Preparation and characterization of polypyrrole/magnetite nanocomposites synthesized by in situ chemical oxidative polymerization

This work describes the preparation and characterization of polypyrrole (PPy)/iron oxide nanocomposites fabricated from monodispersed iron oxide nanoparticles in the crystalline form of magnetite (Fe₃O₄) and PPy by in situ chemical oxidative polymerization. Two spherical nanoparticles of magnetite, such as 4 and 8 nm, served as cores were first dispersed in an aqueous solution with anionic surfactant sodium bis(2‐ethylhexyl) sulfosuccinate to form micelle/magnetite spherical templates that avoid the aggregation of magnetite nanoparticles during the further preparation of nanocomposites. The PPy/magnetite nanocomposites were then synthesized on the surface of the spherical templates. Structural and morphological analysis showed that the fabricated PPy/magnetite nanocomposites are core (magnetite)‐shell (PPy) structures. Morphology of the PPy/magnetite nanocomposites containing monodispersed 4‐nm magnetite nanoparticles shows a remarkable change from spherical to tube‐like structures as the content of nanoparticles increases from 12 to 24 wt %. Conductivities of these PPy/magnetite nanocomposites show significant enhancements when compared with those of PPy without magnetite nanoparticles, in particular the conductivities of 36 wt % PPy/magnetite nanocomposites with 4‐nm magnetite nanoparticles are about six times in magnitude higher than those of PPy without magnetite nanocomposites. These results suggest that the tube‐like structures of 36 wt % PPy/magnetite nanocomposites may be served as conducting network to enhance the conductivity of nanocomposites. The magnetic properties of 24 and 36 wt % PPy/magnetitenanocomposites show ferromagnetic behavior and supermagnetism, respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1291–1300, 2008     

Organic–inorganic polypyrrole‐surface modified SiO2 hybrid nanocomposites: a facile and green synthetic approach

Organic–inorganic hybrid nanocomposites composed of conductive polypyrrole (PPy) and surface modified silica (SiO₂) were successfully prepared through an in situ chemical oxidative polymerization in supercritical carbon dioxide (scCO₂). SiO₂ nanoparticles were surface modified using 3‐methacryloxypropyltrimethoxysilane (MPTMS) in order to disperse well in the medium. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) showed that the SiO₂ nanoparticles were encapsulated into the polymer. UV‐visible spectra of the diluted colloidal dispersions of PPy/SiO₂ hybrid nanocomposites were similar to those of PPy system. Fourier transform infrared spectroscopy (FT‐IR) suggested the strong interaction between PPy and SiO₂. Surface characterizations of nanocomposites were described by X‐ray photoelectron spectroscopy (XPS). The nanocomposites synthesized in scCO₂ have been shown to possess higher electrical conductivity and thermal stability. Copyright © 2009 John Wiley & Sons, Ltd.     

Conversion of CuO Nanoplates into Porous Hybrid Cu2O/Polypyrrole Nanoflakes through a Pyrrole‐Induced Reductive Transformation Reaction

Porous hybrid Cu₂O/polypyrrole nanoflakes have been synthesized from solid CuO nanoplate templates through the pyrrole‐induced reductive transformation reaction at elevated temperature. The conversion mechanism involves the reductive transformation of CuO to Cu₂O and the in situ oxidative polymerization of pyrrole to polypyrrole. In addition, the morphology of the as‐converted nanohybrids depends on the shape of the CuO precursors. The strategy enables us to transform single‐crystalline CuO nanosheets into hollow hybrid Cu₂O/polypyrrole nanoframes. The ability to transform CuO and an organic monomer into porous hybrid materials of conducting polymer and Cu₂O with macrosized morphological retention opens up interesting possibilities to create novel nanostructures. Electrochemical examinations show that these porous hybrid Cu₂O/polypyrrole nanostructures exhibit efficient catalytic activity towards oxygen reduction reaction (ORR), excellent methanol tolerance ability, and catalytic stability in alkaline solution, thus making them promising nonprecious‐metal‐based catalysts for ORR in alkaline fuel cells and metal–air batteries.     

聚吡咯/硫化镉核壳纳米线的制备及整流特性

以无机多孔氧化铝膜为模板,利用气相沉积和原位电化学沉积方法成功地制备了有机-无机杂化聚吡咯/硫化镉核壳纳米线;采用扫描电子显微镜和透射电子显微镜分析了聚吡咯/硫化镉核壳纳米线的表面形貌和微结构.结果表明,内部的聚吡咯纳米线紧紧依附在外部的硫化镉纳米管中,并且硫化镉纳米管被聚吡咯全部填充.与此同时,在聚吡咯/硫化镉核壳纳米线中,外部硫化镉壳与内部聚吡咯核之间存在电荷转移;聚吡咯和硫化镉之间形成有机-无机杂化的P-N界面,从而导致单根聚吡咯/硫化镉核壳纳米线显示出不同于外部壳和内部核的整流特性.     

Silica–Polypyrrole Hybrids as High‐Performance Metal‐Free Electrocatalysts for the Hydrogen Evolution Reaction in Neutral Media

Constructing inorganic–organic hybrids with superior properties in terms of water adsorption and activation will lead to catalysts with significantly enhanced electrocatalytic activity in the hydrogen evolution reaction (HER) in environmentally benign neutral media. Herein, we report SiO₂–polypyrrole (PPy) hybrid nanotubes supported on carbon fibers (CFs) (SiO₂ /PPy NTs–CFs) as inexpensive and high‐performance electrocatalysts for the HER in neutral media. Because of the strong electronic interactions between SiO₂ and PPy, the SiO₂ uniquely serves as the centers for water adsorption and activation, and accordingly promotes the HER. The metal‐free SiO₂ /PPy NTs–CFs displayed high catalytic activity in the HER in neutral media, such as a low onset potential and small Tafel slope, as well as excellent long‐term durability.     

Solution route to inorganic nanobelt‐conducting organic polymer core‐shell nanocomposites

A facile and versatile solution‐based approach was developed to prepare semiconductor metal oxide nanobelt‐conducting organic polymer core‐shell nanocomposites. Well‐defined nanobelts of several types of oxide nanobelts were combined with conducting polymer [polypyrrole (PPy) and polyaniline (PANi)] via in situ polymerization in aqueous solution to obtain a new type of inorganic–organic composite nanostructure. Samples were characterized by using X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared, electron energy loss spectra, high‐resolution transmission electron microscopy, and ultraviolet–visible techniques. Electron energy loss spectra revealed the existence of C?C and C? N bonds in coating layers to prove the encapsulation of PPy or PANi. The red‐shift of absorption band at high‐energy was observed for PPy‐encapsulated composites via ultraviolet–visible spectroscopy, and significant absorption band shifts were also encountered to PANi‐encapsulated composites, which suggest possibilities of band‐gap tuning of such metal oxide‐conducting polymer composites to be applied especially in solar cell devices. However, the sacrifice of nanobelts‐core led to hollow structures of PPy and PANi, which expands the synthetic strategies to prepare conducting polymer nanotubes. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2892–2900, 2005     

Facile and scalable fabrication of graphene/polypyrrole/MnO<Subscript>x</Subscript>/Cu(OH)<Subscript>2</Subscript> composite for high-performance supercapacitors

In this study, to improve the specific capacitance of graphene-based supercapacitor, novel quadri composite of G/PPy/MnO_x/Cu(OH)₂ was synthesized by using a facile and inexpensive route. First, a two-step method consisting of thermal decomposition and in situ oxidative polymerization was employed to fabricate graphene/polypyrrole/manganese oxide composites. Second, Cu(OH)₂ nanowires were deposited on Cu foil. Afterwards, for the electrochemical measurements, composite powders were deposited on Cu(OH)₂/Cu foil substrate as working electrodes. The synthesized samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), Fourier transform infrared (FT-IR) spectroscopy, and Raman spectroscopy. The XRD analysis revealed the formation of PPy/graphene, Mn₃O₄/graphene, and graphene/polypyrrole/MnO_x. In addition, the presence of polypyrrole and manganese oxides was confirmed using FT-IR and Raman spectroscopies. Graphene/polypyrrole/MnO_x/Cu(OH)₂ electrode showed the best electrochemical performance and exhibited the largest specific capacitance of approximately 370 F/g at the scan rate of 10 mV/s in 6 M KOH electrolyte. In addition, other electrochemical measurements (charge–discharge, EIS and cyclical performance) of the G/Cu(OH)₂, G/PPy/Cu(OH)₂, G/Mn₃O₄/Cu(OH)₂, and G/PPy/MnO_x/Cu(OH)₂ electrodes suggested that the G/PPy/MnO_x/Cu(OH)₂ composite electrode is promising materials for supercapacitor application.     

Magnetic ionic liquid‐assisted synthesis of polypyrrole/AgCl nanocomposites

The synthesis of polypyrrole (PPy)/AgCl nanocomposites with their size ranging around 70–100 nm are achieved by using magnetic ionic liquid as the oxidant in the interface polymerization system. The interface polymerization leads to the formation of uniform and unaggregated nanocomposites with a relatively narrow size distribution confined to submicrometer‐sized domains. The morphology and structure of the nanocomposites are characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, and X‐ray diffraction (XRD). The potential application of PPy/AgCl nanocomposites as a H₂O₂ biosensor is also reported. Copyright © 2010 John Wiley & Sons, Ltd. Erratum: Magnetic ionic liquid‐assisted synthesis of polypyrrole/AgCl nanocomposites     

Decorating Polypyrrole Nanotubes with Au Nanoparticles by an In Situ Reduction Process

Au nanoparticle‐decorated polypyrrole nanotubes (defined as PPy/Au nanocomposites) are prepared by an in situ reduction process. Polypyrrole (PPy) nanotubes are prepared by a self‐degraded template method, and Au nanoparticles are deposited in situ by the reduction of HAuCl₄. The size and uniformity of the Au nanoparticles that decorate the PPy nanotubes can be controlled by adjusting the experimental conditions, such as the stabilizers used and the reaction temperature. The morphologies and optical properties of the nanocomposites have been characterized by scanning electron microscopy, transmission electron microscopy, UV‐vis, and FT‐IR spectroscopy. Conductivity measurements show that the conductivities of the nanocomposites decrease with a decrease of temperature, and the conductivity–temperature relationship obeys the quasi‐one dimensional variable range hopping model.

     

Conducting and magnetic behaviors of monodispersed iron oxide/polypyrrole nanocomposites synthesized by in situ chemical oxidative polymerization

This study describes the preparation of nanocomposites fabricated from monodispersed iron oxide (Fe₃O₄) and polypyrrole (PPy) by in situ chemical oxidative polymerization. The monodispersed 4 nm Fe₃O₄ nanoparticles which served as cores were synthesized using the thermal decomposition of a mixture of Iron (III) acetylacetonate and oleic acid in the presence of high boiling point solvents. The resulting nanoparticles were further dispersed in an aqueous solution with anionic surfactant sodium bis(2‐ethylhexyl) sulfosuccinate to form micelle/Fe₃O₄ spherical templates that avoid the aggregation of Fe₃O₄ nanoparticles during the further preparation of the nanocomposites. The Fe₃O₄/PPy nanocomposites were then synthesized via in situ chemical oxidative polymerization on the surface of the spherical templates. Both field‐emission scanning electron microscopy (FESEM) and high‐resolution transmission electron microscopy (HRTEM) images indicate that the resulting Fe₃O₄ nanoparticles are close to spherical dots with a particle size of about 4 nm and a standard deviation of less than 5% (4 ± 0.2 nm). Structural and morphological analysis using FESEM and HRTEM showed that the fabricated Fe₃O₄/PPy nanocomposites are core (Fe₃O₄)‐shell (PPy) structures. Morphology of the nanocomposites shows a remarkable change from spherical to tube‐like structures as the content of monodispersed Fe₃O₄ nanoparticles increases from 9% up to 24 wt %. The conductivities of these Fe₃O₄/PPy nanocomposites are about six times higher than those of PPy without Fe₃O₄. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4647–4655, 2007     

Microstructure control of MnO2/CNT hybrids under in-situ hydrothermal conditions

In this work, single-crystalline MnO₂ nanoparticles were directly grown on the surface of multi-walled carbon nanotubes (CNTs) homogeneously under in-situ hydrothermal conditions, during which the CNTs were well dispersed in aqueous solution with the aid of dodecyl benzene sulphonic acid sodium (SDBS). This stable suspension ensures the continuous deposition of the MnO₂ nanocrystals. It was found that the MnO₂/CNTs nanocomposites formed in the presence of CNTs, but the MnO₂ nanowires formed without CNTs under the same hydrothermal conditions. Moreover, the as-synthesized MnO₂/CNTs sample showed a high specific capacity and cycling stability, which was ascribed to its highly-homogeneous hybrid nanostructure. This homogeneous MnO₂/CNTs nanocomposite is shown to be able to take full advantages of both the high capacity of MnO₂ and the high electron conductivity of CNTs by integrating them homogeneously. This homogeneous hybrid nanostructure is a promising electrode material for energy storage/conversion devices with excellent performances.     

Synthesis and characterization of carbon nanotube/polypyrrole core–shell nanocomposites via in situ inverse microemulsion

We demonstrate here a feasible approach to the preparation of multiwalled carbon nanotube (MWNT)/polypyrrole (PPy) core–shell nanowires by in situ inverse microemulsion. Transmission electron microscopy and scanning electron microscopy showed that the carbon nanotubes were uniformly coated with a PPy layer with a thickness of several to several tens of nanometers, depending on the MWNT content. Fourier transform infrared spectra suggested that there was strong interaction between the π‐bonded surface of the carbon nanotubes and the conjugated structure of the PPy shell layer. The thermal stability and electrical conductivity of the MWNT/PPy composites were examined with thermogravimetric analysis and a conventional four‐probe method. In comparison with pure PPy, the decomposition temperature of the MWNT/PPy (1 wt % MWNT) composites increased from 305 to 335 °C, and the electrical conductivity of the MWNT/PPy (1 wt % MWNT) composites increased by 1 order of magnitude. The current–voltage curves of the MWNT/PPy nanocomposites followed Ohm's law, reflecting the metallic character of the MWNT/PPy nanocomposites. The cyclic voltammetry measurements revealed that PPy/MWNT composites showed an enhancement in the specific charge capacity with respect to that of pure PPy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6105–6115, 2005     

Electromagnetic interference shielding effectiveness and microwave absorption properties of thermoplastic polyurethane/montmorillonite‐polypyrrole nanocomposites

In this work, thermoplastic polyurethane‐filled montmorillonite‐polypyrrole (TPU/Mt‐PPy) was prepared through melt mixing process for using in electromagnetic shielding applications. The effect of conducting filler content and type, sample thickness, and X‐band frequency range on the electromagnetic interference shielding effectiveness (EMI SE) and EMI attenuation mechanism was investigated. A comparative study of electrical and microwave absorption properties of TPU/Mt‐PPy nanocomposites and TPU/PPy blends was also reported. The total EMI SE average and electrical conductivity of all Mt‐PPy.Cl or Mt‐PPy.DBSA nanocomposites are higher than those found for TPU/PPy.Cl and TPU/PPy.DBSA blends. This behavior was attributed to the higher aspect ratio and better dispersion of the nanostructured Mt‐PPy when compared with neat PPy. Moreover, the presence of Mt‐PPy into TPU matrix increases absorption loss (SE_A) mechanism, contributing to increase EMI SE. The total EMI SE values of nanocomposites containing 30 wt% of Mt‐PPy.DBSA with 2 and 5 mm thickness were approximately 16.6 and approximately 36.5 dB, respectively, corresponding to the total EMI of 98% (75% by absorption) and 99.9% (88% by absorption). These results highlight that the nanocomposites studied are promising materials for electromagnetic shielding applications.     

In Situ Growth of MnO2 Nanosheets on N‐Doped Carbon Nanotubes Derived from Polypyrrole Tubes for Supercapacitors

Nitrogen‐doped porous carbon nanotubes@MnO₂ (N‐CNTs@MnO₂) nanocomposites are prepared through the in situ growth of MnO₂ nanosheets on N‐CNTs derived from polypyrrole nanotubes (PNTs). Benefiting from the synergistic effects between N‐CNTs (high conductivity and N doping level) and MnO₂ nanosheets (high theoretical capacity), the as‐prepared N‐CNTs@MnO₂‐800 nanocomposites show a specific capacitance of 219 F g^?1 at a current density of 1.0 A g^?1, which is higher than that of pure MnO₂ nanosheets (128 F g^?1) and PNTs (42 F g^?1) in 0.5 m Na₂SO₄ solution. Meanwhile, the capacitance retention of 86.8 % (after 1000 cycles at 10 A g^?1) indicates an excellent electrochemical performance of N‐CNTs@MnO₂ prepared in this work.     

Synthesis and Properties of Polypyrrole/Chitosan Composite Hydrogels

Conducting polymer hydrogels consisting of polypyrrole (PPy) and chitosan (CS) are prepared by static polymerization of pyrrole using methyl orange (MO) as the dopant and Fe₂(SO₄)₃ as the oxidant in the CS aqueous solution. PPy/CS composite hydrogels not only have good electrical conductivities, but also exhibit excellent swelling/deswelling behaviors due to the participation of one-dimensional conducting PPy blocks in the hydrogel network. The effects of the amount of the oxidant and ionic strength on the physical properties of PPy/CS composite hydrogels are studied in detail. The results show that PPy/CS composite hydrogels have improved water absorbencies in saline solutions compared with the conventional polyelectrolyte hydrogel.     

Pt and Pt–Ru nanoparticles decorated polypyrrole/multiwalled carbon nanotubes and their catalytic activity towards methanol oxidation

Conducting polymer composite films comprised of polypyrrole (PPy) and multiwalled carbon nanotubes (MWCNTs) [PPy–CNT] were synthesized by in situ polymerization of pyrrole on carbon nanotubes in 0.1 M HCl containing (NH₄)S₂O₈ as oxidizing agent over a temperature range of 0–5 °C. Pt nanoparticles are deposited on PPy–CNT composite films by chemical reduction of H₂PtCl₆ using HCHO as reducing agent at pH = 11 [Pt/PPy–CNT]. The presence of MWCNTs leads to higher activity, which might be due to the increase of electrochemically accessible surface areas, electronic conductivity and easier charge-transfer at polymer/electrolyte interfaces allowing higher dispersion and utilization of the deposited Pt nanoparticles. A comparative investigation was carried out using Pt–Ru nanoparticles decorated PPy–CNT composites. Cyclic voltammetry demonstrated that the synthesized Pt–Ru/PPy–CNT catalysts exhibited higher catalytic activity for methanol oxidation than Pt/PPy–CNT catalyst. Such kinds of Pt and Pt–Ru particles deposited on PPy–CNT composite polymer films exhibit excellent catalytic activity and stability towards methanol oxidation, which indicates that the composite films is more promising support material for fuel cell applications.     

Synthesis and characterization of polypyrrole/graphite oxide composite by in situ emulsion polymerization

This work demonstrates a feasible route to synthesize the layered polypyrrole/graphite oxide (PPy/GO) composite by in situ emulsion polymerization in the presence of cationic surfactant cetyltrimethylammonium bromide (CTAB) as emulsifier. AFM and XRD results reveal that the GO can be delaminated into nanosheets and well dispersed in aqueous solution in the presence of CTAB. The PPy nanowires are formed due to the presence of the lamellar mesostructured (CTA)₂S₂O₈ as a template. The results of the PPy/GO composite indicate the PPy insert successfully into GO interlayers, and the nanofiber‐like PPy are deposited onto the GO surface. Owing to π–π electron stacking effect between the pyrrole ring of PPy and the unoxided domain of GO sheets, the electrical conductivity of PPy/GO composite (5 S/cm) significantly improves in comparison with pure PPy nanowires (0.94 S/cm) and pristine GO (1 × 10^?6 S/cm). © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1329–1335, 2010     

Facile one‐step synthesis of electromagnetic functionalized polypyrrole/Fe3O4 nanotubes via a self‐assembly process

This article reports a simple self‐assembly process for facile one‐step synthesis of novel electromagnetic functionalized polypyrrole (PPy)/Fe₃O₄ composite nanotubes using p‐toluenesulfonic acid (p‐TSA) as the dopant and FeCl₃ as the oxidant. The key trick of the present method is to use FeCl₃ as the oxidant for both PPy and Fe₃O₄ in the same time to synthesize PPy/Fe₃O₄ composite nanotubes in one‐step. This facile one‐step method is much simpler than the conventional approach using the Fe₃O₄ nanoparticles as the additives. Compared to the similar composites synthesized using the conventional method, the as‐prepared PPy‐p‐TSA/Fe₃O₄ composite nanotubes using the facile one‐step self‐assembly process show much higher room‐temperature conductivity. Moreover, the composite nanotubes display interesting ferromagnetic behavior. The electrical properties of the PPy‐p‐TSA/Fe₃O₄ composite nanotubes are dominated by the amount of FeCl₃ while their magnetic properties are controlled by the amount of FeCl₂. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 320–326, 2010     

Core–Shell LiFePO4/Carbon‐Coated Reduced Graphene Oxide Hybrids for High‐Power Lithium‐Ion Battery Cathodes

Core‐shell carbon‐coated LiFePO₄ nanoparticles were hybridized with reduced graphene (rGO) for high‐power lithium‐ion battery cathodes. Spontaneous aggregation of hydrophobic graphene in aqueous solutions during the formation of composite materials was precluded by employing hydrophilic graphene oxide (GO) as starting templates. The fabrication of true nanoscale carbon‐coated LiFePO₄‐rGO (LFP/C‐rGO) hybrids were ascribed to three factors: 1) In‐situ polymerization of polypyrrole for constrained nanoparticle synthesis of LiFePO₄, 2) enhanced dispersion of conducting 2D networks endowed by colloidal stability of GO, and 3) intimate contact between active materials and rGO. The importance of conducting template dispersion was demonstrated by contrasting LFP/C‐rGO hybrids with LFP/C‐rGO composites in which agglomerated rGO solution was used as the starting templates. The fabricated hybrid cathodes showed superior rate capability and cyclability with rates from 0.1 to 60 C. This study demonstrated the synergistic combination of nanosizing with efficient conducting templates to afford facile Li⁺ ion and electron transport for high power applications.     

Fabrication of Electrically Conducting Polypyrrole‐Poly(ethylene oxide) Composite Nanofibers

Summary: Electrically conducting polypyrrole‐poly(ethylene oxide) (PPy‐PEO) composite nanofibers are fabricated via a two‐step process. First, FeCl₃‐containing PEO nanofibers are produced by electrospinning. Second, the PEO‐FeCl₃ electrospun fibers are exposed to pyrrole vapor for the synthesis of polypyrrole. The vapor phase polymerization occurs through the diffusion of pyrrole monomer into the nanofibers. The collected non‐woven fiber mat is composed of 96 ± 30 nm diameter PPy‐PEO nanofibers. FT‐IR, XPS, and conductivity measurements confirm polypyrrole synthesis in the nanofiber.

An SEM image of the PPy‐PEO composite nanofibers. The scale bar in the image is 500 nm.