Multiband terahertz metamaterial absorber

This paper reports the design of a multiband metamaterial (MM) absorber in the terahertz region. Theoretical and simulated results show that the absorber has four distinct and strong absorption points at 1.69, 2.76, 3.41 and 5.06 THz, which are consistent with `fingerprints' of some explosive materials. The retrieved material parameters show that the impedance of MM could be tuned to match approximately the impedance of the free space to minimise the reflectance at absorption frequencies and large power loss exists at absorption frequencies. The distribution of the power loss indicates that the absorber is an excellent electromagnetic wave collector: the wave is first trapped and reinforced in certain specific locations and then consumed. This multiband absorber has applications in the detection of explosives and materials characterisation.     

太赫兹频域的强双带特异材料吸收体

We report the design and simulation of a dual-band perfect terahertz absorber which is composed of an electric Split-Resonance-Ring（eSRR） layer, polyimide spacer and a metal plate layer. The absorber has two near-unity absorptions near 0. 502 THz and 0. 942 THz and both are related to the LC resonance of the eSRR. The results show that the designed terahertz absorber is an excellent electromagnetic wave concentrator. The electromagnetic waves are firstly converged into the spacer and the eSRR layer and are then significantly absorbed.     

Actively tunable dual-broadband graphene-based terahertz metamaterial absorber

A tunable metamaterial absorber (MA) with dual-broadband and high absorption properties at terahertz (THz) frequencies is designed in this work. The MA consists of a periodic array of flower-like monolayer graphene patterns at top, a SiO₂ dielectric spacer in middle, and a gold ground plane at the bottom. The simulation results demonstrate that the designed MA has two wide absorption bands with an absorption of over 90% in frequency ranges of 0.68 THz-1.63 THz and 3.34 THz-4.08 THz, and the corresponding relative bandwidths reach 82.3% and 20%, respectively. The peak absorptivity of the absorber can be dynamically controlled from less than 10% to nearly 100% by adjusting the graphene chemical potential from 0 eV to 0.9 eV. Furthermore, the designed absorber is polarization-insensitive and has good robustness to incident angles. Such a high-performance MA has broad application prospects in THz imaging, modulating, filtering, etc.     

太赫兹频域的强双带特异材料吸收体(英文)

We report the design and simulation of a dual-band perfect terahertz absorber which is composed of an electric Split-Resonance-Ring(eSRR) layer, polyimide spacer and a metal plate layer. The absorber has two near-unity absorptions near 0.502 THz and 0.942 THz and both are related to the LC resonance of the eSRR. The results show that the designed terahertz absorber is an excellent electromagnetic wave concentrator. The electromagnetic waves are firstly converged into the spacer and the eSRR layer and are th...     

工字形太赫兹超材料吸波体的传感特性研究

利用超材料吸波体对材料参数的电磁响应, 可将其应用于传感. 本文设计了一种工字形单元结构的超材料吸波体, 基于频域算法对其在太赫兹频段的传感特性进行数值模拟, 研究了待测样品折射率、厚度及电介质隔层厚度对超材料吸波体传感器的频率灵敏度、振幅灵敏度及品质因数的影响. 研究结果表明:当待测样品厚度为40 μm时, 折射率频率灵敏度可达到153.17 GHz/RIU, 折射率振幅灵敏度可达到41.37%/RIU; 待测样品折射率一定时, 厚度频率灵敏度随其厚度的增大而线性减小; 随着待测样品厚度的增加, RFOM呈增大趋势, 但增大幅度在逐渐减小; TFOM随待测样品厚度的增加而减小.     

太赫兹波段电磁超材料吸波器折射率传感特性

太赫兹超材料吸波器作为一类重要的超材料功能器件,除了可以实现对入射太赫兹波的完美吸收外,还可以作为折射率传感器实现对周围环境信息变化的捕捉与监测.通常从优化表面金属谐振单元结构和改变介质层材料和形态两个方面出发,改善太赫兹超材料吸波器的传感特性.为深入研究中间介质层对太赫兹超材料吸波器传感特性的影响,本文基于金属开口谐...     

Optical strong coupling in hybrid metal-graphene metamaterial for terahertz sensing

We propose a terahertz hybrid metamaterial composed of subwavelength metallic slits and graphene plasmonic ribbons for sensing application. This special design can cause the interaction between the plasmon resonances of the metallic slits and graphene ribbons, giving rise to a strong coupling effect and Rabi splitting. Intricate balancing in the strong coupling region can be perturbed by the carrier concentration of graphene, which is subject to the analyte on its surface. Thereby, the detection of analyte can be reflected as a frequency shift of resonance in terahertz transmission spectra. The result shows that this sensor can achieve a theoretical detection limit of 325 electrons or holes per square micrometer. Meanwhile, it also works well as a refractive index sensor with the frequency sensitivity of 485 GHz/RIU. Our results may contribute to design of ultra-micro terahertz sensors.     

Design of a multiband terahertz perfect absorber

A thin-flexible multiband terahertz metamaterial absorber(MA) has been investigated. Each unit cell of the MA consists of a simple metal structure, which includes the top metal resonator ring and the bottom metallic ground plane,separated by a thin-flexible dielectric spacer. Finite-difference time domain simulation indicates that this MA can achieve over 99% absorption at frequencies of 1.50 THz, 3.33 THz, and 5.40 THz by properly assembling the sandwiched structure.However, because of its asymmetric structure, the MA is polarization-sensitive and can tune the absorptivity of the second absorption peak by changing the incident polarization angle. The effect of the error of the structural parameters on the absorption efficiency is also carefully analyzed in detail to guide the fabrication. Moreover, the proposed MA exhibits high refractive-index sensing sensitivity, which has potential applications in multi-wavelength sensing in the terahertz region.     

Dual-band and polarization-insensitive terahertz absorber based on fractal Koch curves

We report the design, fabrication, and characterization of a dual-band and polarization-insensitive metamaterial ab-sorber （MA）, which consists of periodically arranged fractal Koch curves acting as the top resonator array and a metallic ground plane separated by a dielectric spacer. Compared with conventional MAs, a more compact size and multi-frequency operation are achieved by using fractal geometry as the unit cell of the MA. Both the effective medium theory and the multi- reflection interference theory are employed to investigate the underlying physical mechanism of the proposed terahertz MA, and results indicate that the latter theory is not suitable for explaining the absorption mechanism in our investigated struc-ture. Two absorption peaks are observed at 0.226 THz and 0.622 THz with absorptivities of 91.3% and 95.6% respectively and good agreements between the full-wave simulation and experimental results are achieved.     

Sensitive distinction between herbs by terahertz spectroscopy and a metamaterial resonator

Terahertz spectroscopy, combined with a metamaterial resonator, was used to distinguish varieties of herbs that look alike to the naked eye. The metamaterial resonator, based on an ohm-ring, was experimentally demonstrated to exhibit two significant resonant peaks in the range from 0.2 to 1.4?THz. The resonant peaks were shifted to lower frequency with changes of the surface permittivity, and this feature was applied to identify varieties of herbs. In the experiment, different borneols were effectively identified according to the different degree of redshift. This work demonstrates that metamaterial resonator is a sensitive tool for terahertz spectral sensing, and shows a new detection method for different herbs.     

Strong and broadband terahertz absorber using SiO_2-based metamaterial structure

We design and experimentally demonstrate a broadband metamaterial absorber in the terahertz(THz) band based on a periodic array of aluminum(Al) squares with two different sizes. A thin silicon dioxide(SiO2) film rather than a conventional polyimide(PI) layer is used as a dielectric spacer to separate Al squares from the platinum(Pt) ground plane in our design, which significantly improves the design precision and the feasibility of the device fabrication. The combination of different sizes of Al squares gives rise to an absorption bandwidth of over 210 GHz with an absorption of over 90%. Our results also show that our device is almost polarization-insensitive. It works very well for all azimuthal angles with an absorption of beyond 80%.     

Strong and broadband terahertz absorber using Si02-based metamaterial structure

We design and experimentally demonstrate a broadband metamaterial absorber in the terahertz （THz） band based on a periodic array of aluminum （A1） squares with two different sizes. A thin silicon dioxide （SiO2） film rather than a conventional polyimide （PI） layer is used as a dielectric spacer to separate A1 squares from the platinum （Pt） ground plane in our design, which significantly improves the design precision and the feasibility of the device fabrication. The combination of different sizes of AI squares gives rise to an absorption bandwidth of over 210 GHz with an absorption of over 90%. Our results also show that our device is almost polarization-insensitive. It works very well for all azimuthal angles with an absorption of beyond 80%.     

基于超材料的偏振不敏感太赫兹宽带吸波体设计

本文设计了一种基于超材料的偏振不敏感太赫兹宽带吸波体.吸波体包含两层金属和一层中间介质,表面金属层每一个周期单元由五种尺寸接近的金属块按照相邻不同的规律排列成5×5的方形阵列.各种尺寸金属块分别产生单峰谐振吸收,五个谐振吸收峰相互靠近从而产生宽带吸收.通过研究吸波体表面电流和电场z分量分布情况可知,入射太赫兹能量的吸收主要是由y方向上电场引起的电偶极子振荡和z方向上磁场引起的磁极化产生,而且金属层的欧姆损耗起主要作用.仿真结果表明,吸波体吸收率在80%以上的带宽约为1.2 THz,最高吸收率可达98.7%,半峰全宽(FWHM)为1.6 THz,该宽带吸波体的厚度约为中心波长的二十分之一,对偏振方向不敏感,且能实现大角度吸收,在太赫兹频段的电磁隐身、测辐射热探测器以及宽带通信等领域有潜在的应用价值.     

基于圆台结构的超宽带极化不敏感太赫兹吸收器

本文提出一种基于圆台形吸收单元的超宽带、极化不敏感的超材料太赫兹吸收器. 该超材料吸收器采用金属薄膜金和介质层二氧化硅交替叠加的多层结构. 采用商业软件CST Studio Suite 2009时域求解器计算了其在0–10 THz波段内的吸收率A（ω）,在2–10 THz之间实现了对入射太赫兹波的超宽频带强吸收. 仿真结果表明,由于其圆台形单元结构,在器件垂直方向上形成一系列不同尺寸的微型吸收器,产生了吸收频点相连的多频吸收峰. 利用不同吸收峰的耦合叠加效应,获得超过8 THz的超宽带太赫兹波吸收,吸收强度达到92.3%以上. 这一结构具有超宽带强吸收,360°极化不敏感以及易于加工等优越特性,因而在太赫兹波探测器、光谱成像以及隐身技术方面具有潜在的应用. 关键词： 太赫兹波 超材料吸收器 圆台结构 超宽带     

基于谐振环的太赫兹宽带偏振转换器件研究

提出了一个基于谐振环结构的宽带且高效的太赫兹线偏振转换器.该结构由金属-电介质-金属三层构成,位于顶层的是基于开口谐振环的超表面,中间为介质层,底部为金属板.实验结果表明,该结构可以在0.59-1.24 THz频率范围内将线偏振的太赫兹波偏振方向旋转90°,转换率超过80%.通过计算该结构在所研究的频率范围内反射光的偏振角和椭圆角,证实了该结构可以在较宽的频率范围内实现高效的线偏振转换.对该结构在偏振转换率高的频率下表面电流和电场进行仿真,分析了高偏振转换率和宽带的机理.同时,研究了该结构的偏振转换率对入射角以及偏振角的依赖性,结果表明该结构在0°-30°入射角范围内、-10°-10°偏振角范围内均有很好的偏振转换性能.     

A metamaterial absorber with direction-selective and polarisation-insensitive properties

This paper reports the design of a metamaterial absorber with direction-selective and polarisation-insensitive property.Both theoretical and simulated results reveal that the absorber has a distinct absorption point with direction selectivity at 7.48 GHz,which is related to the resonance of the metamaterial and is not influenced by the polarisation.The retrieved impedance indicates that the impedance of the absorber can be tuned to approximatively match the impedance of the free space on one side and not to match the impedance of the free space on the other side.This design can result in the minimal reflectance,the minimal transmission and the highest absorbance at the absorption frequency.The distribution of the power loss indicates that the absorber is an excellent electromagnetic wave collector:the wave is first trapped and reinforced in certain specific locations,and then mostly consumed.The distribution of the surface current is consistent with the design,the retrieved impedance and the distribution of the power loss.This absorber may have applications in many scientific and technological areas.     

一种极化不敏感和双面吸波的手性超材料吸波体

基于手性结构设计了一种极化不敏感和双面吸波的超材料吸波体.该吸波体的结构单元由手性结构和介质基板组成.仿真的电磁波正、反向入射时超材料吸波体的吸收率表明:该吸波结构的正、反面是互易的,具有双面吸波特性.仿真的不同极化角下超材料吸波体的吸收率表明:该超材料吸波体具有极化不敏感特性.仿真的不同入射角下超材料吸波体的吸收率表明:该超材料吸波体的入射角较窄.仿真的吸波体单元的表面电流和磁能密度分布表明:电、磁场之间存在交叉耦合,吸波与手性有关.仿真的不同损耗情况下超材料吸波体的吸收率表明:基板的介质损耗在吸波过程中起主导作用,金属的电阻热可以忽略不计.该超材料吸波体可能在要求双面吸波的领域中具有潜在的应用. 关键词： 极化不敏感 双面吸波 手性结构 超材料吸波体     

Bridging the terahertz near-field and far-field observations of liquid crystal based metamaterial absorbers

Metamaterial-based absorbers play a significant role in applications ranging from energy harvesting and thermal emitters to sensors and imaging devices.The middle dielectric layer of conventional metamaterial absorbers has always been solid.Researchers could not detect the near field distribution in this layer or utilize it effectively.Here,we use anisotropic liquid crystal as the dielectric layer to realize electrically fast tunable terahertz metamaterial absorbers.We demonstrate strong,position-dependent terahertz near-field enhancement with sub-wavelength resolution inside the metamaterial absorber.We measure the terahertz far-field absorption as the driving voltage increases.By combining experimental results with liquid crystal simulations,we verify the near-field distribution in the middle layer indirectly and bridge the nearfield and far-field observations.Our work opens new opportunities for creating high-performance,fast,tunable,terahertz metamaterial devices that can be applied in biological imaging and sensing.     

A wideband metamaterial absorber based on a magnetic resonator loaded with lumped resistors

<正>A wideband metamaterial absorber（MA） based on a magnetic resonator loaded with lumped resistors is presented. It is composed of a one-dimensional periodic array of double U-shaped structured magnetic resonators loaded with lumped resistors,a dielectric substrate,and a metal plate.We simulated,fabricated,measured,and analyzed the MA. The experimental results show that the reflectance(S₁₁) is below -10 dB at normal incidence in the frequency range of 7.7 GHz-18 GHz,and the peak value is about—20 dB.Simulated power loss density distributions indicate that wideband absorption of the MA is mainly attributable to the lumped resistors in the magnetic resonator.Further investigations indicate that the distance between two unit cells along the magnetic field direction significantly influences the performance of the MA.     

极化无关双向吸收超材料吸波体的仿真与实验验证

设计并制作出极化无关双向吸收超材料吸波体.仿真结果表明,该吸波体对斜入射横电极化和横磁极化电磁波具有较好的吸收效果,其强损耗主要来自介质基板的介电损耗.实验测试结果表明,该吸波体在11.1 GHz对垂直入射电磁波实现双向强吸收,吸收率分别为95.9％和90.8％.该吸波体厚度较薄,工作波长约为1/34.该超材料吸波体具有吸收率高、厚度薄、设计简单、易于加工等优点.