从光子晶体效应到表面等离子波的实时演变

文章报道了激光诱导太赫兹表面等离子谐振效应。采用激光抽运-太赫兹波探测技术,实时改变单晶硅中的载流子浓度,使其介电特性从类绝缘体演变为类金属导体,以支持表面等离子谐振效应,进而实现太赫兹波在周期性亚波长单晶硅孔阵列中的实时可控制谐振增强传输。同时还通过实验观测到太赫兹波从光子晶体效应到表面等离子波的实时演变。文章作者采用Fano模型对实验结果进行模拟分析,获得了与实验数据一致的理论拟合。     

从光子晶体效应到表面等离子波的实时演变

文章报道了激光诱导太赫兹表面等离子谐振效应。采用激光抽运-太赫兹波探测技术，实时改变单晶硅中的载流子浓度，使其介电特性从类绝缘体演变为类金属导体，以支持表面等离子谐振效应，进而实现太赫兹波在周期性亚波长单晶硅孔阵列中的实时可控制谐振增强传输。同时还通过实验观测到太赫兹波从光子晶体效应到表面等离子波的实时演变。文章作者采用Fano模型对实验结果进行模拟分析，获得了与实验数据一致的理论拟合。     

Optical cavity coupled surface plasmon resonance sensing for enhanced sensitivity

A surface plasmon resonance (SPR) sensing system based on the optical cavity enhanced detection tech-nique is experimentally demonstrated. A fiber-optic laser cavity is built with a SPR sensor inside. By measuring the laser output power when the cavity is biased near the threshold point, the sensitivity, defined as the dependence of the output optical intensity on the sample variations, can be increased by about one order of magnitude compared to that of the SPR sensor alone under the intensity interrogation scheme. This could facilitate ultra-high sensitivity SPR biosensing applications. Further system miniaturization is possible by using integrated optical components and waveguide SPR sensors.     

D-shape polymer optical fibres for surface plasmon resonance sensing

We experimentally studied three different D-shape polymer optical fibres with an exposed core for their applications as surface plasmon resonance sensors. The first one was a conventional D-shape fibre with no microstructure while in two others the fibre core was surrounded by two rings of air holes. In one of the microstructured fibres we introduced special absorbing inclusions placed outside the microstructure to attenuate leaky modes. We compared the performance of the surface plasmon resonance sensors based on the three fibres. We showed that the fibre bending enhances the resonance in all investigated fibres. The measured sensitivity of about 610 nm/RIU for the refractive index of glycerol solution around 1.350 is similar in all fabricated sensors. However, the spectral width of the resonance curve is significantly lower for the fibre with inclusions suppressing the leaky modes.     

Polarization-insensitive surface plasmon resonance sensor by cross-slit metallic periodic arrays

We propose a plasmonic structure to obtain polarization-insensitive localized surface plasmon resonance (LSPR) sensor, which consists of cross-slit metallic periodic arrays embedded in the background material. Numerical simulation illustrates that the mechanism of the LSPR sensor is based on the shift of the Fabry–Perot cavity mode resonance peak in the spectrum as the change of the dielectric material properties for the near fields. And one of the transmission dips of the structure is very sensitive to the background materials; the structure could gain the sensitivity (nm/RIU) more than 500 nm/RIU. Meanwhile, the structure holds great potential to achieve high-performance sensors in practical application due to polarization-insensitive virtue.     

混合溶液折射率对局域表面等离子体共振的影响

对水-二甲基亚砜二元混合溶液质量分数和温度与折射率的关系进行了理论和实验研究,对几种经典模型的拟合结果进行了比较,给出了适合水-二甲基亚砜混合溶液的经验公式。对水性金溶胶-二甲基亚砜混合溶液质量分数和温度对局域表面等离子体共振峰值波长的影响进行了理论和实验研究,结果表明：水性金溶胶-二甲基亚砜混合溶液质量分数对共振峰值波长的调节有较好的线性关系和较大的调节范围,当温度从20 ℃增大到60 ℃,混合溶液金溶胶的共振峰值波长增加了1367 pm,温度敏感度为34 pm/K,在0%~100%的质量分数范围内,混合溶液金溶胶的共振峰值波长平均产生8.5103 pm的增长。     

混合溶液折射率对局域表面等离子体共振的影响

对水-二甲基亚砜二元混合溶液质量分数和温度与折射率的关系进行了理论和实验研究,对几种经典模型的拟合结果进行了比较,给出了适合水-二甲基亚砜混合溶液的经验公式。对水性金溶胶-二甲基亚砜混合溶液质量分数和温度对局域表面等离子体共振峰值波长的影响进行了理论和实验研究,结果表明:水性金溶胶-二甲基亚砜混合溶液质量分数对共振峰值波长的调节有较好的线性关系和较大的调节范围,当温度从20 ℃增大到60 ℃,混合溶液金溶胶的共振峰值波长增加了1367 pm,温度敏感度为34 pm/K,在0%~100%的质量分数范围内,混合溶液金溶胶的共振峰值波长平均产生8.5103 pm的增长。     

基于表面等离子体共振和定向耦合的D形光子晶体光纤折射率和温度传感器

利用光子晶体光纤结构的灵活性和性能的优越性, 设计了一种基于D形光子晶体光纤的折射率和温度传感器. 在D形光子晶体光纤表面抛磨并镀上金纳米薄膜, 作为表面等离子体共振传感通道用来测量液体折射率; 在包层的一个空气孔中填充温敏液体甲苯, 作为定向耦合通道实现对温度的测量. 进一步的数值计算发现, 基于定向耦合效应的温度传感和基于表面等离子体共振的折射率传感相互独立, D形光子晶体光纤同时进行折射率和温度传感检测. 在各向异性的完美匹配层边界条件下利用全矢量有限元法对该传感器特性进行了数值研究, 发现D形光子晶体光纤的空气孔直径决定了定向耦合吸收峰的中心波长和温度传感的灵敏度, 金薄膜的厚度和D形结构的抛磨深度仅影响表面等离子体共振峰的相对强度. 结果表明: 该传感器在-10–80 ℃的温度范围内具有11.6 nm/℃的温度灵敏度, 在1.34–1.44折射率范围内折射率灵敏度最高可达26000 nm/RIU.     

Optical characteristics of subwavelength metallic grating coupled porous film surface plasmon resonance sensor with high sensitivity

A high performance sub-wavelength metallic grating coupled surface plasmon resonance (SWMGCSPR) sensor with metal and porous composite layer is proposed. Rigorous coupled-wave analysis (RCWA) is conducted to prove the design feasibility, characterize the sensor's performance and determine geometric parameters of the structure, which is also employed to compute the electromagnetic (EM) field distributions at the resonant wavelengths. Parameters of sensing platform are optimized to achieve the best performance of the SPR sensor. Obtained results reveal that the proposed structure can excite SPR with negative diffraction order of SWMG. Both wavelength and angular sensitivities are greatly enhanced because surface plasmon wave (SPW) exhibits a large penetration depth which will enlarge the distance of interactions between SP and analytes. The detection sensitivities and quality parameters are estimated to be 700 nm/RIU and 509°/RIU with full width at half maximum (FWHM) less than 2.5 nm using the same optimized structure.     

Measurement of refractive index variation by differential surface plasmon resonance technique

A differential detection technique combined with a surface plasmon resonance technique is proposed for refractive index variation measurement. The experimental results demonstrate that our system can attain a resolution of 1.2 × 10^?5 RIU (refractive index unit). In addition, a method for two-dimensional detection of the refractive index variation is demonstrated. The system is free from the influence of optical source fluctuation, and can improve the measurement sensitivity.     

High surface plasmon resonance sensitivity enabled by optical disks

We report a systematic, experimental, and theoretical investigation on the surface plasmon resonance (SPR) sensing using optical disks with different track pitches, including Blu-ray disk (BD), digital versatile disk (DVD), and compact disk (CD). Optical reflection measurements indicate that CD and DVD exhibit much higher SPR sensitivity than BD. Both experiments and finite-difference time-domain simulations reveal that the SPR sensitivity is significantly affected by the diffraction order of the SPR peaks and higher diffraction order results in lower sensitivity. Numerical simulations also show that very high sensitivity (～1600 nm per refractive index unit) is achievable by CDs.     

Anomalous microwave reflection from a metal surface induced by spoof surface plasmon

The reflection of X-band microwaves (8-12 GHz) from a metallic aluminum (Al) surface with groove grating corrugations was investigated experimentally. It was shown that the reflection of p-polarization is much less than the microwave reflected from the corresponding area of an unruled Al surface, with selective wavelength. The experimental results demonstrated that the anomalous microwave reflection is strongly associated with the excitation of spoof surface plasmons at the Al-air interface by the surface grating coupler. This near-total absence of reflected microwaves is similar to the famous Wood's anomaly in the optical regime and is of fundamental importance to the applications of spoof surface plasmons in the microwave regime.     

High refractive index sensitivity sensing in gold nanoslit arrays

The extraordinary optical transmission(EOT) phenomenon of nano-periodic aperture array in metallic film has been widely investigated and used in biosensors. The surface plasmon resonance and cavity mode in some periodic nanostructures, such as nanohole and nanoslit, cause EOTs at certain wavelengths. This resonance wavelength is sensitive to the refractive index on the surface of periodic nanostructures. Therefore, the metallic nanostructures are expected to be good sensing elements. The sensing performances of gold nanoslit arrays are experimentally and theoretically investigated.Three-dimensional finite difference time domain(FDTD) simulations are utilized to explore their transmission spectra and steady-state field intensity distributions. The electron beam evaporation, electron beam lithography, and ion milling are applied to the gold nanoslit arrays with different widths and periods. The sensing performances of the gold nanoslit array are characterized via transmission spectra in four kinds of refractive index samples. The highest sensitivity reaches726 nm/RIU when the width of the gold nanoslit array is 38.5 nm.     

表面等离子体调制单模面发射激光器的研究

对单模面发射半导体激光器的研究随着其应用的不断扩展而引起了人们的广泛的重视,应用多种方法可以提高其输出功率并改善其模式抑制比.利用金属表面等离子体纳米结构调制的方法可以获得单模面发射激光器输出功率的提高,理论计算表明这种方法增强效应可达近50%. 关键词： 表面等离子体 单模面发射激光器 模式选择     

表面等离激元探针的高介电灵敏度与液体折射率测定

利用金纳米棒在光照射下激发表面等离激元的性质,实验研究了其在不同介电环境下的吸收光谱.通过分析纵向等离子体共振吸收峰峰位随介质折射率的变化,获得了金纳米棒表面等离激元探针测量介质折射率的经验公式为n=(385.59)-1(λ/nm-290.56).利用金纳米棒表面等离激元探针的高介电灵敏度,测试了一些未知液体的折射率,并与阿贝折射仪测量法的结果相比较.结果与分析表明,本方法较之阿贝折射仪测量介质折射率的方法具有更高的精密度.因此,表面等离探针可用于拓展大学物理实验中的介质折射率测量实验.     

基于导模共振效应提高石墨烯表面等离子体的局域特性

本文构建了一种包含石墨烯和亚波长光栅的复合结构, 借助衍射光栅的导模共振效应, 在石墨烯表面激发高局域性表面等离子体激元, 研究了石墨烯与光栅结构对表面等离子体激元局域特性的影响规律, 并借助基于有限元法的COMSOL软件, 分析了缓冲层厚度、光栅周期、载流子迁移率和费米能级对石墨烯的表面电场、品质因子Q和有效模式面积S_eff的影响. 结果表明, 石墨烯表面等离子体激元的局域性在特定的参数点获得显著提高: 当μ = 0.7 m²/(V·s)时, 品质因子达到最大值Q_max = 1793; 当p = 235 nm或E_F = 0.72 eV时, 表面电场达到了入射光的3000倍以上. 强烈的局域性导致强烈 的光-物质相互作用, 因而本文提出的复合结构可实现高灵敏度传感器和高效率的非线性光学设备, 极大地扩展了石墨烯在纳米光学领域中的应用.     

Understanding of optical readout accuracy with micromechanical sensor cantilever monitored by surface plasmon resonance

This paper reports a concept of micromechanical sensing of environmental condition using the surface plasmon resonance phenomenon. We calculate the resolution in the cantilever bending monitoring using the transfer matrix numerical method. We show that the cantilever deflection can be monitored with a resolution in the nanometer range. The SPs resonance behavior of the multilayer stack in the case of gold cantilever is discussed. We believe that this concept permits a low cost and ease of fabrication for a large bi-dimensional array of sensors with an enhanced signal-to-noise ratio.     

�������׻��༫������뼤Ԫ���������ʴ������Է���

研究了在三开口劈裂金属纳米环中,当入射场偏振方向不同时出现的多极局域表面等离激元共振现象及折射率传感特性。研究表明,当入射场偏振方向分别沿x 轴和y 轴时,在可见光-近红外区域分别激发起两个和三个明显的共振峰。通过改变缺口的张角,能够实现对共振峰位和强度的可控调整。共振峰位处劈裂纳米环的近场分布表明,LHA(左半弧)和DRHA(双右半弧)之间等离激元的杂化耦合是形成上述共振的原因。劈裂纳米环的多极共振非常适合折射率传感应用。当改变周围环境折射率,入射场沿x 轴偏振时,折射率敏感度的最大值可达到1365nm/RIU;入射场沿y 轴偏振时,折射率敏感度最大值可达2229nm/RIU。     

劈裂纳米环多极表面等离激元共振及折射率传感特性分析

研究了在三开口劈裂金属纳米环中,当入射场偏振方向不同时出现的多极局域表面等离激元共振现象及折射率传感特性。研究表明,当入射场偏振方向分别沿x 轴和y 轴时,在可见光-近红外区域分别激发起两个和三个明显的共振峰。通过改变缺口的张角,能够实现对共振峰位和强度的可控调整。共振峰位处劈裂纳米环的近场分布表明,LHA(左半弧)和DRHA(双右半弧)之间等离激元的杂化耦合是形成上述共振的原因。劈裂纳米环的多极共振非常适合折射率传感应用。当改变周围环境折射率,入射场沿x 轴偏振时,折射率敏感度的最大值可达到1365nm/RIU;入射场沿y 轴偏振时,折射率敏感度最大值可达2229nm/RIU。     

准晶体结构光纤表面等离子体共振传感器特性研究

光纤表面等离子体共振传感器在高灵敏度传感和在线实时监测等领域具有重要意义. 设计了一种六重准晶体结构环形通道光纤表面等离子体共振传感器, 基于有限元法对该传感器的传感特性进行了数值模拟. 研究了光纤各结构参量对传感器特性的影响规律. 研究结果表明: 待测液折射率的有效监测范围为1.25–1.331, 最高灵敏度可达26400 nm·RIU^-1, 传感器具有损耗谱杂峰少、探测范围广、灵敏度高、设计灵活性高和光路可弯曲等特点, 在生化检测、公共安全、环境污染监测以及高灵敏度传感等领域具有广泛的应用前景.