Biomaterial immobilization in nanoporous carbon molecular sieves: influence of solution pH, pore volume, and pore diameter

The adsorption of lysozyme (Lz) onto nanoporous carbon molecular sieves with various pore diameters has been studied at different solution pH values. All the adsorption isotherms have successfully been correlated by the Langmuir equation. The amount of adsorbed Lz depends on the solution pH as well as on the specific pore volume and pore diameter of the adsorbents. The maximum adsorption was observed near the isoelectric point of the Lz (pI approximately 11), suggesting that suppression of electric repulsion between the enzymes plays an important role in the adsorption process. Moreover, the amount adsorbed depends on the pore size and pore volume of the nanoporous carbon adsorbents, indicating that the Lz molecules are adsorbed inside the mesopores. CMK-3-150 shows a larger amount of Lz adsorption as compared to CMK-3. The increased Lz adsorption capacity of CMK-3-150 may be due to the larger pore volume and pore diameter as compared to that of CMK-3. The unaltered structural order of the nanoporous adsorbents after the adsorption has been confirmed by the physicochemical characterization techniques such as XRD and N(2) adsorption. In addition, FT-IR spectroscopic studies confirm that the Lz used in this study is stable even after the adsorption on the nanoporous carbon. These results indicate that nanoporous carbon has superior water stability and thus is a more appropriate adsorbent for biomaterials than nanoporous silica.     

Acetylacetone, an interesting anchoring group for ZnO-based organic-inorganic hybrid materials: a combined experimental and theoretical study

Acetylacetone (acacH) adsorption on ZnO (10-10) surface has been studied by a theoretical periodic approach using density functional theory. Two dissociative adsorption modes were investigated and compared to the most stable adsorption mode of formic acid. Acetylacetone appears as a suitable anchoring group for hybrid materials, with adsorption energies of the same order of magnitude as formic acid. IR spectra of the acac/ZnO systems were computed in order to determine the spectral signature of adsorption and, possibly, of each adsorption mode to follow the coordination of acac on ZnO at the experimental level. The results have been compared to Fourier transform infrared (attenuated total reflection-IR) experimental spectra. The present investigation points out the interest of acetylacetone as an anchoring group for the development of new ZnO-based functionalized hybrid layers for corrosion protection, light emitting diodes, photocatalytic systems, and dye-sensitized solar cells.     

Isotherms for adsorption of cellobiohydrolase I and II fromtrichoderma reesei on microcrystalline cellulose

Adsorption to microcrystalline cellulose (Avicel) of pure cellobiohydrolase I and II (CBH I and CBH II) fromTrichoderma reesei has been studied. Adsorption isotherms of the enzymes were measured at 4‡C using CBH I and CBH II alone and in reconstituted equimolar mixtures. Several models (Langmuir, Freundlich, Temkin, Jovanovic) were tested to describe the experimental adsorption isotherms. The isotherms did not follow the basic (one site) Langmuir equation that has often been used to describe adsorption isotherms of cellulases; correlation coefficients (R²) were only 0.926 and 0.947, for CBH I and II, respectively. The experimental isotherms were best described by a model of Langmuir type with two adsorption sites and by a combined Langmuir-Freundlich model (analogous to the Hill equation); using these models the correlation coefficients were in most cases higher than 0.995. Apparent binding parameters derived from the two sites Langmuir model indicated stronger binding of CBH II compared to CBH I; the distribution coefficients were 20.7 and 3.7 L/g for the two enzymes, respectively. The binding capacity, on the other hand, was higher for CBH I, 1.0 Μmol (67 mg) per gram Avicel, compared to 0.57 Μmol/g (30 mg/g) for CBH II. The isotherms when analyzed with the combined Langmuir-Freundlich model indicated presence of unequal binding sites on cellulose and/or negative cooperativity in the binding of the enzyme molecules.     

Adsorption of gases in metal organic materials: comparison of simulations and experiments

Molecular simulations using standard force fields have been carried out to model the adsorption of various light gases on a number of different metal organic framework-type materials. The results have been compared with the available experimental data to test the validity of the model potentials. We observe good agreement between simulations and experiments for a number of different cases and very poor agreement in other cases. Possible reasons for the discrepancy in simulated and measured isotherms are discussed. We predict hydrogen adsorption isotherms at 77 and 298 K in a number of different metal organic framework materials. The importance of quantum diffraction effects and framework charges on the adsorption of hydrogen at 77 K is discussed. Our calculations indicate that at room temperature none of the materials that we have tested is able to meet the requirements for on-board hydrogen storage for fuel cell vehicles. We have calculated the volume available in a given sorbent at a specified adsorption energy (density of states). We discuss how this density of states can be used to assess the effectiveness of a sorbent material for hydrogen storage.     

Equilibrium uptake and sorption dynamics for the removal of a basic dye (basic red) using low-cost adsorbents

Waste carbon slurries (generated in fertilizer plants) and blast furnace slag (generated in steel plants) have been converted into low-cost potential adsorbents. The adsorbents have been characterized and tried for the removal of the dye basic red from wastewater. Studies were performed at different pH to find the pH at which maximum adsorption occurs. Equilibrium isotherms were determined to assess the maximum adsorption capacity of the adsorbents. Adsorption capacities are compared for activated carbon developed from fertilizer waste and activated slag developed from blast furnace waste. The adsorption data are correlated with Freundlich and Langmuir isotherms in each system. The kinetics of adsorption depends on the adsorbate concentration and the physical and chemical characteristics of the adsorbent. Studies were conducted to delineate the effect of pH, temperature, initial absorbate concentration, particle size of the adsorbent, and solid-to-liquid ratio. The adsorption of basic red was found to be endothermic and first-order in nature.     

Adsorption modes of cysteine on Au(111): thiolate, amino-thiolate, disulfide

The adsorption of cysteine on the (111) surface of gold has been studied by means of periodic supercell density-functional theory calculations. A number of different adsorption modes are examined, including adsorption through the thiol group in either thiolate or disulfide form, and adsorption through both the thiol and amino functional groups. We find that at intermediate coverage densities the latter mode of adsorption is favored, followed by thiolate adsorption at the bridge (slightly displace toward fcc) site. The N-Au and S-Au bond strengths in the amino-thiolate adsorption are estimated to be of the order of 6 and 47 kcal/mol, respectively. The electronic structure of the different systems is analyzed, with focus on the total and projected density of states, as well as on the detailed character of the electronic states at the interface. States near the Fermi energy are found to have a metal-molecule antibonding character, whereas metal-molecule bonding states mostly occur near the lower edge of the Au-d band.     

Adsorption of a hazardous dye, erythrosine, over hen feathers

Erythrosine is a popular dye that is widely used in cosmetics, foodstuffs, medicines, and textiles. It is highly toxic to mankind and can lead to many diseases including carcinogenicity. Removal of erythrosine has been carried out using waste material--hen feathers--as adsorbent. The effects of pH, concentration of the dye, temperature, and adsorbent dosage have been studied. Adsorption of erythrosine over hen feathers has been correlated with Freundlich and Langmuir isotherms and satisfies both models. The adsorption process has been found endothermic in nature and thermodynamic parameters, Gibb's free energy (DeltaG(0)), change in enthalpy (DeltaH(0)), and change in entropy (DeltaS(0)) have been calculated. The paper also includes results on the kinetic measurements of adsorption of the dye on hen feathers at different temperatures. The adsorption follows a first-order kinetics at all the temperatures and values of the rate constant (k(ad)) have been calculated as 0.0179, 0.0177, and 0.0172 s(-1) at 30, 40, and 50 degrees C, respectively. By rate expression and treatment of data it has been ascertained that the adsorption of erythrosine over hen feathers follows a particle diffusion mechanism.     

Adsorption of O, H, OH, and H2O on Ag(100)

The adsorption of H(2)O and its dissociation products, O, H, and OH, on Ag(100) has been studied using an ab initio embedding method. Results at different sites (atop, bridge, and hollow) are presented. The four-fold hollow site is found to be the most stable adsorption site for O, H, and OH, and the calculated adsorption energies are 87.1, 42.7, and 76.2 kcal mol(-1), respectively. The adsorption energy of water at the atop and bridge sites is almost identical with values of 11.1 and 12.0 kcal mol(-1), respectively. The formation of adsorbed OH species by adsorption of water on oxygen-precovered Ag(100) is predicted to be exothermic by 36 kcal mol(-1).     

Clickable Periodic Mesoporous Organosilicas: Synthesis,Click Reactions,and Adsorption of Antibiotics

Pharmaceutical antibiotics are not easily removed from water by conventional water‐treatment technologies and have been recognized as new emerging pollutants. Herein, we report the synthesis of clickable azido periodic mesoporous organosilicas (PMOs) and their use as adsorbents for the adsorption of antibiotics. Ethane‐bridged PMOs, functionalized with azido groups at different densities, were synthesized by the co‐condensation of 1,2‐bis(trimethoxysilyl)ethane (BTME) and 3‐azidopropyltrimethoxysilane (AzPTMS), in the presence of nonionic‐surfactant triblock‐copolymer P123, in an acidic medium. Four different alkynes were conjugated to azide‐terminated PMOs by means of an efficient click reaction. The clicked PMOs showed improved adsorption capacity (241 μg g^?1) for antibiotics (ciprofloxacin hydrochloride) compared with azido‐functionalized PMOs because of the enhanced π–π stacking interactions. These results indicate that click reactions can introduce multifunctional groups onto PMOs, thus demonstrating the great potential of PMOs for environmental applications.     

Theoretical study of MgO(001) surfaces: Pure,doped with Fe,Ca, and Al,and with and without adsorbed water

Ab initio calculations of large cluster models have been performed in order to study water adsorption at the five‐fold coordinated adsorption site on pure Mg(001) and MgO(001) surfaces doped with Fe, Ca, and Al. The geometric parameters of the adsorbed water molecule have been optimized preparatory to analysis of binding energies, charge transfer, preferential sites of interaction, and bonding distances. We have used Mulliken population analysis methods in order to analyze charge distributions and the direction of charge transfer. We have also investigated energy gaps, HOMO energies, and SCF orbital energies as well as the acid‐base properties of our cluster model. Numerical results are compared, where possible, with experiment and interpreted in the framework of various analytical models. © 2001 John Wiley & Sons, Inc. Int J Quant Chem, 2001     

Adsorption of Co2+, Ni2+, Cu2+ and Zn2+ from 0.5 M NaCl and major ion sea water on a mixture of delta-MnO2 and amorphous FeOOH

The pH(pzc) values of several mechanical mixtures of amorphous hydrous oxides of iron (amorphous FeOOH) and manganese (delta-MnO2) have been determined using the solid addition method. While the pH(pzc) of delta-MnO2 remains almost unchanged, the corresponding value for amorphous FeOOH tends to increase with increased proportion of delta-MnO2 in the mixtures. The adsorption behavior of Co2+, Ni2+, Cu2+, and Zn2+ with respect to pH on a mechanical mixture of 70% delta-MnO2 and 30% amorphous FeOOH from 0.5 M NaCl and major ion sea water has been studied. Since delta-MnO2 is much more active adsorbent than amorphous FeOOH at pH below 6.5, the adsorption data on mixture have not only been normalized with respect to the mass of delta-MnO2 in the mixture, but also compared with adsorption data on delta-MnO2 alone. It is interesting to note that though each trace metal behaves in a different way from the other especially with respect to the nature of electrolyte medium, it is generally observed that the adsorption on the mixed oxide system is higher than that on delta-MnO2 alone under similar condition. It is also observed that adsorption in major ion sea water at a particular pH value is lower than in 0.5 M NaCl solution.     

Thermodynamic assessment of Hg(II)-gibbsite interactions

As discrete particles and/or as surface coatings on other minerals in natural systems, aluminum hydroxides are efficient sinks for Hg(II). The Hg(II) adsorption on gibbsite was determined as a function of temperature (T), pH, and the type of background electrolytes, i.e., NaNO(3), NaClO(4), and NaCl. When the equilibration time t(E) approximately 2 h, the Hg(II) retention on gibbsite was found to be a reversible process, which was ascribed to adsorption. The Hg(II) adsorption capacity, i.e., Gamma(Hg(II)), varied with the type of electrolyte used in accordance with the following order: Gamma(NO(3))(Hg(II)) > or = Gamma(ClO(4))(Hg(II)) > or = Gamma(Cl)(Hg(II)). In all cases, the estimated thermodynamic parameters showed that the Hg(II) adsorption on gibbsite was endothermic and spontaneous. The Hg(II) adsorption data were quantified with the Langmuir or Hill, and Dublin-Radushkevick (DR), isotherms at all temperatures and acidity levels examined. Always, the Hg(II) adsorption data were in compliance with the DR model. However, the Hg(II) adsorption in NaNO(3) or NaClO(4) was interpreted in terms of the Langmuir model. When NaCl was used as electrolyte, the Hg(II) adsorption was modeled well with the Hill equation. The mean free energy values calculated from DR plots concluded that Hg(II)-gibbsite interactions are a result of chemical bonding.     

Adsorption of Basic Magenta II onto H2SO4 activated immature Gossypium hirsutum seeds: Kinetics,isotherms, mass transfer,thermodynamics and process design

The adsorption of Basic Magenta II onto H₂SO₄ activated immature Gossypium hirsutum seeds was analysed using Ho, modified Freundlich, Sobkowsk–Czerwi, Blanchard, Elovich, Avrami, and modified Ritchie kinetic models by nonlinear regression-sum of normalized errors analysis. The goodness of fit was evaluated with coefficient of determination and root mean square error. The good agreement of experimental data to Avrami second-order model indicated that the mechanism of adsorption followed multiple kinetic orders. The Avrami second-order mechanism was applied to predict the rate constant of sorption and the equilibrium capacity and subsequently the obtained equilibrium adsorption capacities were utilized to find the equilibrium concentrations. Langmuir, Freundlich, Temkin, Sips and Hill isotherms were investigated to understand the nature of adsorption with the help of nonlinear regression analysis. Both Sips and Hill isotherms were best fit to the adsorption equilibrium data showing the homogeneous adsorption on the heterogeneous surface of carbon and the positive co-operative manifestations of the Basic Magenta II molecules. The mass transfer study depicted the details such as mass transfer coefficient, intra-particle diffusion rate, pore diffusion coefficient, and film diffusion coefficient. The adsorption process was found to be controlled by film diffusion. The thermodynamic parameters like, Gibbs free energy change, enthalpy change, entropy change and isosteric heat of adsorption confirmed the endothermic, feasible and spontaneous nature of adsorption. A single stage batch adsorber was designed using Sips isotherm constants to estimate the amount of carbon required for desired purification.     

DFT characterization of adsorbed NH(x) species on Pt(100) and Pt(111) surfaces

Periodic density functional theory (DFT) calculations using plane waves have been performed to systematically investigate the adsorption and relative stability of ammonia and its dehydrogenated species on Pt(111) and Pt(100) surfaces. Different adsorption geometries and positions have been studied, and in each case, the equilibrium configuration has been determined by relaxation of the system. The vibrational spectra of the various ammonia fragments have been computed, and band assignments have been compared in detail with available experimental data. The adsorption of NH3 (on top) and NH2 (bridge) is more favorable on Pt(100) than on Pt(111), while similar adsorption energies were computed for NH (hollow) and N (hollow) on both surfaces. The remarkably lower adsorption energy of NH2 over Pt(111) as compared with Pt(100) (the difference being approximately 0.7 eV) can be related to different geometric and electronic factors associated with this particular intermediate. Accordingly, the type of platinum surface determines the most stable NH(x) fragment: Pt(100) has more affinity for NH2 species, whereas NH species are preferred over Pt(111).     

Am(III) adsorption on oxides of aluminium and silicon: effects of humic substances,pH, and ionic strength

The adsorption of Am(III) (total concentration 10(-9) mol/l) on alumina, silica, and hematite was studied by a batch technique. The effects of pH, ionic strength, and humic substances on the adsorption of Am(III) on alumina and silica were investigated, and the adsorption isotherms of Am(III) on alumina and silica at different pH values were determined. It was found that compared with the adsorption of Am(III) on alumina, the adsorbability of silica on the basis of mass is less, the relative adsorption rate on silica is slower, the sensitivity of adsorption on silica to ionic strength is less, the dependence of adsorption on silica on pH is gentler, and consequently that the adsorption characteristics of Am(III) on alumina and silica are distinctly different. The negative effect of fulvic acid on the adsorption on silica and the positive effect of humic acid on the adsorption on alumina were found. In contrast to the Am(III) adsorption on alumina and silica, a tremendously high adsorbability of Am(III) on hematite was found. The sequence of adsorbabilities of Am(III) on the basis of mass is Fe2O3 > Al2O3 > SiO2.     

Adsorption of designed pyrimidine derivative ligands on an activated carbon for the removal of Cu(II) ions from aqueous solution

The adsorption of five Nalpha-substituted amino acids with a 5-nitroso-6-oxo pyrimidine as substituent on a commercial activated carbon (AC) has been studied in aqueous solution at several pH values. The adsorption processes of these organic compounds have been analyzed on the basis of the electrolytic behavior of the adsorbates. In all cases, the adsorption process is highly irreversible due to strong pi-pi interactions between the arene centers of the AC and the pyrimidine residue of the adsorbates. This interaction is consistent with XPS data and HOMO-LUMO theoretical calculations. The adsorption of these organic compounds provides a new route for the functionalization of the AC surface with carboxyl groups. In addition, the adsorption capacity of the AC/organic compound systems for Cu(II) ions in aqueous solution has been studied at different pH values. These systems show an increase of the adsorption capacity for Cu(II) compared to the AC, which is related to the AC functionalization with carboxyl groups due to the adsorbed organic compounds.     

Synthesis of poly (acrylamide-co-aconitic acid) adsorbents by gamma-irradiation,characterization, adsorption studies and application for cationic dyes removal

In this study, acrylamide (AAm)/aconitic acid (ACA) copolymers were prepared with two different mol% of aconitic acid 4%, 17% and were irradiated with gamma irradiation at different irradiation doses (4 - 25kGy). The percent yield was assigned by gravimetrical method. The effect of irradiation dose, pH and involved amounts of monomers (AAm/ACA) in hydrogels on swelling properties were investigated. The conversion of monomers to hydrogels was 100% at 25kGy. Poly(acrylamide-co-aconitic acid) P(AAm/ACA) hydrogels have been used for the adsorption of some aqueous solutions of dyes such as Methylene Blue (MB) and Safranine-O (S). The hydrogels were swollen in distilled water at pH 3, 5, 7, 8 and in aqueous solutions of dyes. The initial swelling rates of hydrogels are increased by increasing of pH. The effects of concentration of the aqueous solutions of dye and hydrogel composition on the adsorption were investigated. The adsorption is increased and changed depending on the structure of dye and composition of hydrogel.     

Adsorption of a diverse set of organic vapors on quartz, CaCO3, and alpha-Al2O3 at different relative humidities

Adsorption constants of a diverse set of 50 organic vapors have been measured on quartz (SiO(2)), CaCO(3), and alpha-Al(2)O(3) at different relative humidities at 15 degrees C. For nonpolar compounds we found an exponential decrease of the adsorption constants on a given mineral between 40 and 97% relative humidity. Extrapolated to 100% relative humidity, the adsorption constants of nonpolar compounds on the different minerals coincide and agree with those measured on a bulk water surface. The adsorption constants of polar compounds also decrease with increasing humidity up to 90%, but between 90% and 100% they increase again. We speculate that this effect is due to a change in the orientation of the water molecules that form the surface at which the organic vapors adsorb at this high humidity. The compound variability in the adsorption constants of all compounds on a given surface at a given relative humidity could be described rather well with a linear free energy relationship using Abraham's solvation parameters for the van der Waals and electron-donor/acceptor properties of the compounds. The remaining deviation between fitted and experimental data was found to be systematic, which indicated that an optimized parameter set for the used compounds could still considerably improve the fit.