化学气相沉积对Pt/KL沸石芳构化性能的影响

PT／KL沸石催化剂对正己烷芳构化有很高的活性及选择性，但是至今为止人们对于其中沸石载体是否起到重要作用仍众说不一．为了深入探讨这一问题，有必要了解Pt粒子在KL沸石孔道内的分散状态．但是要测定小于1nm的Pt粒子需要高分辨电镜，受到实验条件的限制．我们知道，化学气相     

Preparation, properties, and reactions of metal-containing heterocycles: Part CV. Synthesis and structure of polyoxadiphosphaplatinaferrocenophanes

A series of novel heterobimetallic crown ether-like polyoxadiphosphaplatinaferrocenophanes cis-[1,1′-Fc(CH₂O(CH₂CH₂O)_nCH₂CH₂PPh₂)₂]PtCl₂ (n=1–3) (4a–c) was synthesized in good yield by cyclization of the bis(phosphine) ligands 1,1′-Fc(CH₂O(CH₂CH₂O)_nCH₂CH₂PPh₂)₂ (n=1–3) (3a–c) and (PhCN)₂PtCl₂ under high dilution conditions in CH₂Cl₂. The bisphosphines 3a–c are obtained by reaction of the corresponding diols 1,1′-Fc(CH₂O(CH₂CH₂O)_nCH₂CH₂OH)₂ (n=1–3) (1a–c) with: (i) CH₃SO₂Cl in CH₂Cl₂ and (ii) LiPPh₂ in THF. Although the X-ray crystal structure of 4a shows that the cavity is large enough for the encapsulation of small metal cations, inclusion experiments of 4a–c with Group 1 cations, and Mg²⁺, or NH₄⁺ in solution applying NMR titration and cyclovoltammetric methods reveal no evidence for the formation of host–guest complexes for 4a,b. In the case of 4c only the addition of Na⁺ or K⁺ leads to an insignificant effect.     

Metallorganische verbindungen der lanthanoide LVIII. Zur struktur des dicyclopentadienyl-bis(trimethylsilyl)lutetat-anions

(C₅H₅)₂Lu(μ-Cl₂)Na(dme)₂ reacts with LiSi(CH₃)₃ in dimethoxyethane with formation of [Li(dme)₃][(C₅H₅)₂Lu(Si(CH₃)₃)₂]. The crystal structure study shows the compound to consist of discrete ions [Li(dme)₃]⁺ and [(C₅H₅)₂Lu(Si(CH₃)₃)₂]⁻. The compound crystallizes in the space group P2/n with a 14.497(5) b 9.041(2), c 14.672(6) Å, β 103.85(3)° and V 1867(2) ų. The crystal and molecular structure was refined to R = 0.0473 for 2491 observed reflections with F_o 3σ(F_o).     

Synthesis and structural behavior of the P-functional organotin chlorides [Ph2P(CH2)3]2SnCl2, Ph2P(CH2)3SnCl2Me, and Ph2P(CH2)nSnCl3 (n=2, 3)

The P-functional organotin dichloride [Ph₂P(CH₂)₃]₂SnCl₂ (3) is synthesized by reaction of Ph₂P(CH₂)₃MgCl with SnCl₄ independently of the molar ratio of the starting compounds. The corresponding organotin trichlorides Ph₂P(CH₂)_nSnCl₂R (4: n=2, R=Cl; 5: n=3, R=Cl; 6: n=3, R=Me) are formed in a cleavage reaction of Ph₂P(CH₂)_nSnCy₃ (n=2, 3) with SnCl₄ or MeSnCl₃, respectively. The main features of the crystal structures of 3–6 are both intra- and intermolecular PSn coordinations and the existence of intermolecular Sn---ClSn bridges. For further characterization of the title compounds, the adducts 4(Ph₃PO)₂ (7) and 5(Ph₃PO) (8), as well as the P-oxides and P-sulfides of 3–6 (9–15), are synthesized. The results of crystal structure analyses of 7, 11, 12, and 14 are reported. The structures of 9–15 are characterized by intramolecular P=XSn interactions (X=O, S). A first insight into the structural behavior of the compounds 3–15 in solution is discussed on the basis of multinuclear NMR data.     

Comparative characteristics of texture and properties of hybrid organic–inorganic adsorbents functionalized by amine and thiol groups

The structure and texture characteristics of the hybrid organic–inorganic adsorbents, which were obtained by using of two-component systems of “structure-forming agent/trifunctional silane”, are compared as follows: the first component is Si(OC₂H₅)₄ or (C₂H₅O)₃Si–A–Si(OC₂H₅)₃, where A = –(CH₂)₂– or –C₆H₄–; the second one is alkoxysilane with amine (–NH₂, NH, –NH(CH₂)₂NH₂) and thiol (–SH) groups. The adsorbents, derived from TEOS, have more accessible functional groups (2.6–4.2 mmol/g) than xerogels, which are based on bis(triethoxysilanes) (1.0–2.6 mmol/g). On another hand xerogels derived from bis(triethoxysilanes) have a more extended porous structure (S_sp =516–968 m²/g, V_s = 0.418–1.490 cm³/g, d = 2.5–15.0 nm) than those that are based on TEOS (S_sp = 4–631 m²/g, V_s = 0.005–1.382 cm³/g, d = 2.3–17.7 nm). The geometric dimensions of functional groups have a more essential effect on the parameters of porous structure in the case of TEOS-derived xerogels. Using solid-state NMR spectroscopy, it has been shown that in synthesis of xerogels with the use of TEOS, the molecular frame of globules is formed by structural units Qⁿ (n = 2,3,4), and the functional groups exist as structural units of Tⁿ (n = 2,3). The xerogels obtained with using bis(triethoxysilanes) consist only of structural units of Tⁿ-type (n = 1,2,3).     

Mononuclear Pt(II) and Pd(II) 1,4-dithiolato complexes. Crystal structures of [Pt((−) DIOS) (PPh3)2] and [Pd(S(CH2) 4S)(Ph2P(CH2) 3PPh2)]. Application in styrene hydroformylation

Addition of 1,4-dithiols to dichloromethane solutions of [PtCl₂(P-P)] (P-P = (PPh₃)₂, Ph₂P(CH₂)₃PPh₂, Phd₂P(CH₂)₄PPh₂; 1,4-dithiols = HS(CH₂)₄SH, (−)DIOSH₂ (2,3-O-isopropylidene-1,4-dithiol-l-threitol), BINASH₂ (1,1′-dinaphthalene-2,2′-dithiol)) in the presence of NEt₃ yielded the mononuclear complexes [Pt(1,4-dithiolato)(P-P)]. Related palladium(II) complexes [Pd(dithiolato)(P-P)] (P-P=Ph₂P(CH₂)₃PPh₂, Ph₂P(CH₂)₄PPh₂; dithiolato = ⁻S(CH₂)₄S⁻, (−)-DIOS) were prepared by the same method. The structure of [Pt((−)DIOS)(PPh₃)₂] and [Pd(S(CH₂)₄S)(Ph₂P(CH₂)₃PPh₂)] complexes was determined by X-ray diffraction methods. Pt—dithiolato—SnC1₂ systems are active in the hydroformylation of styrene. At 100 atm and 125°C [Pt(dithiolate)(P-P)]/SnCl₂ (Pt:Sn = 20) systems provided aldehyde conversion up to 80%.     

Ca-mediated thiolysis of peptide–resin linkage as an option for preparing protected peptide thioesters

A mild new procedure for preparing protected peptide thioesters, based on Ca²⁺-assisted thiolysis of peptide–Kaiser oxime resin (KOR) linkage, is described. Ac-Ile-Ser(Bzl)-Asp(OcHx)-SR (Ac: acetyl; Bzl: benzyl; cHx: cyclohexyl), model peptide, was readily released from the resin by incubating the peptide–KOR at 60 °C in mixtures of DMF with n-butanethiol [R = (CH₂)₃CH₃] or ethyl 3-mercaptopropionate [R = (CH₂)₂COOCH₂CH₃] containing Ca(CH₃COO)₂. After serine and aspartic acid side-chain deprotection under acid conditions, Ac-Ile-Ser-Asp-S(CH₂)₂COOCH₂CH₃ was successfully obtained with good quality and high yield. This type of C-terminal modified peptide may act as an excellent acyl donor in peptide segment condensation by the thioester method, native chemical ligation and enzymatic methods.     

Synthesis and characterization of Na5[Co(CO)3(P{(CH2)nC6H4-P-SO3}3)2], n = 1, 2, 3, and 6. Novel zwitterion

The electron donating water soluble phosphines, P{(CH₂)nC₆H₄-p-SO₃Na}₃,n = 1, 2, 3 and 6, react rapidly with Co₂(CO)₈ under two phase reaction conditions to yield the disproportionation products, [Co(CO)₃(P{(CH₂)nC₆H₄-p-SO₃Na₃}₂] [Co(CO)₄]. Selective precipitation yields the formally zwitterionic complex anions as the sodium salt, [Co(CO)₃(P{(CH₂)nC₆H₄-p-SO₃} ₃)₂]⁵⁻. The anions can be used as precursors to water soluble cobalt hydroformylation catalysts under two phase and supported aqueous phase conditions. The tendency to form alcohol products is low with these complexes. The behavior of the catalysts is consistent with an active species that remains water soluble during the reaction and is not leached into the nonaqueous phase.     

Pyrolysis and film growth studies of phosphinoborane compounds

Chemical vapor deposition experiments were conducted using phosphinoborane compounds of the type [R₂BPR′₂]_n, where R = CH₂CH₃ (1) or CH₃ (2), R′= C(CH₃)₃, and R = CH₂CH₃ (3) or CH₃ (4), R′ = Si(CH₃)₃. Thin films were deposited on Si substrates at 300–850°C under vacuum using 1–3, while no film formed using 4. All films contained considerable carbon (C/B = 0.67–7) and were deficient in phosphorus (P/B = 0-0.5) according to Auger electron spectroscopy. For 3, silicon was incorporated in the films (Si/B = 0.9–2). The preferential loss of phosphorus was nearly complete at higher pyrolysis temperatures that favor formation of carbon-rich films. Volatile products of the decompositions were observed by in situ mass spectroscopy and by ¹H nuclear magnetic resonance analysis of the condensate in a liquid nitrogen cooled trap. The products indicate that β-hydrogen elimination of alkene from boron is a preferred reaction pathway, while concerted elimination reactions appear to be inefficient. Although these phosphinoborane compounds do not appear to be suitable precursors for pure boron phosphide, the B-P-C films obtained are chemically inert and may be of interest as protective coatings.     

Reduction and reductive coupling of imines by Sm(II)-based reagents

The reductive coupling of aldimines and ketimines by a series of Sm(II)-based reagents (SmI₂, SmI₂–HMPA, SmBr₂, Sm{N[Si(CH₃)₃]₂}₂, and SmI₂/triethylamine/water) were examined. In general, aldimines and ketimines were efficiently reduced or coupled using reductants that are more powerful than SmI₂, and the use of Sm{N[Si(CH₃)₃]₂}₂ led to higher diastereoselectivities in reductive coupling reactions. Surprisingly, only the combination of SmI₂/triethylamine/water was capable of reducing and coupling para-substituted benzaldimines and coupling ketimines.     

Crystalline calcium phenylphosphonate—thermodynamic data on n-alkylmonoamine intercalations

Lamellar crystalline calcium phenylphosphonate, as anhydrous Ca(HO₃PC₆H₅)₂ and hydrated Ca(HO₃PC₆H₅)₂·2H₂O compounds, were used as hosts for intercalation of polar n-alkylmonoamine molecules of the general formula CH₃(CH₂)_nNH₂ (n=0–4, 7) in water or 1,2-dichloroethane. An increase in the interlayer distance was observed. The exothermic enthalpic values for intercalation increased with the number of carbon atoms and with increasing concentration of the amines. The intercalation followed by a titration procedure in the solid/liquid interface with Ca(HO₃PC₆H₅)₂·2H₂O and Ca(HO₃PC₆H₅)₂ gave the enthalpy/number of carbons correlations: Δ_intH=−(1.74±0.43)–(1.30±0.13)n_c and Δ_intH=−(4.15±0.15)–(1.07±0.03)n_c, for water and 1,2-dichloroethane, respectively. A similar correlation Δ_intH=−(4.27±0.80)–(1.85±0.21)n_c was obtained in water by using the ampoule breaking procedure for Ca(HO₃PC₆H₅)₂·2H₂O. The increase in exothermic enthalpic values with the increase in n-aliphatic carbon atoms is more pronounced for the anhydrous compound and also when using the ampoule breaking procedure. The Gibbs free energies are negative. Positive entropic values favor intercalation in these systems.     

Exchange reactions of distibines

Distibines of the type R₂SbSbR′₂ with R = CH₃, R′ = C₂H₅ (1), R = CH₃, R′= n-C₃H₇ (2), R = CH₃, R′= C₆H₅ (3), R = C₂H₅, R′= C₆H₅ (4), R = n-C₃H₇, R′ = C₆H₅ (5), and R = CH₃, R′ = 2,4,6-(CH₃)₂C₆H₂ (6) are formed in equilibria by exchange reactions of the respective distibines of the type R₄Sb₂ and R′₄Sb₂.     

Interaction of antitumor drug Sn(CH3)2Cl2 with DNA and RNA

Sn(CH₃)₂Cl₂ exerts its antitumor activity in a specific way. Unlike anticancer cis-Pt(NH₃)₂Cl₂ drug which binds strongly to the nitrogen atoms of DNA bases, Sn(CH₃)₂Cl₂ shows no major affinity towards base binding. Thus, the mechanism of action by which tinorganometallic compounds exert antitumor activity would be different from that of the cisplatin drug. The aim of this study was to examine the binding of Sn(CH₃)₂Cl₂ with calf thymus DNA and yeast RNA in aqueous solutions at pH 7.1–6.6 with constant concentrations of DNA and RNA and various molar ratios of Sn(CH₃)₂Cl₂/DNA (phosphate) and Sn(CH₃)₂Cl₂/RNA of 1/40, 1/20, 1/10, 1/5. Fourier transform infrared (FTIR) and UV–visible difference spectroscopic methods were used to determine the Sn(CH₃)₂Cl₂ binding mode, binding constant, sequence selectivity and structural variations of Sn(CH₃)₂Cl₂/DNA and Sn(CH₃)₂Cl₂/RNA complexes in aqueous solution. Sn(CH₃)₂Cl₂ hydrolyzes in water to give Sn(CH₃)₂(OH)₂ and [Sn(CH₃)₂(OH)(H₂O)_n]⁺ species. Spectroscopic evidence showed that interaction occurred mainly through (CH₃)₂Sn(IV) hydroxide and polynucleotide backbone phosphate group with overall binding constant of K(Sn(CH₃)₂Cl₂–DNA)=1.47×10⁵ M⁻¹ and K(Sn(CH₃)₂Cl₂–RNA)=7.33×10⁵ M⁻¹. Sn(CH₃)₂Cl₂ induced no biopolymer conformational changes with DNA remaining in the B-family structure and RNA in A-conformation upon drug complexation.     

Gas and solution phase chloroiodomethane short-time photodissociation dynamics in the B-band absorption

Resonance Raman spectra were obtained within and to the red of the B-band absorption spectrum of gas phase chloroiodomethane and chloroiodomethane in cyclohexane solvent. The spectra show the fundamental and overtones of the nominal C---I stretch (nν₅) and combination bands of the CH₂ wag (ν₃), I---C---Cl bend (ν₆), and the CH₂ scissor (ν₂) fundamentals with the C---I stretch bands (nν₅). The chloroiodomethane B-band short-time photodissociation dynamics have significant substituent effects relative to the B-band of iodomethane due to the presence of the C---Cl chromophore n(X) → σ^* (C---X) transitions ≈170 nm that are close to the B-band absorption of chloroiodomethane but absent in iodomethane.     

Synthesis and chemistry of the bis(trimethylsilyl)amido bis-tetrahydrofuranates of the group 2 metals magnesium, calcium, strontium and barium. X-ray crystal structures of Mg[N(SiMe3)2]2·2THF and related Mn[N(SiMe3)2]2·2THF

Transamination reactions utilizing the compound mercuric bis(trimethylsilyl)amide, Hg{N(SiMe₃)₂}₂, in tetrahydrofuran (THF), and the metals Na, Mg, Ca, Sr, Ba and Al have been investigated. Thus the THF solvated compounds Na[N(SiMe₃)₂]·THF and M[N(SiMe₃)₂]₂·2THF, M = Mg, Ca, Sr and Ba (1–4), have been prepared. The X-ray crystal structures of 1 and the related manganese compound Mn[N(SiMe₃)₂]₂·2THF (5) are reported. Interaction of the silylamides, 2–4, with a range of crown ethers apparently proceeded with elimination of silylamine, (Me₃Si)₂NH, and novel ring opening of the crown ethers, generating species containing a donor alkoxide ligand with a vinyl ether function, presumably, ---O(CH₂CH₂O)_nCH=CH₂ (n = 3−5). The silylamides 2–4 were also cleanly converted to the corresponding alkoxides (from ¹H NMR data) in reactions with stoichiometric quantities of 3-ethyl-3-pentanol.     

Heterobimetallic Mo---Sn complexes. Reactions of [Mo(CO)3(CH3CN)2(Cl)(SnRCl2)] (R = Me, Ph) with 4(4-XC6H4)3 (X = Cl, F, H, Me, MeO)

Three families of heterobimetallic compounds were obtained by reaction of [Mo(CO)₃(CH₃CN)₂(Cl)(SnRCl₂)] (R = Ph, Me) with P(4-XC₆H₄)₃ (X = Cl, F, H, Me, MeO). The type of compound obtained dependent on the solvent and concentration of the starting compound. So, [Mo(CO)₂(CH₃COCH₃)₂(PPh₃)(Cl)(SnRCl₂)]·nCH₃COCH₃ (R = Ph, n = 0.5; R = Me, n = 1) (type I) and [Mo(CO)₃{P(4-XC₆H₄)₃}(μ-Cl)(SnRCl₂)]₂ (R = Ph, X = Cl, F, H, Me, MeO; R = Me, X = Cl, F) (type II) were isolated from acetone solution in ca 0.05 M and 0.1 M concentrations, respectively. However, [Mo(CO)₃(CH₃CN) {P(4-XC₆H₄)₃}(Cl)(SnRCl₂)] (R = Ph, X = H; R = Me, X = Cl, F, H) (type III) were obtained from dichloromethane solution independently of the concentration used. All new complexes showed a seven-coordinate environment at molybdenum, containing Mo---Cl and Mo---Sn bonds. Mössbauer spectra indicated a four-coordination at tin for type III complexes.     

Synthesis and characterization of planarly chiral nonbridged bis(1-R-indenyl) zirconium dichloride complexes and X-ray structure of rac-[(η-C9H6-1-C(CH3)2---o-C6H4---OCH3)2ZrCl2]·THF

Reactions of the lithium salts of 3-substituted indenes 1, 2 with ZrCl₄(THF)₂ gave two series of nonbridged bis(1-substituted)indenyl zirconocene dichloride complexes. Fractional recrystallization from THF–petroleum ether furnished the pure racemic and mesomeric isomers of [(η⁵-C₉H₆-1-C(R¹)(R²)---o-C₆H₄---OCH₃)₂ZrCl₂]·nTHF (R¹=R²=CH₃, n=1, rac-1a and meso-1b; R¹=CH₃, R²=C₂H₅; n=0.5 or 0, rac-2a and meso-2b), respectively. Complex 1a was further characterized by X-ray diffraction to have a C₂ symmetrically racemic structure, where the six-member rings of the indenyl parts are oriented laterally and two o-CH₃O---C₆H₄---C(CH₃)₂--- substituents are oriented to the open side of the metallocene (Ind: bis-lateral, anti; Substituent: bis-central, syn). The four zirconocene complexes are highly symmetrical in solution as characterized by room temperature ¹H-NMR, however ¹H–¹H NOESY of meso-1b shows that some of the NOE interactions arise from the two separated indenyl parts of the same molecule, which can only be well explained by taking into account the torsion isomers in solution.     

Syntheses, spectroscopic characteristics and thermolytic rearrangements of bis-[(trimethylgermyl)methyl]platinum(II) and bis-[(trimethylstannyl)methyl]platinum(II) complexes

The preparations and spectroscopic characteristics are reported of a series of (trimethylgermyl)methyl- and (trimethylstannyl)methylplatinum(II) complexes with diene and P-donor ancillary ligands, cis-Pt(CH₂GeMe₃)₂L₂ (L = PPh₃ or PPh₂Me; L₂ = dppe or cod) and cis-Pt(CH₂SnMe₃)₂L₂ (L = PPh₃; L₂ =cod). Thermolysis of toluene solutions of cis-Pt(CH₂GeMe₃)₂(PPh₃)₂ leads to cis-Pt(Me)(CH₂GeMe₂CH₂GeMe₃)(PPh₃)₂ via β-alkyl migration, after (non-rate-limiting) phosphine dissociation. Estimated activation parameters (ΔH_{298 K}^‡ = 126 ± 3 kJ mol⁻¹, ΔS^‡ = + 17 ± 7 J mol⁻¹ K⁻¹ and hence Δ_{298 K}^‡ = 121 ± 5 kJ mol⁻¹) suggest that this system is more migration labile than its silicon analogue, primarily as a result of a lower activation enthalpy. While cis-Pt(CH₂GeMe₃)₂(PPh₂Me)₂ reacts similarly but less readily, Pt(CH₂GeMe₃)₂(dppe)₂ is inert at operable temperatures. Thermolysis of Pt(CH₂GeMe₃)₂(cod) generates 1,1,3,3,-tetramethyldi-1,3-germacyclobutane as the major organogermanium product, while from cis-Pt(CH₂SnMe₃)₂(PPh₃)₂, 1,1,3,3-tetramethyldi-1,3-stannacyclobutane predominates. Mechanistic implications are discussed.     

新型双苯并环己酮芳亚胺镍(Ⅱ)催化降冰片烯与甲基丙烯酸丁酯共聚合

采用自制的新型双苯并环己酮芳亚胺镍催化剂双苯并环己酮-2,6-二甲基苯亚胺镍(Ⅱ)(Ni{C₁₀H₈(O)C[2,6-C₆H₃(CH₃)₂N]CH₃}₂, C1)和双苯并环己酮-2,6-二氯苯亚胺镍(Ⅱ)(Ni{C₁₀H₈(O)C[2,6-C₆H₃Cl₂N]CH₃}₂, C2)与三五氟苯硼[B(C₆F₅)₃]结合, 在一定的反应条件下可高效催化降冰片烯(NB)与甲基丙烯酸正丁酯(n-BMA)的乙烯基加成共聚合. 提出了催化聚合时存在的可能失活机理; 研究了不同单体投料比对催化活性、 产率及产物性能的影响. 根据Kelen-Tüdõs方法分别估算出2种单体在不同催化体系下的竞聚率, 即当催化体系为C1/B(C₆F₅)₃时, 竞聚率r_n-BMA=0.02, r_NB=16.28, r_NB·r_n-BMA=0.32; 当催化体系为C2/B(C₆F₅)₃时, r_n-BMA=0.01, r_NB=64.83, r_NB·r_n-BMA=0.65. 结果表明, 2种单体在2种体系催化下均为无规共聚合.     

Filling of antibonding orbitals—II Chemical bond properties

Antibonding effects, which accompany double-bonding in saturated compounds, account for many chemical bond lengths which are anomalous on the basis of electronegativity. Double-bonding influences the Pauling Electronegativity values of N, O, F, Al and Si and also widens the interbond angles in molecules such as (CH₃)₃N, (CF₃)₃N, (CH₃)₂O and (CF₃)₂O.