机酸(盐酸、硝酸、硫酸)所得SiO2干凝胶的结果为IHAc(λmax=432nm)＞JHNO3(λmax=441nm)≈IH2SO4(λmax=426nm)>IHCI(λmax=442nm),并且在APS与HCl作用所得的干凝胶样品中,明显存在两种发光中心(其发射峰值波长分别位于442nm和487nm,相应的激发波长分别位于365nm和273nm).一定量的TEOS与APS相混合并与HAc作用不仅有利于干凝胶样品的迅速形成,而且有利于提高其发光强度:当R(APS/TEOS+TEOS摩尔比)=0.5～0.7时,样品发光较强;在0.5摩尔APS+0.5摩尔TEOS与3摩尔HAc的反应过程中加入高分子添加剂聚乙二醇(PEG5000、PE10000),所得样品的发光强度先随着PEG的加入量的增加而变强,然后随着PEG的加入量的增加而变弱,PEG5000和PEG10000的最佳掺杂量分别为0.8g和0.6g.在温度20～200℃的范围内,干凝胶样品的发光强度随着热处理温度的升高而增强,同时真空中处理样品的发光强度大于空气中处理样品的发光强度.这表明干凝胶样品的发光和氧缺陷及碳杂质有关.