This report demonstrates the electroless deposition of Ni onto micropatterns of poly (acrylic acid) (PAA) photografted to phthalimide‐terminated self‐assembled monolayers (SAMs). PAA is spin‐coated onto phthalimide SAMs and covered with a photomask. UV irradiation selectively binds PAA to exposed regions of the surface, allowing PAA on unexposed regions to be rinsed off. A Pd catalyst is then selectively adsorbed to regions of the surface where PAA is bound. The adsorbed catalyst selectively initiates Ni plating upon immersion of the substrate into a Ni(SO4) bath.
Diselenide‐containing polymers are facilely synthesized from polymers prepared by atom transfer radical polymerization (ATRP). Benefiting from the ATRP technology, this protocol provides a flexible route for controlling the polymer structure, which allows for a great variety of architectures of selenium‐containing polymer materials for applications in various fields. The oxidative and reductive responsive behavior of the obtained diselenide‐containing polymers is also investigated.
A strategy of thermo‐regulated phase‐separable catalysis (TPSC) is applied to the Cu(II)‐mediated atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in a p‐xylene/PEG‐200 biphasic system. Initiators for continuous activator regeneration ATRP (ICAR ATRP) are used to establish the TPSC‐based ICAR ATRP system using water‐soluble TPMA as a ligand, EBPA as an initiator, CuBr2 as a catalyst, and AIBN as a reducing agent. By heating to 70 °C, unlimited miscibility of both solvents is achieved and the polymerization can be carried out under homogeneous conditions; then on cooling to 25 °C, the mixture separates into two phases again. As a result, the catalyst complex remains in the PEG‐200 phase while the obtained polymers stay in the p‐xylene phase. The catalyst can therefore be removed from the resultant polymers by easily separating the two different layers and can be reused again. It is important that well‐defined PMMA with a controlled molecular weight and narrow molecular weight distribution could be obtained using this TPSC‐based ICAR ATRP system.
An ultraviolet (UV)‐cleavable bottlebrush polymer is synthesized using the “grafting‐onto” strategy by combining living radical polymerization and copper‐catalyzed azide‐alkyne cycloaddition (CuAAC). In this approach, reversible addition‐fragmentation chain transfer polymerization is used to prepare a poly(methylacrylate) backbone with azide side groups, while atom transfer radical polymerization is employed to prepare polystyrene (PS) side chains end‐functionalized with o‐nitrobenzyl (UV‐cleavable) propargyl groups. CuAAC is then used to graft PS side chains onto the polymer backbone, producing the corresponding bottlebrush polymers with UV‐cleavable PS side chains. The formation of the bottlebrush polymer is characterized by 1H nuclear magnetic resonance spectroscopy, gel permeation chromatography (GPC), and Fourier transform infrared spectroscopy. The cleavage behavior of the bottlebrush polymer is monitored in tetrahydrofuran solution under UV irradiation by GPC and viscosity measurements.
An alkyne‐functionalized ruthenium(II) bis‐terpyridine complex is directly copolymerized with phenylacetylene by alkyne polymerization. The polymer is characterized by size‐exclusion chromatography (SEC), 1H NMR spectroscopy, cyclic voltammetry (CV) measurements, and thermal analysis. The photophysical properties of the polymer are studied by UV–vis absorption spectroscopy. In addition, spectro‐electrochemical measurements are carried out. Time‐resolved luminescence lifetime decay curves show an enhanced lifetime of the metal complex attached to the conjugated polymer backbone compared with the Ru(tpy)22+ model complex.
In this paper, an oxygen‐insensitive degradable resist for UV‐nanoimprint is designed, comprising a polycyclic degradable acrylate monomer, 2,10‐diacryloyloxymethyl‐1,4,9,12‐tetraoxaspiro [4.2.4.2] tetradecane (DAMTT), and a multifunctional thiol monomer pentaerythritol tetra(3‐mercaptopropionate) (PETMP). The resist can be quickly UV‐cured in the air atmosphere and achieve a high monomer conversion of over 98%, which greatly reduce the adhesion force between the resist and the soft mold. High conversion, in company with an adequate Young's modulus (about 1 GPa) and an extremely low shrinkage (1.34%), promises high nanoimprint resolution of sub‐50 nm. The cross‐linked resist is able to break into linear molecules in a hot acid solvent. As a result, metallic patterns are fabricated on highly curved surfaces via the lift off process without the assistance of a thermoplastic polymer layer.
In the last decades, metallopolymers have received great attention due to their various applications in the fields of materials and chemistry. In this article, a neutral 18‐electron exo‐substituted η4‐cyclopentadiene CpCo(I) unit‐containing polymer is prepared in a controlled/“living” fashion by combining facile click chemistry and ring‐opening metathesis polymerization (ROMP). This Co(I)‐containing polymer is further used as a heterogeneous macromolecular catalyst for atom transfer radical polymerization (ATRP) of methyl methacrylate and styrene.
A novel co‐assembly based on the block copolymer bearing photocleavable groups and macroanionic polyoxometalates Na9[Ln(W5O18)2] (LnW10, Ln = Eu, Dy) triggered by UV light is realized in aqueous solution. The copolymer synthesized by atom transfer radical polymerization (ATRP) undergoes irreversible cleavage upon UV irradiation to generate primary amine (pKa ≈ 8–9) residues which are completely protonated under a neutral pH in aqueous solution. Electrostatic attractions between the resulting positively charged copolymers and anionic LnW10 drive the formation of assemblies. In situ small angle X‐ray scattering and transmission electron microscopy are used to characterize the morphology of the assemblies. The microenvironments around polyoxometalates in the core of hybrid assemblies become highly hydrophobic, resulting in dramatically enhanced photoluminescence with the obvious intensity enhancement. The solution parameters pH and salt additives show great effects on the formation of assemblies.
The synthesis of two 4,7,12,15‐tetrakisalkoxy‐substituted [2.2.2]‐paracyclophane‐1,9,17‐trienes and their polymerization employing ring opening metathesis polymerization (ROMP) using Ru‐carbenes (third‐generation Grubbs catalyst) is reported. Phenylene ethynylene trimers are reduced via a Grignard reagent, followed by an intramolecular McMurry cyclization to give the cyclophenes. The cyclophenes are polymerized into soluble poly(para‐phenylene vinylene)s (PPV), which are analyzed in solution by NMR, UV–vis, and fluorescence spectroscopy. They are spin coated into amorphous, fluorescent thin films, and investigated by optical spectroscopy and cyclic voltammetry.
In this research, the synthesis of boron‐ketoiminate‐containing polymers is reported with large molecular weights ( = 20 000) and their optical properties are examined by UV–vis absorption and photoluminescence spectrometries. It is shown that the polymers exhibit strong emission both in the solution and solid states (ΦPL,THF = 0.46–0.80, ΦPL,film = 0.13–0.38). These optical properties can be explained by a donor–acceptor interaction between the boron ketoiminate and the electron‐donating comonomer such as fluorene or bithiophene. Furthermore, in the solid states, their emission colors can be successfully tuned from blue to orange by the substituents on the nitrogen atom with the difference of the steric hindrance (λPL,THF = 464–546 nm, λPL,film = 486–604 nm).
A novel photo‐induced homogeneous atom transfer radical polymerization (ATRP) system is constructed using an organic copper salt (Cu(SC(S)N(C2H5)2)2) as a photo‐induced catalyst at 30 °C. Herein, N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine (PMDETA) is used as a ligand, ethyl 2‐bromophenylacetate (EBPA) as an ATRP initiator, and (2,4,6‐trimethylbenzoyl) diphenylphosphine oxide (TPO) as a photo‐induced radical initiator to establish an ICAR (initiators for continuous activator regeneration) ATRP using methyl methacrylate (MMA) as a modal monomer. The effect of the concentration of the organic copper on the polymerization is investigated in detail. It is found that well‐controlled polymerization can be obtained even with the amount of (Cu(SC(S)N(C2H5)2)2 decreasing to a 1.56 ppm level, with the molecular weight of the resultant polymers increasing linearly with monomer conversion while maintaining a narrow molecular weight distribution (/ < 1.3).
A simple polymerization of trichlorophosphoranimine (Cl3P = N−SiMe3) mediated by functionalized triphenylphosphines is presented. In situ initiator formation and the subsequent polymerization progress are investigated by 31P NMR spectroscopy, demonstrating a living cationic polymerization mechanism. The polymer chain lengths and molecular weights of the resulting substituted poly(organo)phosphazenes are further studied by 1H NMR spectroscopy and size exclusion chromatography. This strategy facilitates the preparation of polyphosphazenes with controlled molecular weights and specific functional groups at the α‐chain end. Such well‐defined, mono‐end‐functionalized polymers have great potential use in bioconjugation, surface modification, and as building blocks for complex macromolecular constructs.
Development of self‐healing polymers with spontaneous self‐healing capability and good mechanical performance is highly desired and remains a great challenge. Here, mechanical robust and self‐healable supramolecular hydrogels have been fabricated by using poly(2‐dimethylaminoethyl methacrylate) brushes modified silica nanoparticles (SiO2@PDMAEMA) as multifunctional macrocrosslinkers in a poly(acrylic acid) (PAA) network structure. The SiO2 nanoparticles serve as noncovalent crosslinkers, dissipating energy, whereas the electrostatic interactions between cationic PDMAEMA and anionic PAA render the hydrogel self‐healing property. This process provides a simple and broadly applicable strategy to produce mechanical strong and self‐healable materials.
A facile and versatile approach to constructing colorless surface coatings based on green tea polyphenols is reported, which can further act as a photoinitiating layer to initiate radical polymerization. These colorless green tea polyphenol coatings are capable of successfully photografting polymer brushes, and the resulting polymer brush patterns show spatial shape adjustability by masked UV irradiation. Both surface modifications and photografted polymer brushes do not alter the original color of the substrates. This method could be promising for the development of surface modifications.
Orthogonal self‐assembly of multiple components represents an efficient strategy to afford hierarchical and multifunctional assemblies. Here, we demonstrate the orthogonal recognition behaviors between benzo‐21‐crown‐7/secondary ammonium salt and terpyridine/metal ions (Fe2+ or Zn2+) recognition motifs. Main‐chain supramolecular polymers are subsequently achieved via “one‐pot” mixing of the three monomers together (heteroditopic monomer 1 , homoditopic secondary ammonium salt monomer 2, and Fe(BF4)2•6H2O or Zn(OTf)2), which are confirmed by 1H NMR, UV–Vis, DOSY, and viscosity measurements. Moreover, different metal ions (Fe2+ or Zn2+) exert considerable effects on the size of the resulting supramolecular polymers. Integration of two different types of non‐covalent interactions renders dynamic and responsive properties for the resulting supramolecular polymers, as triggered by a variety of external stimuli such as temperature, potassium cation, as well as stronger chelating ligands. Therefore, the current work is a prerequisite for the future application of such orthogonal assemblies as intelligent supramolecular materials.
High‐molecular‐weight conjugated polymer HD‐PDFC‐DTBT with N‐(2‐hexyldecyl)‐3,6‐difluorocarbazole as the donor unit, 5,6‐bis(octyloxy)benzothiadiazole as the acceptor unit, and thiophene as the spacer is synthesized by Suzuki polycondensation. HD‐PDFC‐DTBT shows a large bandgap of 1.96 eV and a high hole mobility of 0.16 cm2 V−1 s−1. HD‐PDFC‐DTBT:PC71BM‐based inverted polymer solar cells (PSCs) give a power conversion efficiency (PCE) of 7.39% with a Voc of 0.93 V, a Jsc of 14.11 mA cm−2, and an FF of 0.56.
The photochemical and electrochemical investigations of commercially available, safe, and cheap fluorescent brighteners, namely, triazinylstilbene (commercial name: fluorescent brightener 28) and 2,5‐bis(5‐tert‐butyl‐benzoxazol‐2‐yl)thiophene, as well as their original use as photoinitiators of polymerization upon light emitting diode (LED) irradiation are reported. Remarkably, their excellent near‐UV–visible absorption properties combined with outstanding fluorescent properties allow them to act as high‐performance photoinitiators when used in combination with diaryliodonium salt. These two‐component photoinitiating systems can be employed for free radical polymerizations of acrylate. In addition, this brightener‐initiated photopolymerization is able to overcome oxygen inhibition even upon irradiation with low LED light intensity. The underlying photochemical mechanisms are investigated by electron‐spin resonance‐spin trapping, fluorescence, cyclic voltammetry, and steady‐state photolysis techniques.
The direct synthesis of structurally well‐defined protic polymeric ionic liquid (PIL) with controlled molecular weight and molecular weight distribution is examined using N,N‐diethyl‐N‐(2‐methacryloylethyl) ammonium bis(tri‐fluoromethylsulfonyl)imide (DEMH‐TFSI) as a monomer. Three polymerization methods, namely, atom transfer radical polymerization (ATRP), activators regenerated by electron transfer (ARGET)‐ATRP, and organotellurium‐mediated living radical polymerization (TERP) are employed in this study. While the polymerization by ATRP is slow and does not reach high monomer conversion that under ARGET‐ATRP and TERP proceeds smoothly and affords structurally well‐defined poly(DEMH‐TFSI)s. TERP is especially efficient for the control and poly(DEMH‐TFSI)s with low to high molecular weights ( = 49 100–392 500) and narrow molecular weight distributions (/ = 1.17–1.46) are obtained. These results represent the first example of synthesis of a structurally well‐defined protic, ammonium PIL by direct polymerization of the protic ionic liquid monomer. The polymerization of N,N‐diethyl‐N‐(2‐methacryloylethyl)‐N‐methylammonium bis(trifluoromethylsulfonyl)imide (DEMM‐TFSI), which possesses a quaternary ammonium salt, also proceeds in a highly controlled manner under TERP conditions. A diblock copolymer, polystyrene‐block‐poly(DEMH‐TFSI), is also successfully synthesized by TERP.
This work describes the synthesis of π‐conjugated polymers possessing arylene and 1,3‐butadiene alternating units in the main chain by the reaction of α,β‐unsaturated ester/nitrile containing γ‐H with aromatic/heteroaromatic aldehyde compound. By using 4‐(4‐formylphenyl)‐2‐butylene acid ethyl ester as a model monomer, the different polymerization conditions, including catalyst, catalyst amount, and solvent, are optimized. The polymerization of 4‐(4‐formylphenyl)‐2‐butylene acid ethyl ester is carried out by refluxing in ethanol for 72 h with 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) as a catalyst to give a 1,3‐butadiene‐containing π‐conjugated polymer, poly(phenylene‐1,3‐butadiene), in 84.3% yield with and / (PDI) estimated as 6172 and 1.65, respectively. Based on this new methodology, a series of π‐conjugated polymers containing 1,3‐butadiene units with different substituents are obtained in high yields. A possible mechanism is proposed for the polymerization through a six‐membered ring transition state and then a 1,5‐H shift intermediate.
The polymerisation of N‐acryloylmorpholine in water is reported utilising Cu(0)‐mediated living radical polymerisation (SET‐LRP). The inherent instability of [CuI(Me6‐Tren)Br] in aqueous solution is exploited via rapid disproportionation to prepare Cu(0) particles and [CuII(Me6‐Tren)Br2] in situ prior to addition of monomer and initiator. Quantitative conversion is attained within 30 min for various degrees of polymerisation (DPn = 20–640) with SEC showing symmetrical narrow molecular weight distributions (Đ < 1.18) in all cases. Optimised conditions are subsequently applied for the preparation of a diblock copolymer poly(NIPAm)‐b‐(N‐acryloylmorpholine), illustrating the versatility of this approach.
