The synthesis of a novel fused hexacyclic electron rich monomer incorporating thieno[3,2‐b]thiophene is reported and characterized by single crystal X‐ray diffraction. Suzuki co‐polymerization with benzothiadiazole (BT) afforded a novel low band‐gap polymer P4TBT with high molecular weights and good solution processability. Bulk heterojunction solar cell devices using the P4TBT and [70]PCBM gave power conversion efficiencies of 2.5%. Top‐gate, bottom‐contact field effect transistors (FETs) using P4TBT displayed high hole mobilities of 0.07 cm2 · Vs−1 demonstrating the suitability of the novel monomer and polymer for use in high performing organic electronic devices.
Two polythiophene derivatives with electron‐donating alkylthio side chains, poly[(3‐hexylthio)thiophene] (P3HST) and poly[(3‐hexylthio)thiophene‐alt‐thiophene] (P3HST‐co‐Th) have been synthesized and characterized. Both P3HST and P3HST‐co‐Th show broader absorption peaks than poly(3‐hexylthiophene). Meanwhile, the alkylthio side chains decrease the HOMO energy level of the polymers, which benefits the higher open circuit voltage of the polymer solar cells (PSCs) based on the polymer as donor. PSCs have been fabricated with the polymers as donor and [6,6]‐phenyl C61 butyric acid methyl ester as acceptor (1: 1, w/w). The devices based on P3HST and P3HST‐co‐Th show an open circuit voltage of 0.63 V, and a power conversion efficiency of 0.34% and 0.5%, respectively, under the illumination of AM1.5, 80 mW · cm−2.
A series of donor‐acceptor alternated conjugated copolymers, composed of thiophene, bithiophene, thieno[3,2‐b]thiophene, and 2,1,3‐benzothiadiazole units and differing from each other by the nature and the number of 3‐alkylthiophene in the backbone, have been synthesized by Stille cross‐coupling polymerization. The material's optical and electrochemical properties, in solution and in thin films, have been investigated using UV‐Visible absorption and cyclic voltammetry. Bulk heterojunction solar cells using blends of the newly synthesized copolymers, as electron donor, and C60‐PCBM or C70‐PCBM, as electron transporting material, have been elaborated. A maximum power conversion efficiency of 1.8% is achieved with a 1:4 PPBzT2‐C12:C70‐PCBM weight ratio.
Summary: We describe an interesting approach to the fabrication of wettability gradients from hydrophobicity to superhydrophobicity in low‐density polyethylene (LDPE) films by first forming high porosity surfaces and placing the specimens onto linear temperature gradients. While the polymer chosen for the study is non‐polar, its microporous layer provides sufficient superhydrophobicity. Lateral gradient heating of the layer results in partial melting of the polymer and correspondingly decreases porosity thus decreasing hydrophobicity.
In this work, we report the design of a new multi‐functional, water‐soluble conjugated polymer integrating both a DNA intercalator and a redox label. Based on this multi‐functional conjugated polymer, we develop a sequence‐specific electrochemical DNA sensor, where the acridine unit serves as the basis for sequence discrimination, and the ferrocene label provides the electrochemical signal. Moreover, the conjugated polythiophene helps transfer electrons from ferrocene to the electrode. This sensor provides a new way for rapid and convenient detection of DNA targets.
Commercially available 1,2‐PB was transformed into a well‐defined reactive intermediate by quantitative bromination. The brominated polymer was used as a polyfunctional macroinitiator for the cationic ring‐opening polymerization of 2‐ethyl‐2‐oxazoline to yield a water‐soluble brush polymer. Nucleophilic substitution of bromide by 1‐methyl imidazole resulted in the formation of polyelectrolyte copolymers consisting of mixed units of imidazolium, bromo, and double bond. These copolymers, which were soluble in water without forming aggregates, were used as stabilizers in the heterophase polymerization of styrene and were also studied for their ionic conducting properties.
A two‐armed polymer with a crown ether core self‐assembles to produce macroporous films with pores perpendicularly reaching through the film down to the substrate. A possible assembling mechanism is discussed. The pore size can be conveniently adjusted by changing the solution concentration. These through‐hole macroporous films provide a template for fabricating an array of Cu nanoparticle aggregates.
A direct access to photochromic polymeric vesicles was demonstrated via polymerization‐induced self‐assembly and reorganization (PISR). The resulting vesicles displayed interesting photochromic behaviors different from that of their free polymer chains in DMF, and the vesicles exhibited stronger fluorescence and excellent photostability due to confinement of conformational flexibility of the polymer chains in aggregates.
Summary: The fabrication of polymer diodes on a glass substrate by an ink‐jet printing technique is reported. Both an n‐type semiconductive polymer, poly[2‐methoxy‐5‐(2‐ethylhexyloxy)‐1,4‐(1‐cyanovinylene)phenylene] (CN‐PPV), and a p‐type semiconductive polymer, polypyrrole (PPy) or poly(3,4‐ethylenedioxythiophene) (PEDOT), were printed through a piezoelectric ink‐jet printer. The printed CN‐PPV/PPy and CN‐PPV/PEDOT diodes showed good rectifying characteristics. These results indicate the potential of the low‐cost ink‐jet printing technique to produce polymer microelectronic devices and circuits.
Schematic diagram of the printed polymer diode 相似文献
A novel pH‐responsive polymer vesicle obtained by the aqueous self‐assembly of carboxy‐terminated hyperbranched polyesters is reported. The synthesis is very simple, just a one‐step esterification of the commercially available hydroxy‐terminated hyperbranched polyester of Boltorn Hx (x = 20, 30, 40) with succinic anhydride. The vesicle size can be controlled from 200 nm to 10 µm by simply adjusting the solution pH as well as the degrees of branching (or generation).
The one‐pot synthesis of 4‐alkoxy‐5,6‐dihydro‐furo(and ‐thieno)[2,3‐d]pyrimidines is described. The reactions of 2‐benzamido‐4,5‐dihydro‐3‐furan(and ‐3‐thiophene)carbonitriles 1a‐d and 2a‐c with ethanol and/or methanol in the presence of zinc chloride and triethylamine gave the corresponding 4‐alkoxy‐5,6‐dihydro‐furo(and ‐thieno)[2,3‐d]pyrimidines 3a‐d , 4a‐d , 5a‐c and 6a‐c . 相似文献
Reactions between the ethylene groups in the backbone of conjugated polymers under UV illumination and heat treatment result in the cross‐linking of the main polymer chains. The cross‐linking leads to two simultaneous results in the polymer: excellent solvent resistance and increased bandgap. Using this reaction, three‐color polymer light‐emitting diodes (PLEDs) with a multi‐layer structure can be easily realized by a dry photo‐pattern in an active‐gas‐free environment. Multi‐layer blue devices with dramatically enhanced efficiency can also be achieved conveniently.
Au nanoparticles (NPs) and polymer composite particles with phase‐separation structures were prepared based on phase separation structures. Au NPs were successfully synthesized in amphiphilic block‐copolymer micelles, and then composite particles were formed by a simple solvent evaporation process from Au NPs and polymer solution. The phase separated structures (Janus and Core‐shell) were controlled by changing the combination of polymers having differing hydrophobicity.
Summary: Fluorescent images that illustrate acid‐catalyzed tert‐butoxycarbonyl (tBoc) deprotection patterns in polymer films were obtained using fluorescent sensors based on 7‐hydroxycoumarin dyes. Three commercial 7‐hydroxycoumarins, which are highly fluorescent, become practically nonemissive upon protection of the 7‐hydroxyl position with tBoc. In thin polymer films, the protected “prefluorescent” probes can return to their deprotected, fluorescent states by reaction with catalytic amounts of photogenerated acid and mild heating.
Protected probes become highly fluorescent after acid‐induced deprotection. 相似文献
The synthesis, layer‐by‐layer deposition, and electro‐copolymerization of precursor polyelectrolyte multilayer ultrathin films with thiophene and carbazole electroactive groups are described. The interest is in observing an electrochemical cross‐linking approach towards a highly ordered ultrathin film that contains two types of monomers to result in possible layer‐limited homo‐ and copolymerization. A uniform linear growth with alternate deposition of the polyelectrolytes is observed. The multilayer films were then electrochemically polymerized anodically by cyclic voltammetry (CV), which results in copolymerization between two different electroactive groups. Cross‐linking of the layers was verified by CV and spectroelectrochemistry data with very good linear electro‐copolymerizability.
A dextran‐based dual‐sensitive polymer is employed to endow gold nanoparticles with stability and pH‐ and temperature‐sensitivity. The dual‐sensitive polymer is prepared by RAFT polymerization of N‐isopropylacrylamide from trithiocarbonate groups linked to dextran and succinoylation of dextran after polymerization. The functionalized nanoparticles show excellent stability under various conditions and can be stored in powder‐form. UV and DLS measurements confirm that the temperature‐induced optical changes and aggregation behaviors of the particles are strongly dependent on pH.
Low‐cost, responsive poly(N‐isopropylacrylamide)/polystyrene composite films were prepared by a facile electrospinning technique. The surface structures and wettabilities of the composite films are tunable by simply controlling the concentration of polymer. With a proper proportion of each polymer, the wettability of the surface can be switched between superhydrophilicity and superhydrophobicity when the temperature is changed from 20 °C to 50 °C. The combination of a stimuli‐responsive polymer with micro/nanostructures on the surface of the composite film contributes to this unique surface property.
A mathematical model describing interfacial radical polymerization‐based film formation on hydrogels is elucidated. A glucose oxidase‐mediated multistage initiation reaction is used to accomplish interfacial film formation. A polymer concentration‐dependent diffusion coefficient is used to reflect the changing mass transport conditions as the film develops. Model predictions of the film thickness as a function of the species concentrations agree well with experiments. The model predicts that the degree of initiation reaction delocalization with the enzyme‐mediated initiation system is significantly higher than an enzyme‐independent system, thus affecting the film growth rate and structure. The mass transport properties of the film and its adhesion to the underlying substrate are also investigated.
