N-Dimethoxyphenylation of highly basic pyrazoles during undivided electrolysis

The reactions of pyrazole, 3,5-dimethylpyrazole, and its 4-nitro derivatives with 1,4-dimethoxybenzene during undivided amperostatic electrolysis in MeCN (CH₂Cl₂) were studied. The basicity of the medium, which depends on the solvent nature, the nature and concentration of pyrazole and the acid-base properties of additives, and the amount of electricity passed determine the yield and relative content of the target products, viz., 1,4-dimethoxy-2-(pyrazol-1-yl)benzenes (1) and 1,4-dimethoxy-1,4-di(pyrazol-1-yl)cyclohexa-2,5-dienes (2). The process occurs mainly through the interaction of the nonionized solvato complex of pyrazole with the 1,4-dimethoxybenzene radical cation and affords radical intermediates structurally similar to compounds 1 and 2. The key stage of the process determining the 1 : 2 ratio is the rearrangement of the intermediately produced 1,4-dimethoxy-1-(pyrazol-1-yl)arenonium cation to the 1-(pyrazol-1-yl)-2,5-dimethoxyarenonium cation.     

Electrosynthesis of N-Arylazoles by Electrolyzing a Mixture of Azole and 1,4-Dimethoxybenzene in a Diaphragmless Cell

An analysis is performed and data are compared on the electrosynthesis of N-arylazoles and regularities of this process in conditions of a diaphragmless galvanostatic electrolysis (Pt, MeCN, Bu₄NClO₄) of a mixture of 1,4-dimethoxybenzene (DMB) with azoles (pyrazole, triazole, their derivatives, tetrazole). Electrolysis of an azole/DMB mixture leads to the formation of products of an ortho-substitution—1,4-dimethoxy-2-(azolyl-1)benzenes—and, simultaneously, hydrolytically unstable products of an ipso-bis-attachment—1,4-dimethoxy-1,4-di-(azolyl-1)cyclohexa-2,5-dienes. The overall yield of these compounds increases upon adding a base (collidine) or an acid (AcOH) into the initial mixture, and the basicity of initial azoles substantially affects the electrosynthesis results. New notions on the nature of nucleophilic species interacting with radical cation of DMB are considered. The species in question are complexes of azoles with one another or with collidine generated at the expense of the hydrogen bond, rather than azolate ions. Furthermore, the cathodic process is largely connected not with the generation of azolate ions (as a result of the reduction of initial azoles) but with the deprotonation of onium compounds (BH⁺)—products of the interaction of azoles or collidine with protons. The mechanism of electrosynthesis of N-arylazoles is discussed. The key stages of the synthesis are the attack of a nucleophile on the ipso- and, possibly, ortho-positions of the benzene ring of radical cation of DMB, as well as the rearrangement of the intermediate cation of 1,4-dimethoxy-1-(azolyl-1)arenonium into the cation of 1-(azolyl-1)-2,5-dimethoxyarenonium, which affects both the yield and ratio of final products of the reaction mixture.     

Electrochemical <Emphasis Type="Italic">N</Emphasis>-arylation of azoles in MeOH using undivided electrolysis of their mixtures with 1,4-dimethoxybenzene

The reactions of 1,4-dimethoxybenzene with azoles (pyrazole, triazole, and their derivatives, as well as tetrazole) were studied by undivided amperostatic electrolysis at Pt electrodes in MeOH. The process proceeds via the formation of a 1,1,4-trimethoxyarenonium cation as the key intermediate and affords 1,1,4,4-tetramethoxycyclohexa-2,5-diene, 1,1,4-trimethoxy-4-(azol-1-yl)cyclohexa-2,5-diene, and 1,4-dimethoxy-2-(azol-1-yl)benzene as the main products. Azole and solvent molecules compete as nucleophiles during electrolysis. A fine mechanism of the process was considered. Dedicated to Academician N. K. Kochetkov on the occasion of his 90th birthday. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1166–1171, May, 2005.     

N-Arylation of azoles with low basicity by 1,4-dimethoxybenzene during undivided electrolysis

The reactions of 1,4-dimethoxybenzene with 4-nitropyrazole, 3,4-dinitro-5-methylpyrazole, 1,2,4-triazole, 3-nitro-1,2,4-triazole, and tetrazole were studied during undivided amperostatic electrolysis on a Pt electrode in MeCN, CH₂Cl₂, and MeOH. The main reaction products were 2-azolyl-1,4-dimethoxybenzenes and (or) 1,4-diazolyl-1,4-dimethoxycyclohexa-2,5-dienes. In all cases except 1,2,4-triazole, N-arylation occurs only in the presence of the Alk₄N⁺ salts of azoles or 2,4,6-trimethylpyridine as a base. The mechanism of the reactions is discussed.     

Arenium cation as the key intermediate of the electrosynthesis of <Emphasis Type="Italic">N</Emphasis>-(2,5-dimethoxyphenyl)azoles. A new approach to the synthesis of <Emphasis Type="Italic">N</Emphasis>-(dimethoxyphenyl)azoles

Data on the effect of the acid-base properties of the medium on the yield and composition of the products of N-dimethoxyphenylation of azoles (pyrazole, triazole, their substituted derivatives, and tetrazole) upon galvanostatic electrolysis of azole—1,4-dimethoxybenzene mixtures in nucleophilic (MeOH) and neutral (MeCN) media were considered and the trends of this process were discussed. The generation of arenium cations (1,4-dimethoxy-1-azolylbenzenium in MeCN and 1,1,4-trimethoxybenzenium in MeOH) as the key intermediates of electrosynthesis of N-(dimethoxyphenyl)azoles, was proved experimentally. A new approach to the synthesis of N-(dimethoxyphenyl)azoles through electrosynthesis of 1,1,4,4-tetramethoxycyclohexa-2,5-diene by electrooxidation of 1,4-dimethoxybenzene in MeOH as the first step and the reaction of this quinone diketal with azoles as the second step was suggested. The efficiency of this route to N-(dimethoxyphenyl)azoles is comparable with the efficiency of the purely electrochemical one-step process. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2101–2109, November, 2007.     

Regularities of anodic acetoxylation of 1,4-dimethoxybenzene in protic and aprotic media

Electrochemical acetoxylation of 1,4-dimethoxybenzene during amperostatic electrolysis in an undivided cell at Pt electrodes in MeCN or MeOH solutions containing Et₄NOAc gives 2,5-dimethoxyphenyl acetate if AcOH or CH₂Cl₂ co-solvent has been added in a concentration of ≥50%. The reaction mechanism includes a nucleophilic attack of AcO⁻ ion on the ipso-position of 1,4-dimethoxybenzene radical cation. The process efficiency depends on factors that determine the stability and reactivity of the intermediate 1,4-dimethoxy-1-acetoxyarenonium cation. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1534–1538, July, 2005.     

N-Alkylation of Pyrazoles with Mannich Bases Derived from ortho-Hydroxyacetophenones

The involvement of Mannich bases derived from ortho-hydroxyacetophenones in amine-exchange reactions with pyrazole and methyl- and/or halogen-substituted pyrazoles was studied. The corresponding -(pyrazol-1-yl)ethyl ketones resulted in excellent yield and were characterized by elemental analysis, IR, and ¹H and ¹³C NMR spectroscopy.     

Boron-nitrogen compounds: XCVI. Studies of the chemical behavior of monomeric pyrazol-1-ylboranes

Two 1,3-dimethyl-2-(methylpyrazol-1′-yl)-1,3,2-diazaboracyclopentanes have been prepared. The interaction of such monomeric pyrazol-1-ylboranes containing trigonal boron with pyrazoles has been examined and $\text{1}\text{1}$ molar addition compounds have been identified and isolated. Labelling experiments support spectroscopic evidence to suggest a mobile bridging hydrogen in the cited adducts at ambient temperature and above. Monomeric 1,3-dimethyl-2-(pyrazol-1′-yl)-1,3,2-diazaboracyclopentane reacts with (dimethylamino)dialkylboranes by an exchange of the pyrazolyl with the dimethylamino group. A cyclic transition state involving a B₂N₃ ring system is suggested for this process in which the corresponding 2-dimethylamino-1,3,2-diazaboracyclopentane and B-tetraalkylpyrazaboles are the final products. The latter are also found among the reaction products of pyrazole adducts of monomeric pyrazol-1-ylboranes with (dimethylamino)dialkylboranes. The interaction of (dimethylamino)dialkylboranes with pyrazole gives B-tetraalkylpyrazaboles in essentially quantitative yield.     

Deprotonation of pyrazole and its analogs by aqueous copper acetate in the presence of triethylamine

Deprotonation reactions of pyrazole and its analogs by aqueous copper acetate in benzene at room temperature in the presence of triethylamine were studied. Unlike 3,5-dimethylpyrazole, more acidic pyrazole, 5-methyl-3-trifluoromethylpyrazole, and 3,5-bis(trifluoromethyl)pyrazoles are deprotonated to give pyrazolate bridges. The structural features of the obtained compounds are discussed based on X-ray diffraction data.     

Conformation and ortho steric effects in a series of 2-(pyrazol-1-yl)quinolines

Nine 2-(pyrazol-1-yl)-4-methylquinolines bearing substituents on the pyrazole 3- or 5-positions (H, Me, Et, i-Pr, t-Bu) were regioselectively synthesized either using the direct condensation of 2-chloro-4-methylquinoline and sodium salt of 3(5)-substituted pyrazoles or by treatment of 2-hydrazino-4-methylquinoline with an appropriate β-ketoaldehyde. The ¹H and ¹³C chemical shifts were discussed taking into account the preferred conformation about the C-2-N-1′ bond as calculated by the AM1 Hamiltonian. It appears that 5-ethyl and 5-isopropyl substituted derivatives present short C-H-N-1 interactions. Ortho steric effects appear to be responsible for these conformations.     

Studies on the synthesis of heterocyclic compounds. Part IV. Further investigation of the pschorr reaction with some pyrazole derivatives

Thermal decomposition of the diazonium sulfate derived from N-methyl-(1-phenyl-3-methylpyrazol-5-yl)-2-aminobenzamide afforded products formulated as 1-phenyl-3-methyl[2]benzopyrano[4,3-c]pyrazol-5-one (yield 10%), 1,4-dimethyl-3-phenylpyrazolo[3,4-c]isoquinolin-5-one (yield 10%), N-methyl-(1-phenyl-3-methylpyrazol-5-yl)-2-hydroxybenzamide (yield 8%) and 4′-hydroxy-2,3′-dimethyl-1′-phenylspiro[isoindoline-1,5′-[2]-pyrazolin]-3-one (yield 20%). Decomposition of the diazonium sulfate derived from N-methyl-(1,3-diphenylpyrazol-5-yl)-2-aminobenzamide gave products formulated as 7,9-dimethyldibenzo[e,g]pyrazolo[1,5-a][1,3]-diazocin-10-(9H)one (yield 8%), 4-methyl-1,3-diphenylpyrazolo[3,4-c]isoquinolin-5-one (yield 7%) and 4′-hydroxy-2-methyl-1′,3′-diphenylspiro[isoindoline-1,5′-[2]pyrazolin]3-one (yield 10%). The spiro compounds 6a,b underwent thermal and acid-catalysed conversion into the hitherto unknown 2-benzopyrano[4,3-c]pyrazole ring system 7a,b in good yield. Analytical and spectral data are presented which supported the structures proposed.     

Polykis(pyrazol-1-yl)benzenes: preparation, structure, and complexation with copper and palladium

A series of polykis(pyrazol-1-yl)benzenes, potential chelating ligands for transition metals, have been prepared by nucleophilic substitution of fluorine in 1,2-difluoro-, 1,2,3,4-tetrafluoro-, 1,2,4,5-tetrafluoro-, and hexafluorobenzenes. The observed substitution pattern indicated formation of early TS, making activation by fluorines ortho- to the site of nucleophilic attack dominant. Complexation of the synthesized ligands with copper(II) and palladium(II) was analyzed by ESI mass spectrometry. X-ray structures were determined for palladium(II) complex with 1,2-bis(pyrazol-1-yl)benzene and copper(II) complex with 1,4-difluoro-2,3-bis(pyrazol-1-yl)benzene, revealing an unusual seven-membered chelate cycle formation.     

4-functionally substituted 3-hetarylpyrazoles: XX. Synthesis of derivatives of 5-(pyrasol-4-yl)-1,2,4-triazole and 3-(pyrazol-4-yl)-1,2,4-triazolo[3,4-c][1,4]oxazine

N-Methylimines of 3-aryl-1-phenylpyrazole-4-carbaldehyde react with ethyl 2-aryl-hydrazino-2-chloroacetate with the formation of ethyl 1-aryl-5-(pyrazole-4-yl)-4,5-dihydro-1H-1,2,4-triazolecarboxylates. Analogous reactions of pyrazol-4-carbaldehyde N-(2-hydroxy)ethylimines results in derivatives of 3-(pyrazol-4-yl)-1,2,4-triazolo[3,4-c][1,4]-oxazines.     

Nitropyrazoles

A method of synthesizing nitro derivatives of lH,4H-pyrazolo[4,3-c]pyrazole is developed, and some of its transformations are studied. 3-Methyl-6-nitro-, 3-carboxy(methoxy-carbonyl, carbamoyl)-6-nitro-, 3-amino-6-nitro-, 3-nitro-, 3,6-dinitro-, 1,4-diacetonyl-3,6-dinitro-, and lH,4H-3-aminopyrazolo[4,3-c]pyrazoles were obtained from 1H,4H-3 -methylpyrazolo[4,3-c]pyrazole. Unsubstituted 1H,4H-pyrazolo[4,3-c]pyrazole, the first member of this series, was obtained for the first time. The compounds prepared were characterized by¹H,¹³C,¹⁴N, and¹⁵N NMR spectroscopy. NH-Acidity and basicity of the series of pyrazolo[4,3-c]pyrazoles synthesized is studied and the effect of the fused pyrazole ring on these properties is examined.Deceased March 18, 1989.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1108–1113, June, 1993.     

Nitropyrazoles

A preparative method ofN-amination of pyrazoles bearing nitro groups and other electron withdrawing substituents in the pyrazole ring with hydroxylamine-O-sulfonic acid involving control of the pH of the medium has been elaborated. A series of previously unknown pyrazoles has been prepared. Basicities of 1-aminopyrazole and 1-amino-4-nitropyrazole have been measured and differences between the basicities of theC- andN-amino groups for the pyrazole series have been revealed.For part 3, see ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1434–1436, August, 1993.     

A new synthesis of 1,5-dihydropyridazino[3,4-b]quinoxalines and 2-(pyrazol-4-yl)quinoxalines

The reaction of 6-chloro-2-(l-methylhydrazino)quinoxaline 1-oxide 3 with acetylenedicarboxylates gave the 8-chloro-1-memyl-1,5-dihydropyridazino[3,4-b]quinoxaline-3,4-dicarboxylates 4a,b and 2-(pyrazol-4-yl)quinoxaline 1-oxides 5a,b . The formation of compounds 4a,b would follow the 1,3-dipolar cycloaddition reaction, subsequent 1,2-hydrazino migration, and then dehydrative cyclization, while the production of compounds 5a,b would proceed via the addition of the hydrazino group to acetylene-dicarboxylate leading to the construction of a pyrazole ring, followed by rearrangement of the pyrazole ring. Compounds 5a,b were deoxidized with phosphoryl chloride/N,N-dimethylformamide to change into the 4-(quinoxalin-2-yl)pyrazole-3-carboxylates 8a,b .     

A Novel Synthesis of Some 1,4‐Phenylene‐bis‐heterocyclic Derivatives and of Some Pyran,Pyrano[2,3‐c]pyrazole,and Pyrano[2,3‐d]pyrimidine Derivatives [1]

p‐Diacetyl benzene 1 undergoes bromination to afford p‐bromoacetyl phenacyl bromide 2 . Compound 2 reacts with twofold excess of malononitrile to afford 2‐{2‐[4‐(3,3‐Dicyanopropionyl)‐phenyl]‐2‐oxo‐ethyl}‐malononitrile 3 . Compound 3 could be cyclized to afford the 1,4‐phenylene‐bis‐furan derivative 4 . Compound 3 reacts also with a twofold excess of hydrazine hydrate and phenyl hydrazine under dry conditions at RT to afford the bis‐pyrazole derivatives 5a , 5b , respectively. The reaction of 5a , 5b with the same reagents in refluxing dioxane afforded the bis‐pyrazolopyridazine derivatives 7a , 7b , respectively. The azo coupling of compound 3 with arene diazonium salts afforded the bis‐pyrazole derivatives 9a , 9b , 9c . The β‐keto esters 10a , 10b react with benzaldehyde and malononitrile in a one pot synthesis to afford the pyran derivatives 11a , 11b . These latter compounds react with hydrazine hydrate and urea derivatives to afford the pyrano[2,3‐c]pyrazoles 15a , 15b and the pyrano[2,3‐d]pyrimidine derivatives 17a , 17b , respectively.     

Unique CuI-pyridine based ligands catalytic systems for N-arylation of indoles and other heterocycles

Two pyridine-based ligands (N-((pyridin-2-yl) methyl) pyridin-2-amine) L1 and (N-((pyridin-2-yl) methylene) pyridin-2-amine) L2 are explored in present work which are inexpensive, effective and environmentally benign in their properties. These have been utilized for C-N cross coupling reaction resulting in N-arylation. The N-arylation of indole, imidazole and triazole have been successfully carried out with different aryl and heteroaryl halides using these ligands.     

Pyrazole Based Mono‐ and Di‐Substituted Half Sandwich d6 Platinum Group Metal Complexes: Synthesis and Spectral Characterization

Reactions of pyrazole based ligand and halide bridged arene d⁶ metal precursors resulted a series of mono and di‐substituted pyrazole based half sandwich d⁶ metal complexes. In general, they are formulated as [(arene)MLCl₂] [M = Ru, arene = benzene ( 1 ), p‐cymene ( 2 ), arene = Cp*, M = Rh ( 3 ) and Ir ( 4 )] and [(arene)ML₂Cl] [M = Ru, arene = benzene ( 5 ), p‐cymene ( 6 ), arene = Cp*, M = Rh ( 7 ) and Ir ( 8 )]. All these complexes were characterized by various spectroscopic techniques (IR, ¹H NMR, ESI‐MS, and UV/Vis). The molecular structures were confirmed by single‐crystal X‐ray diffraction technique. Spectroscopic studies revealed that complexation i.e., mono‐ and di‐substitution occurred by the ratio‐based reaction between pyrazole ligand and metal precursor through the neutral nitrogen rather than protic nitrogen. In these complexes deprotonation of the protic nitrogen does not occur unlike the other complexes containing pyrazole derivatives, in which the pyrazole ligand is anionic.     

3,6‐Dinitropyrazolo[4,3‐c]pyrazole‐Based Multipurpose Energetic Materials through Versatile N‐Functionalization Strategies

A family of 3,6‐dinitropyrazolo[4,3‐c]pyrazole‐based energetic compounds was synthesized by using versatile N‐functionalization strategies. Subsequently, nine ionic derivatives of the N,N′‐(3,6‐dinitropyrazolo[4,3‐c]pyrazole‐1,4‐diyl)dinitramidate anion were prepared by acid‐base reactions and fully characterized by infrared, multinuclear NMR spectra, and elemental analysis. The structures of four of these compounds were further confirmed by single‐crystal X‐ray diffraction. Based on their different physical and detonation properties, these compounds exhibit promising potential as modern energetic materials and can be variously classified as green primary explosives, high‐performance secondary explosives, fuel‐rich propellants, and propellant oxidizers.