Identification of two Ag‐2,2′:6′,2″‐terpyridine surface species on Ag nanoparticle surfaces by excitation wavelength dependence of SERS spectra and factor analysis: evidence for chemical mechanism contribution to SERS of Ag(0)–tpy

Measurement and interpretation of the excitation wavelength dependence of surface‐enhanced Raman scattering (SERS) spectra of molecules chemisorbed on plasmonic, e.g. Ag nanoparticle (NP) surfaces, are of principal importance for revealing the charge transfer (CT) mechanism contribution to the overall SERS enhancement. SERS spectra, their excitation wavelength dependence in the 445–780‐nm range and factor analysis (FA) were used for the identification of two Ag‐2,2′:6′,2″‐terpyridine (tpy) surface species, denoted Ag⁺–tpy and Ag(0)–tpy, on Ag NPs in systems with unmodified and/or purposefully modified Ag NPs originating from hydroxylamine hydrochloride‐reduced hydrosols. Ag⁺–tpy is a spectral analogue of [Ag(tpy)]⁺ complex cation, and its SERS shows virtually no excitation wavelength dependence. By contrast, SERS of Ag(0)–tpy surface complex generated upon chloride‐induced compact aggregate formation and/or in strongly reducing ambient shows a pronounced excitation wavelength dependence attributed to a CT resonance (the chemical mechanism) contribution to the overall SERS enhancement. Both the resonance (λ_exc = 532 nm) and off‐resonance (λ_exc = 780 nm) pure‐component spectra of Ag(0)–tpy obtained by FA are largely similar to surface‐enhanced resonance Raman scattering (λ_exc = 532 nm in resonance with singlet metal to ligand CT (¹ MLCT) transition) and SERS (λ_exc = 780 nm) spectra of [Fe(tpy)₂]²⁺ complex dication. Copyright © 2014 John Wiley & Sons, Ltd.     

Surface-enhanced Raman spectroscopy of semiconductor nanostructures

We review our recent results concerning surface-enhanced Raman scattering (SERS) by confined optical and surface optical phonons in semiconductor nanostructures including CdS, CuS, GaN, and ZnO nanocrystals, GaN and ZnO nanorods, and AlN nanowires. Enhancement of Raman scattering by confined optical phonons as well as appearance of new Raman modes with the frequencies different from those in ZnO bulk attributed to surface optical modes is observed in a series of nanostructures having different morphology located in the vicinity of metal nanoclusters (Ag, Au, and Pt). Assignment of surface optical modes is based on calculations performed in the frame of the dielectric continuum model. It is established that SERS by phonons has a resonant character. A maximal enhancement by optical phonons as high as 730 is achieved for CdS nanocrystals in double resonant conditions at the coincidence of laser energy with that of electronic transitions in semiconductor nanocrystals and localized surface plasmon resonance in metal nanoclusters. Even a higher enhancement is observed for SERS by surface optical modes in ZnO nanocrystals (above 10⁴). Surface enhanced Raman scattering is used for studying phonon spectrum in nanocrystal ensembles with an ultra-low areal density on metal plasmonic nanostructures.     

纳米Ag材料表面等离子体激元引起的表面增强拉曼散射光谱研究

用热蒸发的方法制备了纳米Ag材料,并用扫描电子显微镜对纳米粒子进行了形貌的表征,通过紫外—可见分光光度计得到Ag纳米粒子的透过谱,得到了Ag纳米粒子的表面等离子体共振的峰值位置.以罗丹明6G为探针分子测定Ag纳米粒子衬底的表面增强拉曼散射效应,通过拉曼散射光谱与透过谱研究了由表面等离子体激元的强极化场引起的表面增强拉曼散射效应,结合透过谱与拉曼增益因子提出了一种描述表面等离子体光学和电学特性的方法,并结合扫描电镜的结果给出了不同结构的纳米Ag材料对表面等离子体激元强度的影响. 关键词： 热蒸发 纳米Ag材料 表面等离子体 表面增强拉曼散射     

Influence of surface plasmon resonance wavelength on SERS activity of naturally grown silver nanoparticle ensemble

We present experimental results to quantify and optimize the surface‐enhanced Raman scattering (SERS) activity of naturally grown silver nanoparticles. Ag nanoparticle ensembles with mean equivalent radii ranging from 10.6 to 20.3 nm were prepared under ultrahigh vacuum conditions by Volmer–Weber growth on quartz plates. A tuning of the localized surface plasmon polariton resonance wavelength from 453 to 548 nm was performed by varying the morphology of the silver nanoparticles. The dependence of the SERS activity on the plasmon resonance wavelength was investigated with a Raman set‐up containing a microsystem light source with an emission line at 488 nm. Shifted excitation Raman difference spectroscopy was applied to remove the fluorescence‐based background from the SERS spectra of pyrene in water using two slightly different emission wavelengths (487.61 and 487.91 nm) of the microsystem light source. We demonstrate that the Raman activities for all SERS substrates are available in the nanomolar range in a water sample. However, the Raman activity crucially depends on the plasmon resonance wavelength of the nanoparticle ensembles. Although for an on‐resonance ensemble the limit of detection for pyrene in water is very low and was estimated to be 2 nmol/L, it increases rapidly to several tens of nanomol for slightly off‐resonance ensembles. Hence, the highest SERS activity was obtained with a nanoparticle ensemble exhibiting a plasmon resonance wavelength at 491 nm, which almost coincides with the excitation wavelengths. Copyright © 2012 John Wiley & Sons, Ltd.     

Adsorption of neurotensin‐family peptides on SERS‐active Ag substrates

Kinetensin (KN) and its amino acids 1–8 fragment ([des‐Leu⁹]KN), neuromedin N (NMN), and xenopsin (XP) and its two analogs (XP‐1 and XP‐2) belong to the neurotensin family of peptides and are known to stimulate the growth of human tumors. In this work, we report Fourier transform‐Raman and surface‐enhanced Raman scattering (SERS) studies of these peptides and discuss their structures, orientation, and mode of adsorption onto a highly specific, electrochemically roughened SERS‐active Ag electrode that is characterized by the formation of a 50–150 nm Ag island on its surface. We show that the investigated peptides bind preferentially to this surface by substantial electronic overlap between the metal surface and the π‐orbitals of the benzene rings of the Phe, Tyr, and Trp residues, which forces them to take parallel or almost parallel orientations with respect to the surface. In addition, the –CH₂–, –CNH₂, and –COO^‐ molecular fragments are involved in interactions with (binding to or in close proximity with) the Ag surface. The SERS data show that the adsorption modes in each of these cases are very similar. In addition, we show that the specific differences in the amino acid sequences do not significantly affect the orientation of the investigated peptides on the Ag substrate. This result implies that the N‐termini of the neurotensin‐family peptides do not influence the mode for adsorption onto the Ag substrates. Copyright © 2012 John Wiley & Sons, Ltd.     

Raman and surface enhanced Raman scattering of a black dyed silk

The Raman and surface enhanced Raman scattering (SERS) spectra of a black dyed silk sample (BDS) were registered. The spectral analysis was performed on the basis of Raman and SERS spectral data of isolated samples of Bombyx mori silk fibroin, its motif peptide component (GAGAGS) and the synthetic reactive black 5 dye (RB5). The macro FT‐Raman spectrum of the silk sample is consistent with a silk II‐Cp crystalline fraction of Bombyx mori silk fibroin; the SERS spectrum is highly consistent with conformational modifications of the fibroin due to the interactions with the Ag nanoparticles. The GAGAGS peptide sequence dominates the Raman spectrum of the silk. The SERS spectrum of the peptide suggests a random coil conformation imposed by the surface interaction; the serine residue in the new conformation is exposed to the surface. Quantum chemical calculations for a model of the GAGAGS–Ag surface predict a nearly extended conformation at the Ag surface. The Raman spectrum of the dye was analysed, and a complete band assignment was proposed; it was not possible to propose a preferential orientation or organization of the molecule on the metal surface. Quantum chemical calculations for a model of the dye interacting with a silver surface predict a rather coplanar orientation of the RB5 on the Ag metal surface. The Raman spectrum of the BDS sample is dominated by signals from the dye; the general spectral behaviour indicates that the dye mainly interacts with the silk through the sulphone (–SO₂–) and sulphonate (–SO₂–O–) groups. Besides the presence of dye signals, mainly ascribed to the sulphone and sulphonate bands, the SERS spectrum of the BDS sample also displays bands belonging to the amino acids alanine, glycine, serine and particularly tyrosine. Copyright © 2013 John Wiley & Sons, Ltd.     

Raman scattering of L‐tryptophan enhanced by surface plasmon of silver nanoparticles: vibrational assignment and structural determination

Vibrational bands of L ‐tryptophan which was adsorbed on Ag nanoparticles (∼10 nm in diameter) have been investigated in the spectral range of 200–1700 cm⁻¹ using surface‐enhanced Raman scattering (SERS) spectroscopy. Compared with the normal Raman scattering (NRS) of L ‐tryptophan in either 0.5 M aqueous solution (NRS‐AS) or solid powder (NRS‐SP), the intensified signals by SERS have made the SERS investigation at a lower molecular concentration (5 × 10⁻⁴ M ) possible. Ab initio calculations at the B3LYP/6‐311G level have been carried out to predict the optimal structure and vibrational wavenumbers for the zwitterionic form of L ‐tryptophan. Facilitated with the theoretical prediction, the observed vibrational modes of L ‐tryptophan in the NRS‐AS, NRS‐SP, and SERS spectra have been analyzed. In the spectroscopic observations, there are no significant changes for the vibrational bands of the indole ring in either NRS‐AS, NRS‐SP, or SERS. In contrast, spectral intensities involving the vibrations of carboxylate and amino groups are weak in NRS‐AS and NRS‐SP, but strong in SERS. The intensity enhancement in the SERS spectrum can reach 10³–10⁴‐fold magnification. On the basis of spectroscopic analysis, the carboxylate and amino groups of L ‐tryptophan are determined to be the preferential terminal groups to attach onto the surfaces of Ag nanoparticles in the SERS measurement. Copyright © 2008 John Wiley & Sons, Ltd.     

Nanogaps in 2D Ag‐nanocap arrays for surface‐enhanced Raman scattering

The surface‐enhanced Raman scattering substrate of Ag–Ag nanocap arrays are prepared by depositing Ag film onto two‐dimensional (2D) polystyrene colloidal nanosphere templates. When the original colloidal arrays are used as the substrate for Ag deposition, surface‐enhanced Raman scattering (SERS) enhancements show the strong size‐dependence behaviours. When O₂‐plasma etched 2D polystyrene templates are used as the substrate for Ag deposition to form nanogaps, the gap sizes between adjacent Ag nanocaps from 5 to 20 nm generate even greater SERS enhancements. When SiO₂ coverage is deposited to isolate the Ag nanocaps from the neighbours, the SERS signals are enhanced more. The significant SERS effects are due to the coupling between Ag nanocaps controlled by the distance, which enhances the local electric‐field intensity. Copyright © 2013 John Wiley & Sons, Ltd.     

Charge‐transfer contributions in surface‐enhanced Raman scattering from Ag,Ag2S and Ag2Se substrates

The degree of charge‐transfer in Ag–4‐mercaptopyridine (Mpy) and Ag₂S–4‐Mpy systems is investigated by use of surface‐enhanced Raman spectroscopy (SERS). Ag₂S and Ag₂Se nanoparticles are prepared on the basis of the former formation of Ag nanoparticles to make the SERS analytical objects comparable. We utilize the intensity of the non‐totally symmetric modes (either b₁ or b₂) as compared with the totally symmetric a₁ modes to measure the degree of charge‐transfer. We find ~25% of charge‐transfer contribution for Ag–4‐Mpy, whereas 81 ~ 93% for Ag₂S–4‐Mpy. It means that the charge‐transfer resonance contribution dominates the overall enhancement in SERS of Ag₂S–4‐Mpy. Energy level diagram is applied to discuss the likely charge‐transfer transition between Ag, Ag₂S, Ag₂Se and 4‐Mpy. This article may point out the link among the three main resonance sources and could enable some insights into the electronic pathways available to the metal‐molecule and semiconductor‐molecule systems. Copyright © 2012 John Wiley & Sons, Ltd.     

Electrical field analysis of metal‐surface plasmon resonance using a biaxially strained Si substrate

Electrical field components of metal‐surface plasmon resonance were analyzed in detail. Both longitudinal optical (LO) and transverse optical (TO) phonon modes of a biaxially strained Si layer can be excited by surface‐enhanced Raman spectroscopy (SERS). The z to y polarization ratio in SERS measurements was calculated to be 0.78 using the intensity ratio of TO to LO phonon modes. The electrical field components of SERS were also calculated by the finite‐difference time‐domain method. Copyright © 2014 John Wiley & Sons, Ltd.     

Detection of biologically active diterpenoic acids by Raman Spectroscopy

Three poorly detectable, biologically active diterpenoic acids, kaurenoic, abietic, and gibberellic acid, were studied by using different modes of Raman spectroscopy. Because of their structural similarities, in the absence of strongly polarizable groups, conventional Raman spectroscopy is not suitable for their unambiguous identification, especially not in solution. We attempted to increase the sensitivity by applying UV‐resonance Raman spectroscopy and surface‐enhanced Raman spectroscopy (SERS) techniques. The UV‐Raman spectra of the three compounds in ethanol/water 50:50 showed only very few enhanced Raman lines. SERS spectra with 514‐nm excitation with Ag colloids were also relatively weak. The best SERS spectra were obtained with 785‐nm excitation on a novel nanostructured substrate, ‘black silicon’ coated with a 400‐nm gold layer. The spectra showed clear differences, and these ‘fingerprints’ would be suitable for the unambiguous identification of these diterpenoic acids. Copyright © 2009 John Wiley & Sons, Ltd.     

SERS signal response and SERS/SERDS spectra of fluoranthene in water on naturally grown Ag nanoparticle ensembles

We present experimental results of the time‐dependent Raman signal response of fluoranthene adsorbed on a naturally grown Ag nanoparticle ensemble, which serves as surface enhanced Raman scattering (SERS) substrate. In addition, SERS characteristics such as the concentration‐dependent calibration curves and the limit of detection (LOD) for fluoranthene in distilled water will be shown. The SERS substrate was prepared by Volmer–Weber growth under ultrahigh vacuum condition and exhibits a plasmon resonance wavelength at 491 nm. For the measurement of SERS signal response and SERS/shifted excitation Raman difference spectroscopy spectra of fluoranthene in water, experimental Raman setup containing a microsystem light source with two emission wavelengths (487.61 nm and 487.91 nm) was used. We experimentally demonstrate that the maximum SERS intensity is achieved 9 min after changing the analyte concentration from 0 nmol/l to 600 nmol/l. This response time is explained by a time‐dependent adsorption of the probe molecules onto the nanoparticles. The LOD for fluoranthene in water was evaluated applying shifted excitation Raman difference spectroscopy (SERDS) at different molecule concentrations. For SERDS, two emission wavelengths of a prototype microsystem light source have been used for Raman excitation. The experimental results reveal that the LOD for the probe molecules is very low. Experimentally, we have detected a fluoranthene concentration of only 4 nmol/l, which is very close to our estimated LOD of 2 nmol/l. Thus, the presented Raman setup, with a SERS substrate, whose plasmon resonance coincides with the excitation wavelength for SERS measurements, is well suited for in‐situ trace detection of pollutant chemicals in water. Copyright © 2013 John Wiley & Sons, Ltd.     

银电极表面上C60薄膜的表面增强拉曼光谱研究

在银电极表面形成一层C60薄膜,分别在乙腈溶液和水溶液中进行表面增强拉曼光谱(SERS)研究并将两者进行比较,从而消除了溶液中的C60干扰表面吸附C60的SERS谱图的可能性.研究结果表明,C60分子对称性的降低导致SERS谱峰发生了分裂;表面电磁场的作用使得光谱选律在SERS效应中被拓宽,产生了新的拉曼谱峰.该结果与团簇吸附在粗糙银电极表面的C60分子的研究结果相似.与之不同的是在乙腈溶液和水溶液中的SERS谱图的低波数区内分别在348和311 cm-1左右出现一个新峰,经过分析可认为该峰与C60-金属基底的相互作用有关.     

Concentration‐dependent surface‐enhanced Raman scattering and molecular dynamic study of dimethyl formamide

A concentration‐dependent Raman study of dimethyl formamide (DMF) in Ag nanocolloidal solution was carried out in order to observe the effect of concentration on the surface enhancement mechanism. The Raman spectra in the region 900–2200 cm⁻¹ comprising four prominent Raman modes were measured experimentally and analyzed at five different concentrations: 1, 3, 5, 7, 10 mM , and in neat DMF. In order to find the possible configurations of DMF + Ag complexes, density functional theory (DFT) calculations were carried out taking one, three and five Ag atom clusters. The Raman spectra of unconjugated DMF, DMF + Ag and DMF + 3Ag complexes were calculated theoretically to assign the vibrational modes under consideration more accurately and to understand the wavenumber shift and change in intensity observed in experimental measurements. Water present in the colloidal solution may also conjugate with DMF and its complexes with Ag. In order to see the influence of water on the wavenumber shift and intensity changes, we have also obtained the optimized structures and Raman modes of DMF + water and DMF + water + Ag complexes. Good agreement between the experimental and theoretical wavenumber shifts has been obtained by using B3LYP functional theory and CEP‐31G basis set for the DMF + Ag complex. The experimental results suggest that the SERS enhancement is concentration‐dependent. The concentration‐dependent linewidth shows the existence of the phenomena of motional narrowing and diffusion dynamics in the colloidal solution. Copyright © 2007 John Wiley & Sons, Ltd.     

Controlling SERS intensity by tuning the size and height of a silver nanoparticle array

It is demonstrated that the surface-enhanced Raman scattering (SERS) intensity of R6G molecules adsorbed on a Ag nanoparticle array can be controlled by tuning the size and height of the nanoparticles. A firm Ag nanoparticle array was fabricated on glass substrate by using nanosphere lithography (NSL) combined with reactive ion etching (RIE). Different sizes of Ag nanoparticles were fabricated with seed polystyrene nanospheres ranging from 430 nm to 820 nm in diameter. By depositing different thicknesses of Ag film and lifting off nanospheres from the surface of the substrate, the height of the Ag nanoparticles can be tuned. It is observed that the SERS enhancement factor will increase when the size of the Ag nanoparticles decreases and the deposition thickness of the Ag film increases. An enhancement factor as high as 2×10⁶ can be achieved when the size of the polystyrene nanospheres is 430 nm in diameter and the height of the Ag nanoparticles is 96 nm. By using a confocal Raman mapping technique, we also demonstrate that the intensity of Raman scattering is enhanced due to the local surface plasmon resonance (LSPR) occurring in the Ag nanoparticle array.     

Potential‐induced Raman behavior of individual (R)‐di‐2‐naphthylprolinol molecules on a Ag‐modified Ag electrode

The applicability of surface‐enhanced Raman spectroscopy is demonstrated to probe the adsorption behavior of individual molecules on a Ag electrode. High‐quality SERS spectra of (R)‐di‐2‐naphthylprolinol (DNP) were obtained from ultradilute solutions (10⁻¹² M ) on the Ag‐nanoparticle‐modified Ag electrode, which is attributed to the high electromagnetic (EM) effect of the SERS‐active system as well as to the strong adsorption and interaction of DNP molecules with Ag. The stable SERS spectra present remarkable potential dependence, which gives evidence for the behavior of individual DNP molecules on the Ag surface. Based on statistical analysis for the probability of DNP molecules located in ‘hot spots’, we propose an SERS mechanism for individual molecules in the electrode system, in combination with the hot‐spot model and orientation of the probe molecules. Copyright © 2010 John Wiley & Sons, Ltd.     

The effect of underpotentially deposited Pb on the surface enhanced Raman scattering ability of polycrystalline Ag

The effect of submonolayer and monolayer amounts of Pb deposited at underpotential on a polycrystalline Ag electrode surface on the surface enhanced Raman scattering behavior of pyridine and Cl^? adsorbates is presented. Surfaces covered by greater than 70% of a Pb monolayer do not support significant surface enhancement. The changes observed in SERS intensity as a function of fractional Pb coverage are interpreted in terms of changes in surface electronic properties and changes in adsorbate coverage. Evidence for changes in the structure of the Pb overlayer is also presented. Investigation of the reversibility of the SERS behavior after deposition and quantitative stripping of varying amounts of Pb provides information on the roles played by various sizes of surface roughness in SERS. These data suggest that both large scale and atomic scale roughness contribute to the SERS intensities measured in these systems.     

Theoretical elucidation of the origin of surface‐enhanced Raman spectra of PCB52 adsorbed on silver substrates

To better understand experimentally observed surface‐enhanced Raman Scattering (SERS) of polychlorinated biphenyls (PCBs) adsorbed on nanoscaled silver substrates, a systematic theoretical study was performed by carrying out density functional theory and time‐dependent density functional theory calculations. 2,2′,5,5′‐tetrachlorobiphenyl (PCB52) was chosen as a model molecule of PCBs, and Ag_n (n = 2, 4, 6, and 10) clusters were used to mimic active sites of substrates. Calculated normal Raman spectra of PCB52–Ag_n (n = 2, 4, 6, and 10) complexes are analogical in profile to that of isolated PCB52 with only slightly enhanced intensity. In contrast, the corresponding SERS spectra calculated at adopted incident light are strongly enhanced, and the calculated enhancement factors are 10⁴ ~ 10⁵. Thus, the experimentally observed SERS phenomenon of PCBs supported on Ag substrates should correspond to the SERS spectra rather than the normal Raman spectra. The dominant enhancement in Raman intensities origins from the charge transfer resonance enhancement between the molecule and clusters. Copyright © 2014 John Wiley & Sons, Ltd.     

Silver‐decorated carbon nanotube networks as SERS substrates

We report on investigations upon a surface‐enhanced Raman scattering (SERS) substrate produced from a two‐dimensional single‐walled carbon nanotube (SWNT) network decorated with Ag nanoparticles. Using the strong and unique Raman spectrum of SWNTs as a reference, the SWNT/Ag nanostructure can be considered to provide two regions: one with an ultrasensitive SERS response for single‐molecule SERS (SMSERS) study; and another with uniform SERS enhancement over an area of several square millimeters for general SERS measurements. We report the appearance of an anomalous Raman feature at around 2180 cm⁻¹ in the high‐sensitivity region which exhibits the characteristics of SMSERS. The SERS performance of the uniform area was characterized using pyridine vapor adsorbed onto the substrate. The presence of the SWNT/Ag nanostructure enhanced the Raman intensity by over seven orders of magnitude, a factor comparable to or exceeding that obtained on SERS substrates reported by other groups. The results indicate great potential to produce highly sensitive, uniform SERS substrates via further fine‐tuning of the nanostructure. Copyright © 2011 John Wiley & Sons, Ltd.     

巯基苯并咪唑在银电极表面的自组装吸附特性及表面增强拉曼光谱

采用循环伏安法处理Ag电极,得到活化的具有表面增强拉曼光谱(SERS)效应的粗糙Ag表面,进一步采用激光拉曼光谱探讨了2-巯基苯并咪唑(MBI)在其表面的自组装分子层的吸附特性。实验表明,在活性Ag表面的MBI自组装分子层能够产生理想的SERS效应,其强度随探针分子MBI浓度的增加先提高后减弱,达到一定浓度时因受其空间位阻等因素的影响,增强效应减弱。MBI在1×10^-6 mol·L^-1 浓度时增强效果最大。拉曼增强效应随着体系酸度的变化有着明显不同,在强酸性条件下的增强效应明显优于中性和碱性条件。MBI分子存在两种不同的异构体和在不同酸度下存在3种不同的存在形态,并形成动态平衡。pH <2时,MBI分子主要以硫酮式MBI⁺存在,并以巯基上的S:与活性Ag以配位方式吸附成键,其整个大π键平面垂直地吸附于Ag表面,产生相对较大的SERS信号。pH >2时,由于硫酮式和硫醇式与活性Ag的键合方式和能力不同,硫醇式上的S与Ag以S-Ag共价方式同时双键侧上的N以配位方式协同参与吸附成键,比硫酮式MBI⁺的单纯配位吸附要强,因而形成了竞争吸附,表现为SERS在pH=2~3.7之间的急剧下降。MBI硫醇式由于以S-Ag、N-Ag键的协同吸附,形成了倾斜侧卧式垂直吸附,而使拉曼增强效应相对减弱。