Amperometric glutamate biosensor based on self-assembling glutamate dehydrogenase and dendrimer-encapsulated platinum nanoparticles onto carbon nanotubes

A novel amperometric biosensor based on self-assembling glutamate dehydrogenase (GLDH) and poly(amidoamine) dendrimer-encapsulated platinum nanoparticles (Pt-PAMAM) onto multiwall carbon nanotubes (CNTs) has been developed for the determination of glutamate. The formation of the self-assembled (GLDH/Pt-PAMAM)_n/CNTs construction was investigated by ζ-potential and high resolution transmission electron microscopy (HRTEM). The results indicated the uniform growth of the layer-by-layer nanostructures onto carboxyl-functionalized CNTs. The electrocatalytic property of the (GLDH/Pt-PAMAM)_n/CNTs modified electrode to glutamate in presence of NAD⁺ (β-nicotinamide adenine dinucleotide, 0.1 mM) was investigated at a low overpotential 0.2 V by electrochemical measurements. The results showed it had series of attractive characteristics, such as a large determination range (0.2-250 μM), a short response time (within 3 s), a high sensitivity (433 μA/mM⁻¹ cm²) and good stability (85% remains after 4 weeks).     

Shape/size-controlled syntheses of metal nanoparticles for site-selective modification of carbon nanotubes

Shape- and size-controlled syntheses of metal nanoparticles have been achieved by galvanic displacement reaction between an aqueous solution of metal salt and Cu foil substrate. In particular, cubic and spheric nanoparticles of Pt (Au) with a fairly narrow size distribution were produced by reacting K(2)PtCl(4) (HAuCl(4)) with a Cu foil in an aqueous medium with and without CuCl(2) under different reaction conditions (e.g., different concentrations and reaction times). In conjunction with the substrate-enhanced electroless deposition (SEED) technique (Qu, L.; Dai, L. J. Am. Chem. Soc. 2005, 127, 10806), the shape/size-controlled syntheses have been successfully exploited to site-selectively deposit these metal nanoparticles onto the outerwall, innerwall, or end-tip of carbon nanotubes (CNTs). Asymmetric sidewall modification by attaching the innerwall and outerwall of CNTs with metal nanoparticles of different shapes was also achieved. Furthermore, it was demonstrated that the nanotube-supported Pt nanoparticles could be converted into hollow Au nanoboxes by galvanic displacement of Pt with Au. These CNT-supported metal nanoparticles were shown to possess interesting optical and electrocatalytic properties.     

氧-硼共修饰多壁碳纳米管载铂催化剂的制备及氧还原活性

采用一种简便的方法,合成了氧-硼共修饰的多壁碳纳米管材料,以此为载体制备的铂基催化剂具有更小的铂粒径、更高的电化学表面积(40 m²·g_Pt^-1)和更高的氧还原活性(0.3 A·mg_Pt^-1)。氧、硼在提高碳纳米管的载体分散性、控制铂颗粒的均匀性和粒径、促进氧还原反应的氧吸附/解离方面发挥着重要的作用。     

氧-硼共修饰多壁碳纳米管载铂催化剂的制备及氧还原活性

采用一种简便的方法,合成了氧-硼共修饰的多壁碳纳米管材料,以此为载体制备的铂基催化剂具有更小的铂粒径、更高的电化学表面积(40 m²·g_Pt^-1)和更高的氧还原活性(0.3 A·mg_Pt^-1)。氧、硼在提高碳纳米管的载体分散性、控制铂颗粒的均匀性和粒径、促进氧还原反应的氧吸附/解离方面发挥着重要的作用。     

纳米金、碳纳米管和纳米线及其在电化学生物传感器研究中的应用

综述了1995～2007年间,纳米金、碳纳米管和纳米线材料及其在电化学生物传感器研究中的新进展,引用文献60篇.     

Natural rubber nanocomposites with SiC nanoparticles and carbon nanotubes

Single-walled carbon nanotubes (SWNTs) and SiC nanoparticles were dispersed in natural rubber (NR) polymer solution and subsequently evaporated the solvent to prepare NR nanocomposites. Using this technique, nanoparticles can be better dispersed in the NR matrix. The influence of nano-fillers on the mechanical properties of the resulting nanocomposites was quantified.Mechanical test results show an increase in the initial modulus with nanoscale reinforcements for up to 50% strain compared to pure NR. The modulus and strength of natural rubber with 1.5% SiC nanoparticles appear to be superior to those of SWNTs with the same filler content. In addition to mechanical testing, these nanocomposites were studied using the SEM and Raman spectroscopy techniques in order to understand the morphology of the resulting system and the load transfer mechanism, respectively. The Raman spectrum of the SWNT/NR system is characterized by a strong band at 1595 cm⁻¹ (G mode—C-C stretching) and other two bands at 1300 cm⁻¹ (D mode-disorder induced) and 2590 cm⁻¹ (D* band). A shift of the 2590 cm⁻¹ Raman band to the lower wavenumber was observed after subjecting SWNT/NR sample to cyclic stress testing. Ageing SWNT/NR specimen in distilled water for 30 days also provided a similar result. The Raman shift in aged samples indicates internal stress transfer from the natural rubber matrix to the SWNTs implying the existence of bonding at the interface.     

Effects of carbon nanotubes on polymer physics

A single carbon nanotube has many similarities with an individual polymer chain including the fact that the end‐to‐end length of both are often about the same and the diameter of the chain is about the same (for single‐walled nanotubes) or only ～10 to 20 times larger (for multiwalled nanotubes). The combination of the solid surface and the similarity of the two materials means that polymer physics are altered in manners not seen with any other type of commonly used filler. The purpose of this review is to update a chapter that appears in a recent tome by Grady (2011) and describe how polymer physics is altered in composites that contain carbon nanotubes. Subjects that will be discussed include chain configuration, glass transition, polymer diffusion, unit cells and crystalline superstructure (lamellae, spherulites and shish‐kebabs), and crystallization kinetics. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Selective adsorption of proteins on single-wall carbon nanotubes by using a protective surfactant

The dispersion of highly hydrophobic carbon materials such as carbon nanotubes in biological media is a challenging issue. Indeed, the nonspecific adsorption of proteins occurs readily when the nanotubes are introduced in biological media; therefore, a methodology to control adsorption is in high demand. To address this issue, we developed a bifunctional linker derived from pyrene that selectively enables or prevents the adsorption of proteins on single-wall carbon nanotubes (SWNTs). We demonstrated that it is possible to decrease or completely suppress the adsorption of proteins on the nanotube sidewall by using proper functionalization (either covalent or noncovalent). By subsequently activating the functional groups on the nanotube derivatives, protein adsorption can be recovered and, therefore, controlled. Our approach is simple, straightforward, and potentially suitable for other biomolecules that contain thio or amino groups available for coupling.     

苯胺在碳纳米管上的吸附特征

苯胺是一种重要的有机化工原料,能通过皮肤和呼吸道进入人体而引起中毒,还会严重污染环境。目前,国内外处理含苯胺废水的方法主要有氧化法、萃取法、生化法、吸附法等。本文使用碳纳米管进行液相吸附除去苯胺。     

Cytotoxicity of carbon nanotubes

With large-scale production and application at large scale, carbon nanotubes (CNTs) may cause ad-verse response to the environment and human health. Thus, study on bio-effects and safety of CNTs has attracted great attention from scientists and governments worldwide. This report briefly summa-rizes the main results from the in vitro toxicity study of CNTs. The emphasis is placed on the descrip-tion of a variety of factors affecting CNTs cytotoxicity, including species of CNTs, impurities contained, lengths of CNTs, aspect ratios, chemical modification, and assaying methods of cytotoxicity. However, experimental information obtained thus far on CNTs' cytotoxicity is lacking in comparability, and some-times there is controversy about it. In order to assess more accurately the potential risks of CNTs to human health, we suggest that care should be taken for issues such as chemical modification and quantitative characterization of CNTs in cytotoxicity assessment. More importantly, studies on physical and chemical mechanisms of CNTs' cytotoxicity should be strengthened; assaying methods and evaluating criteria characterized by nanotoxicology should be gradually established.     

Controlling growth of aligned carbon nanotubes from porous silicon templates

Fabricating well-aligned carbon nanotubes, especially, on a silicon substrate is very important for their applications. In this paper, an aligned carbon nanotube array has been prepared by pyrolysis of hydrocarbons catalyzed by nickel nanoparticles embedded in porous silicon (PS) templates. High-magnification transmission electron microscopy images confirm that the nanotubes are well graphitized. The PS substrates with pore sizes between 10 and 100 nm play a control role on the growth of carbon nanotubes and the diameters of the tubes increase with the enlargement of the pores of the substrates. However, such a control role cannot be found in the macro-PS substrates.     

溶剂热合成碳纳米管

自1991年Iijima发现碳纳米管以来,碳纳米管因其独特的结构和物理化学性质而成为人们的研究热点。     

Photopolymerization of metal nanoparticles on multiwall carbon nanotubes

A facile method for the functionalization of multiwall carbon nanotubes (MWCNT) by photopolymerization of 5-mercapto-2,2'-bithiophene modified metal (Au or Ag) nanoparticles on the surface of the MWCNT is developed.     

Electrodeposition of noble metal nanoparticles on carbon nanotubes

Noble metal nanoparticles can be electrodeposited on carbon nanotubes under potential control. The nanotube sidewalls serve both as the electrodeposition template and as the wire electrically connecting the deposited nanoparticles.     

Fluoride and lead adsorption on carbon nanotubes

The properties and applications of CNT have been studied extensively since Iijima discovered them in 1991[1,2]. They have exceptional mechanical properties and unique electrical property, highly chemical stability and large specific surface area. Thus far, they have widely potential applications in many fields. They can be used as reinforcing materials in composites[3], field emissions[4], hydrogen storage[5], nanoelectronic components[6], catalyst supports[7], adsorption material and so on.…     

Pyrolysis of chloroplatinic acid to directly immobilize platinum nanoparticles onto multi-walled carbon nanotubes

Platinum nanoparticles supported on multi-walled carbon nanotubes (Pt/MWCNTs) were first prepared by simple pyrolysis of H₂PtCl₆ solution. The structure of Pt/MWCNTs was characterized with X-ray diffraction (XRD), scanning electron microscope (SEM), and the results showed that the diameter of the obtained platinum nanoparticles immobilized on MWCNTs was below 50 nm, although the obtained platinum nanoparticles were not well uniformly dispersed on the surface of MWCNTs. The electrocatalytic performance of Pt/MWCNTs electrode for methanol oxidation reaction (MOR) was also investigated by linear sweep voltammetry (LSV), indicating that it was possible to employ the obtained platinum nanoparticles as anode material in fuel cell. Developing a novel and simple method to prepare platinum nanoparticles onto MWCNTs is the main contribution of this letter. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 8, pp. 1050–1053. The text was submitted the authors in English.     

Stability of narrow zigzag carbon nanotubes

First principles calculations of the electronic structure and total energy of narrow zigzag carbon nanotubes and their corresponding flat graphene strips have been carried out to assess the relative stability of the tube form. The results indicate that the smallest energetically stable carbon nanotube has a radius of about 0.2 nm. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2003     

过渡金属氧化物和金属负载型沸石催化剂上合成 纳米碳管及其表征

采用气相催化沉积法催化合成纳米碳管,比较了不同金属氧化物和金属负载型沸石催化剂以及不同分子筛载体对合成纳米碳管的影响,并用TEM,XRD表征其形貌和结晶度,用DTA-TG考察了纳米碳管的热和稳定性。实验结果表明纳米碳管的形成除了与金属种类有关外,还直接与催化剂的颗粒大小和分散状态有关。粒径在20nm左右的不规则形状的纳米粒子是形成纳米碳管的活性组分,非负载和负载型的催化剂均表明活性组分的粒径与纳米碳管的管径有一定的对应关系。化学提纯后能得到高纯度的纳米碳管;其管壁具有较好的石墨化结构,在空气中的热稳定性大于400℃,而在氮气中能维持到1200℃以上。