A new kind of chiral‐dendronized binaphthyl‐containing polyfluorene derivatives has been synthesized through “click chemistry” efficiently. The resulting copolymers exhibited desirable properties, such as excellent solubility, good thermal stability, and considerably high molecular weights. The photophysical properties of the copolymers were investigated in details, and the results indicated that the combination of chiral binaphthyl unit and bulky dendron could effectively suppress intermolecular packing and aggregation. In addition, the investigation of circular dichroism behavior of these chiral‐dendronized copolymers showed a strong Cotton effect at long wavelength (373–379 nm), indicating that the chirality of the binaphthyl units was transferred to the whole polyfluorene backbone.
Perfectly alternating copolymers can be synthesised by reacting diacrylates with terminal dienes using alternating diene metathesis polycondensation (ALTMET). This novel method is very versatile and allows preparation of diverse structures of polymers, including main‐chain liquid crystalline polymers.
Main‐chain liquid crystalline polymer obtained by ALTMET. 相似文献
Copolymerization of hepta‐1,6‐diene with ethylene using a cobalt–bis(imino)pyridine complex affords a polymer that contains trans‐1,2‐five‐membered rings in the repeating unit from hepta‐1,6‐diene. The ratio of the repeating units of diene to those of ethylene is controlled from 3: 97 to 50:50, depending on the reaction conditions. Isotope‐labeling reactions reveal that the major chain transfer pathway involves β‐hydrogen elimination of the polymer end formed after ethylene insertion.
A series of π‐conjugated polymers linked by benzocarborane (1,2‐(buta‐1′,3′‐diene‐1′,4′‐diyl)‐1,2‐dicarbadodecaborane) were synthesized via Sonogashira–Hagihara polycondensation reaction. The opened molecular structure of diiodo monomer containing benzocarborane resulted in fast polymerization and high molecular weights. The obtained polymers were fully characterized by 1H, 13C, and 11B NMR spectroscopies. UV‐vis absorption and photoluminescence studies revealed the acceptor‐profile of benzocarborane. Unlike the polymers linked by o‐carborane, these polymers exhibited strong luminescence in the solution state, presumably because the inductive effect of carborane is dominant, rather than cage‐π interactions.
Ring‐opening metathesis polymerization (ROMP) was used for the synthesis of monolithic capillary columns with inner diameters of 200 µm. The resulting polymeric monoliths were characterized by inverse size‐exclusion chromatography (ISEC). Surface functionalization was carried out in situ using 2‐(N,N‐dimethylaminoethyl)norborn‐5‐ene‐2‐ylcarboxylic amide ( 1 ). The resulting functionalized monoliths were successfully used in anion‐exchange chromatography of oligodeoxynucleotides.
The synthesis of branched macromolecules from renewable resources via olefin metathesis is described. We observed that it is possible to control the molecular weight during the acyclic triene metathesis (ATMET) of a triglyceride by the application of methyl acrylate as a chain stopper for this straightforward one step one pot polymerization. The resulting branched materials were characterized by GPC, NMR as well as ESI‐MS and the combination of these techniques provided valuable insights into the polymer structure as well as occurring side reactions during this olefin metathesis polymerization reaction.
Readily water‐soluble PEGylated amphiphiles containing bis‐thiourea‐based molecular recognition units at the interface of hydrophobic and hydrophilic blocks are developed. Self‐assembly of these amphiphiles is found to be dependent on the exact chemical composition of the hydrophobic component. Elongated, spherical, and disk‐like micelles are formed with the change in hydrophobic group from stearyl (2A), oleyl (2B), and dodecanol (2C), respectively. The length of the rod‐like elongated micelles formed by 2A could be tuned by thermal treatment as well. Synthesis and detailed structural characterization of these amphiphiles by TEM, DSC, synchrotron SAXS techniques are reported. Organic solvent‐free direct aqueous encapsulation of doxorubicin, an anticancer drug into these nanostructures is demonstrated.
A nickel α‐diimine catalyst was used for Grignard metathesis (GRIM) polymerization of 2,5‐dibromo 3‐hexylthiophene and 2‐bromo‐5‐iodo‐3‐hexylthiophene monomers. GRIM polymerization of 2‐bromo‐5‐iodo‐3‐hexylthiophene generated regioregular polymers with molecular weights ranging from 3 000 to 12 000 g · mol−1. The nickel α‐diimine catalyst was also successfully used for the GRIM polymerization of a bulky benzodithiophene monomer.
13C solid‐state exchange NMR is applied to study the influence of morphology on chain diffusion between crystalline and noncrystalline regions in ultrahigh molecular weight linear polyethylene (PE). Lamellar‐doubling reduces the exchange rate by a factor of two indicating that the chain diffusion coefficient is largely independent of the lamellar thickness. This is discussed in terms of molecular processes in the crystallites leading to chain diffusion, confirming that the role of defects is minor compared to helical jumps of extended stems. Hindrance of the chain diffusion resulting from chain entanglements was only observed after the chains diffuse over long distances. Moreover, the role of the interphase between the noncrystalline and the crystalline regions on chain diffusion is discussed.
Summary: A bacterial poly[(3‐hydroxybutyrate)‐co‐(3‐hydroxyvalerate)] biosynthesized by Pseudomonas sp. HJ‐2 was found to be a shape memory polymer. Permanent shapes were set by annealing at room temperature the samples that had been pre‐treated above 95 °C in specified shapes. The temporary shapes were set by stretching and holding the elongated samples. Thermal shrinkage began at 45 °C and stopped at 75 °C to recover to their permanent shapes. Apparently, the orientation induced the formation of hard segments that were responsible for setting the temporary shapes. The shape memory effect of this polymer was explained based on the DSC and XRD results at different phases.
The recovery of a coil shape upon heating a strip of HJ‐2 PHB35V, demonstrating the polymers shape memory effect. 相似文献
Polycarbonate/polyethylene random block copolymers (RBCs) have been produced using olefin metathesis catalysis in a process termed segment interchange metathesis. An olefin metathesis catalyst tolerant of polar functionality was added to reagent polycarbonate and polyethylene polymers which contained internal unsaturated carbon–carbon bonds. Subsequent metathesis occurred, segmenting the reagent polymers, resulting in RBCs. The block copolymers self-assembled into microphase structures which persisted into the melt state as determined by small angle X-ray scattering (SAXS).
Amphiphilic hybrid π‐conjugated polymers that have polyhedral oligomeric silsesquioxanes on their side chains have been successfully synthesized by the Sonogashira–Hagihara polycondensation reaction. The obtained polymers were studied with ultraviolet‐visible absorption and photoluminescence spectra. In these polymers, the π‐conjugation length was extended along the poly(p‐phenylene‐ethynylene) backbone. Furthermore, the content of the POSS substituents can influence the aggregation behavior of the polymers and subsequent luminescent properties.
Fully conjugated block copolymers containing 1,4‐ and 1,3‐phenylenevinylene repeating units can be prepared by the sequential ring opening metathesis polymerization of strained cyclophanedienes, initiated by ruthenium carbene complexes (Grubbs metathesis catalysts). The molecular weight of the constituent blocks can be tightly controlled by changing the catalyst to monomer ratio and the volume fraction of the block copolymers independently tailored by the ratio of the monomers employed. Extensive phase separation between the constituent blocks is observed in thin films of these polymers by atomic force microscopy and efficient energy transfer between blocks containing 1,4‐ and 1,3‐phenylenevinylene units can be seen in the photoluminescence of these materials.
A water‐soluble, sulfur‐containing fluorescent conjugated polymer exhibits a visible fluorescence color change for detection of mercury in the presence of thymine. A new concept provides the design of a sensor ensemble using a simple combination method. This strategy avoids the need for complicated design and synthesis of a recognition group, eliminating the tedious synthetic efforts for the preparation of a sensor material.
Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.
A series of random copolymers and block copolymers containing water‐soluble 4AM and fluorescent VAK are synthesized by NMP. The homopolymerizations of 4AM and VAK and 4AM/VAK random copolymerization are performed in 50 wt% DMF using 10 mol% SG1, resulting in a linear increase in versus conversion, and final polymers with narrow molecular weight distributions ( < 1.4). Reactivity ratios rVAK = 0.64 ± 0.52 and r4AM = 0.86 ± 0.66 are obtained for the 4AM/VAK random copolymerization. In addition, a poly(4AM) macroinitiator is used to initiate a surfactant‐free suspension polymerization of VAK. After 2.5 h, the resulting amphiphilic block copolymer has = 12.6 kg · mol?1, = 1.48, molar composition FVAK = 0.38 with latex particle sizes between 270 and 475 nm.
Three‐ and four‐arm star shaped polymers, as well as diblock copolymers, are synthesized via acyclic diene metathesis (ADMET) polymerization. This is accomplished by using an asymmetric α,ω‐diene containing a terminal double bond and an acrylate, which is polymerized in the presence of multifunctional acrylates as selective and irreversible chain transfer agents using Hoveyda‐Grubbs second generation catalyst. High cross‐metathesis selectivities are achieved at low temperatures enabling good control over molecular weights. Furthermore, additional polyethyleneglycol (PEG) blocks are attached to these polymers via Heck coupling of the acrylate end‐groups of these polymers with aryl iodide functionalized PEG, obtaining three‐ and four‐arm star shaped di‐ and triblock copolymers with molecular weights up to 31 kDa.
It is the general consensus that in Gilch polymerizations the 1,4‐bis(chloromethylene)benzene starting material first changes into p‐quinodimethane intermediates which then act as the real monomers. However, direct observation of these intermediates has not been possible so far. This is because usually the p‐quinodimethane auto‐initiates its rapid radical polymerization instantaneously, keeping its concentration extremely low throughout the whole process. Here it is shown that, when the reaction is carried out at very low temperatures, the formation of p‐quinodimethane still proceeds but chain growth is suppressed. Hence, the concentration of the active monomer reaches a level sufficient for NMR analysis.
A new copolymer bearing a cysteine moiety, designed for molecular interaction, metal‐ion detection, and chiral recognition, was synthesised starting from the dibromo derivative of methyl N‐(tert‐butoxycarbonyl)‐S‐thien‐3‐ylcysteinate and distannylthiophene through a Stille coupling reaction. UV‐vis spectroscopy, circular dichroism, NMR spectroscopy, and gel permeation chromatography analyses evidenced that this polymer is able to form self‐assembling structures, through the formation of a hydrogen‐bond network, not only in the solid state but also in solution.
